diff --git a/tools/testing/selftests/powerpc/nx-gzip/Makefile b/tools/testing/selftests/powerpc/nx-gzip/Makefile index 016e528a0a94..640fad6cc2c7 100644 --- a/tools/testing/selftests/powerpc/nx-gzip/Makefile +++ b/tools/testing/selftests/powerpc/nx-gzip/Makefile @@ -1,6 +1,6 @@ CFLAGS = -O3 -m64 -I./include -TEST_GEN_FILES := gzfht_test +TEST_GEN_FILES := gzfht_test gunz_test TEST_PROGS := nx-gzip-test.sh include ../../lib.mk diff --git a/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c b/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c new file mode 100644 index 000000000000..6ee0fded0391 --- /dev/null +++ b/tools/testing/selftests/powerpc/nx-gzip/gunz_test.c @@ -0,0 +1,1028 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +/* P9 gunzip sample code for demonstrating the P9 NX hardware + * interface. Not intended for productive uses or for performance or + * compression ratio measurements. Note also that /dev/crypto/gzip, + * VAS and skiboot support are required + * + * Copyright 2020 IBM Corp. + * + * Author: Bulent Abali + * + * https://github.com/libnxz/power-gzip for zlib api and other utils + * Definitions of acronyms used here. See + * P9 NX Gzip Accelerator User's Manual for details: + * https://github.com/libnxz/power-gzip/blob/develop/doc/power_nx_gzip_um.pdf + * + * adler/crc: 32 bit checksums appended to stream tail + * ce: completion extension + * cpb: coprocessor parameter block (metadata) + * crb: coprocessor request block (command) + * csb: coprocessor status block (status) + * dht: dynamic huffman table + * dde: data descriptor element (address, length) + * ddl: list of ddes + * dh/fh: dynamic and fixed huffman types + * fc: coprocessor function code + * histlen: history/dictionary length + * history: sliding window of up to 32KB of data + * lzcount: Deflate LZ symbol counts + * rembytecnt: remaining byte count + * sfbt: source final block type; last block's type during decomp + * spbc: source processed byte count + * subc: source unprocessed bit count + * tebc: target ending bit count; valid bits in the last byte + * tpbc: target processed byte count + * vas: virtual accelerator switch; the user mode interface + */ + +#define _ISOC11_SOURCE // For aligned_alloc() +#define _DEFAULT_SOURCE // For endian.h + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "nxu.h" +#include "nx.h" +#include "crb.h" + +int nx_dbg; +FILE *nx_gzip_log; + +#define NX_MIN(X, Y) (((X) < (Y))?(X):(Y)) +#define NX_MAX(X, Y) (((X) > (Y))?(X):(Y)) + +#define GETINPC(X) fgetc(X) +#define FNAME_MAX 1024 + +/* fifo queue management */ +#define fifo_used_bytes(used) (used) +#define fifo_free_bytes(used, len) ((len)-(used)) +/* amount of free bytes in the first and last parts */ +#define fifo_free_first_bytes(cur, used, len) ((((cur)+(used)) <= (len)) \ + ? (len)-((cur)+(used)) : 0) +#define fifo_free_last_bytes(cur, used, len) ((((cur)+(used)) <= (len)) \ + ? (cur) : (len)-(used)) +/* amount of used bytes in the first and last parts */ +#define fifo_used_first_bytes(cur, used, len) ((((cur)+(used)) <= (len)) \ + ? (used) : (len)-(cur)) +#define fifo_used_last_bytes(cur, used, len) ((((cur)+(used)) <= (len)) \ + ? 0 : ((used)+(cur))-(len)) +/* first and last free parts start here */ +#define fifo_free_first_offset(cur, used) ((cur)+(used)) +#define fifo_free_last_offset(cur, used, len) \ + fifo_used_last_bytes(cur, used, len) +/* first and last used parts start here */ +#define fifo_used_first_offset(cur) (cur) +#define fifo_used_last_offset(cur) (0) + +const int fifo_in_len = 1<<24; +const int fifo_out_len = 1<<24; +const int page_sz = 1<<16; +const int line_sz = 1<<7; +const int window_max = 1<<15; + +/* + * Adds an (address, len) pair to the list of ddes (ddl) and updates + * the base dde. ddl[0] is the only dde in a direct dde which + * contains a single (addr,len) pair. For more pairs, ddl[0] becomes + * the indirect (base) dde that points to a list of direct ddes. + * See Section 6.4 of the NX-gzip user manual for DDE description. + * Addr=NULL, len=0 clears the ddl[0]. Returns the total number of + * bytes in ddl. Caller is responsible for allocting the array of + * nx_dde_t *ddl. If N addresses are required in the scatter-gather + * list, the ddl array must have N+1 entries minimum. + */ +static inline uint32_t nx_append_dde(struct nx_dde_t *ddl, void *addr, + uint32_t len) +{ + uint32_t ddecnt; + uint32_t bytes; + + if (addr == NULL && len == 0) { + clearp_dde(ddl); + return 0; + } + + NXPRT(fprintf(stderr, "%d: %s addr %p len %x\n", __LINE__, addr, + __func__, len)); + + /* Number of ddes in the dde list ; == 0 when it is a direct dde */ + ddecnt = getpnn(ddl, dde_count); + bytes = getp32(ddl, ddebc); + + if (ddecnt == 0 && bytes == 0) { + /* First dde is unused; make it a direct dde */ + bytes = len; + putp32(ddl, ddebc, bytes); + putp64(ddl, ddead, (uint64_t) addr); + } else if (ddecnt == 0) { + /* Converting direct to indirect dde + * ddl[0] becomes head dde of ddl + * copy direct to indirect first. + */ + ddl[1] = ddl[0]; + + /* Add the new dde next */ + clear_dde(ddl[2]); + put32(ddl[2], ddebc, len); + put64(ddl[2], ddead, (uint64_t) addr); + + /* Ddl head points to 2 direct ddes */ + ddecnt = 2; + putpnn(ddl, dde_count, ddecnt); + bytes = bytes + len; + putp32(ddl, ddebc, bytes); + /* Pointer to the first direct dde */ + putp64(ddl, ddead, (uint64_t) &ddl[1]); + } else { + /* Append a dde to an existing indirect ddl */ + ++ddecnt; + clear_dde(ddl[ddecnt]); + put64(ddl[ddecnt], ddead, (uint64_t) addr); + put32(ddl[ddecnt], ddebc, len); + + putpnn(ddl, dde_count, ddecnt); + bytes = bytes + len; + putp32(ddl, ddebc, bytes); /* byte sum of all dde */ + } + return bytes; +} + +/* + * Touch specified number of pages represented in number bytes + * beginning from the first buffer in a dde list. + * Do not touch the pages past buf_sz-th byte's page. + * + * Set buf_sz = 0 to touch all pages described by the ddep. + */ +static int nx_touch_pages_dde(struct nx_dde_t *ddep, long buf_sz, long page_sz, + int wr) +{ + uint32_t indirect_count; + uint32_t buf_len; + long total; + uint64_t buf_addr; + struct nx_dde_t *dde_list; + int i; + + assert(!!ddep); + + indirect_count = getpnn(ddep, dde_count); + + NXPRT(fprintf(stderr, "%s dde_count %d request len ", __func__, + indirect_count)); + NXPRT(fprintf(stderr, "0x%lx\n", buf_sz)); + + if (indirect_count == 0) { + /* Direct dde */ + buf_len = getp32(ddep, ddebc); + buf_addr = getp64(ddep, ddead); + + NXPRT(fprintf(stderr, "touch direct ddebc 0x%x ddead %p\n", + buf_len, (void *)buf_addr)); + + if (buf_sz == 0) + nxu_touch_pages((void *)buf_addr, buf_len, page_sz, wr); + else + nxu_touch_pages((void *)buf_addr, NX_MIN(buf_len, + buf_sz), page_sz, wr); + + return ERR_NX_OK; + } + + /* Indirect dde */ + if (indirect_count > MAX_DDE_COUNT) + return ERR_NX_EXCESSIVE_DDE; + + /* First address of the list */ + dde_list = (struct nx_dde_t *) getp64(ddep, ddead); + + if (buf_sz == 0) + buf_sz = getp32(ddep, ddebc); + + total = 0; + for (i = 0; i < indirect_count; i++) { + buf_len = get32(dde_list[i], ddebc); + buf_addr = get64(dde_list[i], ddead); + total += buf_len; + + NXPRT(fprintf(stderr, "touch loop len 0x%x ddead %p total ", + buf_len, (void *)buf_addr)); + NXPRT(fprintf(stderr, "0x%lx\n", total)); + + /* Touching fewer pages than encoded in the ddebc */ + if (total > buf_sz) { + buf_len = NX_MIN(buf_len, total - buf_sz); + nxu_touch_pages((void *)buf_addr, buf_len, page_sz, wr); + NXPRT(fprintf(stderr, "touch