ARM: omap1: move mach/*.h into mach directory

Most of the header files are no longer referenced from outside
arch/arm/mach-omap1, so move them all to that place directly
and change their users to use the new location.

The exceptions are:

- mach/compress.h is used by the core architecture code
- mach/serial.h is used by mach/compress.h

The mach/memory.h is empty and gets removed in the process,
avoiding the need for CONFIG_NEED_MACH_MEMORY_H.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -492,7 +492,6 @@ config ARCH_OMAP1
 	select GPIOLIB
 	select HAVE_LEGACY_CLK
 	select IRQ_DOMAIN
-	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)

arch/arm/mach-omap1/ams-delta-fiq-handler.S

@@ -13,14 +13,15 @@
 #include <linux/linkage.h>
 #include <linux/platform_data/ams-delta-fiq.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/assembler.h>
 #include <asm/irq.h>
 
+#include "hardware.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 #include "iomap.h"
-#include "soc.h"
 
 /*
  * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c.

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -21,7 +21,9 @@
 #include <linux/platform_device.h>
 
 #include <asm/fiq.h>
+#include <linux/soc/ti/omap1-io.h>
 
+#include "hardware.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 

arch/arm/mach-omap1/ams-delta-fiq.h

@@ -16,7 +16,7 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 /*
  * Interrupt number used for passing control from FIQ to IRQ.

arch/arm/mach-omap1/board-ams-delta.c

@@ -36,11 +36,9 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_data/keypad-omap.h>
-#include <mach/mux.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include "usb.h"
-
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 #include "iomap.h"

arch/arm/mach-omap1/board-fsample.c

@@ -23,13 +23,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <linux/soc/ti/omap1-io.h>
-#include <mach/mux.h>
-#include "flash.h"
 #include <linux/platform_data/keypad-omap.h>
+#include "tc.h"
 
-#include <mach/hardware.h>
+#include "mux.h"
-
+#include "flash.h"
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 #include "fpga.h"

arch/arm/mach-omap1/board-generic.c

@@ -14,15 +14,13 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
+#include "hardware.h"
-
+#include "mux.h"
 #include "usb.h"
-
 #include "common.h"
 
 /* assume no Mini-AB port */

arch/arm/mach-omap1/board-h2.c

@@ -28,22 +28,20 @@
 #include <linux/mfd/tps65010.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/omap-dma.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <linux/leds.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
+#include "tc.h"
-#include <linux/omap-dma.h>
+#include "mux.h"
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
 #include "flash.h"
-
+#include "hardware.h"
-#include <mach/hardware.h>
 #include "usb.h"
-
 #include "common.h"
 #include "board-h2.h"
 

arch/arm/mach-omap1/board-h3.c

@@ -29,6 +29,8 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
 #include <linux/leds.h>
 
 #include <asm/setup.h>
@@ -37,16 +39,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
+#include "tc.h"
-#include <mach/tc.h>
+#include "mux.h"
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/omap-dma.h>
 #include "flash.h"
-
+#include "hardware.h"
-#include <mach/hardware.h>
+#include "irqs.h"
-#include <mach/irqs.h>
 #include "usb.h"
-
 #include "common.h"
 #include "board-h3.h"
 

arch/arm/mach-omap1/board-htcherald.c

@@ -23,16 +23,16 @@
 #include <linux/spi/ads7846.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/omap7xx.h>
+#include "hardware.h"
+#include "omap7xx.h"
 #include "mmc.h"
-
+#include "irqs.h"
-#include <mach/irqs.h>
 #include "usb.h"
-
 #include "common.h"
 
