Input: tm2-touchkey - add touchkey driver support for TM2
This patch adds support for the TM2 touch key and led functionality. The driver interfaces with userspace through an input device and reports KEY_PHONE and KEY_BACK event types. LED brightness can be controlled by "/sys/class/leds/tm2-touchkey/brightness". Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Jaechul Lee
Dmitry Torokhov
parent
aa6f922221
commit
72d1f2346d
@ -0,0 +1,27 @@
|
||||
Samsung tm2-touchkey
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "cypress,tm2-touchkey"
|
||||
- reg: I2C address of the chip.
|
||||
- interrupt-parent: a phandle for the interrupt controller (see interrupt
|
||||
binding[0]).
|
||||
- interrupts: interrupt to which the chip is connected (see interrupt
|
||||
binding[0]).
|
||||
- vcc-supply : internal regulator output. 1.8V
|
||||
- vdd-supply : power supply for IC 3.3V
|
||||
|
||||
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
||||
|
||||
Example:
|
||||
&i2c0 {
|
||||
/* ... */
|
||||
|
||||
touchkey@20 {
|
||||
compatible = "cypress,tm2-touchkey";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpa3>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
||||
vcc-supply=<&ldo32_reg>;
|
||||
vdd-supply=<&ldo33_reg>;
|
||||
};
|
||||
};
|
||||
@ -666,6 +666,17 @@ config KEYBOARD_TC3589X
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called tc3589x-keypad.
|
||||
|
||||
config KEYBOARD_TM2_TOUCHKEY
|
||||
tristate "TM2 touchkey support"
|
||||
depends on I2C
|
||||
depends on LEDS_CLASS
|
||||
help
|
||||
Say Y here to enable device driver for tm2-touchkey with
|
||||
LED control for the Exynos5433 TM2 board.
|
||||
|
||||
To compile this driver as a module, choose M here.
|
||||
module will be called tm2-touchkey.
|
||||
|
||||
config KEYBOARD_TWL4030
|
||||
tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
|
||||
depends on TWL4030_CORE
|
||||
|
||||
@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o
|
||||
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
|
||||
obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
|
||||
obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
|
||||
obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o
|
||||
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
|
||||
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
|
||||
obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
|
||||
|
||||
286
drivers/input/keyboard/tm2-touchkey.c
Normal file
286
drivers/input/keyboard/tm2-touchkey.c
Normal file
@ -0,0 +1,286 @@
|
||||
/*
|
||||
* TM2 touchkey device driver
|
||||
*
|
||||
* Copyright 2005 Phil Blundell
|
||||
* Copyright 2016 Samsung Electronics Co., Ltd.
|
||||
*
|
||||
* Author: Beomho Seo <beomho.seo@samsung.com>
|
||||
* Author: Jaechul Lee <jcsing.lee@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
|
||||
#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey"
|
||||
#define TM2_TOUCHKEY_KEYCODE_REG 0x03
|
||||
#define TM2_TOUCHKEY_BASE_REG 0x00
|
||||
#define TM2_TOUCHKEY_CMD_LED_ON 0x10
|
||||
#define TM2_TOUCHKEY_CMD_LED_OFF 0x20
|
||||
#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3)
|
||||
#define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0)
|
||||
#define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000
|
||||
#define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000
|
||||
|
||||
enum {
|
||||
TM2_TOUCHKEY_KEY_MENU = 0x1,
|
||||
TM2_TOUCHKEY_KEY_BACK,
|
||||
};
|
||||
|
||||
struct tm2_touchkey_data {
|
||||
struct i2c_client *client;
|
||||
struct input_dev *input_dev;
|
||||
struct led_classdev led_dev;
|
||||
struct regulator *vdd;
|
||||
struct regulator_bulk_data regulators[2];
|
||||
};
|
||||
|
||||
static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
|
||||
enum led_brightness brightness)
|
||||
{
|
||||
struct tm2_touchkey_data *touchkey =
|
||||
container_of(led_dev, struct tm2_touchkey_data, led_dev);
|
||||
u32 volt;
|
||||
u8 data;
|
||||
|
||||
if (brightness == LED_OFF) {
|
||||
volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
|
||||
data = TM2_TOUCHKEY_CMD_LED_OFF;
|
||||
} else {
|
||||
volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
|
||||
data = TM2_TOUCHKEY_CMD_LED_ON;
|
||||
}
|
||||
|
||||
regulator_set_voltage(touchkey->vdd, volt, volt);
|
||||
i2c_smbus_write_byte_data(touchkey->client,
|
||||
TM2_TOUCHKEY_BASE_REG, data);
|
||||
}
|
||||
|
||||
static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
|
||||
{
|
||||
int error;
|
||||
|
||||
error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators),
|
||||
touchkey->regulators);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
/* waiting for device initialization, at least 150ms */
|
||||
msleep(150);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void tm2_touchkey_power_disable(void *data)
|
||||
{
|
||||
struct tm2_touchkey_data *touchkey = data;
|
||||
|
||||
regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators),
|
||||
touchkey->regulators);
|
||||
}
|
||||
|
||||
static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
|
||||
{
|
||||
struct tm2_touchkey_data *touchkey = devid;
|
||||
int data;
|
||||
int key;
|
||||
|
||||
