Merge branch 'irqchip/aspeed' into irqchip/core
This commit is contained in:
Jason Cooper
commit
7a9243b950
@ -0,0 +1,22 @@
|
||||
Aspeed Vectored Interrupt Controller
|
||||
|
||||
These bindings are for the Aspeed AST2400 interrupt controller register layout.
|
||||
The SoC has an legacy register layout, but this driver does not support that
|
||||
mode of operation.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be "aspeed,ast2400-vic".
|
||||
|
||||
- interrupt-controller : Identifies the node as an interrupt controller
|
||||
- #interrupt-cells : Specifies the number of cells needed to encode an
|
||||
interrupt source. The value shall be 1.
|
||||
|
||||
Example:
|
||||
|
||||
vic: interrupt-controller@1e6c0080 {
|
||||
compatible = "aspeed,ast2400-vic";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x1e6c0080 0x80>;
|
||||
};
|
||||
@ -69,3 +69,4 @@ obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
|
||||
obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
|
||||
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
|
||||
obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
|
||||
obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o
|
||||
|
||||
230
drivers/irqchip/irq-aspeed-vic.c
Normal file
230
drivers/irqchip/irq-aspeed-vic.c
Normal file
@ -0,0 +1,230 @@
|
||||
/*
|
||||
* Copyright (C) 2015 - Ben Herrenschmidt, IBM Corp.
|
||||
*
|
||||
* Driver for Aspeed "new" VIC as found in SoC generation 3 and later
|
||||
*
|
||||
* Based on irq-vic.c:
|
||||
*
|
||||
* Copyright (C) 1999 - 2003 ARM Limited
|
||||
* Copyright (C) 2000 Deep Blue Solutions Ltd
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/export.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/irqchip.h>
|
||||
#include <linux/irqchip/chained_irq.h>
|
||||
#include <linux/irqdomain.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/syscore_ops.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <asm/exception.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
/* These definitions correspond to the "new mapping" of the
|
||||
* register set that interleaves "high" and "low". The offsets
|
||||
* below are for the "low" register, add 4 to get to the high one
|
||||
*/
|
||||
#define AVIC_IRQ_STATUS 0x00
|
||||
#define AVIC_FIQ_STATUS 0x08
|
||||
#define AVIC_RAW_STATUS 0x10
|
||||
#define AVIC_INT_SELECT 0x18
|
||||
#define AVIC_INT_ENABLE 0x20
|
||||
#define AVIC_INT_ENABLE_CLR 0x28
|
||||
#define AVIC_INT_TRIGGER 0x30
|
||||
#define AVIC_INT_TRIGGER_CLR 0x38
|
||||
#define AVIC_INT_SENSE 0x40
|
||||
#define AVIC_INT_DUAL_EDGE 0x48
|
||||
#define AVIC_INT_EVENT 0x50
|
||||
#define AVIC_EDGE_CLR 0x58
|
||||
#define AVIC_EDGE_STATUS 0x60
|
||||
|
||||
#define NUM_IRQS 64
|
||||
|
||||
struct aspeed_vic {
|
||||
void __iomem *base;
|
||||
u32 edge_sources[2];
|
||||
struct irq_domain *dom;
|
||||
};
|
||||
static struct aspeed_vic *system_avic;
|
||||
|
||||
static void vic_init_hw(struct aspeed_vic *vic)
|
||||
{
|
||||
u32 sense;
|
||||
|
||||
/* Disable all interrupts */
|
||||
writel(0xffffffff, vic->base + AVIC_INT_ENABLE_CLR);
|
||||
writel(0xffffffff, vic->base + AVIC_INT_ENABLE_CLR + 4);
|
||||
|
||||
/* Make sure no soft trigger is on */
|
||||
writel(0xffffffff, vic->base + AVIC_INT_TRIGGER_CLR);
|
||||
writel(0xffffffff, vic->base + AVIC_INT_TRIGGER_CLR + 4);
|
||||
|
||||
/* Set everything to be IRQ */
|
||||
writel(0, vic->base + AVIC_INT_SELECT);
|
||||
writel(0, vic->base + AVIC_INT_SELECT + 4);
|
||||
|
||||
/* Some interrupts have a programable high/low level trigger
|
||||
* (4 GPIO direct inputs), for now we assume this was configured
|
||||
* by firmware. We read which ones are edge now.
