diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt deleted file mode 100644 index bfda6af76bee..000000000000 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ /dev/null @@ -1,126 +0,0 @@ -Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator. - -Reference -[1] Si5351A/B/C Data Sheet - https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf - -The Si5351a/b/c are programmable i2c clock generators with up to 8 output -clocks. Si5351a also has a reduced pin-count package (MSOP10) where only -3 output clocks are accessible. The internal structure of the clock -generators can be found in [1]. - -==I2C device node== - -Required properties: -- compatible: shall be one of the following: - "silabs,si5351a" - Si5351a, QFN20 package - "silabs,si5351a-msop" - Si5351a, MSOP10 package - "silabs,si5351b" - Si5351b, QFN20 package - "silabs,si5351c" - Si5351c, QFN20 package -- reg: i2c device address, shall be 0x60 or 0x61. -- #clock-cells: from common clock binding; shall be set to 1. -- clocks: from common clock binding; list of parent clock - handles, shall be xtal reference clock or xtal and clkin for - si5351c only. Corresponding clock input names are "xtal" and - "clkin" respectively. -- #address-cells: shall be set to 1. -- #size-cells: shall be set to 0. - -Optional properties: -- silabs,pll-source: pair of (number, source) for each pll. Allows - to overwrite clock source of pll A (number=0) or B (number=1). - -==Child nodes== - -Each of the clock outputs can be overwritten individually by -using a child node to the I2C device node. If a child node for a clock -output is not set, the eeprom configuration is not overwritten. - -Required child node properties: -- reg: number of clock output. - -Optional child node properties: -- silabs,clock-source: source clock of the output divider stage N, shall be - 0 = multisynth N - 1 = multisynth 0 for output clocks 0-3, else multisynth4 - 2 = xtal - 3 = clkin (si5351c only) -- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}. -- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth - divider. -- silabs,pll-master: boolean, multisynth can change pll frequency. -- silabs,pll-reset: boolean, clock output can reset its pll. -- silabs,disable-state : clock output disable state, shall be - 0 = clock output is driven LOW when disabled - 1 = clock output is driven HIGH when disabled - 2 = clock output is FLOATING (HIGH-Z) when disabled - 3 = clock output is NEVER disabled - -==Example== - -/* 25MHz reference crystal */ -ref25: ref25M { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; -}; - -i2c-master-node { - - /* Si5351a msop10 i2c clock generator */ - si5351a: clock-generator@60 { - compatible = "silabs,si5351a-msop"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - - /* connect xtal input to 25MHz reference */ - clocks = <&ref25>; - clock-names = "xtal"; - - /* connect xtal input as source of pll0 and pll1 */ - silabs,pll-source = <0 0>, <1 0>; - - /* - * overwrite clkout0 configuration with: - * - 8mA output drive strength - * - pll0 as clock source of multisynth0 - * - multisynth0 as clock source of output divider - * - multisynth0 can change pll0 - * - set initial clock frequency of 74.25MHz - */ - clkout0 { - reg = <0>; - silabs,drive-strength = <8>; - silabs,multisynth-source = <0>; - silabs,clock-source = <0>; - silabs,pll-master; - clock-frequency = <74250000>; - }; - - /* - * overwrite clkout1 configuration with: - * - 4mA output drive strength - * - pll1 as clock source of multisynth1 - * - multisynth1 as clock source of output divider - * - multisynth1 can change pll1 - */ - clkout1 { - reg = <1>; - silabs,drive-strength = <4>; - silabs,multisynth-source = <1>; - silabs,clock-source = <0>; - pll-master; - }; - - /* - * overwrite clkout2 configuration with: - * - xtal as clock source of output divider - */ - clkout2 { - reg = <2>; - silabs,clock-source = <2>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.yaml b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml new file mode 100644 index 000000000000..d3e0ec29993b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml @@ -0,0 +1,265 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/silabs,si5351.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Labs Si5351A/B/C programmable I2C clock generators + +description: | + The Silicon Labs Si5351A/B/C are programmable I2C clock generators with up to + 8 outputs. Si5351A also has a reduced pin-count package (10-MSOP) where only 3 + output clocks are accessible. The internal structure of the clock generators + can be found in [1]. + + [1] Si5351A/B/C Data Sheet + https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf + +maintainers: + - Alvin Šipraga + +properties: + compatible: + enum: + - silabs,si5351a # Si5351A, 20-QFN package + - silabs,si5351a-msop # Si5351A, 10-MSOP package + - silabs,si5351b # Si5351B, 20-QFN package + - silabs,si5351c # Si5351C, 20-QFN package + + reg: + enum: + - 0x60 + - 0x61 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#clock-cells": + const: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: xtal + - const: clkin + + silabs,pll-source: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of cell pairs containing a PLL index and its source. Allows to + overwrite clock source of the internal PLLs. + items: + items: + - description: PLL A (0) or PLL B (1) + enum: [ 0, 1 ] + - description: PLL source, XTAL (0) or CLKIN (1, Si5351C only). + enum: [ 0, 1 ] + + silabs,pll-reset-mode: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 2 + description: A list of cell pairs containing a PLL index and its reset mode. + items: + items: + - description: PLL A (0) or PLL B (1) + enum: [ 0, 1 ] + - description: | + Reset mode for the PLL. Mode can be one of: + + 0 - reset whenever PLL rate is adjusted (default mode) + 1 - do not reset when PLL rate is adjusted + + In mode 1, the PLL is only reset if the silabs,pll-reset is + specified in one of the clock output child nodes that also sources + the PLL. This mode may be preferable if output clocks are expected + to be adjusted without glitches. + enum: [ 0, 1 ] + +patternProperties: + "^clkout@[0-7]$": + type: object + + additionalProperties: false + + properties: + reg: + description: Clock output number. + + clock-frequency: true + + silabs,clock-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Source clock of the this output's divider stage. + + 0 - use multisynth N for this output, where N is the output number + 1 - use either multisynth 0 (if output number is 0-3) or multisynth 4 + (otherwise) for this output + 2 - use XTAL for this output + 3 - use CLKIN