From 7d7bf30f031b8e2474eefe64230609b45030bd3d Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Thu, 1 Feb 2024 21:42:03 +0100 Subject: [PATCH] net: micrel: Fix the frequency adjustments By default lan8841's 1588 clock frequency is 125MHz. But when adjusting the frequency, it is using the 1PPM format of the lan8814. Which is the wrong format as lan8814 has a 1588 clock frequency of 250MHz. So then for each 1PPM adjustment would adjust less than expected. Therefore fix this by using the correct 1PPM format for lan8841. Signed-off-by: Horatiu Vultur Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 40bea9293ddd..9b6973581989 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -120,6 +120,12 @@ */ #define LAN8814_1PPM_FORMAT 17179 +/* Represents 1ppm adjustment in 2^32 format with + * each nsec contains 8 clock cycles. + * The value is calculated as following: (1/1000000)/((2^-32)/8) + */ +#define LAN8841_1PPM_FORMAT 34360 + #define PTP_RX_VERSION 0x0248 #define PTP_TX_VERSION 0x0288 #define PTP_MAX_VERSION(x) (((x) & GENMASK(7, 0)) << 8) @@ -4115,8 +4121,8 @@ static int lan8841_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) faster = false; } - rate = LAN8814_1PPM_FORMAT * (upper_16_bits(scaled_ppm)); - rate += (LAN8814_1PPM_FORMAT * (lower_16_bits(scaled_ppm))) >> 16; + rate = LAN8841_1PPM_FORMAT * (upper_16_bits(scaled_ppm)); + rate += (LAN8841_1PPM_FORMAT * (lower_16_bits(scaled_ppm))) >> 16; mutex_lock(&ptp_priv->ptp_lock); phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_RATE_ADJ_HI,