From 09e52d17b72d3a4bf6951a90ccd8c97fae04e5cf Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 17 Aug 2022 15:04:00 +0200 Subject: [PATCH 1/3] hwmon: (pmbus) Use dev_err_probe() to filter -EPROBE_DEFER error messages devm_regulator_register() can return -EPROBE_DEFER, so better use dev_err_probe() instead of dev_err(), it is less verbose in such a case. It is also more informative, which can't hurt. Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/3adf1cea6e32e54c0f71f4604b4e98d992beaa71.1660741419.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus_core.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index f10bac8860fc..75cf8e20fa4d 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -3016,11 +3016,10 @@ static int pmbus_regulator_register(struct pmbus_data *data) rdev = devm_regulator_register(dev, &info->reg_desc[i], &config); - if (IS_ERR(rdev)) { - dev_err(dev, "Failed to register %s regulator\n", - info->reg_desc[i].name); - return PTR_ERR(rdev); - } + if (IS_ERR(rdev)) + return dev_err_probe(dev, PTR_ERR(rdev), + "Failed to register %s regulator\n", + info->reg_desc[i].name); } return 0; From ed3590561f5d3343a1717396307d0942eda472ed Mon Sep 17 00:00:00 2001 From: Vincent Whitchurch Date: Tue, 16 Aug 2022 16:44:14 +0200 Subject: [PATCH 2/3] hwmon: (pmbus) Fix vout margin caching The code currently uses a zero margin to mean not cached, but this results in the cache being bypassed if the (low) margin is set to zero, leading to lots of unnecessary SMBus transactions in that case. Use a negative value instead. Fixes: 07fb76273db89d93 ("hwmon: (pmbus) Introduce and use cached vout margins") Signed-off-by: Vincent Whitchurch Link: https://lore.kernel.org/r/20220816144414.2358974-1-vincent.whitchurch@axis.com Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus_core.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 75cf8e20fa4d..81d3f91dd204 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -2861,7 +2861,7 @@ static int pmbus_regulator_get_low_margin(struct i2c_client *client, int page) .data = -1, }; - if (!data->vout_low[page]) { + if (data->vout_low[page] < 0) { if (pmbus_check_word_register(client, page, PMBUS_MFR_VOUT_MIN)) s.data = _pmbus_read_word_data(client, page, 0xff, PMBUS_MFR_VOUT_MIN); @@ -2887,7 +2887,7 @@ static int pmbus_regulator_get_high_margin(struct i2c_client *client, int page) .data = -1, }; - if (!data->vout_high[page]) { + if (data->vout_high[page] < 0) { if (pmbus_check_word_register(client, page, PMBUS_MFR_VOUT_MAX)) s.data = _pmbus_read_word_data(client, page, 0xff, PMBUS_MFR_VOUT_MAX); @@ -3319,6 +3319,7 @@ int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info) struct pmbus_data *data; size_t groups_num = 0; int ret; + int i; char *name; if (!info) @@ -3352,6 +3353,11 @@ int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info) data->currpage = -1; data->currphase = -1; + for (i = 0; i < ARRAY_SIZE(data->vout_low); i++) { + data->vout_low[i] = -1; + data->vout_high[i] = -1; + } + ret = pmbus_init_common(client, data, info); if (ret < 0) return ret; From f233d2be38dbbb22299192292983037f01ab363c Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Tue, 30 Aug 2022 03:11:01 +0200 Subject: [PATCH 3/3] hwmon: (gpio-fan) Fix array out of bounds access The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end trace 8ded4c918658445b ]--- Fix this by checking the cooling state and return an error if it exceeds the maximum cooling state. Tested on a Raspberry Pi 3. Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks") Signed-off-by: Armin Wolf Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck --- drivers/hwmon/gpio-fan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index befe989ca7b9..fbf3f5a4ecb6 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -391,6 +391,9 @@ static int gpio_fan_set_cur_state(struct thermal_cooling_device *cdev, if (!fan_data) return -EINVAL; + if (state >= fan_data->num_speed) + return -EINVAL; + set_fan_speed(fan_data, state); return 0; }