ASoC: tlv320aic3x: add missing registers and bits

Adds register and bit shift definitions in header file.
Changes are for TLV320AIC310x based on data sheet.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Jiri Prchal 2012-07-04 08:12:50 +02:00 committed by Mark Brown
parent 2974d6b1aa
commit 784a897e23

View File

@ -13,7 +13,7 @@
#define _AIC3X_H
/* AIC3X register space */
#define AIC3X_CACHEREGNUM 103
#define AIC3X_CACHEREGNUM 110
/* Page select register */
#define AIC3X_PAGE_SELECT 0
@ -74,6 +74,8 @@
#define HPLCOM_CFG 37
/* Right High Power Output control registers */
#define HPRCOM_CFG 38
/* High Power Output Stage Control Register */
#define HPOUT_SC 40
/* DAC Output Switching control registers */
#define DAC_LINE_MUX 41
/* High Power Output Driver Pop Reduction registers */
@ -148,6 +150,17 @@
#define AIC3X_GPIOB_REG 101
/* Clock generation control register */
#define AIC3X_CLKGEN_CTRL_REG 102
/* New AGC registers */
#define LAGCN_ATTACK 103
#define LAGCN_DECAY 104
#define RAGCN_ATTACK 105
#define RAGCN_DECAY 106
/* New Programmable ADC Digital Path and I2C Bus Condition Register */
#define NEW_ADC_DIGITALPATH 107
/* Passive Analog Signal Bypass Selection During Powerdown Register */
#define PASSIVE_BYPASS 108
/* DAC Quiescent Current Adjustment Register */
#define DAC_ICC_ADJ 109
/* Page select register bits */
#define PAGE0_SELECT 0
@ -163,6 +176,10 @@
#define DUAL_RATE_MODE ((1 << 5) | (1 << 6))
#define LDAC2LCH (0x1 << 3)
#define RDAC2RCH (0x1 << 1)
#define LDAC2RCH (0x2 << 3)
#define RDAC2LCH (0x2 << 1)
#define LDAC2MONOMIX (0x3 << 3)
#define RDAC2MONOMIX (0x3 << 1)
/* PLL registers bitfields */
#define PLLP_SHIFT 0