iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch '7xx-iosplit-plat' with omap-fixes

Browse Source
This commit is contained in:
Tony Lindgren 2009-11-10 18:10:34 -08:00
commit 774facda20
269 changed files with 1702 additions and 1556 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/mach-omap1/board-ams-delta.c
View File

@ -25,13 +25,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board-ams-delta.h>
#include <plat/board-ams-delta.h>
#include <mach/gpio.h>
#include <mach/keypad.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/board.h>
#include <mach/common.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;

32
arch/arm/mach-omap1/board-fsample.c
View File

@ -26,14 +26,14 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/tc.h>
#include <plat/tc.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/fpga.h>
#include <mach/nand.h>
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/board.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/nand.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/board.h>
/* fsample is pretty close to p2-sample */
@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = INT_730_MPU_EXT_NIRQ,
.start = INT_7XX_MPU_EXT_NIRQ,
.end = 0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
@ -196,8 +196,8 @@ static struct platform_device smc91x_device = {
static struct resource kp_resources[] = {
[0] = {
.start = INT_730_MPUIO_KEYPAD,
.end = INT_730_MPUIO_KEYPAD,
.start = INT_7XX_MPUIO_KEYPAD,
.end = INT_7XX_MPUIO_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void)
/*
* Hold GSM Reset until needed
*/
omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
/*
* UARTs -> done automagically by 8250 driver
@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void)
*/
/* Flash: CS0 timings setup */
omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
/*
* Ethernet support through the debug board
* CS1 timings setup
*/
omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
/*
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
}
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")

8
arch/arm/mach-omap1/board-generic.c
View File

@ -23,10 +23,10 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/board.h>
#include <mach/common.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
static void __init omap_generic_init_irq(void)
{

2
arch/arm/mach-omap1/board-h2-mmc.c
View File

@ -16,7 +16,7 @@
#include <linux/i2c/tps65010.h>
#include <mach/mmc.h>
#include <plat/mmc.h>
#include <mach/gpio.h>
#include "board-h2.h"

16
arch/arm/mach-omap1/board-h2.c
View File

@ -37,14 +37,14 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <mach/dma.h>
#include <mach/tc.h>
#include <mach/nand.h>
#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/common.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/nand.h>
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include "board-h2.h"

2
arch/arm/mach-omap1/board-h3-mmc.c
View File

@ -16,7 +16,7 @@
#include <linux/i2c/tps65010.h>
#include <mach/mmc.h>
#include <plat/mmc.h>
#include <mach/gpio.h>
#include "board-h3.h"

14
arch/arm/mach-omap1/board-h3.c
View File

@ -40,13 +40,13 @@
#include <asm/mach/map.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/nand.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/dma.h>
#include <mach/common.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
#include <plat/common.h>
#include "board-h3.h"

14
arch/arm/mach-omap1/board-innovator.c
View File

@ -30,14 +30,14 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <mach/fpga.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <mach/gpio.h>
#include <mach/tc.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/mmc.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/mmc.h>
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300

22
arch/arm/mach-omap1/board-nokia770.c
View File

@ -26,17 +26,17 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/board.h>
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/dsp_common.h>
#include <mach/omapfb.h>
#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
#include <mach/clock.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/dsp_common.h>
#include <plat/omapfb.h>
#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
#include <plat/clock.h>
#define ADS7846_PENDOWN_GPIO 15

10
arch/arm/mach-omap1/board-osk.c
View File

@ -47,10 +47,10 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/usb.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/common.h>
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/common.h>
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
#define OMAP_OSK_ETHR_START 0x04800300
@ -312,7 +312,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/keypad.h>
#include <plat/keypad.h>
static struct at24_platform_data at24c04 = {
.byte_len = SZ_4K / 8,

16
arch/arm/mach-omap1/board-palmte.c
View File

@ -34,14 +34,14 @@
#include <asm/mach/flash.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/tc.h>
#include <mach/dma.h>
#include <mach/board.h>
#include <mach/irda.h>
#include <mach/keypad.h>
#include <mach/common.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/dma.h>
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include <plat/common.h>
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1

18
arch/arm/mach-omap1/board-palmtt.c
View File

@ -29,16 +29,16 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/led.h>
#include <plat/led.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/dma.h>
#include <mach/tc.h>
#include <mach/board.h>
#include <mach/irda.h>
#include <mach/keypad.h>
#include <mach/common.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>

18
arch/arm/mach-omap1/board-palmz71.c
View File

@ -33,15 +33,15 @@
#include <asm/mach/flash.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/dma.h>
#include <mach/tc.h>
#include <mach/board.h>
#include <mach/irda.h>
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/omap-alsa.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/omap-alsa.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>

32
arch/arm/mach-omap1/board-perseus2.c
View File

@ -26,14 +26,14 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/tc.h>
#include <plat/tc.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/fpga.h>
#include <mach/nand.h>
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/board.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/nand.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/board.h>
static int p2_keymap[] = {
KEY(0,0,KEY_UP),
@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = INT_730_MPU_EXT_NIRQ,
.start = INT_7XX_MPU_EXT_NIRQ,
.end = 0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
@ -163,8 +163,8 @@ static struct platform_device smc91x_device = {
static struct resource kp_resources[] = {
[0] = {
.start = INT_730_MPUIO_KEYPAD,
.end = INT_730_MPUIO_KEYPAD,
.start = INT_7XX_MPUIO_KEYPAD,
.end = INT_7XX_MPUIO_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void)
/*
* Hold GSM Reset until needed
*/
omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
/*
* UARTs -> done automagically by 8250 driver
@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void)
*/
/* Flash: CS0 timings setup */
omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
/*
* Ethernet support through the debug board
* CS1 timings setup
*/
omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
/*
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
}
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")

4
arch/arm/mach-omap1/board-sx1-mmc.c
View File

@ -15,9 +15,9 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <plat/mmc.h>
#include <mach/gpio.h>
#include <mach/board-sx1.h>
#include <plat/board-sx1.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)

18
arch/arm/mach-omap1/board-sx1.c
View File

@ -33,15 +33,15 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/dma.h>
#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/tc.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
#include <mach/board-sx1.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/keypad.h>
#include <plat/board-sx1.h>
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)

8
arch/arm/mach-omap1/board-voiceblue.c
View File

@ -29,11 +29,11 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/common.h>
#include <plat/common.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
static struct plat_serial8250_port voiceblue_ports[] = {
{

