iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[PATCH] zd1211rw: cleanups

Browse Source 
Bit-field constants in zd_chip.h are now defined using a shift expression.
The value 0x08 is now (1 << 3). The fix is intended to improve readability.

Remove misleading comment in zd_mac.c: The function already returns -EPERM
in managed mode (IW_MODE_INFRA).

Remove unused code in zd_mac.c: The unused code intended for debugging
rx_status values is no longer useful.

Added dump_stack() to ZD_ASSERT macro: Output of the stack helps to debug
assertions. Keep in mind that the ZD_ASSERT() macro only results in code,
if DEBUG is defined.

Improved comments for filter_rx()

zd_usb.c: Added driver name to module init and exit functions

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Ulrich Kunitz 2006-11-22 00:05:53 +00:00 committed by Jeff Garzik
parent 84bc715c46
commit 741fec53f2
4 changed files with 53 additions and 110 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

80
drivers/net/wireless/zd1211rw/zd_chip.h
View File

@ -337,24 +337,24 @@
#define CR_MAC_PS_STATE CTL_REG(0x050C)
#define CR_INTERRUPT CTL_REG(0x0510)
#define INT_TX_COMPLETE 0x00000001
#define INT_RX_COMPLETE 0x00000002
#define INT_RETRY_FAIL 0x00000004
#define INT_WAKEUP 0x00000008
#define INT_DTIM_NOTIFY 0x00000020
#define INT_CFG_NEXT_BCN 0x00000040
#define INT_BUS_ABORT 0x00000080
#define INT_TX_FIFO_READY 0x00000100
#define INT_UART 0x00000200
#define INT_TX_COMPLETE_EN 0x00010000
#define INT_RX_COMPLETE_EN 0x00020000
#define INT_RETRY_FAIL_EN 0x00040000
#define INT_WAKEUP_EN 0x00080000
#define INT_DTIM_NOTIFY_EN 0x00200000
#define INT_CFG_NEXT_BCN_EN 0x00400000
#define INT_BUS_ABORT_EN 0x00800000
#define INT_TX_FIFO_READY_EN 0x01000000
#define INT_UART_EN 0x02000000
#define INT_TX_COMPLETE (1 << 0)
#define INT_RX_COMPLETE (1 << 1)
#define INT_RETRY_FAIL (1 << 2)
#define INT_WAKEUP (1 << 3)
#define INT_DTIM_NOTIFY (1 << 5)
#define INT_CFG_NEXT_BCN (1 << 6)
#define INT_BUS_ABORT (1 << 7)
#define INT_TX_FIFO_READY (1 << 8)
#define INT_UART (1 << 9)
#define INT_TX_COMPLETE_EN (1 << 16)
#define INT_RX_COMPLETE_EN (1 << 17)
#define INT_RETRY_FAIL_EN (1 << 18)
#define INT_WAKEUP_EN (1 << 19)
#define INT_DTIM_NOTIFY_EN (1 << 21)
#define INT_CFG_NEXT_BCN_EN (1 << 22)
#define INT_BUS_ABORT_EN (1 << 23)
#define INT_TX_FIFO_READY_EN (1 << 24)
#define INT_UART_EN (1 << 25)
#define CR_TSF_LOW_PART CTL_REG(0x0514)
