selftests: mirror: do_test_span_dir_ips(): Install accurate taps
The mirroring selftests work by sending ICMP traffic between two hosts. Along the way, this traffic is mirrored to a gretap netdevice, and counter taps are then installed strategically along the path of the mirrored traffic to verify the mirroring took place. The problem with this is that besides mirroring the primary traffic, any other service traffic is mirrored as well. At the same time, because the tests need to work in HW-offloaded scenarios, the ability of the device to do arbitrary packet inspection should not be taken for granted. Most tests therefore simply use matchall, one uses flower to match on IP address. As a result, the selftests are noisy, because besides the primary ICMP traffic, any amount of other service traffic is mirrored as well. However, often the counter tap is installed at the remote end of the gretap tunnel. Since this is a SW-datapath scenario anyway, we can make the filter arbitrarily accurate. Thus in this patch, add parameters forward_type and backward_type to several mirroring test helpers, as some other helpers already have. Then change do_test_span_dir_ips() to instead of installing one generic tap and using it for test in both directions, install the tap for each direction separately, matching on the ICMP type given by these parameters. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
95e7b860e1
commit
833415358f
@ -91,17 +91,17 @@ test_two_spans()
|
||||
|
||||
mirror_install $swp1 ingress gt4 "matchall $tcflags"
|
||||
mirror_install $swp1 egress gt6 "matchall $tcflags"
|
||||
quick_test_span_gre_dir gt4
|
||||
quick_test_span_gre_dir gt6
|
||||
quick_test_span_gre_dir gt4 8 0
|
||||
quick_test_span_gre_dir gt6 0 8
|
||||
|
||||
mirror_uninstall $swp1 ingress
|
||||
fail_test_span_gre_dir gt4
|
||||
quick_test_span_gre_dir gt6
|
||||
fail_test_span_gre_dir gt4 8 0
|
||||
quick_test_span_gre_dir gt6 0 8
|
||||
|
||||
mirror_install $swp1 ingress gt4 "matchall $tcflags"
|
||||
mirror_uninstall $swp1 egress
|
||||
quick_test_span_gre_dir gt4
|
||||
fail_test_span_gre_dir gt6
|
||||
quick_test_span_gre_dir gt4 8 0
|
||||
fail_test_span_gre_dir gt6 0 8
|
||||
|
||||
mirror_uninstall $swp1 ingress
|
||||
log_test "two simultaneously configured mirrors ($tcflags)"
|
||||
|
@ -7,8 +7,11 @@ quick_test_span_gre_dir_ips()
|
||||
local tundev=$1; shift
|
||||
local ip1=$1; shift
|
||||
local ip2=$1; shift
|
||||
local forward_type=$1; shift
|
||||
local backward_type=$1; shift
|
||||
|
||||
do_test_span_dir_ips 10 h3-$tundev "$ip1" "$ip2"
|
||||
do_test_span_dir_ips 10 h3-$tundev "$ip1" "$ip2" \
|
||||
"$forward_type" "$backward_type"
|
||||
}
|
||||
|
||||
fail_test_span_gre_dir_ips()
|
||||
@ -84,8 +87,11 @@ full_test_span_gre_dir_vlan_ips()
|
||||
quick_test_span_gre_dir()
|
||||
{
|
||||
local tundev=$1; shift
|
||||
local forward_type=${1-8}; shift
|
||||
local backward_type=${1-0}; shift
|
||||
|
||||
quick_test_span_gre_dir_ips "$tundev" 192.0.2.1 192.0.2.2
|
||||
quick_test_span_gre_dir_ips "$tundev" 192.0.2.1 192.0.2.2 \
|
||||
"$forward_type" "$backward_type"
|
||||
}
|
||||
|
||||
fail_test_span_gre_dir()
|
||||
@ -139,12 +145,15 @@ full_test_span_gre_stp_ips()
|
||||
local what=$1; shift
|
||||
local ip1=$1; shift
|
||||
local ip2=$1; shift
|
||||
local forward_type=$1; shift
|
||||
local backward_type=$1; shift
|
||||
local h3mac=$(mac_get $h3)
|
||||
|
||||
RET=0
|
||||
|
||||
mirror_install $swp1 ingress $tundev "matchall $tcflags"
|
||||
quick_test_span_gre_dir_ips $tundev $ip1 $ip2
|
||||
quick_test_span_gre_dir_ips $tundev $ip1 $ip2 \
|
||||
"$forward_type" "$backward_type"
|
||||
|
||||
