iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[MIPS] Implement clockevents for R4000-style cp0 count/compare interrupt

Browse Source 
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Ralf Baechle 2007-10-11 23:46:09 +01:00
parent 91a2fcc886
commit 7bcf7717b6
20 changed files with 210 additions and 200 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/mips/Kconfig
View File

@ -335,6 +335,7 @@ config QEMU
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
select I8259
select IRQ_CPU
select ISA
select PCSPEAKER
select SWAP_IO_SPACE
@ -667,6 +668,10 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
config GENERIC_CLOCKEVENTS
bool
default y
config GENERIC_TIME
bool
default y
@ -901,6 +906,8 @@ config BOOT_ELF64
menu "CPU selection"
source "kernel/time/Kconfig"
choice
prompt "CPU type"
default CPU_R4X00

2
arch/mips/au1000/common/irq.c
View File

@ -633,7 +633,7 @@ asmlinkage void plat_irq_dispatch(void)
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
if (pending & CAUSEF_IP7)
ll_timer_interrupt(63);
do_IRQ(63);
else if (pending & CAUSEF_IP2)
intc0_req0_irqdispatch();
else if (pending & CAUSEF_IP3)

1
arch/mips/configs/bigsur_defconfig
View File

@ -69,7 +69,6 @@ CONFIG_SIBYTE_SB1xxx_SOC=y
CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_SB1250_PROF is not set
# CONFIG_SIBYTE_TBPROF is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set

1
arch/mips/configs/sb1250-swarm_defconfig
View File

@ -70,7 +70,6 @@ CONFIG_SIBYTE_HAS_LDT=y
CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_SB1250_PROF is not set
# CONFIG_SIBYTE_TBPROF is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set

3
arch/mips/kernel/process.c
View File

@ -11,6 +11,7 @@
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/tick.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
@ -52,6 +53,7 @@ void __noreturn cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_stop_sched_tick();
while (!need_resched()) {
#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
extern void smtc_idle_loop_hook(void);
@ -61,6 +63,7 @@ void __noreturn cpu_idle(void)
if (cpu_wait)
(*cpu_wait)();
}
tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
schedule();
preempt_disable();

2
arch/mips/kernel/smp.c
View File

@ -38,6 +38,7 @@
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/smp.h>
#include <asm/time.h>
#ifdef CONFIG_MIPS_MT_SMTC
#include <asm/mipsmtregs.h>
@ -70,6 +71,7 @@ asmlinkage __cpuinit void start_secondary(void)
cpu_probe();
cpu_report();
per_cpu_trap_init();
mips_clockevent_init();
prom_init_secondary();
/*

2
arch/mips/kernel/smtc.c
View File

@ -867,7 +867,7 @@ void ipi_decode(struct smtc_ipi *pipi)
#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
clock_hang_reported[dest_copy] = 0;
#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
local_timer_interrupt(0);
local_timer_interrupt(0, NULL);
irq_exit();
break;
case LINUX_SMP_IPI:

256
arch/mips/kernel/time.c
View File

@ -11,6 +11,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/clockchips.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
@ -34,6 +35,8 @@
#include <asm/sections.h>
#include <asm/time.h>
#include <irq.h>
/*
* The integer part of the number of usecs per jiffy is taken from tick,
* but the fractional part is not recorded, so we calculate it using the
@ -70,10 +73,6 @@ int update_persistent_clock(struct timespec now)
/* how many counter cycles in a jiffy */
static unsigned long cycles_per_jiffy __read_mostly;
/* expirelo is the count value for next CPU timer interrupt */
static unsigned int expirelo;
/*
* Null timer ack for systems not needing one (e.g. i8254).
*/
@ -92,18 +91,7 @@ static cycle_t null_hpt_read(void)
*/
static void c0_timer_ack(void)
{
unsigned int count;
/* Ack this timer interrupt and set the next one. */
expirelo += cycles_per_jiffy;
write_c0_compare(expirelo);
/* Check to see if we have missed any timer interrupts. */
while (((count = read_c0_count()) - expirelo) < 0x7fffffff) {
/* missed_timer_count++; */
expirelo = count + cycles_per_jiffy;
write_c0_compare(expirelo);
}
write_c0_compare(read_c0_compare());
}
/*
@ -114,13 +102,6 @@ static cycle_t c0_hpt_read(void)
return read_c0_count();
}
/* For use both as a high precision timer and an interrupt source. */
static void __init c0_hpt_timer_init(void)
{
expirelo = read_c0_count() + cycles_per_jiffy;
write_c0_compare(expirelo);
}
int (*mips_timer_state)(void);
void (*mips_timer_ack)(void);
@ -140,35 +121,6 @@ void local_timer_interrupt(int irq, void *dev_id)
update_process_times(user_mode(get_irq_regs()));
}
/*
* High-level timer interrupt service routines. This function
* is set as irqaction->handler and is invoked through do_IRQ.
*/
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
write_seqlock(&xtime_lock);
mips_timer_ack();
/*
* call the generic timer interrupt handling
*/
do_timer(1);
write_sequnlock(&xtime_lock);
/*
* In UP mode, we call local_timer_interrupt() to do profiling
* and process accouting.
*
* In SMP mode, local_timer_interrupt() is invoked by appropriate
* low-level local timer interrupt handler.
*/
local_timer_interrupt(irq, dev_id);
return IRQ_HANDLED;
}
int null_perf_irq(void)
{
return 0;
@ -209,81 +161,6 @@ static inline int handle_perf_irq (int r2)
!r2;
}
void ll_timer_interrupt(int irq, void *dev_id)
{
int cpu = smp_processor_id();
#ifdef CONFIG_MIPS_MT_SMTC
/*
* In an SMTC system, one Count/Compare set exists per VPE.
* Which TC within a VPE gets the interrupt is essentially
* random - we only know that it shouldn't be one with
* IXMT set. Whichever TC gets the interrupt needs to
* send special interprocessor interrupts to the other
* TCs to make sure that they schedule, etc.
*
* That code is specific to the SMTC kernel, not to
* the a particular platform, so it's invoked from
* the general MIPS timer_interrupt routine.
*/
/*
* We could be here due to timer interrupt,
* perf counter overflow, or both.
*/
(void) handle_perf_irq(1);
if (read_c0_cause() & (1 << 30)) {
/*
* There are things we only want to do once per tick
* in an "MP" system. One TC of each VPE will take
* the actual timer interrupt. The others will get
* timer broadcast IPIs. We use whoever it is that takes
* the tick on VPE 0 to run the full timer_interrupt().
*/
if (cpu_data[cpu].vpe_id == 0) {
timer_interrupt(irq, NULL);
} else {
write_c0_compare(read_c0_count() +
(mips_hpt_frequency/HZ));
local_timer_interrupt(irq, dev_id);
}
smtc_timer_broadcast(cpu_data[cpu].vpe_id);
}
#else /* CONFIG_MIPS_MT_SMTC */
int r2 = cpu_has_mips_r2;
if (handle_perf_irq(r2))
return;
if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
return;
if (cpu == 0) {
/*
* CPU 0 handles the global timer interrupt job and process
* accounting resets count/compare registers to trigger next
* timer int.
*/
timer_interrupt(irq, NULL);
} else {
/* Everyone else needs to reset the timer int here as