for this output (Si5351C only) + + silabs,drive-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 2, 4, 6, 8 ] + description: Output drive strength in mA. + + silabs,multisynth-source: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Source PLL A (0) or B (1) for the corresponding multisynth divider. + + silabs,pll-master: + type: boolean + description: | + The frequency of the source PLL is allowed to be changed by the + multisynth when setting the rate of this clock output. + + silabs,pll-reset: + type: boolean + description: Reset the source PLL when enabling this clock output. + + silabs,disable-state: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Clock output disable state. The state can be one of: + + 0 - clock output is driven LOW when disabled + 1 - clock output is driven HIGH when disabled + 2 - clock output is FLOATING (HIGH-Z) when disabled + 3 - clock output is never disabled + + allOf: + - if: + properties: + compatible: + contains: + const: silabs,si5351a-msop + then: + properties: + reg: + maximum: 2 + else: + properties: + reg: + maximum: 7 + + - if: + properties: + compatible: + contains: + const: silabs,si5351c + then: + properties: + silabs,clock-source: + enum: [ 0, 1, 2, 3 ] + else: + properties: + silabs,clock-source: + enum: [ 0, 1, 2 ] + + required: + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - silabs,si5351a + - silabs,si5351a-msop + - silabs,si5351b + then: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + +required: + - reg + - "#address-cells" + - "#size-cells" + - "#clock-cells" + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + clock-generator@60 { + compatible = "silabs,si5351a-msop"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + /* Connect XTAL input to 25MHz reference */ + clocks = <&ref25>; + clock-names = "xtal"; + + /* Use XTAL input as source of PLL0 and PLL1 */ + silabs,pll-source = <0 0>, <1 0>; + + /* Don't reset PLL1 on rate adjustment */ + silabs,pll-reset-mode = <1 1>; + + /* + * Overwrite CLK0 configuration with: + * - 8 mA output drive strength + * - PLL0 as clock source of multisynth 0 + * - Multisynth 0 as clock source of output divider + * - Multisynth 0 can change PLL0 + * - Set initial clock frequency of 74.25MHz + */ + clkout@0 { + reg = <0>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <0>; + silabs,clock-source = <0>; + silabs,pll-master; + clock-frequency = <74250000>; + }; + + /* + * Overwrite CLK1 configuration with: + * - 4 mA output drive strength + * - PLL1 as clock source of multisynth 1 + * - Multisynth 1 as clock source of output divider + * - Multisynth 1 can change PLL1 + * - Reset PLL1 when enabling this clock output + */ + clkout@1 { + reg = <1>; + silabs,drive-strength = <4>; + silabs,multisynth-source = <1>; + silabs,clock-source = <0>; + silabs,pll-master; + silabs,pll-reset; + }; + + /* + * Overwrite CLK2 configuration with: + * - XTAL as clock source of output divider + */ + clkout@2 { + reg = <2>; + silabs,clock-source = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml b/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml new file mode 100644 index 000000000000..c1dc24673c0d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sophgo,cv1800-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo CV1800 Series Clock Controller + +maintainers: + - Inochi Amaoto + +properties: + compatible: + enum: + - sophgo,cv1800-clk + - sophgo,cv1810-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#clock-cells": + const: 1 + description: + See for valid indices. + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clock-controller@3002000 { + compatible = "sophgo,cv1800-clk"; + reg = <0x03002000 0x1000>; + clocks = <&osc>; + #clock-cells = <1>; + }; + +... diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index a9a0bc448a4b..4ce83c5265b8 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -506,6 +506,8 @@ static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate, { struct si5351_hw_data *hwdata = container_of(hw, struct si5351_hw_data, hw); + struct si5351_platform_data *pdata = + hwdata->drvdata->client->dev.platform_data; u8 reg = (hwdata->num == 0) ? SI5351_PLLA_PARAMETERS : SI5351_PLLB_PARAMETERS; @@ -518,9 +520,10 @@ static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate, (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0); /* Do a pll soft reset on the affected pll */ - si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET, - hwdata->num == 0 ? SI5351_PLL_RESET_A : - SI5351_PLL_RESET_B); + if (pdata->pll_reset[hwdata->num]) + si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET, + hwdata->num == 0 ? SI5351_PLL_RESET_A : + SI5351_PLL_RESET_B); dev_dbg(&hwdata->drvdata->client->dev, "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n", @@ -1222,6 +1225,44 @@ static int si5351_dt_parse(struct i2c_client *client, } } + /* + * Parse PLL reset mode. For compatibility with older device trees, the + * default is to always reset a PLL after setting its rate. + */ + pdata->pll_reset[0] = true; + pdata->pll_reset[1] = true; + + of_property_for_each_u32(np, "silabs,pll-reset-mode", prop, p, num) { + if (num >= 2) { + dev_err(&client->dev, + "invalid pll %d on pll-reset-mode prop\n", num); + return -EINVAL; + } + + p = of_prop_next_u32(prop, p, &val); + if (!p) { + dev_err(&client->dev, + "missing pll-reset-mode for pll %d\n", num); + return -EINVAL; + } + + switch (val) { + case 0: + /* Reset PLL whenever its rate is adjusted */ + pdata->pll_reset[num] = true; + break; + case 1: + /* Don't reset PLL whenever its rate is adjusted */ + pdata->pll_reset[num] = false; + break; + default: + dev_err(&client->dev, + "invalid pll-reset-mode %d for pll %d\n", val, + num); + return -EINVAL; + } + } + /* per clkout properties */ for_each_child_of_node(np, child) { if (of_property_read_u32(child, "reg", &num)) { diff --git a/drivers/clk/clk-versaclock3.c b/drivers/clk/clk-versaclock3.c index 00930d7bca77..76d7ea1964c3 100644 --- a/drivers/clk/clk-versaclock3.c +++ b/drivers/clk/clk-versaclock3.c @@ -37,7 +37,7 @@ #define VC3_PLL1_M_DIV(n) ((n) & GENMASK(5, 0)) #define VC3_PLL1_VCO_N_DIVIDER 0x9 -#define VC3_PLL1_LOOP_FILTER_N_DIV_MSB 0x0a +#define VC3_PLL1_LOOP_FILTER_N_DIV_MSB 0xa #define VC3_OUT_DIV1_DIV2_CTRL 0xf @@ -148,16 +148,16 @@ struct vc3_pfd_data { }; struct vc3_pll_data { + unsigned long vco_min; + unsigned long vco_max; u8 num; u8 int_div_msb_offs; u8 int_div_lsb_offs; - unsigned long vco_min; - unsigned long vco_max; }; struct vc3_div_data { - u8 offs; const struct clk_div_table *table; + u8 offs; u8 shift; u8 width; u8 flags; @@ -210,7 +210,7 @@ static const struct