iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

New board the Radxa Rock Pi S, enablement of graphics support and hdmi-audio

Browse Source 
on rk356x in general plus necessary board-specific changes on Rock-3A,
 Quartz64-A, rk3568-evb, BPI-R2-Pro.
 
 A number of additional peripherals on BPI-R2-Pro (gpu, thermal, rtc) and
 PCIe2x1 support on rk3568 and enablement on Quart64-A as well as a number
 of additional peripherals to this board (sfc node, sdr-104 support, fan).
 
 And finally touch panel support for rockpro64 and some misc dt cleanups
 (node names for dtschema and styling).
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmLEGlUQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgcG+CACtfU9yrfAxElsWY2cxkPJm3nV+rA6jO3VX
 HLPFjyQ6XJlpHGQrKge38HPCaq/8tynxgt4mykdE3mUn7I8OCTylzW5OUtue4yJU
 D35JHQbuhk79MlfgkD7Wp2iz9jwB64JgeCLzbVfUq5f7CiBqc9R1StWZwYqdlJ87
 PS3dAGfO6hswJmbF2f4u2bc0OzPfQs0KkreiN2YkfmzffMo28VDGmumj2IPEPGEI
 h7eHLrJT721YTaXXkErd0j9Fen6lngQybGoLGThBYxzLrfshRulW1uR6Ykx1PQBA
 rz3nq9YhHaWz0uVn6EIN95c76LLkgU/WE5dypjduT12i21wQ/42y
 =shlA
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLFc/4ACgkQmmx57+YA
 GNktbQ//XNZFy22cJ6KiTJfjTudj5q1DfqJDZZPP8rwiV4rGUZu5GoxEp4gAfvky
 Ds69aqemEOW4SU3XX8tNPp+6CulnZImSgXDiIHzMC8MMakR3Kj8si6NttA10/USO
 EOUx/LJU7HxEsOQL2lmGi55eyoYZz7rOgzqa1W2rMOdzX/ytmvk124u6J5TDX2/8
 w0i66LCTvlf+4P/+QK7riwOuzYxsWNaJgSg/+bVtfZwCXfddmDdYvh/JsrQKR7O8
 uHDiE1FSBnn3Lyt1anNH8Lmya69vYmZpEkcMVMGAQPZ7WDIPPTVgH4mzOLmrLges
 WbQtDWe3K5AETZ5hQDdnBkVfiGtPd0Nnb+jbU0VYWNRDupiptoHwYbORupOAmd6Z
 iciexDxREu7Z4qBmOVFKsgKpLKJZUFT7hXxvU8Mqpwx9XLufT347ehUj/mLxMMpn
 HnAB+URzdI7RP2m9g0bMDQZIR48BAyu/pS2r+Q2hw/NJTrC3Y9RIb2xqjNp4+r4N
 SYdSbGs0iZXZzEbor/INWd3ImdqDV/B5SXEhE0GmJBaXy2s3BN8/jMboewr5+Mxt
 oSM+Lbidcb2FhOpAB2eTVbLoJ+bkyzqY8WYlBNj6QjEll2pDz+ff3uuIZ3Ka7aBB
 0Org6/qdQ7kphklAz93td0zjTOtiF5bgQswpe78evpdZie5dyw8=
 =owCF
 -----END PGP SIGNATURE-----

Merge tag 'v5.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New board the Radxa Rock Pi S, enablement of graphics support and hdmi-audio
on rk356x in general plus necessary board-specific changes on Rock-3A,
Quartz64-A, rk3568-evb, BPI-R2-Pro.

A number of additional peripherals on BPI-R2-Pro (gpu, thermal, rtc) and
PCIe2x1 support on rk3568 and enablement on Quart64-A as well as a number
of additional peripherals to this board (sfc node, sdr-104 support, fan).

And finally touch panel support for rockpro64 and some misc dt cleanups
(node names for dtschema and styling).