bridge link set dev $nbpdev state disabled
|
||||
sleep 1
|
||||
@ -152,7 +161,8 @@ full_test_span_gre_stp_ips()
|
||||
|
||||
bridge link set dev $nbpdev state forwarding
|
||||
sleep 1
|
||||
quick_test_span_gre_dir_ips $tundev $ip1 $ip2
|
||||
quick_test_span_gre_dir_ips $tundev $ip1 $ip2 \
|
||||
"$forward_type" "$backward_type"
|
||||
|
||||
mirror_uninstall $swp1 ingress
|
||||
|
||||
@ -164,7 +174,10 @@ full_test_span_gre_stp()
|
||||
local tundev=$1; shift
|
||||
local nbpdev=$1; shift
|
||||
local what=$1; shift
|
||||
local forward_type=${1-8}; shift
|
||||
local backward_type=${1-0}; shift
|
||||
|
||||
full_test_span_gre_stp_ips "$tundev" "$nbpdev" "$what" \
|
||||
192.0.2.1 192.0.2.2
|
||||
192.0.2.1 192.0.2.2 \
|
||||
"$forward_type" "$backward_type"
|
||||
}
|
||||
|
@ -60,15 +60,17 @@ test_span_gre_neigh()
|
||||
local addr=$1; shift
|
||||
local tundev=$1; shift
|
||||
local direction=$1; shift
|
||||
local forward_type=$1; shift
|
||||
local backward_type=$1; shift
|
||||
local what=$1; shift
|
||||
|
||||
RET=0
|
||||
|
||||
ip neigh replace dev $swp3 $addr lladdr 00:11:22:33:44:55
|
||||
mirror_install $swp1 $direction $tundev "matchall $tcflags"
|
||||
fail_test_span_gre_dir $tundev
|
||||
fail_test_span_gre_dir $tundev "$forward_type" "$backward_type"
|
||||
ip neigh del dev $swp3 $addr
|
||||
quick_test_span_gre_dir $tundev
|
||||
quick_test_span_gre_dir $tundev "$forward_type" "$backward_type"
|
||||
mirror_uninstall $swp1 $direction
|
||||
|
||||
log_test "$direction $what: neighbor change ($tcflags)"
|
||||
@ -76,14 +78,14 @@ test_span_gre_neigh()
|
||||
|
||||
test_gretap()
|
||||
{
|
||||
test_span_gre_neigh 192.0.2.130 gt4 ingress "mirror to gretap"
|
||||
test_span_gre_neigh 192.0.2.130 gt4 egress "mirror to gretap"
|
||||
test_span_gre_neigh 192.0.2.130 gt4 ingress 8 0 "mirror to gretap"
|
||||
test_span_gre_neigh 192.0.2.130 gt4 egress 0 8 "mirror to gretap"
|
||||
}
|
||||
|
||||
test_ip6gretap()
|
||||
{
|
||||
test_span_gre_neigh 2001:db8:2::2 gt6 ingress "mirror to ip6gretap"
|
||||
test_span_gre_neigh 2001:db8:2::2 gt6 egress "mirror to ip6gretap"
|
||||
test_span_gre_neigh 2001:db8:2::2 gt6 ingress 8 0 "mirror to ip6gretap"
|
||||
test_span_gre_neigh 2001:db8:2::2 gt6 egress 0 8 "mirror to ip6gretap"
|
||||
}
|
||||
|
||||
test_all()
|
||||
|
@ -61,9 +61,14 @@ do_test_span_dir_ips()
|
||||
local dev=$1; shift
|
||||
local ip1=$1; shift
|
||||
local ip2=$1; shift
|
||||
local forward_type=${1-8}; shift
|
||||
local backward_type=${1-0}; shift
|
||||
|
||||
icmp_capture_install $dev
|
||||
icmp_capture_install $dev "type $forward_type"
|
||||
mirror_test v$h1 $ip1 $ip2 $dev 100 $expect
|
||||
icmp_capture_uninstall $dev
|
||||
|
||||
icmp_capture_install $dev "type $backward_type"
|
||||
mirror_test v$h2 $ip2 $ip1 $dev 100 $expect
|
||||
icmp_capture_uninstall $dev
|
||||
}
|
||||
@ -73,8 +78,11 @@ quick_test_span_dir_ips()
|
||||
local dev=$1; shift
|
||||
local ip1=$1; shift
|
||||
local ip2=$1; shift
|
||||
local forward_type=${1-8}; shift
|
||||
local backward_type=${1-0}; shift
|
||||
|
||||
do_test_span_dir_ips 10 "$dev" "$ip1" "$ip2"
|
||||
do_test_span_dir_ips 10 "$dev" "$ip1" "$ip2" \
|
||||
"$forward_type" "$backward_type"
|
||||
}
|
||||
|
||||
fail_test_span_dir_ips()
|
||||
@ -95,7 +103,8 @@ test_span_dir_ips()
|
||||
local ip1=$1; shift
|
||||
local ip2=$1; shift
|
||||
|
||||
quick_test_span_dir_ips "$dev" "$ip1" "$ip2"
|
||||
quick_test_span_dir_ips "$dev" "$ip1" "$ip2" \
|
||||
"$forward_type" "$backward_type"
|
||||
|
||||
icmp_capture_install $dev "type $forward_type"
|
||||
mirror_test v$h1 $ip1 $ip2 $dev 100 10
|
||||
|
Loading…
x
Reference in New Issue
Block a user