ll_local_timer_interrupt doesn't */
/*
* FIXME: need to cope with counter underflow.
* More support needs to be added to kernel/time for
* counter/timer interrupts on multiple CPU's
*/
write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
/*
* Other CPUs should do profiling and process accounting
*/
local_timer_interrupt(irq, dev_id);
}
#endif /* CONFIG_MIPS_MT_SMTC */
}
/*
* time_init() - it does the following things.
*
@ -301,12 +178,6 @@ void ll_timer_interrupt(int irq, void *dev_id)
unsigned int mips_hpt_frequency;
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "timer",
};
static unsigned int __init calibrate_hpt(void)
{
cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
@ -355,6 +226,65 @@ struct clocksource clocksource_mips = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int mips_next_event(unsigned long delta,
struct clock_event_device *evt)
{
unsigned int cnt;
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
return ((long)(read_c0_count() - cnt ) > 0) ? -ETIME : 0;
}
static void mips_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
/* Nothing to do ... */
}
struct clock_event_device mips_clockevent;
static struct clock_event_device *global_cd[NR_CPUS];
static int cp0_timer_irq_installed;
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
const int r2 = cpu_has_mips_r2;
struct clock_event_device *cd;
int cpu = smp_processor_id();
/*
* Suckage alert:
* Before R2 of the architecture there was no way to see if a
* performance counter interrupt was pending, so we have to run
* the performance counter interrupt handler anyway.
*/
if (handle_perf_irq(r2))
goto out;
/*
* The same applies to performance counter interrupts. But with the
* above we now know that the reason we got here must be a timer
* interrupt. Being the paranoiacs we are we check anyway.
*/
if (!r2 || (read_c0_cause() & (1 << 30))) {
c0_timer_ack();
cd = global_cd[cpu];
cd->event_handler(cd);
}
out:
return IRQ_HANDLED;
}
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "timer",
};
static void __init init_mips_clocksource(void)
{
u64 temp;
@ -382,6 +312,56 @@ void __init __weak plat_time_init(void)
{
}
void __init __weak plat_timer_setup(struct irqaction *irq)
{
}
void __cpuinit mips_clockevent_init(void)
{
uint64_t mips_freq = mips_hpt_frequency;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
unsigned int irq = MIPS_CPU_IRQ_BASE + 7;
if (!cpu_has_counter)
return;
if (cpu == 0)
cd = &mips_clockevent;
else
cd = kzalloc(sizeof(*cd), GFP_ATOMIC);
if (!cd)
return; /* We're probably roadkill ... */
cd->name = "MIPS";
cd->features = CLOCK_EVT_FEAT_ONESHOT;
/* Calculate the min / max delta */
cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
cd->shift = 32;
cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x30, cd);
cd->rating = 300;
cd->irq = irq;
cd->cpumask = cpumask_of_cpu(cpu);
cd->set_next_event = mips_next_event;
cd->set_mode = mips_set_mode;
global_cd[cpu] = cd;
clockevents_register_device(cd);
if (!cp0_timer_irq_installed) {
#ifdef CONFIG_MIPS_MT_SMTC
#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
setup_irq_smtc(irq, &timer_irqaction, CPUCTR_IMASKBIT);
#else
setup_irq(irq, &timer_irqaction);
#endif /* CONFIG_MIPS_MT_SMTC */
cp0_timer_irq_installed = 1;
}
}
void __init time_init(void)
{
plat_time_init();
@ -407,11 +387,6 @@ void __init time_init(void)
/* Calculate cache parameters. */
cycles_per_jiffy =
(mips_hpt_frequency + HZ / 2) / HZ;
/*
* This sets up the high precision
* timer for the first interrupt.
*/
c0_hpt_timer_init();
}
}
if (!mips_hpt_frequency)
@ -421,6 +396,10 @@ void __init time_init(void)
printk("Using %u.%03u MHz high precision timer.\n",
((mips_hpt_frequency + 500) / 1000) / 1000,
((mips_hpt_frequency + 500) / 1000) % 1000);
#ifdef CONFIG_IRQ_CPU
setup_irq(MIPS_CPU_IRQ_BASE + 7, &timer_irqaction);
#endif
}
if (!mips_timer_ack)
@ -441,4 +420,5 @@ void __init time_init(void)
plat_timer_setup(&timer_irqaction);
init_mips_clocksource();
mips_clockevent_init();
}

