fix typos concerning "hierarchy"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

arch/arm/mach-omap2/dpll3xxx.c

@@ -463,7 +463,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	}
 	if (!ret) {
 		/*
-		 * Switch the parent clock in the heirarchy, and make sure
+		 * Switch the parent clock in the hierarchy, and make sure
 		 * that the new parent's usecount is correct.  Note: we
 		 * enable the new parent before disabling the old to avoid
 		 * any unnecessary hardware disable->enable transitions.

arch/microblaze/Makefile

@@ -25,7 +25,7 @@ ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
   ifeq ($(CPU_MAJOR),3)
     CPUFLAGS-1 += -mno-xl-soft-mul
   else
-    # USE_HW_MUL can be 0, 1, or 2, defining a heirarchy of HW Mul support.
+    # USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
     CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
     CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
   endif

drivers/infiniband/hw/cxgb3/iwch_qp.c

@@ -816,7 +816,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
 	atomic_inc(&qhp->refcnt);
 	spin_unlock_irqrestore(&qhp->lock, *flag);
 
-	/* locking heirarchy: cq lock first, then qp lock. */
+	/* locking hierarchy: cq lock first, then qp lock. */
 	spin_lock_irqsave(&rchp->lock, *flag);
 	spin_lock(&qhp->lock);
 	cxio_flush_hw_cq(&rchp->cq);
@@ -827,7 +827,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
 	if (flushed)
 		(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
 
-	/* locking heirarchy: cq lock first, then qp lock. */
+	/* locking hierarchy: cq lock first, then qp lock. */
 	spin_lock_irqsave(&schp->lock, *flag);
 	spin_lock(&qhp->lock);
 	cxio_flush_hw_cq(&schp->cq);

drivers/infiniband/hw/cxgb4/qp.c

@@ -899,7 +899,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
 	atomic_inc(&qhp->refcnt);
 	spin_unlock_irqrestore(&qhp->lock, *flag);
 
-	/* locking heirarchy: cq lock first, then qp lock. */
+	/* locking hierarchy: cq lock first, then qp lock. */
 	spin_lock_irqsave(&rchp->lock, *flag);
 	spin_lock(&qhp->lock);
 	c4iw_flush_hw_cq(&rchp->cq);
@@ -910,7 +910,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
 	if (flushed)
 		(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
 
-	/* locking heirarchy: cq lock first, then qp lock. */
+	/* locking hierarchy: cq lock first, then qp lock. */
 	spin_lock_irqsave(&schp->lock, *flag);
 	spin_lock(&qhp->lock);
 	c4iw_flush_hw_cq(&schp->cq);

drivers/scsi/libfc/fc_lport.c

@@ -32,11 +32,11 @@
  * invalid SID. We also need to ensure that states don't change unexpectedly
  * while processing another state.
  *
- * HEIRARCHY
+ * HIERARCHY
  *
- * The following heirarchy defines the locking rules. A greater lock
+ * The following hierarchy defines the locking rules. A greater lock
  * may be held before acquiring a lesser lock, but a lesser lock should never
- * be held while attempting to acquire a greater lock. Here is the heirarchy-
+ * be held while attempting to acquire a greater lock. Here is the hierarchy-
  *
  * lport > disc, lport > rport, disc > rport
  *

drivers/scsi/libfc/fc_rport.c

@@ -34,7 +34,7 @@
  * The rport should never hold the rport mutex and then attempt to acquire
  * either the lport or disc mutexes. The rport's mutex is considered lesser
  * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
- * more comments on the heirarchy.
+ * more comments on the hierarchy.
  *
  * The locking strategy is similar to the lport's strategy. The lock protects
  * the rport's states and is held and released by the entry points to the rport

drivers/scsi/scsi_transport_fc.c

@@ -965,7 +965,7 @@ static FC_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR,
 
 /*
  * Note: in the target show function we recognize when the remote
- *  port is in the heirarchy and do not allow the driver to get
+ *  port is in the hierarchy and do not allow the driver to get
  *  involved in sysfs functions. The driver only gets involved if
  *  it's the "old" style that doesn't use rports.
  */

kernel/cpuset.c

@@ -105,7 +105,7 @@ struct cpuset {
 	/* for custom sched domain */
 	int relax_domain_level;
 
-	/* used for walking a cpuset heirarchy */
+	/* used for walking a cpuset hierarchy */
 	struct list_head stack_list;
 };