iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[PATCH] cpuset memory spread basic implementation

Browse Source 
This patch provides the implementation and cpuset interface for an alternative
memory allocation policy that can be applied to certain kinds of memory
allocations, such as the page cache (file system buffers) and some slab caches
(such as inode caches).

The policy is called "memory spreading." If enabled, it spreads out these
kinds of memory allocations over all the nodes allowed to a task, instead of
preferring to place them on the node where the task is executing.

All other kinds of allocations, including anonymous pages for a tasks stack
and data regions, are not affected by this policy choice, and continue to be
allocated preferring the node local to execution, as modified by the NUMA
mempolicy.

There are two boolean flag files per cpuset that control where the kernel
allocates pages for the file system buffers and related in kernel data
structures.  They are called 'memory_spread_page' and 'memory_spread_slab'.

If the per-cpuset boolean flag file 'memory_spread_page' is set, then the
kernel will spread the file system buffers (page cache) evenly over all the
nodes that the faulting task is allowed to use, instead of preferring to put
those pages on the node where the task is running.

If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the
kernel will spread some file system related slab caches, such as for inodes
and dentries evenly over all the nodes that the faulting task is allowed to
use, instead of preferring to put those pages on the node where the task is
running.

The implementation is simple.  Setting the cpuset flags 'memory_spread_page'
or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or
PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or
subsequently joins that cpuset.  In subsequent patches, the page allocation
calls for the affected page cache and slab caches are modified to perform an
inline check for these flags, and if set, a call to a new routine
cpuset_mem_spread_node() returns the node to prefer for the allocation.

The cpuset_mem_spread_node() routine is also simple.  It uses the value of a
per-task rotor cpuset_mem_spread_rotor to select the next node in the current
tasks mems_allowed to prefer for the allocation.

This policy can provide substantial improvements for jobs that need to place
thread local data on the corresponding node, but that need to access large
file system data sets that need to be spread across the several nodes in the
jobs cpuset in order to fit.  Without this patch, especially for jobs that
might have one thread reading in the data set, the memory allocation across
the nodes in the jobs cpuset can become very uneven.

A couple of Copyright year ranges are updated as well.  And a couple of email
addresses that can be found in the MAINTAINERS file are removed.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Paul Jackson 2006-03-24 03:16:03 -08:00 committed by Linus Torvalds
parent 8a39cc60bf
commit 825a46af5a
4 changed files with 203 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