32
arch/arm/mach-omap1/clock.c
View File

@ -22,10 +22,10 @@
#include <asm/mach-types.h>
#include <asm/clkdev.h>
#include <mach/cpu.h>
#include <mach/usb.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <plat/cpu.h>
#include <plat/usb.h>
#include <plat/clock.h>
#include <plat/sram.h>
static const struct clkops clkops_generic;
static const struct clkops clkops_uart;
@ -69,13 +69,13 @@ struct omap_clk {
}
#define CK_310 (1 << 0)
#define CK_730 (1 << 1)
#define CK_7XX (1 << 1)
#define CK_1510 (1 << 2)
#define CK_16XX (1 << 3)
static struct omap_clk omap_clks[] = {
/* non-ULPD clocks */
CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
/* CK_GEN1 clocks */
CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = {
CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX),
@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = {
CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310),
/* CK_GEN3 clocks */
CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730),
CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310),
CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX),
CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX),
@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = {
CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730),
CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX),
CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310),
/* ULPD clocks */
CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
* Reprogramming the DPLL is tricky, it must be done from SRAM.
* (on 730, bit 13 must always be 1)
*/
if (cpu_is_omap730())
if (cpu_is_omap7xx())
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
else
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
@ -783,8 +783,8 @@ int __init omap1_clk_init(void)
cpu_mask |= CK_16XX;
if (cpu_is_omap1510())
cpu_mask |= CK_1510;
if (cpu_is_omap730())
cpu_mask |= CK_730;
if (cpu_is_omap7xx())
cpu_mask |= CK_7XX;
if (cpu_is_omap310())
cpu_mask |= CK_310;
@ -800,7 +800,7 @@ int __init omap1_clk_init(void)
crystal_type = info->system_clock_type;
}
#if defined(CONFIG_ARCH_OMAP730)
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
ck_ref.rate = 13000000;
#elif defined(CONFIG_ARCH_OMAP16XX)
if (crystal_type == 2)
@ -847,7 +847,7 @@ int __init omap1_clk_init(void)
printk(KERN_ERR "System frequencies not set. Check your config.\n");
/* Guess sane values (60MHz) */
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
}
#endif
@ -862,7 +862,7 @@ int __init omap1_clk_init(void)
#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
#endif
/* Amstrad Delta wants BCLK high when inactive */
@ -873,7 +873,7 @@ int __init omap1_clk_init(void)
/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
/* (on 730, bit 13 must not be cleared) */
if (cpu_is_omap730())
if (cpu_is_omap7xx())
omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
else
omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);

8
arch/arm/mach-omap1/devices.c
View File

@ -18,11 +18,11 @@
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <mach/tc.h>
#include <mach/board.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
#include <mach/gpio.h>
#include <mach/mmc.h>
#include <plat/mmc.h>
/*-------------------------------------------------------------------------*/

2
arch/arm/mach-omap1/fpga.c
View File

@ -27,7 +27,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <mach/fpga.h>
#include <plat/fpga.h>
#include <mach/gpio.h>
static void fpga_mask_irq(unsigned int irq)

2
arch/arm/mach-omap1/id.c
View File

@ -15,7 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <mach/cpu.h>
#include <plat/cpu.h>
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804

5
arch/arm/mach-omap1/include/mach/clkdev.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/clkdev.h
*/
#include <plat/clkdev.h>

45
arch/arm/mach-omap1/include/mach/debug-macro.S Normal file
View File

@ -0,0 +1,45 @@
/* arch/arm/mach-omap1/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xff000000 @ physical base address
movne \rx, #0xfe000000 @ virtual base
orr \rx, \rx, #0x00fb0000
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
orr \rx, \rx, #0x00009000 @ UART 3
#endif
#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
orr \rx, \rx, #0x00000800 @ UART 2 & 3
#endif
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
and \rd, \rd, #0x60
teq \rd, #0x60
beq 1002f
ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1001b
1002:
.endm
.macro waituart,rd,rx
.endm

58
arch/arm/mach-omap1/include/mach/entry-macro.S Normal file
View File

@ -0,0 +1,58 @@
/*
* arch/arm/mach-omap1/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for OMAP-based platforms
*
* Copyright (C) 2009 Texas Instruments
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
#define INT_IH2_IRQ INT_7XX_IH2_IRQ
#elif defined(CONFIG_ARCH_OMAP15XX)
#define INT_IH2_IRQ INT_1510_IH2_IRQ
#elif defined(CONFIG_ARCH_OMAP16XX)
#define INT_IH2_IRQ INT_1610_IH2_IRQ
#else
#warning "IH2 IRQ defaulted"
#define INT_IH2_IRQ INT_1510_IH2_IRQ
#endif
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET]
mov \irqstat, #0xffffffff
bic \tmp, \irqstat, \tmp
tst \irqnr, \tmp
beq 1510f
ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
cmp \irqnr, #0
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
cmpeq \irqnr, #INT_IH2_IRQ
ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
addeqs \irqnr, \irqnr, #32
1510:
.endm

5
arch/arm/mach-omap1/include/mach/gpio.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/gpio.h
*/
#include <plat/gpio.h>

5
arch/arm/mach-omap1/include/mach/hardware.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/hardware.h
*/
#include <plat/hardware.h>

5
arch/arm/mach-omap1/include/mach/io.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/io.h
*/
#include <plat/io.h>

5
arch/arm/mach-omap1/include/mach/irqs.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/irqs.h
*/
#include <plat/irqs.h>

5
arch/arm/mach-omap1/include/mach/memory.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/memory.h
*/
#include <plat/memory.h>

0
arch/arm/plat-omap/include/mach/mtd-xip.h → arch/arm/mach-omap1/include/mach/mtd-xip.h
View File

5
arch/arm/mach-omap1/include/mach/smp.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/smp.h
*/
#include <plat/smp.h>

5
arch/arm/mach-omap1/include/mach/system.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/system.h
*/
#include <plat/system.h>

5
arch/arm/mach-omap1/include/mach/timex.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/timex.h
*/
#include <plat/timex.h>

5
arch/arm/mach-omap1/include/mach/uncompress.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap1/include/mach/uncompress.h
*/
#include <plat/uncompress.h>

20
arch/arm/mach-omap1/include/mach/vmalloc.h Normal file
View File

@ -0,0 +1,20 @@
/*
* arch/arm/mach-omap1/include/mach/vmalloc.h
*
* Copyright (C) 2000 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END (PAGE_OFFSET + 0x18000000)

49
arch/arm/mach-omap1/io.c
View File

@ -15,8 +15,8 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <plat/mux.h>
#include <plat/tc.h>
extern int omap1_clk_init(void);
extern void omap_check_revision(void);
@ -36,33 +36,17 @@ static struct map_desc omap_io_desc[] __initdata = {
}
};
#ifdef CONFIG_ARCH_OMAP730
static struct map_desc omap730_io_desc[] __initdata = {
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
static struct map_desc omap7xx_io_desc[] __initdata = {
{
.virtual = OMAP730_DSP_BASE,
.pfn = __phys_to_pfn(OMAP730_DSP_START),
.length = OMAP730_DSP_SIZE,
.virtual = OMAP7XX_DSP_BASE,
.pfn = __phys_to_pfn(OMAP7XX_DSP_START),
.length = OMAP7XX_DSP_SIZE,
.type = MT_DEVICE
}, {
.virtual = OMAP730_DSPREG_BASE,
.pfn = __phys_to_pfn(OMAP730_DSPREG_START),
.length = OMAP730_DSPREG_SIZE,
.type = MT_DEVICE
}
};
#endif
#ifdef CONFIG_ARCH_OMAP850
static struct map_desc omap850_io_desc[] __initdata = {
{
.virtual = OMAP850_DSP_BASE,
.pfn = __phys_to_pfn(OMAP850_DSP_START),
.length = OMAP850_DSP_SIZE,
.type = MT_DEVICE
}, {
.virtual = OMAP850_DSPREG_BASE,
.pfn = __phys_to_pfn(OMAP850_DSPREG_START),
.length = OMAP850_DSPREG_SIZE,
.virtual = OMAP7XX_DSPREG_BASE,
.pfn = __phys_to_pfn(OMAP7XX_DSPREG_START),
.length = OMAP7XX_DSPREG_SIZE,
.type = MT_DEVICE
}
};
@ -120,18 +104,11 @@ void __init omap1_map_common_io(void)
*/
omap_check_revision();
#ifdef CONFIG_ARCH_OMAP730
if (cpu_is_omap730()) {
iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
if (cpu_is_omap7xx()) {
iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP850
if (cpu_is_omap850()) {
iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));