 /* LCD register definition */

arch/arm/mach-omap1/board-innovator.c

@@ -23,19 +23,17 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
+#include "tc.h"
+#include "mux.h"
 #include "flash.h"
-#include <mach/tc.h>
+#include "hardware.h"
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
 #include "usb.h"
-
 #include "iomap.h"
 #include "common.h"
 #include "mmc.h"

arch/arm/mach-omap1/board-nokia770.c

@@ -28,11 +28,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
+#include "mux.h"
-
+#include "hardware.h"
-#include <mach/hardware.h>
 #include "usb.h"
-
 #include "common.h"
 #include "clock.h"
 #include "mmc.h"

arch/arm/mach-omap1/board-osk.c

@@ -42,18 +42,17 @@
 #include <linux/mfd/tps65010.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
+#include "mux.h"
-#include <mach/tc.h>
+#include "hardware.h"
-
-#include <mach/hardware.h>
 #include "usb.h"
-
 #include "common.h"
 
 /* Name of the GPIO chip used by the OMAP for GPIOs 0..15 */

arch/arm/mach-omap1/board-palmte.c

@@ -25,21 +25,19 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
+#include <linux/omap-dma.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
+#include "mux.h"
-#include <mach/tc.h>
+#include "hardware.h"
-#include <linux/omap-dma.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
 #include "usb.h"
-
 #include "mmc.h"
 #include "common.h"
 

arch/arm/mach-omap1/board-palmtt.c

@@ -24,22 +24,20 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/omap-dma.h>
 #include <linux/platform_data/omap1_bl.h>
 #include <linux/platform_data/leds-omap.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
+#include "mux.h"
-#include <linux/omap-dma.h>
+#include "hardware.h"
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
 #include "usb.h"
-
 #include "common.h"
 
 #define PALMTT_USBDETECT_GPIO	0

arch/arm/mach-omap1/board-palmz71.c

@@ -28,20 +28,18 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
+#include "mux.h"
-#include <linux/omap-dma.h>
+#include "hardware.h"
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
 #include "usb.h"
-
 #include "common.h"
 
 #define PALMZ71_USBDETECT_GPIO	0

arch/arm/mach-omap1/board-perseus2.c

@@ -19,17 +19,16 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include "tc.h"
-#include <mach/mux.h>
+#include "mux.h"
 #include "flash.h"
-
+#include "hardware.h"
-#include <mach/hardware.h>
-
 #include "iomap.h"
 #include "common.h"
 #include "fpga.h"

arch/arm/mach-omap1/board-sx1-mmc.c

@@ -12,9 +12,8 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include "board-sx1.h"
-
 #include "mmc.h"
 
 #if IS_ENABLED(CONFIG_MMC_OMAP)

arch/arm/mach-omap1/board-sx1.c

@@ -26,20 +26,18 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
+#include "tc.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "flash.h"
-#include <mach/mux.h>
+#include "mux.h"
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
 #include "board-sx1.h"
-
+#include "hardware.h"
-#include <mach/hardware.h>
 #include "usb.h"
-
 #include "common.h"
 
 /* Write to I2C device */

arch/arm/mach-omap1/clock.c

@@ -16,11 +16,11 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
-
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"

arch/arm/mach-omap1/clock_data.c

@@ -16,14 +16,13 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
 #include "soc.h"
-
+#include "hardware.h"
-#include <mach/hardware.h>
 #include "usb.h"   /* for OTG_BASE */
-
 #include "iomap.h"
 #include "clock.h"
 #include "sram.h"

arch/arm/mach-omap1/common.h

@@ -31,8 +31,7 @@
 
 #include <asm/exception.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
-
 #include "soc.h"
 #include "i2c.h"
 

arch/arm/mach-omap1/devices.c

@@ -14,15 +14,15 @@
 #include <linux/spi/spi.h>
 
 #include <linux/platform_data/omap-wd-timer.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include "tc.h"
-#include <mach/mux.h>
+#include "mux.h"
-
-#include <mach/omap7xx.h>
-#include <mach/hardware.h>
 
+#include "omap7xx.h"
+#include "hardware.h"
 #include "common.h"
 #include "clock.h"
 #include "mmc.h"

arch/arm/mach-omap1/dma.c

@@ -24,7 +24,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/omap-dma.h>
-#include <mach/tc.h>
+#include "tc.h"
 