#define CR_TSF_HIGH_PART CTL_REG(0x0518)
@ -398,18 +398,18 @@
* device will use a rate in this table that is less than or equal to the rate
* of the incoming frame which prompted the response */
#define CR_BASIC_RATE_TBL CTL_REG(0x0630)
#define CR_RATE_1M 0x0001 /* 802.11b */
#define CR_RATE_2M 0x0002 /* 802.11b */
#define CR_RATE_5_5M 0x0004 /* 802.11b */
#define CR_RATE_11M 0x0008 /* 802.11b */
#define CR_RATE_6M 0x0100 /* 802.11g */
#define CR_RATE_9M 0x0200 /* 802.11g */
#define CR_RATE_12M 0x0400 /* 802.11g */
#define CR_RATE_18M 0x0800 /* 802.11g */
#define CR_RATE_24M 0x1000 /* 802.11g */
#define CR_RATE_36M 0x2000 /* 802.11g */
#define CR_RATE_48M 0x4000 /* 802.11g */
#define CR_RATE_54M 0x8000 /* 802.11g */
#define CR_RATE_1M (1 << 0) /* 802.11b */
#define CR_RATE_2M (1 << 1) /* 802.11b */
#define CR_RATE_5_5M (1 << 2) /* 802.11b */
#define CR_RATE_11M (1 << 3) /* 802.11b */
#define CR_RATE_6M (1 << 8) /* 802.11g */
#define CR_RATE_9M (1 << 9) /* 802.11g */
#define CR_RATE_12M (1 << 10) /* 802.11g */
#define CR_RATE_18M (1 << 11) /* 802.11g */
#define CR_RATE_24M (1 << 12) /* 802.11g */
#define CR_RATE_36M (1 << 13) /* 802.11g */
#define CR_RATE_48M (1 << 14) /* 802.11g */
#define CR_RATE_54M (1 << 15) /* 802.11g */
#define CR_RATES_80211G 0xff00
#define CR_RATES_80211B 0x000f
@ -426,9 +426,9 @@
/* register for controlling the LEDS */
#define CR_LED CTL_REG(0x0644)
/* masks for controlling LEDs */
#define LED1 0x0100
#define LED2 0x0200
#define LED_SW 0x0400
#define LED1 (1 << 8)
#define LED2 (1 << 9)
#define LED_SW (1 << 10)
/* Seems to indicate that the configuration is over.
*/
@ -455,18 +455,18 @@
* registers, so one could argue it is a LOCK bit. But calling it
* LOCK_PHY_REGS makes it confusing.
*/
#define UNLOCK_PHY_REGS 0x0080
#define UNLOCK_PHY_REGS (1 << 7)
#define CR_DEVICE_STATE CTL_REG(0x0684)
#define CR_UNDERRUN_CNT CTL_REG(0x0688)
#define CR_RX_FILTER CTL_REG(0x068c)
#define RX_FILTER_ASSOC_RESPONSE 0x0002
#define RX_FILTER_REASSOC_RESPONSE 0x0008
#define RX_FILTER_PROBE_RESPONSE 0x0020
#define RX_FILTER_BEACON 0x0100
#define RX_FILTER_DISASSOC 0x0400
#define RX_FILTER_AUTH 0x0800
#define RX_FILTER_ASSOC_RESPONSE (1 << 1)
#define RX_FILTER_REASSOC_RESPONSE (1 << 3)
#define RX_FILTER_PROBE_RESPONSE (1 << 5)
#define RX_FILTER_BEACON (1 << 8)
#define RX_FILTER_DISASSOC (1 << 10)
#define RX_FILTER_AUTH (1 << 11)
#define AP_RX_FILTER 0x0400feff
#define STA_RX_FILTER 0x0000ffff