34
arch/arm/mach-omap1/irq.c
View File

@ -46,7 +46,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <mach/gpio.h>
#include <mach/cpu.h>
#include <plat/cpu.h>
#define IRQ_BANK(irq) ((irq) >> 5)
#define IRQ_BIT(irq) ((irq) & 0x1f)
@ -137,16 +137,8 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
irq_bank_writel(val, bank, offset);
}
#ifdef CONFIG_ARCH_OMAP730
static struct omap_irq_bank omap730_irq_banks[] = {
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
{ .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
};
#endif
#ifdef CONFIG_ARCH_OMAP850
static struct omap_irq_bank omap850_irq_banks[] = {
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
static struct omap_irq_bank omap7xx_irq_banks[] = {
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
{ .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
@ -186,16 +178,10 @@ void __init omap_init_irq(void)
{
int i, j;
#ifdef CONFIG_ARCH_OMAP730
if (cpu_is_omap730()) {
irq_banks = omap730_irq_banks;
irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
}
#endif
#ifdef CONFIG_ARCH_OMAP850
if (cpu_is_omap850()) {
irq_banks = omap850_irq_banks;
irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
if (cpu_is_omap7xx()) {
irq_banks = omap7xx_irq_banks;
irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
}
#endif
#ifdef CONFIG_ARCH_OMAP15XX
@ -247,10 +233,8 @@ void __init omap_init_irq(void)
/* Unmask level 2 handler */
if (cpu_is_omap730())
omap_unmask_irq(INT_730_IH2_IRQ);
else if (cpu_is_omap850())
omap_unmask_irq(INT_850_IH2_IRQ);
if (cpu_is_omap7xx())
omap_unmask_irq(INT_7XX_IH2_IRQ);
else if (cpu_is_omap15xx())
omap_unmask_irq(INT_1510_IH2_IRQ);
else if (cpu_is_omap16xx())

2
arch/arm/mach-omap1/leds-h2p2-debug.c
View File

@ -19,7 +19,7 @@
#include <asm/system.h>
#include <asm/mach-types.h>
#include <mach/fpga.h>
#include <plat/fpga.h>
#include <mach/gpio.h>
#include "leds.h"

2
arch/arm/mach-omap1/leds.c
View File

@ -10,7 +10,7 @@
#include <asm/mach-types.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <plat/mux.h>
#include "leds.h"

2
arch/arm/mach-omap1/mailbox.c
View File

@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/mailbox.h>
#include <plat/mailbox.h>
#include <mach/irqs.h>
#define MAILBOX_ARM2DSP1 0x00

42
arch/arm/mach-omap1/mcbsp.c
View File

@ -18,11 +18,11 @@
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
#include <mach/dsp_common.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/cpu.h>
#include <plat/mcbsp.h>
#include <plat/dsp_common.h>
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
@ -79,29 +79,29 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
.free = omap1_mcbsp_free,
};
#ifdef CONFIG_ARCH_OMAP730
static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
{
.phys_base = OMAP730_MCBSP1_BASE,
.phys_base = OMAP7XX_MCBSP1_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.rx_irq = INT_730_McBSP1RX,
.tx_irq = INT_730_McBSP1TX,
.rx_irq = INT_7XX_McBSP1RX,
.tx_irq = INT_7XX_McBSP1TX,
.ops = &omap1_mcbsp_ops,
},
{
.phys_base = OMAP730_MCBSP2_BASE,
.phys_base = OMAP7XX_MCBSP2_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
.rx_irq = INT_730_McBSP2RX,
.tx_irq = INT_730_McBSP2TX,
.rx_irq = INT_7XX_McBSP2RX,
.tx_irq = INT_7XX_McBSP2TX,
.ops = &omap1_mcbsp_ops,
},
};
#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata)
#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata)
#else
#define omap730_mcbsp_pdata NULL
#define OMAP730_MCBSP_PDATA_SZ 0
#define omap7xx_mcbsp_pdata NULL
#define OMAP7XX_MCBSP_PDATA_SZ 0
#endif
#ifdef CONFIG_ARCH_OMAP15XX
@ -172,8 +172,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
int __init omap1_mcbsp_init(void)
{
if (cpu_is_omap730())
omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
if (cpu_is_omap7xx())
omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
if (cpu_is_omap15xx())
omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
if (cpu_is_omap16xx())
@ -184,9 +184,9 @@ int __init omap1_mcbsp_init(void)
if (!mcbsp_ptr)
return -ENOMEM;
if (cpu_is_omap730())
omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
OMAP730_MCBSP_PDATA_SZ);
if (cpu_is_omap7xx())
omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata,
OMAP7XX_MCBSP_PDATA_SZ);
if (cpu_is_omap15xx())
omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,

70
arch/arm/mach-omap1/mux.c
View File

@ -29,53 +29,34 @@
#include <asm/system.h>
#include <mach/mux.h>
#include <plat/mux.h>
#ifdef CONFIG_OMAP_MUX
static struct omap_mux_cfg arch_mux_cfg;
#ifdef CONFIG_ARCH_OMAP730
static struct pin_config __initdata_or_module omap730_pins[] = {
MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0)
MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0)
MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0)
MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0)
MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0)
MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0)
MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0)
MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0)
MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0)
MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0)
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
static struct pin_config __initdata_or_module omap7xx_pins[] = {
MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0)
MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0)
MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0)
MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0)
MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0)
MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0)
MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0)
MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0)
MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0)
MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0)
MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0)
MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0)
MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0)
MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0)
MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0)
MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0)
};
#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins)
#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
#else
#define omap730_pins NULL
#define OMAP730_PINS_SZ 0
#endif /* CONFIG_ARCH_OMAP730 */
#ifdef CONFIG_ARCH_OMAP850
struct pin_config __initdata_or_module omap850_pins[] = {
MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0)
MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0)
MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0)
MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0)
MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0)
MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0)
MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0)
MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0)
MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0)
MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0)
MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0)
MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0)
MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0)
};
#endif
#define omap7xx_pins NULL
#define OMAP7XX_PINS_SZ 0
#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
static struct pin_config __initdata_or_module omap1xxx_pins[] = {
@ -438,11 +419,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
cfg->pull_name, cfg->pull_reg, pull_orig, pull);
}
#ifdef CONFIG_ARCH_OMAP850
omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
#endif
#endif
#ifdef CONFIG_OMAP_MUX_ERRORS
@ -454,9 +430,9 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
int __init omap1_mux_init(void)
{
if (cpu_is_omap730()) {
arch_mux_cfg.pins = omap730_pins;
arch_mux_cfg.size = OMAP730_PINS_SZ;
if (cpu_is_omap7xx()) {
arch_mux_cfg.pins = omap7xx_pins;
arch_mux_cfg.size = OMAP7XX_PINS_SZ;
arch_mux_cfg.cfg_reg = omap1_cfg_reg;
}