|
||||
*/
|
||||
sense = readl(vic->base + AVIC_INT_SENSE);
|
||||
vic->edge_sources[0] = ~sense;
|
||||
sense = readl(vic->base + AVIC_INT_SENSE + 4);
|
||||
vic->edge_sources[1] = ~sense;
|
||||
|
||||
/* Clear edge detection latches */
|
||||
writel(0xffffffff, vic->base + AVIC_EDGE_CLR);
|
||||
writel(0xffffffff, vic->base + AVIC_EDGE_CLR + 4);
|
||||
}
|
||||
|
||||
static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
|
||||
{
|
||||
struct aspeed_vic *vic = system_avic;
|
||||
u32 stat, irq;
|
||||
|
||||
for (;;) {
|
||||
irq = 0;
|
||||
stat = readl_relaxed(vic->base + AVIC_IRQ_STATUS);
|
||||
if (!stat) {
|
||||
stat = readl_relaxed(vic->base + AVIC_IRQ_STATUS + 4);
|
||||
irq = 32;
|
||||
}
|
||||
if (stat == 0)
|
||||
break;
|
||||
irq += ffs(stat) - 1;
|
||||
handle_domain_irq(vic->dom, irq, regs);
|
||||
}
|
||||
}
|
||||
|
||||
static void avic_ack_irq(struct irq_data *d)
|
||||
{
|
||||
struct aspeed_vic *vic = irq_data_get_irq_chip_data(d);
|
||||
unsigned int sidx = d->hwirq >> 5;
|
||||
unsigned int sbit = 1u << (d->hwirq & 0x1f);
|
||||
|
||||
/* Clear edge latch for edge interrupts, nop for level */
|
||||
if (vic->edge_sources[sidx] & sbit)
|
||||
writel(sbit, vic->base + AVIC_EDGE_CLR + sidx * 4);
|
||||
}
|
||||
|
||||
static void avic_mask_irq(struct irq_data *d)
|
||||
{
|
||||
struct aspeed_vic *vic = irq_data_get_irq_chip_data(d);
|
||||
unsigned int sidx = d->hwirq >> 5;
|
||||
unsigned int sbit = 1u << (d->hwirq & 0x1f);
|
||||
|
||||
writel(sbit, vic->base + AVIC_INT_ENABLE_CLR + sidx * 4);
|
||||
}
|
||||
|
||||
static void avic_unmask_irq(struct irq_data *d)
|
||||
{
|
||||
struct aspeed_vic *vic = irq_data_get_irq_chip_data(d);
|
||||
unsigned int sidx = d->hwirq >> 5;
|
||||
unsigned int sbit = 1u << (d->hwirq & 0x1f);
|
||||
|
||||
writel(sbit, vic->base + AVIC_INT_ENABLE + sidx * 4);
|
||||
}
|
||||
|
||||
/* For level irq, faster than going through a nop "ack" and mask */
|
||||
static void avic_mask_ack_irq(struct irq_data *d)
|
||||
{
|
||||
struct aspeed_vic *vic = irq_data_get_irq_chip_data(d);
|
||||
unsigned int sidx = d->hwirq >> 5;
|
||||
unsigned int sbit = 1u << (d->hwirq & 0x1f);
|
||||
|
||||
/* First mask */
|
||||
writel(sbit, vic->base + AVIC_INT_ENABLE_CLR + sidx * 4);
|
||||
|
||||
/* Then clear edge latch for edge interrupts */
|
||||
if (vic->edge_sources[sidx] & sbit)
|
||||
writel(sbit, vic->base + AVIC_EDGE_CLR + sidx * 4);
|
||||
}
|
||||
|
||||
static struct irq_chip avic_chip = {
|
||||
.name = "AVIC",
|
||||
.irq_ack = avic_ack_irq,
|
||||
.irq_mask = avic_mask_irq,
|
||||
.irq_unmask = avic_unmask_irq,
|
||||
.irq_mask_ack = avic_mask_ack_irq,
|
||||
};
|
||||
|
||||
static int avic_map(struct irq_domain *d, unsigned int irq,
|
||||
irq_hw_number_t hwirq)
|
||||
{
|
||||
struct aspeed_vic *vic = d->host_data;
|
||||
unsigned int sidx = hwirq >> 5;
|
||||
unsigned int sbit = 1u << (hwirq & 0x1f);
|
||||
|
||||
/* Check if interrupt exists */
|
||||
if (sidx > 1)
|
||||
return -EPERM;
|
||||
|
||||
if (vic->edge_sources[sidx] & sbit)
|
||||
irq_set_chip_and_handler(irq, &avic_chip, handle_edge_irq);
|
||||
else
|
||||
irq_set_chip_and_handler(irq, &avic_chip, handle_level_irq);
|
||||
irq_set_chip_data(irq, vic);
|
||||
irq_set_probe(irq);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irq_domain_ops avic_dom_ops = {
|
||||
.map = avic_map,
|
||||
.xlate = irq_domain_xlate_onetwocell,
|
||||
};
|
||||
|
||||
static int __init avic_of_init(struct device_node *node,
|
||||
struct device_node *parent)
|
||||
{
|
||||
void __iomem *regs;
|
||||
struct aspeed_vic *vic;
|
||||
|
||||
if (WARN(parent, "non-root Aspeed VIC not supported"))
|
||||
return -EINVAL;
|
||||
if (WARN(system_avic, "duplicate Aspeed VIC not supported"))
|
||||
return -EINVAL;
|
||||
|
||||
regs = of_iomap(node, 0);
|
||||
if (WARN_ON(!regs))
|
||||
return -EIO;
|
||||
|
||||
vic = kzalloc(sizeof(struct aspeed_vic), GFP_KERNEL);
|
||||
if (WARN_ON(!vic)) {
|
||||
iounmap(regs);
|
||||
return -ENOMEM;
|
||||
}
|
||||
vic->base = regs;
|
||||
|
||||
/* Initialize soures, all masked */
|
||||
vic_init_hw(vic);
|
||||
|
||||
/* Ready to receive interrupts */
|
||||
system_avic = vic;
|
||||
set_handle_irq(avic_handle_irq);
|
||||
|
||||
/* Register our domain */
|
||||
vic->dom = irq_domain_add_simple(node, NUM_IRQS, 0,
|
||||
&avic_dom_ops, vic);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
IRQCHIP_DECLARE(aspeed_new_vic, "aspeed,ast2400-vic", avic_of_init);
|
||||
Loading…
Reference in New Issue
Block a user