From 72f7fc3050d55e9877ecc56f33b7a434fca186f5 Mon Sep 17 00:00:00 2001 From: Xiaofei Tan Date: Sat, 9 Dec 2017 01:16:43 +0800 Subject: [PATCH] scsi: hisi_sas: add v2 hw port AXI error handling support Add port AXI errors handling for v2 hw. We do host controller reset for such errors. Besides, change port muli-bits ECC error handling, and we should also do host reset for such error. So, this patch put them in the same struct with port AXI error. Signed-off-by: Xiaofei Tan Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 51 +++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 4c4a000c5db0..725731125177 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -240,6 +240,10 @@ #define CHL_INT1_DMAC_TX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_TX_ECC_ERR_OFF) #define CHL_INT1_DMAC_RX_ECC_ERR_OFF 17 #define CHL_INT1_DMAC_RX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_RX_ECC_ERR_OFF) +#define CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF 19 +#define CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF 20 +#define CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF 21 +#define CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF 22 #define CHL_INT2 (PORT_BASE + 0x1bc) #define CHL_INT0_MSK (PORT_BASE + 0x1c0) #define CHL_INT1_MSK (PORT_BASE + 0x1c4) @@ -1182,7 +1186,7 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba) hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff); hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xfff87fff); hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000); - hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xff857fff); hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8ffffbff); hisi_sas_phy_write32(hisi_hba, i, SL_CFG, 0x13f801fc); hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0); @@ -2832,6 +2836,33 @@ static void phy_bcast_v2_hw(int phy_no, struct hisi_hba *hisi_hba) hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 0); } +static const struct hisi_sas_hw_error port_ecc_axi_error[] = { + { + .irq_msk = BIT(CHL_INT1_DMAC_TX_ECC_ERR_OFF), + .msg = "dmac_tx_ecc_bad_err", + }, + { + .irq_msk = BIT(CHL_INT1_DMAC_RX_ECC_ERR_OFF), + .msg = "dmac_rx_ecc_bad_err", + }, + { + .irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF), + .msg = "dma_tx_axi_wr_err", + }, + { + .irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF), + .msg = "dma_tx_axi_rd_err", + }, + { + .irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF), + .msg = "dma_rx_axi_wr_err", + }, + { + .irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF), + .msg = "dma_rx_axi_rd_err", + }, +}; + static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p) { struct hisi_hba *hisi_hba = p; @@ -2856,11 +2887,19 @@ static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p) CHL_INT2); if ((irq_msk & (1 << phy_no)) && irq_value1) { - if (irq_value1 & (CHL_INT1_DMAC_RX_ECC_ERR_MSK | - CHL_INT1_DMAC_TX_ECC_ERR_MSK)) - panic("%s: DMAC RX/TX ecc bad error!\ - (0x%x)", - dev_name(dev), irq_value1); + int i; + + for (i = 0; i < ARRAY_SIZE(port_ecc_axi_error); i++) { + const struct hisi_sas_hw_error *error = + &port_ecc_axi_error[i]; + + if (!(irq_value1 & error->irq_msk)) + continue; + + dev_warn(dev, "%s error (phy%d 0x%x) found!\n", + error->msg, phy_no, irq_value1); + queue_work(hisi_hba->wq, &hisi_hba->rst_work); + } hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT1, irq_value1);