diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 61e15ef07166..e2600e7ce4ea 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -612,7 +612,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
baud);
if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
- dbg("Baud rate requested not supported by device\n");
+ dbg("Baud rate requested not supported by device");
baud = tty_termios_baud_rate(old_termios);
}
}
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 23c8bd6dedeb..036f9996fe52 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -391,7 +391,7 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (!tty) {
- dbg("%s - ignoring since device not open\n", __func__);
+ dbg("%s - ignoring since device not open", __func__);
return;
}
if (urb->actual_length) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d59262ecc229..1c84355a0c80 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1836,7 +1836,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
spin_lock_irqsave(&priv->tx_lock, flags);
if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->tx_lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
priv->tx_outstanding_urbs++;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 0b1c4732b878..5288203d883f 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -194,7 +194,7 @@ static int usb_serial_multi_urb_write(struct tty_struct *tty,
if (port->urbs_in_flight >
port->serial->type->max_in_flight_urbs) {
spin_unlock_irqrestore(&port->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return bwrite;
}
port->tx_bytes_flight += towrite;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index c055c8ba377d..66fb58f427cd 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1971,7 +1971,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
return;
case IOSP_EXT_STATUS_RX_CHECK_RSP:
- dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3);
+ dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3);
/* Port->RxCheckRsp = true; */
return;
}
@@ -2039,7 +2039,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
break;
default:
- dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
+ dbg("%s - Unrecognized IOSP status code %u", __func__, code);
break;
}
return;
@@ -2494,7 +2494,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
*divisor = custom;
- dbg("%s - Baud %d = %d\n", __func__, baudrate, custom);
+ dbg("%s - Baud %d = %d", __func__, baudrate, custom);
return 0;
}
@@ -2879,7 +2879,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
break;
case EDGE_DOWNLOAD_FILE_NONE:
- dbg ("No download file specified, skipping download\n");
+ dbg("No download file specified, skipping download");
return;
default:
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 8f0aa64940a6..98e50456ad79 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1716,7 +1716,7 @@ static void edge_interrupt_callback(struct urb *urb)
case TIUMP_INTERRUPT_CODE_MSR: /* MSR */
/* Copy MSR from UMP */
msr = data[1];
- dbg("%s - ===== Port %u MSR Status = %02x ======\n",
+ dbg("%s - ===== Port %u MSR Status = %02x ======",
__func__, port_number, msr);
handle_new_msr(edge_port, msr);
break;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e0aa031c5418..546b29f73c2c 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -109,7 +109,7 @@ static void mos7720_interrupt_callback(struct urb *urb)
__u8 sp1;
__u8 sp2;
- dbg("%s", " : Entering\n");
+ dbg(" : Entering");
switch (status) {
case 0:
@@ -278,7 +278,7 @@ static void mos7720_bulk_in_callback(struct urb *urb)
mos7720_port = urb->context;
if (!mos7720_port) {
- dbg("%s", "NULL mos7720_port pointer \n");
+ dbg("NULL mos7720_port pointer");
return ;
}
@@ -386,7 +386,7 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
}
out:
if (status < 0)
- dbg("Command Write failed Value %x index %x\n", value, index);
+ dbg("Command Write failed Value %x index %x", value, index);
return status;
}
@@ -491,7 +491,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
*/
port_number = port->number - port->serial->minor;
send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
- dbg("SS::%p LSR:%x\n", mos7720_port, data);
+ dbg("SS::%p LSR:%x", mos7720_port, data);
dbg("Check:Sending Command ..........");
@@ -830,7 +830,7 @@ static void mos7720_throttle(struct tty_struct *tty)
struct moschip_port *mos7720_port;
int status;
- dbg("%s- port %d\n", __func__, port->number);
+ dbg("%s- port %d", __func__, port->number);
mos7720_port = usb_get_serial_port_data(port);
@@ -1309,7 +1309,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
return;
}
- dbg("%s\n", "setting termios - ASPIRE");
+ dbg("setting termios - ASPIRE");
cflag = tty->termios->c_cflag;
@@ -1327,7 +1327,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
change_port_settings(tty, mos7720_port, old_termios);
if (!port->read_urb) {
- dbg("%s", "URB KILLED !!!!!\n");
+ dbg("URB KILLED !!!!!");
return;
}
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 38762a0fb5bf..7793c4ada038 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -332,7 +332,7 @@ static void omninet_write_bulk_callback(struct urb *urb)
struct usb_serial_port *port = urb->context;
int status = urb->status;
- dbg("%s - port %0x\n", __func__, port->number);
+ dbg("%s - port %0x", __func__, port->number);
port->write_urb_busy = 0;
if (status) {
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index a654317e7d15..773286672ec9 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -217,7 +217,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
priv->outstanding_urbs++;
@@ -288,7 +288,7 @@ static int opticon_write_room(struct tty_struct *tty)
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 51b0beb39280..f6646b30f954 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1028,7 +1028,7 @@ static void option_instat_callback(struct urb *urb)
(struct usb_ctrlrequest *)urb->transfer_buffer;
if (!req_pkt) {
- dbg("%s: NULL req_pkt\n", __func__);
+ dbg("%s: NULL req_pkt", __func__);
return;
}
if ((req_pkt->bRequestType == 0xA1) &&
@@ -1452,7 +1452,7 @@ static int option_resume(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
if (!port->interrupt_in_urb) {
- dbg("%s: No interrupt URB for port %d\n", __func__, i);
+ dbg("%s: No interrupt URB for port %d", __func__, i);
continue;
}
err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index ebd1688e62df..067e95ad2987 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -609,7 +609,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
if (i < 0)
dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
uartdata, i);
- dbg("0x21:0x40:0:0 %d\n", i);
+ dbg("0x21:0x40:0:0 %d", i);
if (cflag & CRTSCTS) {
/* enable hardware flow control */
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 178e4d9abb27..4f7945e672cc 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -368,7 +368,7 @@ static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
priv->outstanding_urbs++;
@@ -446,7 +446,7 @@ static int visor_write_room(struct tty_struct *tty)
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
spin_unlock_irqrestore(&priv->lock, flags);