26
arch/mips/mips-boards/generic/time.c
View File

@ -144,20 +144,20 @@ void __init plat_time_init(void)
mips_scroll_message();
}
static irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
{
return perf_irq();
}
//static irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
//{
// return perf_irq();
//}
static struct irqaction perf_irqaction = {
.handler = mips_perf_interrupt,
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "performance",
};
//static struct irqaction perf_irqaction = {
// .handler = mips_perf_interrupt,
// .flags = IRQF_DISABLED | IRQF_PERCPU,
// .name = "performance",
//};
void __init plat_perf_setup(void)
{
struct irqaction *irq = &perf_irqaction;
// struct irqaction *irq = &perf_irqaction;
cp0_perfcount_irq = -1;
@ -170,12 +170,6 @@ void __init plat_perf_setup(void)
if (cp0_perfcount_irq >= 0) {
if (cpu_has_vint)
set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc(cp0_perfcount_irq, irq,
0x100 << cp0_perfcount_irq);
#else
setup_irq(cp0_perfcount_irq, irq);
#endif /* CONFIG_MIPS_MT_SMTC */
#ifdef CONFIG_SMP
set_irq_handler(cp0_perfcount_irq, handle_percpu_irq);
#endif

4
arch/mips/qemu/q-irq.c
View File

@ -2,6 +2,7 @@
#include <linux/linkage.h>
#include <asm/i8259.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/qemu.h>
#include <asm/system.h>
@ -12,7 +13,7 @@ asmlinkage void plat_irq_dispatch(void)
unsigned int pending = read_c0_status() & read_c0_cause();
if (pending & 0x8000) {
ll_timer_interrupt(Q_COUNT_COMPARE_IRQ);
do_IRQ(Q_COUNT_COMPARE_IRQ);
return;
}
if (pending & 0x0400) {
@ -29,6 +30,7 @@ void __init arch_init_irq(void)
{
mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK; /* 100MHz */
mips_cpu_irq_init();
init_i8259_irqs();
set_c0_status(0x8400);
}

1
arch/mips/qemu/q-setup.c
View File

@ -17,7 +17,6 @@ void __init plat_timer_setup(struct irqaction *irq)
outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */
outb_p(LATCH & 0xff , 0x40); /* LSB */
outb(LATCH >> 8 , 0x40); /* MSB */
setup_irq(0, irq);
}
void __init plat_mem_setup(void)

2
arch/mips/sgi-ip22/ip22-int.c
View File

@ -242,7 +242,7 @@ asmlinkage void plat_irq_dispatch(void)
* First we check for r4k counter/timer IRQ.
*/
if (pending & CAUSEF_IP7)
ll_timer_interrupt(SGI_TIMER_IRQ, NULL);
do_IRQ(SGI_TIMER_IRQ);
else if (pending & CAUSEF_IP2)
indy_local0_irqdispatch();
else if (pending & CAUSEF_IP3)

2
arch/mips/sgi-ip32/ip32-irq.c
View File

@ -457,7 +457,7 @@ static void ip32_irq4(void)
static void ip32_irq5(void)
{
ll_timer_interrupt(IP32_R4K_TIMER_IRQ);
do_IRQ(IP32_R4K_TIMER_IRQ);
}
asmlinkage void plat_irq_dispatch(void)

12
arch/mips/sibyte/Kconfig
View File

@ -1,6 +1,7 @@
config SIBYTE_SB1250
bool
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_ENABLE_LDT_IF_PCI
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
@ -8,6 +9,7 @@ config SIBYTE_SB1250
config SIBYTE_BCM1120
bool
select IRQ_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
@ -15,6 +17,7 @@ config SIBYTE_BCM1120
config SIBYTE_BCM1125
bool
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
@ -22,6 +25,7 @@ config SIBYTE_BCM1125
config SIBYTE_BCM1125H
bool
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
select SIBYTE_ENABLE_LDT_IF_PCI
select SIBYTE_HAS_ZBUS_PROFILING
@ -29,12 +33,14 @@ config SIBYTE_BCM1125H
config SIBYTE_BCM112X
bool
select IRQ_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_BCM1x80
bool
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
select SYS_SUPPORTS_SMP
@ -42,6 +48,7 @@ config SIBYTE_BCM1x80
config SIBYTE_BCM1x55
bool
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
select SYS_SUPPORTS_SMP
@ -49,6 +56,7 @@ config SIBYTE_BCM1x55
config SIBYTE_SB1xxx_SOC
bool
select DMA_COHERENT
select IRQ_CPU
select SIBYTE_CFE
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
@ -166,10 +174,6 @@ config SIBYTE_BW_TRACE
buffer activity. Raw buffer data is dumped to console, and
must be processed off-line.
config SIBYTE_SB1250_PROF
bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
depends on SIBYTE_SB1xxx_SOC
config SIBYTE_TBPROF
tristate "Support for ZBbus profiling"
depends on SIBYTE_HAS_ZBUS_PROFILING