114
arch/arm/mach-omap1/pm.c
View File

@ -48,21 +48,21 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <mach/cpu.h>
#include <plat/cpu.h>
#include <mach/irqs.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <mach/tc.h>
#include <mach/mux.h>
#include <mach/dma.h>
#include <mach/dmtimer.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/tc.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include "pm.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
@ -183,9 +183,9 @@ static void omap_pm_wakeup_setup(void)
* drivers must still separately call omap_set_gpio_wakeup() to
* wake up to a GPIO interrupt.
*/
if (cpu_is_omap730())
level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
OMAP_IRQ_BIT(INT_730_IH2_IRQ);
if (cpu_is_omap7xx())
level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
else if (cpu_is_omap15xx())
level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
@ -195,10 +195,10 @@ static void omap_pm_wakeup_setup(void)
omap_writel(~level1_wake, OMAP_IH1_MIR);
if (cpu_is_omap730()) {
if (cpu_is_omap7xx()) {
omap_writel(~level2_wake, OMAP_IH2_0_MIR);
omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
OMAP_IH2_1_MIR);
} else if (cpu_is_omap15xx()) {
level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
@ -253,15 +253,15 @@ void omap1_pm_suspend(void)
* Save interrupt, MPUI, ARM and UPLD control registers.
*/
if (cpu_is_omap730()) {
MPUI730_SAVE(OMAP_IH1_MIR);
MPUI730_SAVE(OMAP_IH2_0_MIR);
MPUI730_SAVE(OMAP_IH2_1_MIR);
MPUI730_SAVE(MPUI_CTRL);
MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI730_SAVE(MPUI_DSP_API_CONFIG);
MPUI730_SAVE(EMIFS_CONFIG);
MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
if (cpu_is_omap7xx()) {
MPUI7XX_SAVE(OMAP_IH1_MIR);
MPUI7XX_SAVE(OMAP_IH2_0_MIR);
MPUI7XX_SAVE(OMAP_IH2_1_MIR);
MPUI7XX_SAVE(MPUI_CTRL);
MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
MPUI7XX_SAVE(EMIFS_CONFIG);
MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
} else if (cpu_is_omap15xx()) {
MPUI1510_SAVE(OMAP_IH1_MIR);
@ -306,7 +306,7 @@ void omap1_pm_suspend(void)
omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
/* shut down dsp_ck */
if (!cpu_is_omap730())
if (!cpu_is_omap7xx())
omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
/* temporarily enabling api_ck to access DSP registers */
@ -383,12 +383,12 @@ void omap1_pm_suspend(void)
ULPD_RESTORE(ULPD_CLOCK_CTRL);
ULPD_RESTORE(ULPD_STATUS_REQ);
if (cpu_is_omap730()) {
MPUI730_RESTORE(EMIFS_CONFIG);
MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
MPUI730_RESTORE(OMAP_IH1_MIR);
MPUI730_RESTORE(OMAP_IH2_0_MIR);
MPUI730_RESTORE(OMAP_IH2_1_MIR);
if (cpu_is_omap7xx()) {
MPUI7XX_RESTORE(EMIFS_CONFIG);
MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
MPUI7XX_RESTORE(OMAP_IH1_MIR);
MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
} else if (cpu_is_omap15xx()) {
MPUI1510_RESTORE(MPUI_CTRL);
MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
@ -461,13 +461,13 @@ static int omap_pm_read_proc(
ULPD_SAVE(ULPD_DPLL_CTRL);
ULPD_SAVE(ULPD_POWER_CTRL);
if (cpu_is_omap730()) {
MPUI730_SAVE(MPUI_CTRL);
MPUI730_SAVE(MPUI_DSP_STATUS);
MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI730_SAVE(MPUI_DSP_API_CONFIG);
MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
MPUI730_SAVE(EMIFS_CONFIG);
if (cpu_is_omap7xx()) {
MPUI7XX_SAVE(MPUI_CTRL);
MPUI7XX_SAVE(MPUI_DSP_STATUS);
MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
MPUI7XX_SAVE(EMIFS_CONFIG);
} else if (cpu_is_omap15xx()) {
MPUI1510_SAVE(MPUI_CTRL);
MPUI1510_SAVE(MPUI_DSP_STATUS);
@ -517,20 +517,20 @@ static int omap_pm_read_proc(
ULPD_SHOW(ULPD_STATUS_REQ),
ULPD_SHOW(ULPD_POWER_CTRL));
if (cpu_is_omap730()) {
if (cpu_is_omap7xx()) {
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"MPUI730_CTRL_REG 0x%-8x \n"
"MPUI730_DSP_STATUS_REG: 0x%-8x \n"
"MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
"MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n"
"MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n"
"MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n",
MPUI730_SHOW(MPUI_CTRL),
MPUI730_SHOW(MPUI_DSP_STATUS),
MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
MPUI730_SHOW(MPUI_DSP_API_CONFIG),
MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
MPUI730_SHOW(EMIFS_CONFIG));
"MPUI7XX_CTRL_REG 0x%-8x \n"
"MPUI7XX_DSP_STATUS_REG: 0x%-8x \n"
"MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
"MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n"
"MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n"
"MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n",
MPUI7XX_SHOW(MPUI_CTRL),
MPUI7XX_SHOW(MPUI_DSP_STATUS),
MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
MPUI7XX_SHOW(EMIFS_CONFIG));
} else if (cpu_is_omap15xx()) {
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"MPUI1510_CTRL_REG 0x%-8x \n"
@ -668,9 +668,9 @@ static int __init omap_pm_init(void)
* These routines need to be in SRAM as that's the only
* memory the MPU can see when it wakes up.
*/
if (cpu_is_omap730()) {
omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
omap730_cpu_suspend_sz);
if (cpu_is_omap7xx()) {
omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
omap7xx_cpu_suspend_sz);
} else if (cpu_is_omap15xx()) {
omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
omap1510_cpu_suspend_sz);
@ -686,8 +686,8 @@ static int __init omap_pm_init(void)
pm_idle = omap1_pm_idle;
if (cpu_is_omap730())
setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
if (cpu_is_omap7xx())
setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
else if (cpu_is_omap16xx())
setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
@ -700,8 +700,8 @@ static int __init omap_pm_init(void)
omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
/* Configure IDLECT3 */
if (cpu_is_omap730())
omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
if (cpu_is_omap7xx())
omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
else if (cpu_is_omap16xx())
omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);