* tag 'v5.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
  arm64: dts: rockchip: enable hdmi tx audio on rock-3a
  arm64: dts: rockchip: enable hdmi tx audio on rk3568-evb1-v10
  arm64: dts: rockchip: align gpio-key node names with dtschema
  arm64: dts: rockchip: rock-pi-s add more peripherals
  arm64: dts: rockchip: add ROCK Pi S DTS support
  dt-bindings: arm: rockchip: Add Radxa ROCK Pi S
  arm64: dts: rockchip: Add missing space around regulator-name on rk3368-orion-r68
  arm64: dts: rockchip: enable the gpu on BPI-R2-Pro
  arm64: dts: rockchip: configure thermal shutdown for BPI-R2-Pro
  arm64: dts: rockchip: Enable HDMI audio on BPI R2 Pro
  arm64: dts: rockchip: enable vop2 and hdmi tx on BPI-R2-Pro
  arm64: dts: rockchip: set display regulators to always-on on BPI-R2-Pro
  arm64: dts: rockchip: add RTC to BPI-R2 Pro
  arm64: dts: rockchip: Enable HDMI audio on Quartz64 A
  arm64: dts: rockchip: Add HDMI audio nodes to rk356x
  arm64: dts: rockchip: adjust whitespace around '='
  arm64: dts: rockchip: enable vop2 and hdmi tx on rock-3a
  arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a
  arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
  arm64: dts: rockchip: rk356x: Add HDMI nodes
  ...

Link: https://lore.kernel.org/r/40088956.J2Yia2DhmK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2022-07-06 13:37:33 +02:00
commit 73a4ccf938
37 changed files with 859 additions and 51 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Documentation/devicetree/bindings/arm/rockchip.yaml
View File

@ -554,6 +554,11 @@ properties:
- const: vamrs,rk3399pro-vmarc-som
- const: rockchip,rk3399pro
- description: Radxa ROCK Pi S
items:
- const: radxa,rockpis
- const: rockchip,rk3308
- description: Radxa Rock2 Square
items:
- const: radxa,rock2-square

1
arch/arm64/boot/dts/rockchip/Makefile
View File

@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb

2
arch/arm64/boot/dts/rockchip/px30.dtsi
View File

@ -528,7 +528,7 @@
i2c0: i2c@ff180000 {
compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xff180000 0x0 0x1000>;
clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";

2
arch/arm64/boot/dts/rockchip/rk3308-evb.dts
View File

@ -75,7 +75,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
power {
key-power {
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";

253
arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts Normal file
View File

@ -0,0 +1,253 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Akash Gajjar <akash@openedev.com>
* Copyright (c) 2019 Jagan Teki <jagan@openedev.com>
*/
/dts-v1/;
#include "rk3308.dtsi"
/ {
model = "Radxa ROCK Pi S";
compatible = "radxa,rockpis", "rockchip,rk3308";
aliases {
ethernet0 = &gmac;
mmc0 = &emmc;
mmc1 = &sdmmc;
};
chosen {
stdout-path = "serial0:1500000n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
green-led {
default-state = "on";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
label = "rockpis:green:power";
linux,default-trigger = "default-on";
};
blue-led {
default-state = "on";
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "rockpis:blue:user";
linux,default-trigger = "heartbeat";
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-0 = <&wifi_enable_h>;
pinctrl-names = "default";
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
};
vcc_1v8: vcc-1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_io>;
};
vcc_io: vcc-io {
compatible = "regulator-fixed";
regulator-name = "vcc_io";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
vcc_ddr: vcc-ddr {
compatible = "regulator-fixed";
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_otg: vcc5v0-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc5v0_otg";
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vdd_core: vdd-core {
compatible = "pwm-regulator";
pwms = <&pwm0 0 5000 1>;
pwm-supply = <&vcc5v0_sys>;
regulator-name = "vdd_core";
regulator-min-microvolt = <827000>;
regulator-max-microvolt = <1340000>;
regulator-init-microvolt = <1015000>;
regulator-settling-time-up-us = <250>;
regulator-always-on;
regulator-boot-on;
};
vdd_log: vdd-log {
compatible = "regulator-fixed";
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
vin-supply = <&vcc5v0_sys>;
};
};
&cpu0 {
cpu-supply = <&vdd_core>;
};
&emmc {
bus-width = <4>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;
vmmc-supply = <&vcc_io>;
status = "okay";
};
&gmac {
clock_in_out = "output";
phy-supply = <&vcc_io>;
snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 50000 50000>;
status = "okay";
};
&i2c1 {
status = "okay";
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&rtc_32k>;
leds {
green_led_gio: green-led-gpio {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
heartbeat_led_gpio: heartbeat-led-gpio {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_host_wake: wifi-host-wake {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&pwm0 {
status = "okay";
pinctrl-0 = <&pwm0_pin_pull_down>;
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdio {
#address-cells = <1>;
#size-cells = <0>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
max-frequency = <1000000>;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
sd-uhs-sdr104;
status = "okay";
};
&sdmmc {
cap-sd-highspeed;
status = "okay";
};
&u2phy {
status = "okay";
u2phy_host: host-port {
phy-supply = <&vcc5v0_otg>;
status = "okay";
};
u2phy_otg: otg-port {
phy-supply = <&vcc5v0_otg>;
status = "okay";
};
};
&uart0 {
status = "okay";
};
&uart4 {
status = "okay";
bluetooth {
compatible = "realtek,rtl8723bs-bt";
device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
};
};
&usb_host_ehci {
status = "okay";
};
&usb_host_ohci {
status = "okay";
};
&usb20_otg {
dr_mode = "peripheral";
status = "okay";
};
&wdt {
status = "okay";
};