 #include "soc.h"
 

arch/arm/mach-omap1/fb.c

@@ -21,7 +21,7 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #if IS_ENABLED(CONFIG_FB_OMAP)
 

arch/arm/mach-omap1/flash.c

@@ -6,11 +6,12 @@
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
+#include <linux/soc/ti/omap1-io.h>
+
+#include "tc.h"
 
-#include <mach/tc.h>
 #include "flash.h"
 
-#include <mach/hardware.h>
 
 void omap1_set_vpp(struct platform_device *pdev, int enable)
 {

arch/arm/mach-omap1/fpga.c

@@ -24,8 +24,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
-
 #include "iomap.h"
 #include "common.h"
 #include "fpga.h"

arch/arm/mach-omap1/gpio15xx.c

@@ -18,8 +18,9 @@
 
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-soc.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 #define OMAP1510_GPIO_BASE		0xFFFCE000

arch/arm/mach-omap1/gpio16xx.c

@@ -18,9 +18,10 @@
 
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/irqs.h>
+#include "hardware.h"
-
+#include "irqs.h"
 #include "soc.h"
 
 #define OMAP1610_GPIO1_BASE		0xfffbe400

arch/arm/mach-omap1/gpio7xx.c

@@ -19,8 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
-
 #include "soc.h"
 
 #define OMAP7XX_GPIO1_BASE		0xfffbc000

arch/arm/mach-omap1/hardware.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-omap1/include/mach/hardware.h
- *
  * Hardware definitions for TI OMAP processors and boards
  *
  * NOTE: Please put device driver specific defines into a separate header
@@ -42,7 +40,7 @@
 #include <asm/types.h>
 #include <linux/soc/ti/omap1-soc.h>
 
-#include <mach/tc.h>
+#include "tc.h"
 
 /* Almost all documentation for chip and board memory maps assumes
  * BM is clear.  Most devel boards have a switch to control booting

arch/arm/mach-omap1/i2c.c

@@ -7,7 +7,8 @@
 
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-omap.h>
-#include <mach/mux.h>
+
+#include "mux.h"
 #include "soc.h"
 
 #define OMAP_I2C_SIZE		0x3f

arch/arm/mach-omap1/id.c

@@ -12,12 +12,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
 #include <asm/system_info.h>
 
 #include "soc.h"
-
+#include "hardware.h"
-#include <mach/hardware.h>
-
 #include "common.h"
 
 #define OMAP_DIE_ID_0		0xfffe1800

arch/arm/mach-omap1/include/mach/memory.h

@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-omap1/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* REVISIT: omap1 legacy drivers still rely on this */
-#include <mach/hardware.h>
-
-#endif

arch/arm/mach-omap1/io.c

@@ -9,14 +9,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/omap-dma.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
+#include "tc.h"
-#include <mach/tc.h>
+#include "mux.h"
-#include <linux/omap-dma.h>
-
 #include "iomap.h"
 #include "common.h"
 #include "clock.h"

arch/arm/mach-omap1/irq.c

@@ -47,9 +47,7 @@
 #include <asm/mach/irq.h>
 
 #include "soc.h"
-
+#include "hardware.h"
-#include <mach/hardware.h>
-
 #include "common.h"
 
 #define IRQ_BANK(irq) ((irq) >> 5)

arch/arm/mach-omap1/irqs.h

@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- *  arch/arm/plat-omap/include/mach/irqs.h
- *
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
  *

arch/arm/mach-omap1/mcbsp.c

@@ -15,14 +15,13 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-
 #include <linux/omap-dma.h>
-#include <mach/mux.h>
+#include <linux/soc/ti/omap1-io.h>
-#include "soc.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
-#include <mach/irqs.h>
+#include "mux.h"
-
+#include "soc.h"
+#include "irqs.h"
 #include "iomap.h"
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)

arch/arm/mach-omap1/mtd-xip.h

@@ -14,7 +14,8 @@
 #ifndef __ARCH_OMAP_MTD_XIP_H__
 #define __ARCH_OMAP_MTD_XIP_H__
 