clk_div_table div3_divs[] = { static struct clk_hw *clk_out[6]; -static unsigned char vc3_pfd_mux_get_parent(struct clk_hw *hw) +static u8 vc3_pfd_mux_get_parent(struct clk_hw *hw) { struct vc3_hw_data *vc3 = container_of(hw, struct vc3_hw_data, hw); const struct vc3_clk_data *pfd_mux = vc3->data; @@ -226,9 +226,8 @@ static int vc3_pfd_mux_set_parent(struct clk_hw *hw, u8 index) struct vc3_hw_data *vc3 = container_of(hw, struct vc3_hw_data, hw); const struct vc3_clk_data *pfd_mux = vc3->data; - regmap_update_bits(vc3->regmap, pfd_mux->offs, pfd_mux->bitmsk, - index ? pfd_mux->bitmsk : 0); - return 0; + return regmap_update_bits(vc3->regmap, pfd_mux->offs, pfd_mux->bitmsk, + index ? pfd_mux->bitmsk : 0); } static const struct clk_ops vc3_pfd_mux_ops = { @@ -440,7 +439,7 @@ static const struct clk_ops vc3_pll_ops = { .set_rate = vc3_pll_set_rate, }; -static unsigned char vc3_div_mux_get_parent(struct clk_hw *hw) +static u8 vc3_div_mux_get_parent(struct clk_hw *hw) { struct vc3_hw_data *vc3 = container_of(hw, struct vc3_hw_data, hw); const struct vc3_clk_data *div_mux = vc3->data; @@ -456,10 +455,8 @@ static int vc3_div_mux_set_parent(struct clk_hw *hw, u8 index) struct vc3_hw_data *vc3 = container_of(hw, struct vc3_hw_data, hw); const struct vc3_clk_data *div_mux = vc3->data; - regmap_update_bits(vc3->regmap, div_mux->offs, div_mux->bitmsk, - index ? div_mux->bitmsk : 0); - - return 0; + return regmap_update_bits(vc3->regmap, div_mux->offs, div_mux->bitmsk, + index ? div_mux->bitmsk : 0); } static const struct clk_ops vc3_div_mux_ops = { @@ -477,7 +474,7 @@ static unsigned int vc3_get_div(const struct clk_div_table *table, if (clkt->val == val) return clkt->div; - return 0; + return 1; } static unsigned long vc3_div_recalc_rate(struct clk_hw *hw, @@ -524,10 +521,9 @@ static int vc3_div_set_rate(struct clk_hw *hw, unsigned long rate, value = divider_get_val(rate, parent_rate, div_data->table, div_data->width, div_data->flags); - regmap_update_bits(vc3->regmap, div_data->offs, - VC3_DIV_MASK(div_data->width) << div_data->shift, - value << div_data->shift); - return 0; + return regmap_update_bits(vc3->regmap, div_data->offs, + VC3_DIV_MASK(div_data->width) << div_data->shift, + value << div_data->shift); } static const struct clk_ops vc3_div_ops = { @@ -539,11 +535,9 @@ static const struct clk_ops vc3_div_ops = { static int vc3_clk_mux_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) { - int ret; int frc; - ret = clk_mux_determine_rate_flags(hw, req, CLK_SET_RATE_PARENT); - if (ret) { + if (clk_mux_determine_rate_flags(hw, req, CLK_SET_RATE_PARENT)) { /* The below check is equivalent to (best_parent_rate/rate) */ if (req->best_parent_rate >= req->rate) { frc = DIV_ROUND_CLOSEST_ULL(req->best_parent_rate, @@ -552,13 +546,12 @@ static int vc3_clk_mux_determine_rate(struct clk_hw *hw, return clk_mux_determine_rate_flags(hw, req, CLK_SET_RATE_PARENT); } - ret = 0; } - return ret; + return 0; } -static unsigned char vc3_clk_mux_get_parent(struct clk_hw *hw) +static u8 vc3_clk_mux_get_parent(struct clk_hw *hw) { struct vc3_hw_data *vc3 = container_of(hw, struct vc3_hw_data, hw); const struct vc3_clk_data *clk_mux = vc3->data; @@ -574,9 +567,8 @@ static int vc3_clk_mux_set_parent(struct clk_hw *hw, u8 index) struct vc3_hw_data *vc3 = container_of(hw, struct vc3_hw_data, hw); const struct vc3_clk_data *clk_mux = vc3->data; - regmap_update_bits(vc3->regmap, clk_mux->offs, - clk_mux->bitmsk, index ? clk_mux->bitmsk : 0); - return 0; + return regmap_update_bits(vc3->regmap, clk_mux->offs, clk_mux->bitmsk, + index ? clk_mux->bitmsk : 0); } static const struct clk_ops vc3_clk_mux_ops = { @@ -605,7 +597,7 @@ static struct vc3_hw_data clk_pfd_mux[] = { .offs = VC3_PLL_OP_CTRL, .bitmsk = BIT(VC3_PLL_OP_CTRL_PLL2_REFIN_SEL) }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "pfd2_mux", .ops = &vc3_pfd_mux_ops, .parent_data = pfd_mux_parent_data, @@ -618,7 +610,7 @@ static struct vc3_hw_data clk_pfd_mux[] = { .offs = VC3_GENERAL_CTR, .bitmsk = BIT(VC3_GENERAL_CTR_PLL3_REFIN_SEL) }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "pfd3_mux", .ops = &vc3_pfd_mux_ops, .parent_data = pfd_mux_parent_data, @@ -636,7 +628,7 @@ static struct vc3_hw_data clk_pfd[] = { .mdiv1_bitmsk = VC3_PLL1_M_DIV1, .mdiv2_bitmsk = VC3_PLL1_M_DIV2 }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "pfd1", .ops = &vc3_pfd_ops, .parent_data = &(const struct clk_parent_data) { @@ -653,7 +645,7 @@ static struct vc3_hw_data clk_pfd[] = { .mdiv1_bitmsk = VC3_PLL2_M_DIV1, .mdiv2_bitmsk = VC3_PLL2_M_DIV2 }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "pfd2", .ops = &vc3_pfd_ops, .parent_hws = (const struct clk_hw *[]) { @@ -670,7 +662,7 @@ static struct vc3_hw_data clk_pfd[] = { .mdiv1_bitmsk = VC3_PLL3_M_DIV1, .mdiv2_bitmsk = VC3_PLL3_M_DIV2 }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "pfd3", .ops = &vc3_pfd_ops, .parent_hws = (const struct clk_hw *[]) { @@ -691,7 +683,7 @@ static struct vc3_hw_data clk_pll[] = { .vco_min = VC3_PLL1_VCO_MIN, .vco_max = VC3_PLL1_VCO_MAX }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "pll1", .ops = &vc3_pll_ops, .parent_hws = (const struct clk_hw *[]) { @@ -709,7 +701,7 @@ static struct vc3_hw_data clk_pll[] = { .vco_min = VC3_PLL2_VCO_MIN, .vco_max = VC3_PLL2_VCO_MAX }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "pll2", .ops = &vc3_pll_ops, .parent_hws = (const struct clk_hw *[]) { @@ -727,7 +719,7 @@ static struct vc3_hw_data clk_pll[] = { .vco_min = VC3_PLL3_VCO_MIN, .vco_max = VC3_PLL3_VCO_MAX }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "pll3", .ops = &vc3_pll_ops, .parent_hws = (const struct clk_hw *[]) { @@ -760,7 +752,7 @@ static struct vc3_hw_data clk_div_mux[] = { .offs = VC3_GENERAL_CTR, .bitmsk = VC3_GENERAL_CTR_DIV1_SRC_SEL }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "div1_mux", .ops = &vc3_div_mux_ops, .parent_data = div_mux_parent_data[VC3_DIV1_MUX], @@ -773,7 +765,7 @@ static struct vc3_hw_data clk_div_mux[] = { .offs = VC3_PLL3_CHARGE_PUMP_CTRL, .bitmsk = VC3_PLL3_CHARGE_PUMP_CTRL_OUTDIV3_SRC_SEL }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "div3_mux", .ops = &vc3_div_mux_ops, .parent_data = div_mux_parent_data[VC3_DIV3_MUX], @@ -786,7 +778,7 @@ static struct vc3_hw_data clk_div_mux[] = { .offs = VC3_OUTPUT_CTR, .bitmsk = VC3_OUTPUT_CTR_DIV4_SRC_SEL }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "div4_mux", .ops = &vc3_div_mux_ops, .parent_data = div_mux_parent_data[VC3_DIV4_MUX], @@ -805,7 +797,7 @@ static struct vc3_hw_data clk_div[] = { .width = 4, .flags = CLK_DIVIDER_READ_ONLY }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "div1", .ops = &vc3_div_ops, .parent_hws = (const struct clk_hw *[]) { @@ -823,7 +815,7 @@ static struct vc3_hw_data clk_div[] = { .width = 4, .flags = CLK_DIVIDER_READ_ONLY }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "div2", .ops = &vc3_div_ops, .parent_hws = (const struct clk_hw *[]) { @@ -841,7 +833,7 @@ static struct vc3_hw_data clk_div[] = { .width = 4, .flags = CLK_DIVIDER_READ_ONLY }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "div3", .ops = &vc3_div_ops, .parent_hws = (const struct clk_hw *[]) { @@ -859,7 +851,7 @@ static struct vc3_hw_data clk_div[] = { .width = 4, .flags = CLK_DIVIDER_READ_ONLY }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "div4", .ops = &vc3_div_ops, .parent_hws = (const struct clk_hw *[]) { @@ -877,7 +869,7 @@ static struct vc3_hw_data clk_div[] = { .width = 4, .flags = CLK_DIVIDER_READ_ONLY }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "div5", .ops = &vc3_div_ops, .parent_hws = (const struct clk_hw *[]) { @@ -895,7 +887,7 @@ static struct vc3_hw_data clk_mux[] = { .offs = VC3_SE1_DIV4_CTRL, .bitmsk = VC3_SE1_DIV4_CTRL_SE1_CLK_SEL }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "se1_mux", .ops = &vc3_clk_mux_ops, .parent_hws = (const struct clk_hw *[]) { @@ -911,7 +903,7 @@ static struct vc3_hw_data clk_mux[] = { .offs = VC3_SE2_CTRL_REG0, .bitmsk = VC3_SE2_CTRL_REG0_SE2_CLK_SEL }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "se2_mux", .ops = &vc3_clk_mux_ops, .parent_hws = (const struct clk_hw *[]) { @@ -927,7 +919,7 @@ static struct vc3_hw_data clk_mux[] = { .offs = VC3_SE3_DIFF1_CTRL_REG, .bitmsk = VC3_SE3_DIFF1_CTRL_REG_SE3_CLK_SEL }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "se3_mux", .ops = &vc3_clk_mux_ops, .parent_hws = (const struct clk_hw *[]) { @@ -943,7 +935,7 @@ static struct vc3_hw_data clk_mux[] = { .offs = VC3_DIFF1_CTRL_REG, .bitmsk = VC3_DIFF1_CTRL_REG_DIFF1_CLK_SEL }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "diff1_mux", .ops = &vc3_clk_mux_ops, .parent_hws = (const struct clk_hw *[]) { @@ -959,7 +951,7 @@ static struct vc3_hw_data clk_mux[] = { .offs = VC3_DIFF2_CTRL_REG, .bitmsk = VC3_DIFF2_CTRL_REG_DIFF2_CLK_SEL }, - .hw.init = &(struct clk_init_data){ + .hw.init = &(struct clk_init_data) { .name = "diff2_mux", .ops = &vc3_clk_mux_ops, .parent_hws = (const struct clk_hw *[]) { diff --git a/drivers/clk/samsung/clk-cpu.h b/drivers/clk/samsung/clk-cpu.h index fc9f67a3b22e..0164bd9ad021 100644 --- a/drivers/clk/samsung/clk-cpu.h +++ b/drivers/clk/samsung/clk-cpu.h @@ -11,10 +11,10 @@ #include "clk.h" /** - * struct exynos_cpuclk_data: config data to setup cpu clocks. - * @prate: frequency of the primary parent clock (in KHz). - * @div0: value to be programmed in the div_cpu0 register. - * @div1: value to be programmed in the div_cpu1 register. + * struct exynos_cpuclk_cfg_data - config data to setup cpu clocks + * @prate: frequency of the primary parent clock (in KHz) + * @div0: value to be programmed in the div_cpu0 register + * @div1: value to be programmed in the div_cpu1 register * * This structure holds the divider configuration data for dividers in the CPU * clock domain. The parent frequency at which these divider values are valid is @@ -29,17 +29,17 @@ struct exynos_cpuclk_cfg_data { }; /** - * struct exynos_cpuclk: information about clock supplied to a CPU core. - * @hw: handle between CCF and CPU clock. - * @alt_parent: alternate parent clock to use when switching the speed - * of the primary parent clock. - * @ctrl_base: base address of the clock controller. - * @lock: cpu clock domain register access lock. - * @cfg: cpu clock rate configuration data. - * @num_cfgs: number of array elements in @cfg array. - * @clk_nb: clock notifier registered for changes in clock speed of the - * primary parent clock. - * @flags: configuration flags for the CPU clock. + * struct exynos_cpuclk - information about clock supplied to a CPU core + * @hw: handle between CCF and CPU clock + * @alt_parent: alternate parent clock to use when switching the speed + * of the primary parent clock + * @ctrl_base: base address of the clock controller + * @lock: cpu clock domain register access lock + * @cfg: cpu clock rate configuration data + * @num_cfgs: number of array elements in @cfg array + * @clk_nb: clock notifier registered for changes in clock speed of the + * primary parent clock + * @flags: configuration flags for the CPU clock * * This structure holds information required for programming the CPU clock for * various clock speeds. diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h index ab9c3d7a25b3..516b716407e5 100644 --- a/drivers/clk/samsung/clk.h +++ b/drivers/clk/samsung/clk.h @@ -14,11 +14,11 @@ #include "clk-pll.h" /** - * struct samsung_clk_provider: information about clock provider - * @reg_base: virtual address for the register base. - * @dev: clock provider device needed for runtime PM. - * @lock: maintains exclusion between callbacks for a given clock-provider. - * @clk_data: holds clock related data like clk_hw* and number of clocks. + * struct samsung_clk_provider - information about clock provider + * @reg_base: virtual address for the register base + * @dev: clock provider device needed for runtime PM + * @lock: maintains exclusion between callbacks for a given clock-provider + * @clk_data: holds clock related data like clk_hw* and number of clocks */ struct samsung_clk_provider { void __iomem *reg_base; @@ -29,10 +29,10 @@ struct samsung_clk_provider { }; /** - * struct samsung_clock_alias: information about mux clock - * @id: platform specific id of the clock. - * @dev_name: name of the device to which this clock belongs. - * @alias: optional clock alias name to be assigned to this clock. + * struct samsung_clock_alias - information about mux clock + * @id: platform specific id of the clock + * @dev_name: name of the device to which this clock belongs + * @alias: optional clock alias name to be assigned to this clock */ struct samsung_clock_alias { unsigned int id; @@ -50,12 +50,12 @@ struct samsung_clock_alias { #define MHZ (1000 * 1000) /** - * struct samsung_fixed_rate_clock: information about fixed-rate clock - * @id: platform specific id of the clock. - * @name: name of this fixed-rate clock. - * @parent_name: optional parent clock name. - * @flags: optional fixed-rate clock flags. - * @fixed-rate: fixed clock rate of this clock. + * struct samsung_fixed_rate_clock - information about fixed-rate clock + * @id: platform specific id of the clock + * @name: name of this fixed-rate clock + * @parent_name: optional parent clock name + * @flags: optional fixed-rate clock flags + * @fixed_rate: fixed