32
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
View File

@ -71,82 +71,82 @@
* |------------------------------------------------|
*/
sw1 {
button-sw1 {
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
sw2 {
button-sw2 {
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
sw3 {
button-sw3 {
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
sw4 {
button-sw4 {
gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
sw5 {
button-sw5 {
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
label = "BTN-A";
linux,code = <BTN_EAST>;
};
sw6 {
button-sw6 {
gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
label = "BTN-B";
linux,code = <BTN_SOUTH>;
};
sw7 {
button-sw7 {
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
label = "BTN-Y";
linux,code = <BTN_WEST>;
};
sw8 {
button-sw8 {
gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
label = "BTN-X";
linux,code = <BTN_NORTH>;
};
sw9 {
button-sw9 {
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
label = "F1";
linux,code = <BTN_TRIGGER_HAPPY1>;
};
sw10 {
button-sw10 {
gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
label = "F2";
linux,code = <BTN_TRIGGER_HAPPY2>;
};
sw11 {
button-sw11 {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
label = "F3";
linux,code = <BTN_TRIGGER_HAPPY3>;
};
sw12 {
button-sw12 {
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
label = "F4";
linux,code = <BTN_TRIGGER_HAPPY4>;
};
sw13 {
button-sw13 {
gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
label = "F5";
linux,code = <BTN_TRIGGER_HAPPY5>;
};
sw14 {
button-sw14 {
gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
label = "F6";
linux,code = <BTN_TRIGGER_HAPPY6>;
};
sw15 {
button-sw15 {
gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
label = "TOP-LEFT";
linux,code = <BTN_TL>;
};
sw16 {
button-sw16 {
gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
label = "TOP-RIGHT";
linux,code = <BTN_TR>;

2
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
View File

@ -34,7 +34,7 @@
pinctrl-0 = <&reset_button_pin>;
pinctrl-names = "default";
reset {
key-reset {
label = "reset";
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;

2
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
View File

@ -76,7 +76,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
power {
key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";

2
arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
View File

@ -43,7 +43,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
power {
key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;

4
arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
View File

@ -44,7 +44,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
power {
key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "GPIO Power";
@ -134,7 +134,7 @@
vccio_sd: vcc-io-sd-regulator {
compatible = "regulator-fixed";
regulator-name= "vccio_sd";
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;

2
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
View File

@ -30,7 +30,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
power {
key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;

2
arch/arm64/boot/dts/rockchip/rk3368-r88.dts
View File

@ -37,7 +37,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
power {
key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";

6
arch/arm64/boot/dts/rockchip/rk3368.dtsi
View File

@ -1084,7 +1084,7 @@
gmac {
rgmii_pins: rgmii-pins {
rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
<3 RK_PD0 1 &pcfg_pull_none>,
<3 RK_PC3 1 &pcfg_pull_none>,
<3 RK_PB0 1 &pcfg_pull_none_12ma>,
@ -1102,7 +1102,7 @@
};
rmii_pins: rmii-pins {
rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
<3 RK_PD0 1 &pcfg_pull_none>,
<3 RK_PC3 1 &pcfg_pull_none>,
<3 RK_PB0 1 &pcfg_pull_none_12ma>,
@ -1257,7 +1257,7 @@
spdif {
spdif_tx: spdif-tx {
rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
};
};

