diff --git a/drivers/net/ipa/ipa_modem.c b/drivers/net/ipa/ipa_modem.c index 423422a2a445..1d1be92fbebc 100644 --- a/drivers/net/ipa/ipa_modem.c +++ b/drivers/net/ipa/ipa_modem.c @@ -39,10 +39,14 @@ enum ipa_modem_state { /** * struct ipa_priv - IPA network device private data * @ipa: IPA pointer + * @tx: Transmit endpoint pointer + * @rx: Receive endpoint pointer * @work: Work structure used to wake the modem netdev TX queue */ struct ipa_priv { struct ipa *ipa; + struct ipa_endpoint *tx; + struct ipa_endpoint *rx; struct work_struct work; }; @@ -59,11 +63,11 @@ static int ipa_open(struct net_device *netdev) if (ret < 0) goto err_power_put; - ret = ipa_endpoint_enable_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]); + ret = ipa_endpoint_enable_one(priv->tx); if (ret) goto err_power_put; - ret = ipa_endpoint_enable_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]); + ret = ipa_endpoint_enable_one(priv->rx); if (ret) goto err_disable_tx; @@ -75,7 +79,7 @@ static int ipa_open(struct net_device *netdev) return 0; err_disable_tx: - ipa_endpoint_disable_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]); + ipa_endpoint_disable_one(priv->tx); err_power_put: pm_runtime_put_noidle(dev); @@ -97,8 +101,8 @@ static int ipa_stop(struct net_device *netdev) netif_stop_queue(netdev); - ipa_endpoint_disable_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]); - ipa_endpoint_disable_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]); + ipa_endpoint_disable_one(priv->rx); + ipa_endpoint_disable_one(priv->tx); out_power_put: pm_runtime_mark_last_busy(dev); (void)pm_runtime_put_autosuspend(dev); @@ -106,13 +110,16 @@ out_power_put: return 0; } -/** ipa_start_xmit() - Transmits an skb. - * @skb: skb to be transmitted - * @dev: network device +/** ipa_start_xmit() - Transmit an skb + * @skb: Socket buffer to be transmitted + * @netdev: Network device * - * Return codes: - * NETDEV_TX_OK: Success - * NETDEV_TX_BUSY: Error while transmitting the skb. Try again later + * Return: NETDEV_TX_OK if successful (or dropped), NETDEV_TX_BUSY otherwise + + * Normally NETDEV_TX_OK indicates the buffer was successfully transmitted. + * If the buffer has an unexpected protocol or its size is out of range it + * is quietly dropped, returning NETDEV_TX_OK. NETDEV_TX_BUSY indicates + * the buffer cannot be sent at this time and should retried later. */ static netdev_tx_t ipa_start_xmit(struct sk_buff *skb, struct net_device *netdev) @@ -132,29 +139,41 @@ ipa_start_xmit(struct sk_buff *skb, struct net_device *netdev) if (endpoint->config.qmap && skb->protocol != htons(ETH_P_MAP)) goto err_drop_skb; - /* The hardware must be powered for us to transmit */ + /* The hardware must be powered for us to transmit, so if we're not + * ready we want the network stack to stop queueing until power is + * ACTIVE. Once runtime resume has completed, we inform the network + * stack it's OK to try transmitting again. + * + * We learn from pm_runtime_get() whether the hardware is powered. + * If it was not, powering up is either started or already underway. + * And in that case we want to disable queueing, expecting it to be + * re-enabled once power is ACTIVE. But runtime PM and network + * transmit run concurrently, and if we're not careful the requests + * to stop and start queueing could occur in the wrong order. + * + * For that reason we *always* stop queueing here, *before* the call + * to pm_runtime_get(). If we determine here that power is ACTIVE, + * we restart queueing before transmitting the SKB. Otherwise + * queueing will eventually be enabled after resume completes. + */ + netif_stop_queue(netdev); + dev = &ipa->pdev->dev; ret = pm_runtime_get(dev); if (ret < 1) { /* If a resume won't happen, just drop the packet */ if (ret < 0 && ret != -EINPROGRESS) { - ipa_power_modem_queue_active(ipa); + netif_wake_queue(netdev); pm_runtime_put_noidle(dev); goto err_drop_skb; } - /* No power (yet). Stop the network stack from transmitting - * until we're resumed; ipa_modem_resume() arranges for the - * TX queue to be started again. - */ - ipa_power_modem_queue_stop(ipa); - pm_runtime_put_noidle(dev); return NETDEV_TX_BUSY; } - ipa_power_modem_queue_active(ipa); + netif_wake_queue(netdev); ret = ipa_endpoint_skb_tx(endpoint, skb); @@ -233,14 +252,14 @@ static void ipa_modem_netdev_setup(struct net_device *netdev) */ void ipa_modem_suspend(struct net_device *netdev) { - struct ipa_priv *priv = netdev_priv(netdev); - struct ipa *ipa = priv->ipa; + struct ipa_priv *priv; if (!