clock rate of this clock */ struct samsung_fixed_rate_clock { unsigned int id; @@ -74,14 +74,14 @@ struct samsung_fixed_rate_clock { .fixed_rate = frate, \ } -/* - * struct samsung_fixed_factor_clock: information about fixed-factor clock - * @id: platform specific id of the clock. - * @name: name of this fixed-factor clock. - * @parent_name: parent clock name. - * @mult: fixed multiplication factor. - * @div: fixed division factor. - * @flags: optional fixed-factor clock flags. +/** + * struct samsung_fixed_factor_clock - information about fixed-factor clock + * @id: platform specific id of the clock + * @name: name of this fixed-factor clock + * @parent_name: parent clock name + * @mult: fixed multiplication factor + * @div: fixed division factor + * @flags: optional fixed-factor clock flags */ struct samsung_fixed_factor_clock { unsigned int id; @@ -103,16 +103,16 @@ struct samsung_fixed_factor_clock { } /** - * struct samsung_mux_clock: information about mux clock - * @id: platform specific id of the clock. - * @name: name of this mux clock. - * @parent_names: array of pointer to parent clock names. - * @num_parents: number of parents listed in @parent_names. - * @flags: optional flags for basic clock. - * @offset: offset of the register for configuring the mux. - * @shift: starting bit location of the mux control bit-field in @reg. - * @width: width of the mux control bit-field in @reg. - * @mux_flags: flags for mux-type clock. + * struct samsung_mux_clock - information about mux clock + * @id: platform specific id of the clock + * @name: name of this mux clock + * @parent_names: array of pointer to parent clock names + * @num_parents: number of parents listed in @parent_names + * @flags: optional flags for basic clock + * @offset: offset of the register for configuring the mux + * @shift: starting bit location of the mux control bit-field in @reg + * @width: width of the mux control bit-field in @reg + * @mux_flags: flags for mux-type clock */ struct samsung_mux_clock { unsigned int id; @@ -146,14 +146,16 @@ struct samsung_mux_clock { __MUX(_id, cname, pnames, o, s, w, f, mf) /** - * @id: platform specific id of the clock. - * struct samsung_div_clock: information about div clock - * @name: name of this div clock. - * @parent_name: name of the parent clock. - * @flags: optional flags for basic clock. - * @offset: offset of the register for configuring the div. - * @shift: starting bit location of the div control bit-field in @reg. - * @div_flags: flags for div-type clock. + * struct samsung_div_clock - information about div clock + * @id: platform specific id of the clock + * @name: name of this div clock + * @parent_name: name of the parent clock + * @flags: optional flags for basic clock + * @offset: offset of the register for configuring the div + * @shift: starting bit location of the div control bit-field in @reg + * @width: width of the bitfield + * @div_flags: flags for div-type clock + * @table: array of divider/value pairs ending with a div set to 0 */ struct samsung_div_clock { unsigned int id; @@ -190,14 +192,14 @@ struct samsung_div_clock { __DIV(_id, cname, pname, o, s, w, 0, 0, t) /** - * struct samsung_gate_clock: information about gate clock - * @id: platform specific id of the clock. - * @name: name of this gate clock. - * @parent_name: name of the parent clock. - * @flags: optional flags for basic clock. - * @offset: offset of the register for configuring the gate. - * @bit_idx: bit index of the gate control bit-field in @reg. - * @gate_flags: flags for gate-type clock. + * struct samsung_gate_clock - information about gate clock + * @id: platform specific id of the clock + * @name: name of this gate clock + * @parent_name: name of the parent clock + * @flags: optional flags for basic clock + * @offset: offset of the register for configuring the gate + * @bit_idx: bit index of the gate control bit-field in @reg + * @gate_flags: flags for gate-type clock */ struct samsung_gate_clock { unsigned int id; @@ -226,9 +228,9 @@ struct samsung_gate_clock { #define PNAME(x) static const char * const x[] __initconst /** - * struct samsung_clk_reg_dump: register dump of clock controller registers. - * @offset: clock register offset from the controller base address. - * @value: the value to be register at offset. + * struct samsung_clk_reg_dump - register dump of clock controller registers + * @offset: clock register offset from the controller base address + * @value: the value to be register at offset */ struct samsung_clk_reg_dump { u32 offset; @@ -236,14 +238,15 @@ struct samsung_clk_reg_dump { }; /** - * struct samsung_pll_clock: information about pll clock - * @id: platform specific id of the clock. - * @name: name of this pll clock. - * @parent_name: name of the parent clock. - * @flags: optional flags for basic clock. - * @con_offset: offset of the register for configuring the PLL. - * @lock_offset: offset of the register for locking the PLL. - * @type: Type of PLL to be registered. + * struct samsung_pll_clock - information about pll clock + * @id: platform specific id of the clock + * @name: name of this pll clock + * @parent_name: name of the parent clock + * @flags: optional flags for basic clock + * @con_offset: offset of the register for configuring the PLL + * @lock_offset: offset of the register for locking the PLL + * @type: type of PLL to be registered + * @rate_table: array of PLL settings for possible PLL rates */ struct samsung_pll_clock { unsigned int id; @@ -302,39 +305,51 @@ struct samsung_clock_reg_cache { unsigned int rsuspend_num; }; +/** + * struct samsung_cmu_info - all clocks information needed for CMU registration + * @pll_clks: list of PLL clocks + * @nr_pll_clks: count of clocks in @pll_clks + * @mux_clks: list of mux clocks + * @nr_mux_clks: count of clocks in @mux_clks + * @div_clks: list of div clocks + * @nr_div_clks: count of clocks in @div_clks + * @gate_clks: list of gate clocks + * @nr_gate_clks: count of clocks in @gate_clks + * @fixed_clks: list of fixed clocks + * @nr_fixed_clks: count clocks in @fixed_clks + * @fixed_factor_clks: list of fixed factor clocks + * @nr_fixed_factor_clks: count of clocks in @fixed_factor_clks + * @nr_clk_ids: total number of clocks with IDs assigned + * @cpu_clks: list of CPU clocks + * @nr_cpu_clks: count of clocks in @cpu_clks + * @clk_regs: list of clock registers + * @nr_clk_regs: count of clock registers in @clk_regs + * @suspend_regs: list of clock registers to set before suspend + * @nr_suspend_regs: count of clock registers in @suspend_regs + * @clk_name: name of the parent clock needed for CMU register access + */ struct