2
arch/arm64/boot/dts/rockchip/rk3399-evb.dts
View File

@ -55,7 +55,7 @@
};
edp_panel: edp-panel {
compatible ="lg,lp079qx1-sp0v";
compatible = "lg,lp079qx1-sp0v";
backlight = <&backlight>;
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
power-supply = <&vcc3v3_s0>;

2
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
View File

@ -87,7 +87,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
power {
key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";

2
arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
View File

@ -206,7 +206,7 @@
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>;
wake_on_bt: wake-on-bt {
wake_on_bt: key-wake-on-bt {
label = "Wake-on-Bluetooth";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;

2
arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
View File

@ -92,7 +92,7 @@
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
pen-insert {
switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;

2
arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
View File

@ -183,7 +183,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pen_eject_odl>;
pen-insert {
switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;

2
arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
View File

@ -136,7 +136,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
power {
key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";

4
arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
View File

@ -46,9 +46,9 @@
gpio-keys {
pinctrl-0 = <&reset_button_pin>;
/delete-node/ power;
/delete-node/ key-power;
reset {
key-reset {
debounce-interval = <50>;
gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
label = "reset";

2
arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
View File

@ -111,7 +111,7 @@
pinctrl-names = "default";
pinctrl-0 = <&power_key>;
power {
key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";

2
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
View File

@ -78,7 +78,7 @@
compatible = "gpio-keys";
autorepeat;
power {
key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";

4
arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
View File

@ -76,7 +76,7 @@
pinctrl-names = "default";
pinctrl-0 = <&lidbtn_pin>;
lid {
switch-lid {
debounce-interval = <20>;
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
label = "Lid";
@ -92,7 +92,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn_pin>;
power {
key-power {
debounce-interval = <20>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "Power";

2
arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
View File

@ -49,7 +49,7 @@
sgtl5000_clk: sgtl5000-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
clock-frequency = <24576000>;
};
dc_12v: dc-12v {

2
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
View File

@ -54,7 +54,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
power {
key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";

72
arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
View File

@ -20,6 +20,15 @@
stdout-path = "serial2:1500000n8";
};
/* enable for panel backlight support */
backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <5>;
pwms = <&pwm0 0 1000000 0>;
status = "disabled";
};
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
@ -33,7 +42,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
power {
key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
@ -107,6 +116,14 @@
};
};
avdd: avdd-regulator {
compatible = "regulator-fixed";
regulator-name = "avdd";
regulator-min-microvolt = <11000000>;
regulator-max-microvolt = <11000000>;
vin-supply = <&vcc3v3_s0>;
};
vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@ -400,8 +417,6 @@
vcc3v0_touch: LDO_REG2 {
regulator-name = "vcc3v0_touch";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
@ -490,8 +505,6 @@
vcc3v3_s0: SWITCH_REG2 {
regulator-name = "vcc3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
@ -565,6 +578,19 @@
vbus-supply = <&vcc5v0_typec>;
status = "okay";
};
/* enable for pine64 touch screen support */
touch: touchscreen@5d {
compatible = "goodix,gt911";
reg = <0x5d>;
interrupt-parent = <&gpio4>;
interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
AVDD28-supply = <&vcc3v0_touch>;
VDDIO-supply = <&vcc3v0_touch>;
irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
};
&i2s0 {
@ -600,6 +626,42 @@
gpio1830-supply = <&vcc_3v0>;
};
/* enable for pine64 panel display support */
&mipi_dsi {
clock-master;
status = "disabled";
ports {
mipi_out: port@1 {
reg = <1>;
mipi_out_panel: endpoint {
remote-endpoint = <&mipi_in_panel>;
};
};
};
mipi_panel: panel@0 {
compatible = "feiyang,fy07024di26a30d";
reg = <0>;
avdd-supply = <&avdd>;
backlight = <&backlight>;
dvdd-supply = <&vcc3v3_s0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
};
};
};
&pcie0 {
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;