53
arch/arm/mach-omap1/pm.h
View File

@ -98,13 +98,14 @@
#define OMAP1610_IDLECT3 0xfffece24
#define OMAP1610_IDLE_LOOP_REQUEST 0x0400
#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7
#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7
#define OMAP730_IDLECT3_VAL 0x3f
#define OMAP730_IDLECT3 0xfffece24
#define OMAP730_IDLE_LOOP_REQUEST 0x0C00
#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7
#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7
#define OMAP7XX_IDLECT3_VAL 0x3f
#define OMAP7XX_IDLECT3 0xfffece24
#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00
#if !defined(CONFIG_ARCH_OMAP730) && \
!defined(CONFIG_ARCH_OMAP850) && \
!defined(CONFIG_ARCH_OMAP15XX) && \
!defined(CONFIG_ARCH_OMAP16XX)
#warning "Power management for this processor not implemented yet"
@ -122,17 +123,17 @@ extern void allow_idle_sleep(void);
extern void omap1_pm_idle(void);
extern void omap1_pm_suspend(void);
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
extern void omap730_idle_loop_suspend(void);
extern void omap7xx_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
extern unsigned int omap730_cpu_suspend_sz;
extern unsigned int omap7xx_cpu_suspend_sz;
extern unsigned int omap1510_cpu_suspend_sz;
extern unsigned int omap1610_cpu_suspend_sz;
extern unsigned int omap730_idle_loop_suspend_sz;
extern unsigned int omap7xx_idle_loop_suspend_sz;
extern unsigned int omap1510_idle_loop_suspend_sz;
extern unsigned int omap1610_idle_loop_suspend_sz;
@ -155,9 +156,9 @@ extern void omap_serial_wake_trigger(int enable);
#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
@ -232,24 +233,24 @@ enum mpui1510_save_state {
#endif
};
enum mpui730_save_state {
MPUI730_SLEEP_SAVE_START = 0,
enum mpui7xx_save_state {
MPUI7XX_SLEEP_SAVE_START = 0,
/*
* MPUI registers 32 bits
*/
MPUI730_SLEEP_SAVE_MPUI_CTRL,
MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
#if defined(CONFIG_ARCH_OMAP730)
MPUI730_SLEEP_SAVE_SIZE
MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
MPUI7XX_SLEEP_SAVE_SIZE
#else
MPUI730_SLEEP_SAVE_SIZE = 0
MPUI7XX_SLEEP_SAVE_SIZE = 0
#endif
};

30
arch/arm/mach-omap1/serial.c
View File

@ -22,10 +22,10 @@
#include <asm/mach-types.h>
#include <mach/board.h>
#include <mach/mux.h>
#include <plat/board.h>
#include <plat/mux.h>
#include <mach/gpio.h>
#include <mach/fpga.h>
#include <plat/fpga.h>
static struct clk * uart1_ck;
static struct clk * uart2_ck;
@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
.irq = INT_UART1,
.flags = UPF_BOOT_AUTOCONF,
@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
.membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = INT_UART2,
.flags = UPF_BOOT_AUTOCONF,
@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
.membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = INT_UART3,
.flags = UPF_BOOT_AUTOCONF,
@ -110,18 +107,11 @@ void __init omap_serial_init(void)
{
int i;
if (cpu_is_omap730()) {
if (cpu_is_omap7xx()) {
serial_platform_data[0].regshift = 0;
serial_platform_data[1].regshift = 0;
serial_platform_data[0].irq = INT_730_UART_MODEM_1;
serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
}
if (cpu_is_omap850()) {
serial_platform_data[0].regshift = 0;
serial_platform_data[1].regshift = 0;
serial_platform_data[0].irq = INT_850_UART_MODEM_1;
serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
}
if (cpu_is_omap15xx()) {
@ -131,6 +121,14 @@ void __init omap_serial_init(void)
}
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
/* Static mapping, never released */
serial_platform_data[i].membase =
ioremap(serial_platform_data[i].mapbase, SZ_2K);
if (!serial_platform_data[i].membase) {
printk(KERN_ERR "Could not ioremap uart%i\n", i);
continue;
}
switch (i) {
case 0:
uart1_ck = clk_get(NULL, "uart1_ck");

22
arch/arm/mach-omap1/sleep.S
View File

@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-omap1/sleep.S
*
* Low-level OMAP730/1510/1610 sleep/wakeUp support
* Low-level OMAP7XX/1510/1610 sleep/wakeUp support
*
* Initial SA1110 code:
* Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
@ -57,8 +57,8 @@
*
*/
#if defined(CONFIG_ARCH_OMAP730)
ENTRY(omap730_cpu_suspend)
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
ENTRY(omap7xx_cpu_suspend)
@ save registers on stack
stmfd sp!, {r0 - r12, lr}
@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend)
@ turn off clock domains
@ do not disable PERCK (0x04)
mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
@ request ARM idle
mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
@ disable instruction cache
@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend)
mov r2, #0
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
/*
* omap730_cpu_suspend()'s resume point.
* omap7xx_cpu_suspend()'s resume point.
*
* It will just start executing here, so we'll restore stuff from the
* stack.
@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend)
@ restore regs and return
ldmfd sp!, {r0 - r12, pc}
ENTRY(omap730_cpu_suspend_sz)
.word . - omap730_cpu_suspend
#endif /* CONFIG_ARCH_OMAP730 */
ENTRY(omap7xx_cpu_suspend_sz)
.word . - omap7xx_cpu_suspend
#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
#ifdef CONFIG_ARCH_OMAP15XX
ENTRY(omap1510_cpu_suspend)

2
arch/arm/mach-omap1/timer32k.c
View File

@ -52,7 +52,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
#include <plat/dmtimer.h>
struct sys_timer omap_timer;

14
arch/arm/mach-omap2/board-2430sdp.c
View File

@ -31,12 +31,12 @@
#include <asm/mach/flash.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
#include <mach/gpmc-smc91x.h>
#include <plat/mux.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
#include "mmc-twl4030.h"
@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void)
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_2430sdp_map_io,
.init_irq = omap_2430sdp_init_irq,

20
arch/arm/mach-omap2/board-3430sdp.c
View File

@ -30,16 +30,16 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/mcspi.h>
#include <mach/mux.h>
#include <mach/board.h>
#include <mach/usb.h>
#include <mach/common.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <plat/mcspi.h>
#include <plat/mux.h>
#include <plat/board.h>
#include <plat/usb.h>
#include <plat/common.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <mach/control.h>
#include <mach/gpmc-smc91x.h>
#include <plat/control.h>
#include <plat/gpmc-smc91x.h>
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
@ -511,7 +511,7 @@ static void __init omap_3430sdp_map_io(void)
MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_3430sdp_map_io,
.init_irq = omap_3430sdp_init_irq,

23
arch/arm/mach-omap2/board-4430sdp.c
View File

@ -23,10 +23,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/control.h>
#include <mach/timer-gp.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/control.h>
#include <plat/timer-gp.h>
#include <asm/hardware/gic.h>
static struct platform_device sdp4430_lcd_device = {
@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
static void __init gic_init_irq(void)
{
gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
void __iomem *base;
/* Static mapping, never released */
base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
BUG_ON(!base);
gic_dist_init(0, base, 29);
/* Static mapping, never released */
gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
BUG_ON(!gic_cpu_base_addr);
gic_cpu_init(0, gic_cpu_base_addr);
}
static void __init omap_4430sdp_init_irq(void)
@ -84,7 +93,7 @@ static void __init omap_4430sdp_map_io(void)
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_4430sdp_map_io,
.init_irq = omap_4430sdp_init_irq,

16
arch/arm/mach-omap2/board-apollon.c
View File

@ -33,13 +33,13 @@
#include <asm/mach/flash.h>
#include <mach/gpio.h>
#include <mach/led.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpmc.h>
#include <mach/control.h>
#include <plat/led.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
#include <plat/control.h>
/* LED & Switch macros */
#define LED0_GPIO13 13
@ -333,7 +333,7 @@ static void __init omap_apollon_map_io(void)
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_apollon_map_io,
.init_irq = omap_apollon_init_irq,