samsung_cmu_info { - /* list of pll clocks and respective count */ const struct samsung_pll_clock *pll_clks; unsigned int nr_pll_clks; - /* list of mux clocks and respective count */ const struct samsung_mux_clock *mux_clks; unsigned int nr_mux_clks; - /* list of div clocks and respective count */ const struct samsung_div_clock *div_clks; unsigned int nr_div_clks; - /* list of gate clocks and respective count */ const struct samsung_gate_clock *gate_clks; unsigned int nr_gate_clks; - /* list of fixed clocks and respective count */ const struct samsung_fixed_rate_clock *fixed_clks; unsigned int nr_fixed_clks; - /* list of fixed factor clocks and respective count */ const struct samsung_fixed_factor_clock *fixed_factor_clks; unsigned int nr_fixed_factor_clks; - /* total number of clocks with IDs assigned*/ unsigned int nr_clk_ids; - /* list of cpu clocks and respective count */ const struct samsung_cpu_clock *cpu_clks; unsigned int nr_cpu_clks; - /* list and number of clocks registers */ const unsigned long *clk_regs; unsigned int nr_clk_regs; - /* list and number of clocks registers to set before suspend */ const struct samsung_clk_reg_dump *suspend_regs; unsigned int nr_suspend_regs; - /* name of the parent clock needed for CMU register access */ const char *clk_name; }; diff --git a/drivers/clk/starfive/clk-starfive-jh7100-audio.c b/drivers/clk/starfive/clk-starfive-jh7100-audio.c index ee4bda14a40e..1fcf4e62f347 100644 --- a/drivers/clk/starfive/clk-starfive-jh7100-audio.c +++ b/drivers/clk/starfive/clk-starfive-jh7100-audio.c @@ -79,7 +79,7 @@ static const struct jh71x0_clk_data jh7100_audclk_data[] = { JH71X0_GDIV(JH7100_AUDCLK_USB_LPM, "usb_lpm", CLK_IGNORE_UNUSED, 4, JH7100_AUDCLK_USB_APB), JH71X0_GDIV(JH7100_AUDCLK_USB_STB, "usb_stb", CLK_IGNORE_UNUSED, 3, JH7100_AUDCLK_USB_APB), JH71X0__DIV(JH7100_AUDCLK_APB_EN, "apb_en", 8, JH7100_AUDCLK_DOM7AHB_BUS), - JH71X0__MUX(JH7100_AUDCLK_VAD_MEM, "vad_mem", 2, + JH71X0__MUX(JH7100_AUDCLK_VAD_MEM, "vad_mem", 0, 2, JH7100_AUDCLK_VAD_INTMEM, JH7100_AUDCLK_AUDIO_12288), }; diff --git a/drivers/clk/starfive/clk-starfive-jh7100.c b/drivers/clk/starfive/clk-starfive-jh7100.c index 69cc11ea7e33..03f6f26a15d8 100644 --- a/drivers/clk/starfive/clk-starfive-jh7100.c +++ b/drivers/clk/starfive/clk-starfive-jh7100.c @@ -24,48 +24,48 @@ #define JH7100_CLK_GMAC_GR_MII_RX (JH7100_CLK_END + 3) static const struct jh71x0_clk_data jh7100_clk_data[] __initconst = { - JH71X0__MUX(JH7100_CLK_CPUNDBUS_ROOT, "cpundbus_root", 4, + JH71X0__MUX(JH7100_CLK_CPUNDBUS_ROOT, "cpundbus_root", 0, 4, JH7100_CLK_OSC_SYS, JH7100_CLK_PLL0_OUT, JH7100_CLK_PLL1_OUT, JH7100_CLK_PLL2_OUT), - JH71X0__MUX(JH7100_CLK_DLA_ROOT, "dla_root", 3, + JH71X0__MUX(JH7100_CLK_DLA_ROOT, "dla_root", 0, 3, JH7100_CLK_OSC_SYS, JH7100_CLK_PLL1_OUT, JH7100_CLK_PLL2_OUT), - JH71X0__MUX(JH7100_CLK_DSP_ROOT, "dsp_root", 4, + JH71X0__MUX(JH7100_CLK_DSP_ROOT, "dsp_root", 0, 4, JH7100_CLK_OSC_SYS, JH7100_CLK_PLL0_OUT, JH7100_CLK_PLL1_OUT, JH7100_CLK_PLL2_OUT), - JH71X0__MUX(JH7100_CLK_GMACUSB_ROOT, "gmacusb_root", 3, + JH71X0__MUX(JH7100_CLK_GMACUSB_ROOT, "gmacusb_root", 0, 3, JH7100_CLK_OSC_SYS, JH7100_CLK_PLL0_OUT, JH7100_CLK_PLL2_OUT), - JH71X0__MUX(JH7100_CLK_PERH0_ROOT, "perh0_root", 2, + JH71X0__MUX(JH7100_CLK_PERH0_ROOT, "perh0_root", 0, 2, JH7100_CLK_OSC_SYS, JH7100_CLK_PLL0_OUT), - JH71X0__MUX(JH7100_CLK_PERH1_ROOT, "perh1_root", 2, + JH71X0__MUX(JH7100_CLK_PERH1_ROOT, "perh1_root", 0, 2, JH7100_CLK_OSC_SYS, JH7100_CLK_PLL2_OUT), - JH71X0__MUX(JH7100_CLK_VIN_ROOT, "vin_root", 3, + JH71X0__MUX(JH7100_CLK_VIN_ROOT, "vin_root", 0, 3, JH7100_CLK_OSC_SYS, JH7100_CLK_PLL1_OUT, JH7100_CLK_PLL2_OUT), - JH71X0__MUX(JH7100_CLK_VOUT_ROOT, "vout_root", 3, + JH71X0__MUX(JH7100_CLK_VOUT_ROOT, "vout_root", 0, 3, JH7100_CLK_OSC_AUD, JH7100_CLK_PLL0_OUT, JH7100_CLK_PLL2_OUT), JH71X0_GDIV(JH7100_CLK_AUDIO_ROOT, "audio_root", 0, 8, JH7100_CLK_PLL0_OUT), - JH71X0__MUX(JH7100_CLK_CDECHIFI4_ROOT, "cdechifi4_root", 3, + JH71X0__MUX(JH7100_CLK_CDECHIFI4_ROOT, "cdechifi4_root", 0, 3, JH7100_CLK_OSC_SYS, JH7100_CLK_PLL1_OUT, JH7100_CLK_PLL2_OUT), - JH71X0__MUX(JH7100_CLK_CDEC_ROOT, "cdec_root", 3, + JH71X0__MUX(JH7100_CLK_CDEC_ROOT, "cdec_root", 0, 3, JH7100_CLK_OSC_SYS, JH7100_CLK_PLL0_OUT, JH7100_CLK_PLL1_OUT), - JH71X0__MUX(JH7100_CLK_VOUTBUS_ROOT, "voutbus_root", 3, + JH71X0__MUX(JH7100_CLK_VOUTBUS_ROOT, "voutbus_root", 0, 3, JH7100_CLK_OSC_AUD, JH7100_CLK_PLL0_OUT, JH7100_CLK_PLL2_OUT), @@ -76,7 +76,7 @@ static const struct jh71x0_clk_data jh7100_clk_data[] __initconst = { JH71X0_GDIV(JH7100_CLK_PLL0_TESTOUT, "pll0_testout", 0, 31, JH7100_CLK_PERH0_SRC), JH71X0_GDIV(JH7100_CLK_PLL1_TESTOUT, "pll1_testout", 0, 31, JH7100_CLK_DLA_ROOT), JH71X0_GDIV(JH7100_CLK_PLL2_TESTOUT, "pll2_testout", 0, 31, JH7100_CLK_PERH1_SRC), - JH71X0__MUX(JH7100_CLK_PLL2_REF, "pll2_refclk", 2, + JH71X0__MUX(JH7100_CLK_PLL2_REF, "pll2_refclk", 0, 2, JH7100_CLK_OSC_SYS, JH7100_CLK_OSC_AUD), JH71X0__DIV(JH7100_CLK_CPU_CORE, "cpu_core", 8, JH7100_CLK_CPUNBUS_ROOT_DIV), @@ -142,7 +142,7 @@ static const struct jh71x0_clk_data jh7100_clk_data[] __initconst = { JH71X0__DIV(JH7100_CLK_NOC_COG, "noc_cog", 8, JH7100_CLK_DLA_ROOT), JH71X0_GATE(JH7100_CLK_NNE_AHB, "nne_ahb", 0, JH7100_CLK_AHB_BUS), JH71X0__DIV(JH7100_CLK_NNEBUS_SRC1, "nnebus_src1", 4, JH7100_CLK_DSP_ROOT), - JH71X0__MUX(JH7100_CLK_NNE_BUS, "nne_bus", 2, + JH71X0__MUX(JH7100_CLK_NNE_BUS, "nne_bus", 0, 2, JH7100_CLK_CPU_AXI, JH7100_CLK_NNEBUS_SRC1), JH71X0_GATE(JH7100_CLK_NNE_AXI, "nne_axi", 0, JH7100_CLK_NNE_BUS), @@ -166,7 +166,7 @@ static const struct jh71x0_clk_data jh7100_clk_data[] __initconst = { JH71X0_GDIV(JH7100_CLK_USBPHY_125M, "usbphy_125m", 0, 8, JH7100_CLK_USBPHY_ROOTDIV), JH71X0_GDIV(JH7100_CLK_USBPHY_PLLDIV25M, "usbphy_plldiv25m", 0, 32, JH7100_CLK_USBPHY_ROOTDIV), - JH71X0__MUX(JH7100_CLK_USBPHY_25M, "usbphy_25m", 2, + JH71X0__MUX(JH7100_CLK_USBPHY_25M, "usbphy_25m", 0, 2, JH7100_CLK_OSC_SYS, JH7100_CLK_USBPHY_PLLDIV25M), JH71X0_FDIV(JH7100_CLK_AUDIO_DIV, "audio_div", JH7100_CLK_AUDIO_ROOT), @@ -200,12 +200,12 @@ static const struct jh71x0_clk_data jh7100_clk_data[] __initconst = { JH71X0_GDIV(JH7100_CLK_GMAC_GTX, "gmac_gtxclk", 0, 255, JH7100_CLK_GMAC_ROOT_DIV), JH71X0_GDIV(JH7100_CLK_GMAC_RMII_TX, "gmac_rmii_txclk", 0, 8, JH7100_CLK_GMAC_RMII_REF), JH71X0_GDIV(JH7100_CLK_GMAC_RMII_RX, "gmac_rmii_rxclk", 0, 8, JH7100_CLK_GMAC_RMII_REF), - JH71X0__MUX(JH7100_CLK_GMAC_TX, "gmac_tx", 3, + JH71X0__MUX(JH7100_CLK_GMAC_TX, "gmac_tx", CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT, 3, JH7100_CLK_GMAC_GTX, JH7100_CLK_GMAC_TX_INV, JH7100_CLK_GMAC_RMII_TX), JH71X0__INV(JH7100_CLK_GMAC_TX_INV, "gmac_tx_inv", JH7100_CLK_GMAC_TX), - JH71X0__MUX(JH7100_CLK_GMAC_RX_PRE, "gmac_rx_pre", 