(netdev->flags & IFF_UP)) return; - ipa_endpoint_suspend_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]); - ipa_endpoint_suspend_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]); + priv = netdev_priv(netdev); + ipa_endpoint_suspend_one(priv->rx); + ipa_endpoint_suspend_one(priv->tx); } /** @@ -258,7 +277,7 @@ static void ipa_modem_wake_queue_work(struct work_struct *work) { struct ipa_priv *priv = container_of(work, struct ipa_priv, work); - ipa_power_modem_queue_wake(priv->ipa); + netif_wake_queue(priv->tx->netdev); } /** ipa_modem_resume() - resume callback for runtime_pm @@ -268,14 +287,14 @@ static void ipa_modem_wake_queue_work(struct work_struct *work) */ void ipa_modem_resume(struct net_device *netdev) { - struct ipa_priv *priv = netdev_priv(netdev); - struct ipa *ipa = priv->ipa; + struct ipa_priv *priv; if (!(netdev->flags & IFF_UP)) return; - ipa_endpoint_resume_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]); - ipa_endpoint_resume_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]); + priv = netdev_priv(netdev); + ipa_endpoint_resume_one(priv->tx); + ipa_endpoint_resume_one(priv->rx); /* Arrange for the TX queue to be restarted */ (void)queue_pm_work(&priv->work); @@ -306,16 +325,21 @@ int ipa_modem_start(struct ipa *ipa) SET_NETDEV_DEV(netdev, &ipa->pdev->dev); priv = netdev_priv(netdev); priv->ipa = ipa; + priv->tx = ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]; + priv->rx = ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]; INIT_WORK(&priv->work, ipa_modem_wake_queue_work); - ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]->netdev = netdev; - ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]->netdev = netdev; + + priv->tx->netdev = netdev; + priv->rx->netdev = netdev; + ipa->modem_netdev = netdev; ret = register_netdev(netdev); if (ret) { ipa->modem_netdev = NULL; - ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]->netdev = NULL; - ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]->netdev = NULL; + priv->rx->netdev = NULL; + priv->tx->netdev = NULL; + free_netdev(netdev); } @@ -355,9 +379,11 @@ int ipa_modem_stop(struct ipa *ipa) if (netdev->flags & IFF_UP) (void)ipa_stop(netdev); unregister_netdev(netdev); + ipa->modem_netdev = NULL; - ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]->netdev = NULL; - ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]->netdev = NULL; + priv->rx->netdev = NULL; + priv->tx->netdev = NULL; + free_netdev(netdev); } diff --git a/drivers/net/ipa/ipa_power.c b/drivers/net/ipa/ipa_power.c index e223886123ce..128a816f6523 100644 --- a/drivers/net/ipa/ipa_power.c +++ b/drivers/net/ipa/ipa_power.c @@ -38,15 +38,11 @@ * enum ipa_power_flag - IPA power flags * @IPA_POWER_FLAG_RESUMED: Whether resume from suspend has been signaled * @IPA_POWER_FLAG_SYSTEM: Hardware is system (not runtime) suspended - * @IPA_POWER_FLAG_STOPPED: Modem TX is disabled by ipa_start_xmit() - * @IPA_POWER_FLAG_STARTED: Modem TX was enabled by ipa_runtime_resume() * @IPA_POWER_FLAG_COUNT: Number of defined power flags */ enum ipa_power_flag { IPA_POWER_FLAG_RESUMED, IPA_POWER_FLAG_SYSTEM, - IPA_POWER_FLAG_STOPPED, - IPA_POWER_FLAG_STARTED, IPA_POWER_FLAG_COUNT, /* Last; not a flag */ }; @@ -55,7 +51,6 @@ enum ipa_power_flag { * @dev: IPA device pointer * @core: IPA core clock * @qmp: QMP handle for AOSS communication - * @spinlock: Protects modem TX queue enable/disable * @flags: Boolean state flags * @interconnect_count: Number of elements in interconnect[] * @interconnect: Interconnect array @@ -64,7 +59,6 @@ struct ipa_power { struct device *dev; struct clk *core; struct qmp *qmp; - spinlock_t spinlock; /* used with STOPPED/STARTED power flags */ DECLARE_BITMAP(flags, IPA_POWER_FLAG_COUNT); u32 interconnect_count; struct icc_bulk_data interconnect[] __counted_by(interconnect_count); @@ -233,70 +227,6 @@ void ipa_power_suspend_handler(struct ipa *ipa, enum ipa_irq_id irq_id) ipa_interrupt_suspend_clear_all(ipa->interrupt); } -/* The next few functions coordinate stopping and starting the modem - * network device transmit queue. - * - * Transmit can be running concurrent with power resume, and there's a - * chance the resume completes before the transmit path stops the queue, - * leaving the queue in a stopped state. The next two functions are used - * to avoid this: ipa_power_modem_queue_stop() is used by ipa_start_xmit() - * to conditionally stop the TX queue; and ipa_power_modem_queue_start() - * is used by ipa_runtime_resume() to conditionally restart it. - * - * Two flags and a spinlock are used. If the queue is stopped, the STOPPED - * power flag is set. And if the queue is started, the STARTED flag is set. - * The queue is only started on resume if the STOPPED flag is set. And the - * queue is only started in ipa_start_xmit() if the STARTED flag is *not* - * set. As a result, the queue remains operational if the two activites - * happen concurrently regardless of the order they complete. The spinlock - * ensures the flag and TX queue operations are done atomically. - * - * The first function stops the modem netdev transmit queue, but only if - * the STARTED flag is *not* set. That flag is cleared if it was set. - * If the queue is stopped, the STOPPED flag is set. This is called only - * from the power ->runtime_resume operation. - */ -void ipa_power_modem_queue_stop(struct ipa *ipa) -{ - struct ipa_power *power = ipa->power; - unsigned long flags; - - spin_lock_irqsave(&power->spinlock, flags); - - if (!__test_and_clear_bit(IPA_POWER_FLAG_STARTED, power->flags)) { - netif_stop_queue(ipa->modem_netdev); - __set_bit(IPA_POWER_FLAG_STOPPED, power->flags); - } - - spin_unlock_irqrestore(&power->spinlock, flags); -} - -/* This function starts the modem netdev transmit queue, but only if the - * STOPPED flag is set. That flag is cleared if it was set. If the queue - * was restarted, the STARTED flag is set; this allows ipa_start_xmit() - * to skip stopping the queue in the event of a race. - */ -void ipa_power_modem_queue_wake(struct ipa *ipa) -{ - struct ipa_power *power = ipa->power; - unsigned long flags; - - spin_lock_irqsave(&power->spinlock, flags); - - if (__test_and_clear_bit(IPA_POWER_FLAG_STOPPED, power->flags)) { - __set_bit(IPA_POWER_FLAG_STARTED, power->flags); - netif_wake_queue(ipa->modem_netdev); - } - - spin_unlock_irqrestore(&power->spinlock, flags); -} - -/* This function clears the STARTED flag once the TX queue is operating */ -void ipa_power_modem_queue_active(struct ipa *ipa) -{ - clear_bit(IPA_POWER_FLAG_STARTED, ipa->power->flags); -} - static int ipa_power_retention_init(struct ipa_power *power) { struct qmp *qmp = qmp_get(power->dev); @@ -385,7 +315,6 @@ ipa_power_init(struct device *dev, const struct ipa_power_data *data) } power->dev = dev; power->core = clk; - spin_lock_init(&power->spinlock); power->interconnect_count = data->interconnect_count; ret = ipa_interconnect_init(power, data->interconnect_data); diff --git a/drivers/net/ipa/ipa_power.h b/drivers/net/ipa/ipa_power.h index 3a4c59ea1222..718aacf5e2b2 100644 --- a/drivers/net/ipa/ipa_power.h +++ b/drivers/net/ipa/ipa_power.h @@ -23,24 +23,6 @@ extern const struct dev_pm_ops ipa_pm_ops; */ u32 ipa_core_clock_rate(struct ipa *ipa); -/** - * ipa_power_modem_queue_stop() - Possibly stop the modem netdev TX queue - * @ipa: IPA pointer - */ -void ipa_power_modem_queue_stop(struct ipa *ipa); - -/** - * ipa_power_modem_queue_wake() - Possibly wake the modem netdev TX queue - * @ipa: IPA pointer - */ -void ipa_power_modem_queue_wake(struct ipa *ipa); - -/** - * ipa_power_modem_queue_active() - Report modem netdev TX queue active - * @ipa: IPA pointer - */ -void ipa_power_modem_queue_active(struct ipa *ipa); - /** * ipa_power_retention() - Control register retention on power collapse * @ipa: IPA pointer