-#include <mach/hardware.h>
+#include "hardware.h"
+#include <linux/soc/ti/omap1-io.h>
 #define OMAP_MPU_TIMER_BASE	(0xfffec500)
 #define OMAP_MPU_TIMER_OFFSET	0x100
 

arch/arm/mach-omap1/mux.c

@@ -12,10 +12,10 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
-
+#include "mux.h"
-#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 

arch/arm/mach-omap1/mux.h

@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * arch/arm/plat-omap/include/mach/mux.h
- *
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
  *

arch/arm/mach-omap1/ocpi.c

@@ -20,9 +20,9 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
-
 #include "common.h"
 
 #define OCPI_BASE		0xfffec320

arch/arm/mach-omap1/omap-dma.c

@@ -34,10 +34,11 @@
 
 #include <linux/omap-dma.h>
 
-#include <mach/hardware.h>
 #include <linux/soc/ti/omap1-io.h>
 #include <linux/soc/ti/omap1-soc.h>
 
+#include "tc.h"
+
 /*
  * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
  * channels that an instance of the SDMA IP block can support.  Used

arch/arm/mach-omap1/pm.c

@@ -52,13 +52,14 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/tc.h>
+#include <linux/soc/ti/omap1-io.h>
-#include <mach/mux.h>
+#include "tc.h"
 #include <linux/omap-dma.h>
 #include <clocksource/timer-ti-dm.h>
 
-#include <mach/irqs.h>
+#include "hardware.h"
-
+#include "mux.h"
+#include "irqs.h"
 #include "iomap.h"
 #include "clock.h"
 #include "pm.h"

arch/arm/mach-omap1/pm.h

@@ -34,6 +34,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_PM_H
 #define __ARCH_ARM_MACH_OMAP1_PM_H
 
+#include <linux/soc/ti/omap1-io.h>
+
 /*
  * ----------------------------------------------------------------------------
  * Register and offset definitions to be used in PM assembler code

arch/arm/mach-omap1/reset.c

@@ -6,8 +6,7 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
-
 #include "iomap.h"
 #include "common.h"
 

arch/arm/mach-omap1/serial.c

@@ -19,8 +19,9 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
+#include <mach/serial.h>
 
+#include "mux.h"
 #include "pm.h"
 #include "soc.h"
 

arch/arm/mach-omap1/sleep.S

@@ -36,7 +36,7 @@
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #include "iomap.h"
 #include "pm.h"

arch/arm/mach-omap1/soc.h

@@ -1,6 +1,6 @@
 /*
  * We can move linux/soc/ti/omap1-soc.h here once the drivers are fixed
  */
-#include <mach/hardware.h>
+#include "hardware.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <asm/irq.h>

arch/arm/mach-omap1/sram.S

@@ -6,11 +6,11 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
-
 #include "iomap.h"
 
 	.text

arch/arm/mach-omap1/tc.h

@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * arch/arm/plat-omap/include/mach/tc.h
- *
  * OMAP Traffic Controller
  *
  * Copyright (C) 2004 Nokia Corporation

arch/arm/mach-omap1/time.c

@@ -47,10 +47,10 @@
 
 #include <asm/irq.h>
 
-#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 

arch/arm/mach-omap1/timer.c

@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <clocksource/timer-ti-dm.h>
 

arch/arm/mach-omap1/timer32k.c

@@ -51,7 +51,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include "common.h"
 
 /*

arch/arm/mach-omap1/usb.c

@@ -12,13 +12,13 @@
 #include <linux/dma-map-ops.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/irq.h>
 
-#include <mach/mux.h>
+#include "hardware.h"
-
+#include "mux.h"
 #include "usb.h"
-
 #include "common.h"
 
 /* These routines should handle the standard chip-specific modes

arch/arm/plat-omap/include/plat/cpu.h

@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Copyright (C) 2009-11 Texas Instruments.
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-#ifdef CONFIG_ARCH_OMAP1
-#include <mach/soc.h>
-#endif
-
-#endif