10
arch/arm/mach-omap2/board-generic.c
View File

@ -26,10 +26,10 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/board.h>
#include <mach/common.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
static struct omap_board_config_kernel generic_config[] = {
};
@ -56,7 +56,7 @@ static void __init omap_generic_map_io(void)
MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_generic_map_io,
.init_irq = omap_generic_init_irq,

20
arch/arm/mach-omap2/board-h4.c
View File

@ -31,16 +31,16 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/control.h>
#include <plat/control.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
#include <mach/menelaus.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
@ -376,7 +376,7 @@ static void __init omap_h4_map_io(void)
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_h4_map_io,
.init_irq = omap_h4_init_irq,

14
arch/arm/mach-omap2/board-ldp.c
View File

@ -33,15 +33,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/mcspi.h>
#include <plat/mcspi.h>
#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpmc.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
#include <asm/delay.h>
#include <mach/control.h>
#include <mach/usb.h>
#include <plat/control.h>
#include <plat/usb.h>
#include "mmc-twl4030.h"
@ -399,7 +399,7 @@ static void __init omap_ldp_map_io(void)
MACHINE_START(OMAP_LDP, "OMAP LDP board")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_ldp_map_io,
.init_irq = omap_ldp_init_irq,

16
arch/arm/mach-omap2/board-n8x0.c
View File

@ -23,12 +23,12 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/board.h>
#include <mach/common.h>
#include <plat/board.h>
#include <plat/common.h>
#include <mach/irqs.h>
#include <mach/mcspi.h>
#include <mach/onenand.h>
#include <mach/serial.h>
#include <plat/mcspi.h>
#include <plat/onenand.h>
#include <plat/serial.h>
static struct omap2_mcspi_device_config p54spi_mcspi_config = {
.turbo_mode = 0,
@ -121,7 +121,7 @@ static void __init n8x0_init_machine(void)
MACHINE_START(NOKIA_N800, "Nokia N800")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
.init_irq = n8x0_init_irq,
@ -131,7 +131,7 @@ MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
.init_irq = n8x0_init_irq,
@ -141,7 +141,7 @@ MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
.init_irq = n8x0_init_irq,

16
arch/arm/mach-omap2/board-omap3beagle.c
View File

@ -37,13 +37,13 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpmc.h>
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/timer-gp.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/timer-gp.h>
#include "mmc-twl4030.h"
@ -429,7 +429,7 @@ static void __init omap3_beagle_map_io(void)
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap3_beagle_map_io,
.init_irq = omap3_beagle_init_irq,

12
arch/arm/mach-omap2/board-omap3evm.c
View File

@ -33,11 +33,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/common.h>
#include <mach/mcspi.h>
#include <plat/board.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/common.h>
#include <plat/mcspi.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@ -324,7 +324,7 @@ static void __init omap3_evm_map_io(void)
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap3_evm_map_io,
.init_irq = omap3_evm_init_irq,

12
arch/arm/mach-omap2/board-omap3pandora.c
View File

@ -34,13 +34,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board.h>
#include <mach/common.h>
#include <plat/board.h>
#include <plat/common.h>
#include <mach/gpio.h>
#include <mach/hardware.h>
#include <mach/mcspi.h>
#include <mach/usb.h>
#include <mach/mux.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
#include <plat/mux.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@ -412,7 +412,7 @@ static void __init omap3pandora_map_io(void)
MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap3pandora_map_io,
.init_irq = omap3pandora_init_irq,

16
arch/arm/mach-omap2/board-overo.c
View File

@ -38,14 +38,14 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/board.h>
#include <mach/common.h>
#include <plat/board.h>
#include <plat/common.h>
#include <mach/gpio.h>
#include <mach/gpmc.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <plat/nand.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@ -67,7 +67,7 @@
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
#include <mach/mcspi.h>
#include <plat/mcspi.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@ -451,7 +451,7 @@ static void __init overo_map_io(void)
MACHINE_START(OVERO, "Gumstix Overo")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = overo_map_io,
.init_irq = overo_init_irq,

16
arch/arm/mach-omap2/board-rx51-peripherals.c
View File

@ -22,14 +22,14 @@
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <mach/mcspi.h>
#include <mach/mux.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/onenand.h>
#include <mach/gpmc-smc91x.h>
#include <plat/mcspi.h>
#include <plat/mux.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/onenand.h>
#include <plat/gpmc-smc91x.h>
#include "mmc-twl4030.h"

16
arch/arm/mach-omap2/board-rx51.c
View File

@ -22,13 +22,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/mcspi.h>
#include <mach/mux.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
#include <plat/mcspi.h>
#include <plat/mux.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
static struct omap_lcd_config rx51_lcd_config = {
.ctrl_name = "internal",
@ -84,7 +84,7 @@ static void __init rx51_map_io(void)
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = rx51_map_io,
.init_irq = rx51_init_irq,

2
arch/arm/mach-omap2/board-zoom-debugboard.c
View File

@ -14,7 +14,7 @@
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <mach/gpmc.h>
#include <plat/gpmc.h>
#define ZOOM2_SMSC911X_CS 7
#define ZOOM2_SMSC911X_GPIO 158

6
arch/arm/mach-omap2/board-zoom2.c
View File

@ -21,8 +21,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/usb.h>
#include <plat/common.h>
#include <plat/usb.h>
#include "mmc-twl4030.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@ -283,7 +283,7 @@ static void __init omap_zoom2_map_io(void)
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_zoom2_map_io,
.init_irq = omap_zoom2_init_irq,

10
arch/arm/mach-omap2/clock.c
View File

@ -24,13 +24,13 @@
#include <linux/io.h>
#include <linux/bitops.h>
#include <mach/clock.h>
#include <mach/clockdomain.h>
#include <mach/cpu.h>
#include <mach/prcm.h>
#include <plat/clock.h>
#include <plat/clockdomain.h>
#include <plat/cpu.h>
#include <plat/prcm.h>
#include <asm/div64.h>
#include <mach/sdrc.h>
#include <plat/sdrc.h>
#include "sdrc.h"
#include "clock.h"
#include "prm.h"

2
arch/arm/mach-omap2/clock.h
View File

@ -16,7 +16,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
#include <mach/clock.h>
#include <plat/clock.h>
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000

8
arch/arm/mach-omap2/clock24xx.c
View File

@ -28,13 +28,13 @@
#include <linux/cpufreq.h>
#include <linux/bitops.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <mach/prcm.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/prcm.h>
#include <asm/div64.h>
#include <asm/clkdev.h>
#include <mach/sdrc.h>
#include <plat/sdrc.h>
#include "clock.h"
#include "prm.h"
#include "prm-regbits-24xx.h"

8
arch/arm/mach-omap2/clock34xx.c
View File

@ -27,13 +27,13 @@
#include <linux/limits.h>
#include <linux/bitops.h>
#include <mach/cpu.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <asm/div64.h>
#include <asm/clkdev.h>
#include <mach/sdrc.h>
#include <plat/sdrc.h>
#include "clock.h"
#include "prm.h"
#include "prm-regbits-34xx.h"

2
arch/arm/mach-omap2/clock34xx.h
View File

@ -19,7 +19,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
#include <mach/control.h>
#include <plat/control.h>
#include "clock.h"
#include "cm.h"