2, + JH71X0__MUX(JH7100_CLK_GMAC_RX_PRE, "gmac_rx_pre", 0, 2, JH7100_CLK_GMAC_GR_MII_RX, JH7100_CLK_GMAC_RMII_RX), JH71X0__INV(JH7100_CLK_GMAC_RX_INV, "gmac_rx_inv", JH7100_CLK_GMAC_RX_PRE), diff --git a/drivers/clk/starfive/clk-starfive-jh7110-aon.c b/drivers/clk/starfive/clk-starfive-jh7110-aon.c index 62954eb7b50a..418efdad719b 100644 --- a/drivers/clk/starfive/clk-starfive-jh7110-aon.c +++ b/drivers/clk/starfive/clk-starfive-jh7110-aon.c @@ -26,7 +26,7 @@ static const struct jh71x0_clk_data jh7110_aonclk_data[] = { /* source */ JH71X0__DIV(JH7110_AONCLK_OSC_DIV4, "osc_div4", 4, JH7110_AONCLK_OSC), - JH71X0__MUX(JH7110_AONCLK_APB_FUNC, "apb_func", 2, + JH71X0__MUX(JH7110_AONCLK_APB_FUNC, "apb_func", 0, 2, JH7110_AONCLK_OSC_DIV4, JH7110_AONCLK_OSC), /* gmac0 */ @@ -39,7 +39,7 @@ static const struct jh71x0_clk_data jh7110_aonclk_data[] = { JH7110_AONCLK_GMAC0_GTXCLK, JH7110_AONCLK_GMAC0_RMII_RTX), JH71X0__INV(JH7110_AONCLK_GMAC0_TX_INV, "gmac0_tx_inv", JH7110_AONCLK_GMAC0_TX), - JH71X0__MUX(JH7110_AONCLK_GMAC0_RX, "gmac0_rx", 2, + JH71X0__MUX(JH7110_AONCLK_GMAC0_RX, "gmac0_rx", 0, 2, JH7110_AONCLK_GMAC0_RGMII_RXIN, JH7110_AONCLK_GMAC0_RMII_RTX), JH71X0__INV(JH7110_AONCLK_GMAC0_RX_INV, "gmac0_rx_inv", JH7110_AONCLK_GMAC0_RX), @@ -48,7 +48,7 @@ static const struct jh71x0_clk_data jh7110_aonclk_data[] = { /* rtc */ JH71X0_GATE(JH7110_AONCLK_RTC_APB, "rtc_apb", 0, JH7110_AONCLK_APB_BUS), JH71X0__DIV(JH7110_AONCLK_RTC_INTERNAL, "rtc_internal", 1022, JH7110_AONCLK_OSC), - JH71X0__MUX(JH7110_AONCLK_RTC_32K, "rtc_32k", 2, + JH71X0__MUX(JH7110_AONCLK_RTC_32K, "rtc_32k", 0, 2, JH7110_AONCLK_RTC_OSC, JH7110_AONCLK_RTC_INTERNAL), JH71X0_GATE(JH7110_AONCLK_RTC_CAL, "rtc_cal", 0, JH7110_AONCLK_OSC), diff --git a/drivers/clk/starfive/clk-starfive-jh7110-isp.c b/drivers/clk/starfive/clk-starfive-jh7110-isp.c index ce034ed28532..929b8788279e 100644 --- a/drivers/clk/starfive/clk-starfive-jh7110-isp.c +++ b/drivers/clk/starfive/clk-starfive-jh7110-isp.c @@ -53,7 +53,7 @@ static const struct jh71x0_clk_data jh7110_ispclk_data[] = { JH7110_ISPCLK_MIPI_RX0_PXL), JH71X0_GATE(JH7110_ISPCLK_VIN_PIXEL_IF3, "vin_pixel_if3", 0, JH7110_ISPCLK_MIPI_RX0_PXL), - JH71X0__MUX(JH7110_ISPCLK_VIN_P_AXI_WR, "vin_p_axi_wr", 2, + JH71X0__MUX(JH7110_ISPCLK_VIN_P_AXI_WR, "vin_p_axi_wr", 0, 2, JH7110_ISPCLK_MIPI_RX0_PXL, JH7110_ISPCLK_DVP_INV), /* ispv2_top_wrapper */ diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c index 3884eff9fe93..8f5e5abfa178 100644 --- a/drivers/clk/starfive/clk-starfive-jh7110-sys.c +++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c @@ -36,18 +36,18 @@ static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = { /* root */ - JH71X0__MUX(JH7110_SYSCLK_CPU_ROOT, "cpu_root", 2, + JH71X0__MUX(JH7110_SYSCLK_CPU_ROOT, "cpu_root", 0, 2, JH7110_SYSCLK_OSC, JH7110_SYSCLK_PLL0_OUT), JH71X0__DIV(JH7110_SYSCLK_CPU_CORE, "cpu_core", 7, JH7110_SYSCLK_CPU_ROOT), JH71X0__DIV(JH7110_SYSCLK_CPU_BUS, "cpu_bus", 2, JH7110_SYSCLK_CPU_CORE), - JH71X0__MUX(JH7110_SYSCLK_GPU_ROOT, "gpu_root", 2, + JH71X0__MUX(JH7110_SYSCLK_GPU_ROOT, "gpu_root", 0, 2, JH7110_SYSCLK_PLL2_OUT, JH7110_SYSCLK_PLL1_OUT), JH71X0_MDIV(JH7110_SYSCLK_PERH_ROOT, "perh_root", 2, 2, JH7110_SYSCLK_PLL0_OUT, JH7110_SYSCLK_PLL2_OUT), - JH71X0__MUX(JH7110_SYSCLK_BUS_ROOT, "bus_root", 2, + JH71X0__MUX(JH7110_SYSCLK_BUS_ROOT, "bus_root", 0, 2, JH7110_SYSCLK_OSC, JH7110_SYSCLK_PLL2_OUT), JH71X0__DIV(JH7110_SYSCLK_NOCSTG_BUS, "nocstg_bus", 3, JH7110_SYSCLK_BUS_ROOT), @@ -62,7 +62,7 @@ static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = { JH71X0__DIV(JH7110_SYSCLK_PLL2_DIV2, "pll2_div2", 2, JH7110_SYSCLK_PLL2_OUT), JH71X0__DIV(JH7110_SYSCLK_AUDIO_ROOT, "audio_root", 8, JH7110_SYSCLK_PLL2_OUT), JH71X0__DIV(JH7110_SYSCLK_MCLK_INNER, "mclk_inner", 64, JH7110_SYSCLK_AUDIO_ROOT), - JH71X0__MUX(JH7110_SYSCLK_MCLK, "mclk", 2, + JH71X0__MUX(JH7110_SYSCLK_MCLK, "mclk", 0, 2, JH7110_SYSCLK_MCLK_INNER, JH7110_SYSCLK_MCLK_EXT), JH71X0_GATE(JH7110_SYSCLK_MCLK_OUT, "mclk_out", 0, JH7110_SYSCLK_MCLK_INNER), @@ -96,7 +96,7 @@ static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = { JH71X0__DIV(JH7110_SYSCLK_OSC_DIV2, "osc_div2", 2, JH7110_SYSCLK_OSC), JH71X0__DIV(JH7110_SYSCLK_PLL1_DIV4, "pll1_div4", 2, JH7110_SYSCLK_PLL1_DIV2), JH71X0__DIV(JH7110_SYSCLK_PLL1_DIV8, "pll1_div8", 2, JH7110_SYSCLK_PLL1_DIV4), - JH71X0__MUX(JH7110_SYSCLK_DDR_BUS, "ddr_bus", 4, + JH71X0__MUX(JH7110_SYSCLK_DDR_BUS, "ddr_bus", 0, 4, JH7110_SYSCLK_OSC_DIV2, JH7110_SYSCLK_PLL1_DIV2, JH7110_SYSCLK_PLL1_DIV4, @@ -186,7 +186,7 @@ static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = { JH71X0__DIV(JH7110_SYSCLK_GMAC1_RMII_RTX, "gmac1_rmii_rtx", 30, JH7110_SYSCLK_GMAC1_RMII_REFIN), JH71X0_GDIV(JH7110_SYSCLK_GMAC1_PTP, "gmac1_ptp", 0, 31, JH7110_SYSCLK_GMAC_SRC), - JH71X0__MUX(JH7110_SYSCLK_GMAC1_RX, "gmac1_rx", 2, + JH71X0__MUX(JH7110_SYSCLK_GMAC1_RX, "gmac1_rx", 0, 2, JH7110_SYSCLK_GMAC1_RGMII_RXIN, JH7110_SYSCLK_GMAC1_RMII_RTX), JH71X0__INV(JH7110_SYSCLK_GMAC1_RX_INV, "gmac1_rx_inv", JH7110_SYSCLK_GMAC1_RX), @@ -270,11 +270,11 @@ static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = { JH71X0_MDIV(JH7110_SYSCLK_I2STX0_LRCK_MST, "i2stx0_lrck_mst", 64, 2, JH7110_SYSCLK_I2STX0_BCLK_MST_INV, JH7110_SYSCLK_I2STX0_BCLK_MST), - JH71X0__MUX(JH7110_SYSCLK_I2STX0_BCLK, "i2stx0_bclk", 2, + JH71X0__MUX(JH7110_SYSCLK_I2STX0_BCLK, "i2stx0_bclk", 0, 2, JH7110_SYSCLK_I2STX0_BCLK_MST, JH7110_SYSCLK_I2STX_BCLK_EXT), JH71X0__INV(JH7110_SYSCLK_I2STX0_BCLK_INV, "i2stx0_bclk_inv", JH7110_SYSCLK_I2STX0_BCLK), - JH71X0__MUX(JH7110_SYSCLK_I2STX0_LRCK, "i2stx0_lrck", 2, + JH71X0__MUX(JH7110_SYSCLK_I2STX0_LRCK, "i2stx0_lrck", 0, 2, JH7110_SYSCLK_I2STX0_LRCK_MST, JH7110_SYSCLK_I2STX_LRCK_EXT), /* i2stx1 */ @@ -285,11 +285,11 @@ static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = { JH71X0_MDIV(JH7110_SYSCLK_I2STX1_LRCK_MST, "i2stx1_lrck_mst", 64, 2, JH7110_SYSCLK_I2STX1_BCLK_MST_INV, JH7110_SYSCLK_I2STX1_BCLK_MST), - JH71X0__MUX(JH7110_SYSCLK_I2STX1_BCLK, "i2stx1_bclk", 2, + JH71X0__MUX(JH7110_SYSCLK_I2STX1_BCLK, "i2stx1_bclk", 0, 2, JH7110_SYSCLK_I2STX1_BCLK_MST, JH7110_SYSCLK_I2STX_BCLK_EXT), JH71X0__INV(JH7110_SYSCLK_I2STX1_BCLK_INV, "i2stx1_bclk_inv", JH7110_SYSCLK_I2STX1_BCLK), - JH71X0__MUX(JH7110_SYSCLK_I2STX1_LRCK, "i2stx1_lrck", 2, + JH71X0__MUX(JH7110_SYSCLK_I2STX1_LRCK, "i2stx1_lrck", 0, 2, JH7110_SYSCLK_I2STX1_LRCK_MST, JH7110_SYSCLK_I2STX_LRCK_EXT), /* i2srx */ @@ -300,11 +300,11 @@ static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = { JH71X0_MDIV(JH7110_SYSCLK_I2SRX_LRCK_MST, "i2srx_lrck_mst", 64, 