76
Documentation/cpusets.txt
View File

@ -18,7 +18,8 @@ CONTENTS:
1.4 What are exclusive cpusets ?
1.5 What does notify_on_release do ?
1.6 What is memory_pressure ?
1.7 How do I use cpusets ?
1.7 What is memory spread ?
1.8 How do I use cpusets ?
2. Usage Examples and Syntax
2.1 Basic Usage
2.2 Adding/removing cpus
@ -317,7 +318,78 @@ the tasks in the cpuset, in units of reclaims attempted per second,
times 1000.
1.7 How do I use cpusets ?
1.7 What is memory spread ?
---------------------------
There are two boolean flag files per cpuset that control where the
kernel allocates pages for the file system buffers and related in
kernel data structures. They are called 'memory_spread_page' and
'memory_spread_slab'.
If the per-cpuset boolean flag file 'memory_spread_page' is set, then
the kernel will spread the file system buffers (page cache) evenly
over all the nodes that the faulting task is allowed to use, instead
of preferring to put those pages on the node where the task is running.
If the per-cpuset boolean flag file 'memory_spread_slab' is set,
then the kernel will spread some file system related slab caches,
such as for inodes and dentries evenly over all the nodes that the
faulting task is allowed to use, instead of preferring to put those
pages on the node where the task is running.
The setting of these flags does not affect anonymous data segment or
stack segment pages of a task.
By default, both kinds of memory spreading are off, and memory
pages are allocated on the node local to where the task is running,
except perhaps as modified by the tasks NUMA mempolicy or cpuset
configuration, so long as sufficient free memory pages are available.
When new cpusets are created, they inherit the memory spread settings
of their parent.
Setting memory spreading causes allocations for the affected page
or slab caches to ignore the tasks NUMA mempolicy and be spread
instead. Tasks using mbind() or set_mempolicy() calls to set NUMA
mempolicies will not notice any change in these calls as a result of
their containing tasks memory spread settings. If memory spreading
is turned off, then the currently specified NUMA mempolicy once again
applies to memory page allocations.
Both 'memory_spread_page' and 'memory_spread_slab' are boolean flag
files. By default they contain "0", meaning that the feature is off
for that cpuset. If a "1" is written to that file, then that turns
the named feature on.
The implementation is simple.
Setting the flag 'memory_spread_page' turns on a per-process flag
PF_SPREAD_PAGE for each task that is in that cpuset or subsequently
joins that cpuset. The page allocation calls for the page cache
is modified to perform an inline check for this PF_SPREAD_PAGE task
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
Similarly, setting 'memory_spread_cache' turns on the flag
PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
The cpuset_mem_spread_node() routine is also simple. It uses the
value of a per-task rotor cpuset_mem_spread_rotor to select the next
node in the current tasks mems_allowed to prefer for the allocation.
This memory placement policy is also known (in other contexts) as
round-robin or interleave.
This policy can provide substantial improvements for jobs that need
to place thread local data on the corresponding node, but that need
to access large file system data sets that need to be spread across
the several nodes in the jobs cpuset in order to fit. Without this
policy, especially for jobs that might have one thread reading in the
data set, the memory allocation across the nodes in the jobs cpuset
can become very uneven.
1.8 How do I use cpusets ?
--------------------------
In order to minimize the impact of cpusets on critical kernel

29
include/linux/cpuset.h
View File

@ -4,7 +4,7 @@
* cpuset interface
*
* Copyright (C) 2003 BULL SA
* Copyright (C) 2004 Silicon Graphics, Inc.
* Copyright (C) 2004-2006 Silicon Graphics, Inc.
*
*/
@ -51,6 +51,18 @@ extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer);
extern void cpuset_lock(void);
extern void cpuset_unlock(void);
extern int cpuset_mem_spread_node(void);
static inline int cpuset_do_page_mem_spread(void)
{
return current->flags & PF_SPREAD_PAGE;
}
static inline int cpuset_do_slab_mem_spread(void)
{
return current->flags & PF_SPREAD_SLAB;
}
#else /* !CONFIG_CPUSETS */
static inline int cpuset_init_early(void) { return 0; }
@ -99,6 +111,21 @@ static inline char *cpuset_task_status_allowed(struct task_struct *task,
static inline void cpuset_lock(void) {}
static inline void cpuset_unlock(void) {}
static inline int cpuset_mem_spread_node(void)
{
return 0;
}
static inline int cpuset_do_page_mem_spread(void)
{
return 0;
}
static inline int cpuset_do_slab_mem_spread(void)
{
return 0;
}
#endif /* !CONFIG_CPUSETS */
#endif /* _LINUX_CPUSET_H */

3
include/linux/sched.h
View File

@ -869,6 +869,7 @@ struct task_struct {
struct cpuset *cpuset;
nodemask_t mems_allowed;
int cpuset_mems_generation;
int cpuset_mem_spread_rotor;
#endif
atomic_t fs_excl; /* holding fs exclusive resources */
struct rcu_head rcu;
@ -929,6 +930,8 @@ static inline void put_task_struct(struct task_struct *t)
#define PF_BORROWED_MM 0x00400000 /* I am a kthread doing use_mm */
#define PF_RANDOMIZE 0x00800000 /* randomize virtual address space */
#define PF_SWAPWRITE 0x01000000 /* Allowed to write to swap */
#define PF_SPREAD_PAGE 0x04000000 /* Spread page cache over cpuset */
#define PF_SPREAD_SLAB 0x08000000 /* Spread some slab caches over cpuset */
/*
* Only the _current_ task can read/write to tsk->flags, but other

