iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[media] tvp5150: document input connectors DT bindings

Browse Source 
The tvp5150 decoder has different input connectors so extend the device
tree binding to allow device tree source files to define the connectors
that are available on a given board.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This commit is contained in:
Javier Martinez Canillas 2016-02-05 17:09:57 -02:00 committed by Mauro Carvalho Chehab
parent b802fb99ae
commit 82c2ffeb21
1 changed files with 43 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
Documentation/devicetree/bindings/media/i2c/tvp5150.txt
View File

@ -12,6 +12,32 @@ Optional Properties:
- pdn-gpios: phandle for the GPIO connected to the PDN pin, if any.
- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
Optional nodes:
- connectors: The input connectors of tvp5150 have to be defined under
a subnode name "connectors" using the following format:
input-connector-name {
input connector properties
};
Each input connector must contain the following properties:
- label: a name for the connector.
- input: the input connector.
The possible values for the "input" property are:
0: Composite0
1: Composite1
2: S-Video
and on a tvp5150am1 and tvp5151 there is another:
4: Signal generator
The list of valid input connectors are defined in dt-bindings/media/tvp5150.h
header file and can be included by device tree source files.
Each input connector can be defined only once.
The device node must contain one 'port' child node for its digital output
video port, in accordance with the video interface bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
@ -36,6 +62,23 @@ Example:
pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
connectors {
composite0 {
label = "Composite0";
input = <TVP5150_COMPOSITE0>;
};
composite1 {
label = "Composite1";
input = <TVP5150_COMPOSITE1>;
};
s-video {
label = "S-Video";
input = <TVP5150_SVIDEO>;
};
};
port {
tvp5150_1: endpoint {
remote-endpoint = <&ccdc_ep>;