2
arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
View File

@ -88,7 +88,7 @@
};
edp_panel: edp-panel {
compatible ="lg,lp079qx1-sp0v";
compatible = "lg,lp079qx1-sp0v";
backlight = <&backlight>;
enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";

2
arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
View File

@ -53,7 +53,7 @@
compatible = "gpio-keys";
autorepeat;
power {
key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";

2
arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
View File

@ -347,7 +347,7 @@
pcie {
pcie_pwr: pcie-pwr {
rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};

2
arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
View File

@ -49,7 +49,7 @@
pinctrl-0 = <&hall_int_l>;
pinctrl-names = "default";
cover {
switch-cover {
label = "cover";
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;

114
arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
View File

@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3566.dtsi"
/ {
@ -32,9 +33,22 @@
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
4500 1>;
pinctrl-names = "default";
pinctrl-0 = <&fan_en_h>;
#cooling-cells = <2>;
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
@ -125,6 +139,18 @@
vin-supply = <&vcc12v_dcin>;
};
vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_enable_h>;
regulator-name = "vcc3v3_pcie_p";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3>;
};
vcc5v0_usb: vcc5v0_usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
@ -201,6 +227,10 @@
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
@ -262,6 +292,28 @@
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda_0v9>;
avdd-1v8-supply = <&vcc_1v8>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
@ -492,6 +544,10 @@
status = "okay";
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_sclktx
@ -509,6 +565,14 @@
};
};
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_h>;
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie_p>;
status = "okay";
};
&pinctrl {
bt {
bt_enable_h: bt-enable-h {
@ -524,6 +588,12 @@
};
};
fan {
fan_en_h: fan-en-h {
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
work_led_enable_h: work-led-enable-h {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
@ -534,6 +604,16 @@
};
};
pcie {
pcie_enable_h: pcie-enable-h {
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie_reset_h: pcie-reset-h {
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
@ -588,6 +668,7 @@
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
@ -608,6 +689,22 @@
status = "okay";
};
&sfc {
pinctrl-0 = <&fspi_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
};
};
/* spdif is exposed on con40 pin 18 */
&spdif {
status = "okay";
@ -722,3 +819,20 @@
phy-supply = <&vcc5v0_usb20_host>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};

4
arch/arm64/boot/dts/rockchip/rk3566.dtsi
View File

@ -29,3 +29,7 @@
extcon = <&usb2phy0>;
maximum-speed = "high-speed";
};
&vop {
compatible = "rockchip,rk3566-vop";
};

89
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
View File

@ -8,6 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
@ -54,6 +55,17 @@
regulator-max-microvolt = <12000000>;
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
@ -174,6 +186,33 @@
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
@ -215,6 +254,7 @@
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
@ -264,6 +304,7 @@
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
@ -359,6 +400,7 @@
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -389,11 +431,33 @@
};
};
&i2c3 {
status = "okay";
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "rtcic_32kout";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
&i2c5 {
/* pin 3 (SDA) + 4 (SCL) of header con2 */
status = "disabled";
};
&i2s0_8ch {
/* hdmi sound */
status = "okay";
};
&mdio1 {
rgmii_phy1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
@ -411,6 +475,12 @@
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic_int {
rockchip,pins =
@ -523,6 +593,8 @@
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
@ -587,3 +659,20 @@
phy-supply = <&vcc5v0_usb_otg>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};

55
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
View File

@ -8,6 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
@ -34,6 +35,17 @@
regulator-max-microvolt = <12000000>;
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
@ -209,6 +221,28 @@
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
@ -466,6 +500,10 @@
};
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
rockchip,trcm-sync-tx-only;
status = "okay";
@ -635,3 +673,20 @@
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};

55
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
View File

@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
@ -20,6 +21,17 @@
stdout-path = "serial2:1500000n8";
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
@ -166,6 +178,28 @@
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
@ -406,6 +440,10 @@
};
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
rockchip,trcm-sync-tx-only;
status = "okay";
@ -560,3 +598,20 @@
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};