6
arch/arm/mach-omap2/clockdomain.c
View File

@ -28,14 +28,14 @@
#include <linux/bitops.h>
#include <mach/clock.h>
#include <plat/clock.h>
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include <mach/powerdomain.h>
#include <mach/clockdomain.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
/* clkdm_list contains all registered struct clockdomains */
static LIST_HEAD(clkdm_list);

2
arch/arm/mach-omap2/clockdomains.h
View File

@ -10,7 +10,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
#include <mach/clockdomain.h>
#include <plat/clockdomain.h>
/*
* OMAP2/3-common clockdomains

6
arch/arm/mach-omap2/cm.h
View File

@ -17,11 +17,11 @@
#include "prcm-common.h"
#define OMAP2420_CM_REGADDR(module, reg) \
OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
/*
* Architecture-specific global CM registers

4
arch/arm/mach-omap2/control.c
View File

@ -15,8 +15,8 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include <mach/common.h>
#include <mach/control.h>
#include <plat/common.h>
#include <plat/control.h>
static void __iomem *omap2_ctrl_base;

12
arch/arm/mach-omap2/devices.c
View File

@ -20,12 +20,12 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <mach/control.h>
#include <mach/tc.h>
#include <mach/board.h>
#include <mach/mux.h>
#include <plat/control.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
#include <mach/gpio.h>
#include <mach/mmc.h>
#include <plat/mmc.h>
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
@ -250,7 +250,7 @@ static inline void omap_init_sti(void) {}
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <mach/mcspi.h>
#include <plat/mcspi.h>
#define OMAP2_MCSPI1_BASE 0x48098000
#define OMAP2_MCSPI2_BASE 0x4809a000

6
arch/arm/mach-omap2/gpmc-onenand.c
View File

@ -17,9 +17,9 @@
#include <asm/mach/flash.h>
#include <mach/onenand.h>
#include <mach/board.h>
#include <mach/gpmc.h>
#include <plat/onenand.h>
#include <plat/board.h>
#include <plat/gpmc.h>
static struct omap_onenand_platform_data *gpmc_onenand_data;

6
arch/arm/mach-omap2/gpmc-smc91x.c
View File

@ -17,9 +17,9 @@
#include <linux/io.h>
#include <linux/smc91x.h>
#include <mach/board.h>
#include <mach/gpmc.h>
#include <mach/gpmc-smc91x.h>
#include <plat/board.h>
#include <plat/gpmc.h>
#include <plat/gpmc-smc91x.h>
static struct omap_smc91x_platform_data *gpmc_cfg;

4
arch/arm/mach-omap2/gpmc.c
View File

@ -24,9 +24,9 @@
#include <linux/module.h>
#include <asm/mach-types.h>
#include <mach/gpmc.h>
#include <plat/gpmc.h>
#include <mach/sdrc.h>
#include <plat/sdrc.h>
/* GPMC register offsets */
#define GPMC_REVISION 0x00

6
arch/arm/mach-omap2/id.c
View File

@ -21,9 +21,9 @@
#include <asm/cputype.h>
#include <mach/common.h>
#include <mach/control.h>
#include <mach/cpu.h>
#include <plat/common.h>
#include <plat/control.h>
#include <plat/cpu.h>
static struct omap_chip_id omap_chip;
static unsigned int omap_revision;

5
arch/arm/mach-omap2/include/mach/clkdev.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/clkdev.h
*/
#include <plat/clkdev.h>

19
arch/arm/plat-omap/include/mach/debug-macro.S → arch/arm/mach-omap2/include/mach/debug-macro.S
View File

@ -1,4 +1,4 @@
/* arch/arm/plat-omap/include/mach/debug-macro.S
/* arch/arm/mach-omap2/include/mach/debug-macro.S
*
* Debugging macro include header
*
@ -14,20 +14,9 @@
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
#ifdef CONFIG_ARCH_OMAP1
moveq \rx, #0xff000000 @ physical base address
movne \rx, #0xfe000000 @ virtual base
orr \rx, \rx, #0x00fb0000
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
orr \rx, \rx, #0x00009000 @ UART 3
#endif
#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
orr \rx, \rx, #0x00000800 @ UART 2 & 3
#endif
#elif CONFIG_ARCH_OMAP2
#ifdef CONFIG_ARCH_OMAP2
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xd8000000 @ virtual base
movne \rx, #0xfa000000 @ virtual base
orr \rx, \rx, #0x0006a000
#ifdef CONFIG_OMAP_LL_DEBUG_UART2
add \rx, \rx, #0x00002000 @ UART 2
@ -38,7 +27,7 @@
#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xd8000000 @ virtual base
movne \rx, #0xfa000000 @ virtual base
orr \rx, \rx, #0x0006a000
#ifdef CONFIG_OMAP_LL_DEBUG_UART2
add \rx, \rx, #0x00002000 @ UART 2

62
arch/arm/plat-omap/include/mach/entry-macro.S → arch/arm/mach-omap2/include/mach/entry-macro.S
View File

@ -15,65 +15,17 @@
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
#if defined(CONFIG_ARCH_OMAP1)
#if defined(CONFIG_ARCH_OMAP730) && \
(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
#error "FIXME: OMAP730 doesn't support multiple-OMAP"
#elif defined(CONFIG_ARCH_OMAP730)
#define INT_IH2_IRQ INT_730_IH2_IRQ
#elif defined(CONFIG_ARCH_OMAP15XX)
#define INT_IH2_IRQ INT_1510_IH2_IRQ
#elif defined(CONFIG_ARCH_OMAP16XX)
#define INT_IH2_IRQ INT_1610_IH2_IRQ
#else
#warning "IH2 IRQ defaulted"
#define INT_IH2_IRQ INT_1510_IH2_IRQ
#endif
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET]
mov \irqstat, #0xffffffff
bic \tmp, \irqstat, \tmp
tst \irqnr, \tmp
beq 1510f
ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
cmp \irqnr, #0
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
cmpeq \irqnr, #INT_IH2_IRQ
ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
addeqs \irqnr, \irqnr, #32
1510:
.endm
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
defined(CONFIG_ARCH_OMAP4)
#include <mach/omap24xx.h>
#include <mach/omap34xx.h>
#include <plat/omap24xx.h>
#include <plat/omap34xx.h>
/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
#elif defined(CONFIG_ARCH_OMAP34XX)
#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
#endif
#if defined(CONFIG_ARCH_OMAP4)
#include <mach/omap44xx.h>
#include <plat/omap44xx.h>
#endif
#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */
#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */
@ -104,6 +56,8 @@
.endm
#else
#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
@ -168,5 +122,3 @@
.macro irq_prio_table
.endm
#endif

5
arch/arm/mach-omap2/include/mach/gpio.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/gpio.h
*/
#include <plat/gpio.h>

5
arch/arm/mach-omap2/include/mach/hardware.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/hardware.h
*/
#include <plat/hardware.h>

5
arch/arm/mach-omap2/include/mach/io.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/io.h
*/
#include <plat/io.h>

5
arch/arm/mach-omap2/include/mach/irqs.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/irqs.h
*/
#include <plat/irqs.h>

5
arch/arm/mach-omap2/include/mach/memory.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/memory.h
*/
#include <plat/memory.h>

5
arch/arm/mach-omap2/include/mach/smp.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/smp.h
*/
#include <plat/smp.h>