2, JH7110_SYSCLK_I2SRX_BCLK_MST_INV, JH7110_SYSCLK_I2SRX_BCLK_MST), - JH71X0__MUX(JH7110_SYSCLK_I2SRX_BCLK, "i2srx_bclk", 2, + JH71X0__MUX(JH7110_SYSCLK_I2SRX_BCLK, "i2srx_bclk", 0, 2, JH7110_SYSCLK_I2SRX_BCLK_MST, JH7110_SYSCLK_I2SRX_BCLK_EXT), JH71X0__INV(JH7110_SYSCLK_I2SRX_BCLK_INV, "i2srx_bclk_inv", JH7110_SYSCLK_I2SRX_BCLK), - JH71X0__MUX(JH7110_SYSCLK_I2SRX_LRCK, "i2srx_lrck", 2, + JH71X0__MUX(JH7110_SYSCLK_I2SRX_LRCK, "i2srx_lrck", 0, 2, JH7110_SYSCLK_I2SRX_LRCK_MST, JH7110_SYSCLK_I2SRX_LRCK_EXT), /* pdm */ @@ -314,7 +314,7 @@ static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = { JH71X0_GATE(JH7110_SYSCLK_TDM_AHB, "tdm_ahb", 0, JH7110_SYSCLK_AHB0), JH71X0_GATE(JH7110_SYSCLK_TDM_APB, "tdm_apb", 0, JH7110_SYSCLK_APB0), JH71X0_GDIV(JH7110_SYSCLK_TDM_INTERNAL, "tdm_internal", 0, 64, JH7110_SYSCLK_MCLK), - JH71X0__MUX(JH7110_SYSCLK_TDM_TDM, "tdm_tdm", 2, + JH71X0__MUX(JH7110_SYSCLK_TDM_TDM, "tdm_tdm", 0, 2, JH7110_SYSCLK_TDM_INTERNAL, JH7110_SYSCLK_TDM_EXT), JH71X0__INV(JH7110_SYSCLK_TDM_TDM_INV, "tdm_tdm_inv", JH7110_SYSCLK_TDM_TDM), diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h index 34bb11c72eb7..23e052fc1549 100644 --- a/drivers/clk/starfive/clk-starfive-jh71x0.h +++ b/drivers/clk/starfive/clk-starfive-jh71x0.h @@ -61,10 +61,10 @@ struct jh71x0_clk_data { .parents = { [0] = _parent }, \ } -#define JH71X0__MUX(_idx, _name, _nparents, ...) \ +#define JH71X0__MUX(_idx, _name, _flags, _nparents, ...) \ [_idx] = { \ .name = _name, \ - .flags = 0, \ + .flags = _flags, \ .max = ((_nparents) - 1) << JH71X0_CLK_MUX_SHIFT, \ .parents = { __VA_ARGS__ }, \ } diff --git a/include/dt-bindings/clock/sophgo,cv1800.h b/include/dt-bindings/clock/sophgo,cv1800.h new file mode 100644 index 000000000000..cfbeca25a650 --- /dev/null +++ b/include/dt-bindings/clock/sophgo,cv1800.h @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * Copyright (C) 2023 Sophgo Ltd. + */ + +#ifndef __DT_BINDINGS_SOPHGO_CV1800_CLK_H__ +#define __DT_BINDINGS_SOPHGO_CV1800_CLK_H__ + +#define CLK_MPLL 0 +#define CLK_TPLL 1 +#define CLK_FPLL 2 +#define CLK_MIPIMPLL 3 +#define CLK_A0PLL 4 +#define CLK_DISPPLL 5 +#define CLK_CAM0PLL 6 +#define CLK_CAM1PLL 7 + +#define CLK_MIPIMPLL_D3 8 +#define CLK_CAM0PLL_D2 9 +#define CLK_CAM0PLL_D3 10 + +#define CLK_TPU 11 +#define CLK_TPU_FAB 12 +#define CLK_AHB_ROM 13 +#define CLK_DDR_AXI_REG 14 +#define CLK_RTC_25M 15 +#define CLK_SRC_RTC_SYS_0 16 +#define CLK_TEMPSEN 17 +#define CLK_SARADC 18 +#define CLK_EFUSE 19 +#define CLK_APB_EFUSE 20 +#define CLK_DEBUG 21 +#define CLK_AP_DEBUG 22 +#define CLK_XTAL_MISC 23 +#define CLK_AXI4_EMMC 24 +#define CLK_EMMC 25 +#define CLK_EMMC_100K 26 +#define CLK_AXI4_SD0 27 +#define CLK_SD0 28 +#define CLK_SD0_100K 29 +#define CLK_AXI4_SD1 30 +#define CLK_SD1 31 +#define CLK_SD1_100K 32 +#define CLK_SPI_NAND 33 +#define CLK_ETH0_500M 34 +#define CLK_AXI4_ETH0 35 +#define CLK_ETH1_500M 36 +#define CLK_AXI4_ETH1 37 +#define CLK_APB_GPIO 38 +#define CLK_APB_GPIO_INTR 39 +#define CLK_GPIO_DB 40 +#define CLK_AHB_SF 41 +#define CLK_AHB_SF1 42 +#define CLK_A24M 43 +#define CLK_AUDSRC 44 +#define CLK_APB_AUDSRC 45 +#define CLK_SDMA_AXI 46 +#define CLK_SDMA_AUD0 47 +#define CLK_SDMA_AUD1 48 +#define CLK_SDMA_AUD2 49 +#define CLK_SDMA_AUD3 50 +#define CLK_I2C 51 +#define CLK_APB_I2C 52 +#define CLK_APB_I2C0 53 +#define CLK_APB_I2C1 54 +#define CLK_APB_I2C2 55 +#define CLK_APB_I2C3 56 +#define CLK_APB_I2C4 57 +#define CLK_APB_WDT 58 +#define CLK_PWM_SRC 59 +#define CLK_PWM 60 +#define CLK_SPI 61 +#define CLK_APB_SPI0 62 +#define CLK_APB_SPI1 63 +#define CLK_APB_SPI2 64 +#define CLK_APB_SPI3 65 +#define CLK_1M 66 +#define CLK_CAM0_200 67 +#define CLK_PM 68 +#define CLK_TIMER0 69 +#define CLK_TIMER1 70 +#define CLK_TIMER2 71 +#define CLK_TIMER3 72 +#define CLK_TIMER4 73 +#define CLK_TIMER5 74 +#define CLK_TIMER6 75 +#define CLK_TIMER7 76 +#define CLK_UART0 77 +#define CLK_APB_UART0 78 +#define CLK_UART1 79 +#define CLK_APB_UART1 80 +#define CLK_UART2 81 +#define CLK_APB_UART2 82 +#define CLK_UART3 83 +#define CLK_APB_UART3 84 +#define CLK_UART4 85 +#define CLK_APB_UART4 86 +#define CLK_APB_I2S0 87 +#define CLK_APB_I2S1 88 +#define CLK_APB_I2S2 89 +#define CLK_APB_I2S3 90 +#define CLK_AXI4_USB 91 +#define CLK_APB_USB 92 +#define CLK_USB_125M 93 +#define CLK_USB_33K 94 +#define CLK_USB_12M 95 +#define CLK_AXI4 96 +#define CLK_AXI6 97 +#define CLK_DSI_ESC 98 +#define CLK_AXI_VIP 99 +#define CLK_SRC_VIP_SYS_0 100 +#define CLK_SRC_VIP_SYS_1 101 +#define CLK_SRC_VIP_SYS_2 102 +#define CLK_SRC_VIP_SYS_3 103 +#define CLK_SRC_VIP_SYS_4 104 +#define CLK_CSI_BE_VIP 105 +#define CLK_CSI_MAC0_VIP 106 +#define CLK_CSI_MAC1_VIP 107 +#define CLK_CSI_MAC2_VIP 108 +#define CLK_CSI0_RX_VIP 109 +#define CLK_CSI1_RX_VIP 110 +#define CLK_ISP_TOP_VIP 111 +#define CLK_IMG_D_VIP 112 +#define CLK_IMG_V_VIP 113 +#define CLK_SC_TOP_VIP 114 +#define CLK_SC_D_VIP 115 +#define CLK_SC_V1_VIP 116 +#define CLK_SC_V2_VIP 117 +#define CLK_SC_V3_VIP 118 +#define CLK_DWA_VIP 119 +#define CLK_BT_VIP 120 +#define CLK_DISP_VIP 121 +#define CLK_DSI_MAC_VIP 122 +#define CLK_LVDS0_VIP 123 +#define CLK_LVDS1_VIP 124 +#define CLK_PAD_VI_VIP 125 +#define CLK_PAD_VI1_VIP 126 +#define CLK_PAD_VI2_VIP 127 +#define CLK_CFG_REG_VIP 128 +#define CLK_VIP_IP0 129 +#define CLK_VIP_IP1 130 +#define CLK_VIP_IP2 131 +#define CLK_VIP_IP3 132 +#define CLK_IVE_VIP 133 +#define CLK_RAW_VIP 134 +#define CLK_OSDC_VIP 135 +#define CLK_CAM0_VIP 136 +#define CLK_AXI_VIDEO_CODEC 137 +#define CLK_VC_SRC0 138 +#define CLK_VC_SRC1 139 +#define CLK_VC_SRC2 140 +#define CLK_H264C 141 +#define CLK_APB_H264C 142 +#define CLK_H265C 143 +#define CLK_APB_H265C 144 +#define CLK_JPEG 145 +#define CLK_APB_JPEG 146 +#define CLK_CAM0 147 +#define CLK_CAM1 148 +#define CLK_WGN 149 +#define CLK_WGN0 150 +#define CLK_WGN1 151 +#define CLK_WGN2 152 +#define CLK_KEYSCAN 153 +#define CLK_CFG_REG_VC 154 +#define CLK_C906_0 155 +#define CLK_C906_1 156 +#define CLK_A53 157 +#define CLK_CPU_AXI0 158 +#define CLK_CPU_GIC 159 +#define CLK_XTAL_AP 160 + +// Only for CV181x +#define CLK_DISP_SRC_VIP 161 + +#endif /* __DT_BINDINGS_SOPHGO_CV1800_CLK_H__ */ diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index c71a2dd66143..5f412a615532 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -105,10 +105,12 @@ struct si5351_clkout_config { * @clk_xtal: xtal input clock * @clk_clkin: clkin input clock * @pll_src: array of pll source clock setting + * @pll_reset: array indicating if plls should be reset after setting the rate * @clkout: array of clkout configuration */ struct si5351_platform_data { enum si5351_pll_src pll_src[2]; + bool pll_reset[2]; struct si5351_clkout_config clkout[8]; };