4
arch/arm64/boot/dts/rockchip/rk3568.dtsi
View File

@ -137,3 +137,7 @@
phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
phy-names = "usb2-phy", "usb3-phy";
};
&vop {
compatible = "rockchip,rk3568-vop";
};

166
arch/arm64/boot/dts/rockchip/rk356x.dtsi
View File

@ -129,6 +129,11 @@
};
};
display_subsystem: display-subsystem {
compatible = "rockchip,display-subsystem";
ports = <&vop_out>;
};
firmware {
scmi: scmi {
compatible = "arm,scmi-smc";
@ -178,6 +183,22 @@
};
};
hdmi_sound: hdmi-sound {
compatible = "simple-audio-card";
simple-audio-card,name = "HDMI";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
status = "disabled";
simple-audio-card,codec {
sound-dai = <&hdmi>;
};
simple-audio-card,cpu {
sound-dai = <&i2s0_8ch>;
};
};
pmu {
compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
@ -632,6 +653,84 @@
};
};
vop: vop@fe040000 {
reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
reg-names = "vop", "gamma-lut";
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>,
<&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
iommus = <&vop_mmu>;
power-domains = <&power RK3568_PD_VO>;
rockchip,grf = <&grf>;
status = "disabled";
vop_out: ports {
#address-cells = <1>;
#size-cells = <0>;
vp0: port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
};
vp1: port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
vp2: port@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
vop_mmu: iommu@fe043e00 {
compatible = "rockchip,rk3568-iommu";
reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
status = "disabled";
};
hdmi: hdmi@fe0a0000 {
compatible = "rockchip,rk3568-dw-hdmi";
reg = <0x0 0xfe0a0000 0x0 0x20000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_HOST>,
<&cru CLK_HDMI_SFR>,
<&cru CLK_HDMI_CEC>,
<&pmucru CLK_HDMI_REF>,
<&cru HCLK_VO>;
clock-names = "iahb", "isfr", "cec", "ref";
pinctrl-names = "default";
pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
power-domains = <&power RK3568_PD_VO>;
reg-io-width = <4>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
reg = <0>;
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
qos_gpu: qos@fe128000 {
compatible = "rockchip,rk3568-qos", "syscon";
reg = <0x0 0xfe128000 0x0 0x20>;
@ -752,6 +851,56 @@
reg = <0x0 0xfe1a8100 0x0 0x20>;
};
pcie2x1: pcie@fe260000 {
compatible = "rockchip,rk3568-pcie";
reg = <0x3 0xc0000000 0x0 0x00400000>,
<0x0 0xfe260000 0x0 0x00010000>,
<0x3 0x3f000000 0x0 0x01000000>;
reg-names = "dbi", "apb", "config";
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sys", "pmc", "msi", "legacy", "err";
bus-range = <0x0 0xf>;
clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
<&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
<&cru CLK_PCIE20_AUX_NDFT>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk", "aux";
device_type = "pci";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>,
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
linux,pci-domain = <0>;
num-ib-windows = <6>;
num-ob-windows = <2>;
max-link-speed = <2>;
msi-map = <0x0 &gic 0x0 0x1000>;
num-lanes = <1>;
phys = <&combphy2 PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3568_PD_PIPE>;
ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000
0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>;
resets = <&cru SRST_PCIE20_POWERUP>;
reset-names = "pipe";
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie_intc: legacy-interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
};
};
sdmmc0: mmc@fe2b0000 {
compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe2b0000 0x0 0x4000>;
@ -818,6 +967,23 @@
status = "disabled";
};
i2s0_8ch: i2s@fe400000 {
compatible = "rockchip,rk3568-i2s-tdm";
reg = <0x0 0xfe400000 0x0 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
assigned-clock-rates = <1188000000>, <1188000000>;
clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
clock-names = "mclk_tx", "mclk_rx", "hclk";
dmas = <&dmac1 0>;
dma-names = "tx";
resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
reset-names = "tx-m", "rx-m";
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
status = "disabled";
};
i2s1_8ch: i2s@fe410000 {
compatible = "rockchip,rk3568-i2s-tdm";
reg = <0x0 0xfe410000 0x0 0x1000>;