5
arch/arm/mach-omap2/include/mach/system.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/system.h
*/
#include <plat/system.h>

5
arch/arm/mach-omap2/include/mach/timex.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/timex.h
*/
#include <plat/timex.h>

5
arch/arm/mach-omap2/include/mach/uncompress.h Normal file
View File

@ -0,0 +1,5 @@
/*
* arch/arm/mach-omap2/include/mach/uncompress.h
*/
#include <plat/uncompress.h>

3
arch/arm/plat-omap/include/mach/vmalloc.h → arch/arm/mach-omap2/include/mach/vmalloc.h
View File

@ -17,5 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
#define VMALLOC_END (PAGE_OFFSET + 0x38000000)

38
arch/arm/mach-omap2/io.c
View File

@ -27,24 +27,24 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <mach/omapfb.h>
#include <mach/sram.h>
#include <mach/sdrc.h>
#include <mach/gpmc.h>
#include <mach/serial.h>
#include <plat/mux.h>
#include <plat/omapfb.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include <plat/gpmc.h>
#include <plat/serial.h>
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
#include "clock.h"
#include <mach/omap-pm.h>
#include <mach/powerdomain.h>
#include <plat/omap-pm.h>
#include <plat/powerdomain.h>
#include "powerdomains.h"
#include <mach/clockdomain.h>
#include <plat/clockdomain.h>
#include "clockdomains.h"
#endif
#include <mach/omap_hwmod.h>
#include <plat/omap_hwmod.h>
#include "omap_hwmod_2420.h"
#include "omap_hwmod_2430.h"
#include "omap_hwmod_34xx.h"
@ -202,6 +202,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
.length = OMAP44XX_GPMC_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_EMIF1_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
.length = OMAP44XX_EMIF1_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_EMIF2_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
.length = OMAP44XX_EMIF2_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_DMM_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS),
.length = OMAP44XX_DMM_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER_44XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_44XX_PHYS),

2
arch/arm/mach-omap2/iommu2.c
View File

@ -17,7 +17,7 @@
#include <linux/module.h>
#include <linux/stringify.h>
#include <mach/iommu.h>
#include <plat/iommu.h>
/*
* omap2 architecture specific register bit definitions

12
arch/arm/mach-omap2/irq.c
View File

@ -178,12 +178,20 @@ void __init omap_init_irq(void)
int i;
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
unsigned long base;
struct omap_irq_bank *bank = irq_banks + i;
if (cpu_is_omap24xx())
bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
base = OMAP24XX_IC_BASE;
else if (cpu_is_omap34xx())
bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
base = OMAP34XX_IC_BASE;
/* Static mapping, never released */
bank->base_reg = ioremap(base, SZ_4K);
if (!bank->base_reg) {
printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
continue;
}
omap_irq_bank_init_one(bank);

2
arch/arm/mach-omap2/mailbox.c
View File

@ -15,7 +15,7 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/mailbox.h>
#include <plat/mailbox.h>
#include <mach/irqs.h>
#define MAILBOX_REVISION 0x000

8
arch/arm/mach-omap2/mcbsp.c
View File

@ -18,10 +18,10 @@
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/cpu.h>
#include <plat/mcbsp.h>
static void omap2_mcbsp2_mux_setup(void)
{

6
arch/arm/mach-omap2/mmc-twl4030.c
View File

@ -20,9 +20,9 @@
#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <mach/control.h>
#include <mach/mmc.h>
#include <mach/board.h>
#include <plat/control.h>
#include <plat/mmc.h>
#include <plat/board.h>
#include "mmc-twl4030.h"

4
arch/arm/mach-omap2/mux.c
View File

@ -30,8 +30,8 @@
#include <asm/system.h>
#include <mach/control.h>
#include <mach/mux.h>
#include <plat/control.h>
#include <plat/mux.h>
#ifdef CONFIG_OMAP_MUX

29
arch/arm/mach-omap2/omap-smp.c
View File

@ -24,13 +24,14 @@
#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <plat/common.h>
/* Registers used for communicating startup information */
#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800)
#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804)
static void __iomem *omap4_auxcoreboot_reg0;
static void __iomem *omap4_auxcoreboot_reg1;
/* SCU base address */
static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
static void __iomem *scu_base;
/*
* Use SCU config register to count number of cores
@ -53,8 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
gic_cpu_init(0, gic_cpu_base_addr);
/*
* Synchronise with the boot thread.
@ -79,7 +79,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
__raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
__raw_writel(cpu, omap4_auxcoreboot_reg1);
smp_wmb();
timeout = jiffies + (1 * HZ);
@ -104,7 +104,7 @@ static void __init wakeup_secondary(void)
* A barrier is added to ensure that write buffer is drained
*/
__raw_writel(virt_to_phys(omap_secondary_startup), \
OMAP4_AUXCOREBOOT_REG0);
omap4_auxcoreboot_reg0);
smp_wmb();
/*
@ -120,7 +120,13 @@ static void __init wakeup_secondary(void)
*/
void __init smp_init_cpus(void)
{
unsigned int i, ncores = get_core_count();
unsigned int i, ncores;
/* Never released */
scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
BUG_ON(!scu_base);
ncores = get_core_count();
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
@ -130,6 +136,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned int ncores = get_core_count();
unsigned int cpu = smp_processor_id();
void __iomem *omap4_wkupgen_base;
int i;
/* sanity check */
@ -161,6 +168,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
/* Never released */
omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
BUG_ON(!omap4_wkupgen_base);
omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800;
omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804;
if (max_cpus > 1) {
/*
* Enable the local timer or broadcast device for the

2
arch/arm/mach-omap2/omap3-iommu.c
View File

@ -12,7 +12,7 @@
#include <linux/platform_device.h>
#include <mach/iommu.h>
#include <plat/iommu.h>
#define OMAP3_MMU1_BASE 0x480bd400
#define OMAP3_MMU2_BASE 0x5d000000

28
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -45,11 +45,11 @@
#include <linux/mutex.h>
#include <linux/bootmem.h>
#include <mach/cpu.h>
#include <mach/clockdomain.h>
#include <mach/powerdomain.h>
#include <mach/clock.h>
#include <mach/omap_hwmod.h>
#include <plat/cpu.h>
#include <plat/clockdomain.h>
#include <plat/powerdomain.h>
#include <plat/clock.h>
#include <plat/omap_hwmod.h>
#include "cm.h"
@ -496,6 +496,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
struct omap_hwmod_addr_space *mem;
int i;
int found = 0;
void __iomem *va_start;
if (!oh || oh->slaves_cnt == 0)
return NULL;
@ -509,16 +510,20 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
}
}
/* XXX use ioremap() instead? */
if (found)
if (found) {
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
if (!va_start) {
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
return NULL;
}
pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
oh->name, OMAP2_IO_ADDRESS(mem->pa_start));
else
oh->name, va_start);
} else {
pr_debug("omap_hwmod: %s: no MPU register target found\n",
oh->name);
}
return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL;
return (found) ? va_start : NULL;
}
/**
@ -1148,6 +1153,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
mutex_lock(&omap_hwmod_mutex);
iounmap(oh->_rt_va);
list_del(&oh->node);
mutex_unlock(&omap_hwmod_mutex);

Some files were not shown because too many files have changed in this diff Show More