13
arch/mips/sibyte/bcm1480/irq.c
View File

@ -450,7 +450,6 @@ static void bcm1480_kgdb_interrupt(void)
#endif /* CONFIG_KGDB */
extern void bcm1480_timer_interrupt(void);
extern void bcm1480_mailbox_interrupt(void);
asmlinkage void plat_irq_dispatch(void)
@ -470,8 +469,16 @@ asmlinkage void plat_irq_dispatch(void)
else
#endif
if (pending & CAUSEF_IP4)
bcm1480_timer_interrupt();
if (pending & CAUSEF_IP4) {
int cpu = smp_processor_id();
int irq = K_BCM1480_INT_TIMER_0 + cpu;
/* Reset the timer */
__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
do_IRQ(irq);
}
#ifdef CONFIG_SMP
else if (pending & CAUSEF_IP3)

50
arch/mips/sibyte/sb1250/irq.c
View File

@ -28,6 +28,7 @@
#include <asm/errno.h>
#include <asm/signal.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/sibyte/sb1250_regs.h>
@ -399,18 +400,45 @@ static void sb1250_kgdb_interrupt(void)
#endif /* CONFIG_KGDB */
extern void sb1250_timer_interrupt(void);
static inline void sb1250_timer_interrupt(void)
{
int cpu = smp_processor_id();
int irq = K_INT_TIMER_0 + cpu;
irq_enter();
kstat_this_cpu.irqs[irq]++;
write_seqlock(&xtime_lock);
/* ACK interrupt */
____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
/*
* call the generic timer interrupt handling
*/
do_timer(1);
write_sequnlock(&xtime_lock);
/*
* In UP mode, we call local_timer_interrupt() to do profiling
* and process accouting.
*
* In SMP mode, local_timer_interrupt() is invoked by appropriate
* low-level local timer interrupt handler.
*/
local_timer_interrupt(irq);
irq_exit();
}
extern void sb1250_mailbox_interrupt(void);
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending;
#ifdef CONFIG_SIBYTE_SB1250_PROF
/* Set compare to count to silence count/compare timer interrupts */
write_c0_compare(read_c0_count());
#endif
/*
* What a pain. We have to be really careful saving the upper 32 bits
* of any * register across function calls if we don't want them
@ -423,13 +451,9 @@ asmlinkage void plat_irq_dispatch(void)
pending = read_c0_cause() & read_c0_status() & ST0_IM;
#ifdef CONFIG_SIBYTE_SB1250_PROF
if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
sbprof_cpu_intr();
else
#endif
if (pending & CAUSEF_IP4)
if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
do_IRQ(MIPS_CPU_IRQ_BASE + 7);
else if (pending & CAUSEF_IP4)
sb1250_timer_interrupt();
#ifdef CONFIG_SMP

12
arch/mips/sibyte/sb1250/time.c
View File

@ -116,18 +116,6 @@ void sb1250_time_init(void)
*/
}
void sb1250_timer_interrupt(void)
{
int cpu = smp_processor_id();
int irq = K_INT_TIMER_0 + cpu;
/* ACK interrupt */
____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
ll_timer_interrupt(irq);
}
/*
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
* again.

2
include/asm-mips/mach-ip27/irq.h
View File

@ -17,4 +17,6 @@
*/
#define NR_IRQS 256
#include_next <irq.h>
#endif /* __ASM_MACH_IP27_IRQ_H */

2
include/asm-mips/qemu.h
View File

@ -12,7 +12,7 @@
* Interrupt numbers
*/
#define Q_PIC_IRQ_BASE 0
#define Q_COUNT_COMPARE_IRQ 16
#define Q_COUNT_COMPARE_IRQ 23
/*
* Qemu clock rate. Unlike on real MIPS this has no relation to the

10
include/asm-mips/time.h
View File

@ -48,11 +48,6 @@ extern void (*mips_timer_ack)(void);
*/
extern struct clocksource clocksource_mips;
/*
* The low-level timer interrupt routine.
*/
extern void ll_timer_interrupt(int irq, void *dev_id);
/*
* profiling and process accouting is done separately in local_timer_interrupt
*/
@ -78,4 +73,9 @@ extern unsigned int mips_hpt_frequency;
*/
extern int (*perf_irq)(void);
/*
* Initialize the calling CPU's compare interrupt as clockevent device
*/
extern void mips_clockevent_init(void);
#endif /* _ASM_TIME_H */