data = i2c_smbus_read_byte_data(touchkey->client,
|
||||
TM2_TOUCHKEY_KEYCODE_REG);
|
||||
if (data < 0) {
|
||||
dev_err(&touchkey->client->dev,
|
||||
"failed to read i2c data: %d\n", data);
|
||||
goto out;
|
||||
}
|
||||
|
||||
switch (data & TM2_TOUCHKEY_BIT_KEYCODE) {
|
||||
case TM2_TOUCHKEY_KEY_MENU:
|
||||
key = KEY_PHONE;
|
||||
break;
|
||||
|
||||
case TM2_TOUCHKEY_KEY_BACK:
|
||||
key = KEY_BACK;
|
||||
break;
|
||||
|
||||
default:
|
||||
dev_warn(&touchkey->client->dev,
|
||||
"unhandled keycode, data %#02x\n", data);
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
|
||||
input_report_key(touchkey->input_dev, KEY_PHONE, 0);
|
||||
input_report_key(touchkey->input_dev, KEY_BACK, 0);
|
||||
} else {
|
||||
input_report_key(touchkey->input_dev, key, 1);
|
||||
}
|
||||
|
||||
input_sync(touchkey->input_dev);
|
||||
|
||||
out:
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int tm2_touchkey_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct tm2_touchkey_data *touchkey;
|
||||
int error;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) {
|
||||
dev_err(&client->dev, "incompatible I2C adapter\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL);
|
||||
if (!touchkey)
|
||||
return -ENOMEM;
|
||||
|
||||
touchkey->client = client;
|
||||
i2c_set_clientdata(client, touchkey);
|
||||
|
||||
touchkey->regulators[0].supply = "vcc";
|
||||
touchkey->regulators[1].supply = "vdd";
|
||||
error = devm_regulator_bulk_get(&client->dev,
|
||||
ARRAY_SIZE(touchkey->regulators),
|
||||
touchkey->regulators);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "failed to get regulators: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
/* Save VDD for easy access */
|
||||
touchkey->vdd = touchkey->regulators[1].consumer;
|
||||
|
||||
error = tm2_touchkey_power_enable(touchkey);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "failed to power up device: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
error = devm_add_action_or_reset(&client->dev,
|
||||
tm2_touchkey_power_disable, touchkey);
|
||||
if (error) {
|
||||
dev_err(&client->dev,
|
||||
"failed to install poweroff handler: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
/* input device */
|
||||
touchkey->input_dev = devm_input_allocate_device(&client->dev);
|
||||
if (!touchkey->input_dev) {
|
||||
dev_err(&client->dev, "failed to allocate input device\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
|
||||
touchkey->input_dev->id.bustype = BUS_I2C;
|
||||
|
||||
input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE);
|
||||
input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK);
|
||||
|
||||
input_set_drvdata(touchkey->input_dev, touchkey);
|
||||
|
||||
error = input_register_device(touchkey->input_dev);
|
||||
if (error) {
|
||||
dev_err(&client->dev,
|
||||
"failed to register input device: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
error = devm_request_threaded_irq(&client->dev, client->irq,
|
||||
NULL, tm2_touchkey_irq_handler,
|
||||
IRQF_ONESHOT,
|
||||
TM2_TOUCHKEY_DEV_NAME, touchkey);
|
||||
if (error) {
|
||||
dev_err(&client->dev,
|
||||
"failed to request threaded irq: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
/* led device */
|
||||
touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
|
||||
touchkey->led_dev.brightness = LED_FULL;
|
||||
touchkey->led_dev.max_brightness = LED_FULL;
|
||||
touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
|
||||
|
||||
error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
|
||||
if (error) {
|
||||
dev_err(&client->dev,
|
||||
"failed to register touchkey led: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused tm2_touchkey_suspend(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
|
||||
|
||||
disable_irq(client->irq);
|
||||
tm2_touchkey_power_disable(touchkey);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused tm2_touchkey_resume(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
|
||||
int ret;
|
||||
|
||||
enable_irq(client->irq);
|
||||
|
||||
ret = tm2_touchkey_power_enable(touchkey);
|
||||
if (ret)
|
||||
dev_err(dev, "failed to enable power: %d\n", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops,
|
||||
tm2_touchkey_suspend, tm2_touchkey_resume);
|
||||
|
||||
static const struct i2c_device_id tm2_touchkey_id_table[] = {
|
||||
{ TM2_TOUCHKEY_DEV_NAME, 0 },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table);
|
||||
|
||||
static const struct of_device_id tm2_touchkey_of_match[] = {
|
||||
{ .compatible = "cypress,tm2-touchkey", },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);
|
||||
|
||||
static struct i2c_driver tm2_touchkey_driver = {
|
||||
.driver = {
|
||||
.name = TM2_TOUCHKEY_DEV_NAME,
|
||||
.pm = &tm2_touchkey_pm_ops,
|
||||
.of_match_table = of_match_ptr(tm2_touchkey_of_match),
|
||||
},
|
||||
.probe = tm2_touchkey_probe,
|
||||
.id_table = tm2_touchkey_id_table,
|
||||
};
|
||||
module_i2c_driver(tm2_touchkey_driver);
|
||||
|
||||
MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
|
||||
MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>");
|
||||
MODULE_DESCRIPTION("Samsung touchkey driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user