104
kernel/cpuset.c
View File

@ -4,15 +4,14 @@
* Processor and Memory placement constraints for sets of tasks.
*
* Copyright (C) 2003 BULL SA.
* Copyright (C) 2004 Silicon Graphics, Inc.
* Copyright (C) 2004-2006 Silicon Graphics, Inc.
*
* Portions derived from Patrick Mochel's sysfs code.
* sysfs is Copyright (c) 2001-3 Patrick Mochel
* Portions Copyright (c) 2004 Silicon Graphics, Inc.
*
* 2003-10-10 Written by Simon Derr <simon.derr@bull.net>
* 2003-10-10 Written by Simon Derr.
* 2003-10-22 Updates by Stephen Hemminger.
* 2004 May-July Rework by Paul Jackson <pj@sgi.com>
* 2004 May-July Rework by Paul Jackson.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of the Linux
@ -108,7 +107,9 @@ typedef enum {
CS_MEM_EXCLUSIVE,
CS_MEMORY_MIGRATE,
CS_REMOVED,
CS_NOTIFY_ON_RELEASE
CS_NOTIFY_ON_RELEASE,
CS_SPREAD_PAGE,
CS_SPREAD_SLAB,
} cpuset_flagbits_t;
/* convenient tests for these bits */
@ -137,6 +138,16 @@ static inline int is_memory_migrate(const struct cpuset *cs)
return test_bit(CS_MEMORY_MIGRATE, &cs->flags);
}
static inline int is_spread_page(const struct cpuset *cs)
{
return test_bit(CS_SPREAD_PAGE, &cs->flags);
}
static inline int is_spread_slab(const struct cpuset *cs)
{
return test_bit(CS_SPREAD_SLAB, &cs->flags);
}
/*
* Increment this atomic integer everytime any cpuset changes its
* mems_allowed value. Users of cpusets can track this generation
@ -657,6 +668,14 @@ void cpuset_update_task_memory_state(void)
cs = tsk->cpuset; /* Maybe changed when task not locked */
guarantee_online_mems(cs, &tsk->mems_allowed);
tsk->cpuset_mems_generation = cs->mems_generation;
if (is_spread_page(cs))
tsk->flags |= PF_SPREAD_PAGE;
else
tsk->flags &= ~PF_SPREAD_PAGE;
if (is_spread_slab(cs))
tsk->flags |= PF_SPREAD_SLAB;
else
tsk->flags &= ~PF_SPREAD_SLAB;
task_unlock(tsk);
mutex_unlock(&callback_mutex);
mpol_rebind_task(tsk, &tsk->mems_allowed);
@ -956,7 +975,8 @@ static int update_memory_pressure_enabled(struct cpuset *cs, char *buf)
/*
* update_flag - read a 0 or a 1 in a file and update associated flag
* bit: the bit to update (CS_CPU_EXCLUSIVE, CS_MEM_EXCLUSIVE,
* CS_NOTIFY_ON_RELEASE, CS_MEMORY_MIGRATE)
* CS_NOTIFY_ON_RELEASE, CS_MEMORY_MIGRATE,
* CS_SPREAD_PAGE, CS_SPREAD_SLAB)
* cs: the cpuset to update
* buf: the buffer where we read the 0 or 1
*
@ -1187,6 +1207,8 @@ typedef enum {
FILE_NOTIFY_ON_RELEASE,
FILE_MEMORY_PRESSURE_ENABLED,
FILE_MEMORY_PRESSURE,
FILE_SPREAD_PAGE,
FILE_SPREAD_SLAB,
FILE_TASKLIST,
} cpuset_filetype_t;
@ -1246,6 +1268,14 @@ static ssize_t cpuset_common_file_write(struct file *file, const char __user *us
case FILE_MEMORY_PRESSURE:
retval = -EACCES;
break;
case FILE_SPREAD_PAGE:
retval = update_flag(CS_SPREAD_PAGE, cs, buffer);
cs->mems_generation = atomic_inc_return(&cpuset_mems_generation);
break;
case FILE_SPREAD_SLAB:
retval = update_flag(CS_SPREAD_SLAB, cs, buffer);
cs->mems_generation = atomic_inc_return(&cpuset_mems_generation);
break;
case FILE_TASKLIST:
retval = attach_task(cs, buffer, &pathbuf);
break;
@ -1355,6 +1385,12 @@ static ssize_t cpuset_common_file_read(struct file *file, char __user *buf,
case FILE_MEMORY_PRESSURE:
s += sprintf(s, "%d", fmeter_getrate(&cs->fmeter));
break;
case FILE_SPREAD_PAGE:
*s++ = is_spread_page(cs) ? '1' : '0';
break;
case FILE_SPREAD_SLAB:
*s++ = is_spread_slab(cs) ? '1' : '0';
break;
default:
retval = -EINVAL;
goto out;
@ -1718,6 +1754,16 @@ static struct cftype cft_memory_pressure = {
.private = FILE_MEMORY_PRESSURE,
};
static struct cftype cft_spread_page = {
.name = "memory_spread_page",
.private = FILE_SPREAD_PAGE,
};
static struct cftype cft_spread_slab = {
.name = "memory_spread_slab",
.private = FILE_SPREAD_SLAB,
};
static int cpuset_populate_dir(struct dentry *cs_dentry)
{
int err;
@ -1736,6 +1782,10 @@ static int cpuset_populate_dir(struct dentry *cs_dentry)
return err;
if ((err = cpuset_add_file(cs_dentry, &cft_memory_pressure)) < 0)
return err;
if ((err = cpuset_add_file(cs_dentry, &cft_spread_page)) < 0)
return err;
if ((err = cpuset_add_file(cs_dentry, &cft_spread_slab)) < 0)
return err;
if ((err = cpuset_add_file(cs_dentry, &cft_tasks)) < 0)
return err;
return 0;
@ -1764,6 +1814,10 @@ static long cpuset_create(struct cpuset *parent, const char *name, int mode)
cs->flags = 0;
if (notify_on_release(parent))
set_bit(CS_NOTIFY_ON_RELEASE, &cs->flags);
if (is_spread_page(parent))
set_bit(CS_SPREAD_PAGE, &cs->flags);
if (is_spread_slab(parent))
set_bit(CS_SPREAD_SLAB, &cs->flags);
cs->cpus_allowed = CPU_MASK_NONE;
cs->mems_allowed = NODE_MASK_NONE;
atomic_set(&cs->count, 0);
@ -2200,6 +2254,44 @@ void cpuset_unlock(void)
mutex_unlock(&callback_mutex);
}
/**
* cpuset_mem_spread_node() - On which node to begin search for a page
*
* If a task is marked PF_SPREAD_PAGE or PF_SPREAD_SLAB (as for
* tasks in a cpuset with is_spread_page or is_spread_slab set),
* and if the memory allocation used cpuset_mem_spread_node()
* to determine on which node to start looking, as it will for
* certain page cache or slab cache pages such as used for file
* system buffers and inode caches, then instead of starting on the
* local node to look for a free page, rather spread the starting
* node around the tasks mems_allowed nodes.
*
* We don't have to worry about the returned node being offline
* because "it can't happen", and even if it did, it would be ok.
*
* The routines calling guarantee_online_mems() are careful to
* only set nodes in task->mems_allowed that are online. So it
* should not be possible for the following code to return an
* offline node. But if it did, that would be ok, as this routine
* is not returning the node where the allocation must be, only
* the node where the search should start. The zonelist passed to
* __alloc_pages() will include all nodes. If the slab allocator
* is passed an offline node, it will fall back to the local node.
* See kmem_cache_alloc_node().
*/
int cpuset_mem_spread_node(void)
{
int node;
node = next_node(current->cpuset_mem_spread_rotor, current->mems_allowed);
if (node == MAX_NUMNODES)
node = first_node(current->mems_allowed);
current->cpuset_mem_spread_rotor = node;
return node;
}
EXPORT_SYMBOL_GPL(cpuset_mem_spread_node);
/**
* cpuset_excl_nodes_overlap - Do we overlap @p's mem_exclusive ancestors?
* @p: pointer to task_struct of some other task.