1
drivers/net/wireless/zd1211rw/zd_def.h
View File

@ -39,6 +39,7 @@ do { \
if (!(x)) { \
pr_debug("%s:%d ASSERT %s VIOLATED!\n", \
__FILE__, __LINE__, __stringify(x)); \
dump_stack(); \
} \
} while (0)
#else

71
drivers/net/wireless/zd1211rw/zd_mac.c
View File

@ -295,7 +295,6 @@ static void set_channel(struct net_device *netdev, u8 channel)
zd_chip_set_channel(&mac->chip, channel);
}
/* TODO: Should not work in Managed mode. */
int zd_mac_request_channel(struct zd_mac *mac, u8 channel)
{
unsigned long lock_flags;
@ -773,9 +772,11 @@ static int is_data_packet_for_us(struct ieee80211_device *ieee,
(netdev->flags & IFF_PROMISC);
}
/* Filters receiving packets. If it returns 1 send it to ieee80211_rx, if 0
* return. If an error is detected -EINVAL is returned. ieee80211_rx_mgt() is
* called here.
/* Filters received packets. The function returns 1 if the packet should be
* forwarded to ieee80211_rx(). If the packet should be ignored the function
* returns 0. If an invalid packet is found the function returns -EINVAL.
*
* The function calls ieee80211_rx_mgt() directly.
*
* It has been based on ieee80211_rx_any.
*/
@ -801,9 +802,9 @@ static int filter_rx(struct ieee80211_device *ieee,
ieee80211_rx_mgt(ieee, hdr, stats);
return 0;
case IEEE80211_FTYPE_CTL:
/* Ignore invalid short buffers */
return 0;
case IEEE80211_FTYPE_DATA:
/* Ignore invalid short buffers */
if (length < sizeof(struct ieee80211_hdr_3addr))
return -EINVAL;
return is_data_packet_for_us(ieee, hdr);
@ -1019,66 +1020,6 @@ struct iw_statistics *zd_mac_get_wireless_stats(struct net_device *ndev)
return iw_stats;
}
#ifdef DEBUG
static const char* decryption_types[] = {
[ZD_RX_NO_WEP] = "none",
[ZD_RX_WEP64] = "WEP64",
[ZD_RX_TKIP] = "TKIP",
[ZD_RX_AES] = "AES",
[ZD_RX_WEP128] = "WEP128",
[ZD_RX_WEP256] = "WEP256",
};
static const char *decryption_type_string(u8 type)
{
const char *s;
if (type < ARRAY_SIZE(decryption_types)) {
s = decryption_types[type];
} else {
s = NULL;
}
return s ? s : "unknown";
}
static int is_ofdm(u8 frame_status)
{
return (frame_status & ZD_RX_OFDM);
}
void zd_dump_rx_status(const struct rx_status *status)
{
const char* modulation;
u8 quality;
if (is_ofdm(status->frame_status)) {
modulation = "ofdm";
quality = status->signal_quality_ofdm;
} else {
modulation = "cck";
quality = status->signal_quality_cck;
}
pr_debug("rx status %s strength %#04x qual %#04x decryption %s\n",
modulation, status->signal_strength, quality,
decryption_type_string(status->decryption_type));
if (status->frame_status & ZD_RX_ERROR) {
pr_debug("rx error %s%s%s%s%s%s\n",
(status->frame_status & ZD_RX_TIMEOUT_ERROR) ?
"timeout " : "",
(status->frame_status & ZD_RX_FIFO_OVERRUN_ERROR) ?
"fifo " : "",
(status->frame_status & ZD_RX_DECRYPTION_ERROR) ?
"decryption " : "",
(status->frame_status & ZD_RX_CRC32_ERROR) ?
"crc32 " : "",
(status->frame_status & ZD_RX_NO_ADDR1_MATCH_ERROR) ?
"addr1 " : "",
(status->frame_status & ZD_RX_CRC16_ERROR) ?
"crc16" : "");
}
}
#endif /* DEBUG */
#define LINK_LED_WORK_DELAY HZ
static void link_led_handler(void *p)

11
drivers/net/wireless/zd1211rw/zd_usb.c
View File

@ -1116,27 +1116,28 @@ static int __init usb_init(void)
{
int r;
pr_debug("usb_init()\n");
pr_debug("%s usb_init()\n", driver.name);
zd_workqueue = create_singlethread_workqueue(driver.name);
if (zd_workqueue == NULL) {
printk(KERN_ERR "%s: couldn't create workqueue\n", driver.name);
printk(KERN_ERR "%s couldn't create workqueue\n", driver.name);
return -ENOMEM;
}
r = usb_register(&driver);
if (r) {
printk(KERN_ERR "usb_register() failed. Error number %d\n", r);
printk(KERN_ERR "%s usb_register() failed. Error number %d\n",
driver.name, r);
return r;
}
pr_debug("zd1211rw initialized\n");
pr_debug("%s initialized\n", driver.name);
return 0;
}
static void __exit usb_exit(void)
{
pr_debug("usb_exit()\n");
pr_debug("%s usb_exit()\n", driver.name);
usb_deregister(&driver);
destroy_workqueue(zd_workqueue);
}