loop break len 0x%x ", + buf_len)); + NXPRT(fprintf(stderr, "ddead %p\n", (void *)buf_addr)); + break; + } + nxu_touch_pages((void *)buf_addr, buf_len, page_sz, wr); + } + return ERR_NX_OK; +} + +/* + * Src and dst buffers are supplied in scatter gather lists. + * NX function code and other parameters supplied in cmdp. + */ +static int nx_submit_job(struct nx_dde_t *src, struct nx_dde_t *dst, + struct nx_gzip_crb_cpb_t *cmdp, void *handle) +{ + uint64_t csbaddr; + + memset((void *)&cmdp->crb.csb, 0, sizeof(cmdp->crb.csb)); + + cmdp->crb.source_dde = *src; + cmdp->crb.target_dde = *dst; + + /* Status, output byte count in tpbc */ + csbaddr = ((uint64_t) &cmdp->crb.csb) & csb_address_mask; + put64(cmdp->crb, csb_address, csbaddr); + + /* NX reports input bytes in spbc; cleared */ + cmdp->cpb.out_spbc_comp_wrap = 0; + cmdp->cpb.out_spbc_comp_with_count = 0; + cmdp->cpb.out_spbc_decomp = 0; + + /* Clear output */ + put32(cmdp->cpb, out_crc, INIT_CRC); + put32(cmdp->cpb, out_adler, INIT_ADLER); + + /* Submit the crb, the job descriptor, to the accelerator. */ + return nxu_submit_job(cmdp, handle); +} + +int decompress_file(int argc, char **argv, void *devhandle) +{ + FILE *inpf = NULL; + FILE *outf = NULL; + + int c, expect, i, cc, rc = 0; + char gzfname[FNAME_MAX]; + + /* Queuing, file ops, byte counting */ + char *fifo_in, *fifo_out; + int used_in, cur_in, used_out, cur_out, read_sz, n; + int first_free, last_free, first_used, last_used; + int first_offset, last_offset; + int write_sz, free_space, source_sz; + int source_sz_estimate, target_sz_estimate; + uint64_t last_comp_ratio = 0; /* 1000 max */ + uint64_t total_out = 0; + int is_final, is_eof; + + /* nx hardware */ + int sfbt, subc, spbc, tpbc, nx_ce, fc, resuming = 0; + int history_len = 0; + struct nx_gzip_crb_cpb_t cmd, *cmdp; + struct nx_dde_t *ddl_in; + struct nx_dde_t dde_in[6] __aligned(128); + struct nx_dde_t *ddl_out; + struct nx_dde_t dde_out[6] __aligned(128); + int pgfault_retries; + + /* when using mmap'ed files */ + off_t input_file_offset; + + if (argc > 2) { + fprintf(stderr, "usage: %s or stdin\n", argv[0]); + fprintf(stderr, " writes to stdout or .nx.gunzip\n"); + return -1; + } + + if (argc == 1) { + inpf = stdin; + outf = stdout; + } else if (argc == 2) { + char w[1024]; + char *wp; + + inpf = fopen(argv[1], "r"); + if (inpf == NULL) { + perror(argv[1]); + return -1; + } + + /* Make a new file name to write to. Ignoring '.gz' */ + wp = (NULL != (wp = strrchr(argv[1], '/'))) ? (wp+1) : argv[1]; + strcpy(w, wp); + strcat(w, ".nx.gunzip"); + + outf = fopen(w, "w"); + if (outf == NULL) { + perror(w); + return -1; + } + } + + /* Decode the gzip header */ + c = GETINPC(inpf); expect = 0x1f; /* ID1 */ + if (c != expect) + goto err1; + + c = GETINPC(inpf); expect = 0x8b; /* ID2 */ + if (c != expect) + goto err1; + + c = GETINPC(inpf); expect = 0x08; /* CM */ + if (c != expect) + goto err1; + + int flg = GETINPC(inpf); /* FLG */ + + if (flg & 0xE0 || flg & 0x4 || flg == EOF) + goto err2; + + fprintf(stderr, "gzHeader FLG %x\n", flg); + + /* Read 6 bytes; ignoring the MTIME, XFL, OS fields in this + * sample code. + */ + for (i = 0; i < 6; i++) { + char tmp[10]; + + tmp[i] = GETINPC(inpf); + if (tmp[i] == EOF) + goto err3; + fprintf(stderr, "%02x ", tmp[i]); + if (i == 5) + fprintf(stderr, "\n"); + } + fprintf(stderr, "gzHeader MTIME, XFL, OS ignored\n"); + + /* FNAME */ + if (flg & 0x8) { + int k = 0; + + do { + c = GETINPC(inpf); + if (c == EOF || k >= FNAME_MAX) + goto err3; + gzfname[k++] = c; + } while (c); + fprintf(stderr, "gzHeader FNAME: %s\n", gzfname); + } + + /* FHCRC */ + if (flg & 0x2) { + c = GETINPC(inpf); + if (c == EOF) + goto err3; + c = GETINPC(inpf); + if (c == EOF) + goto err3; + fprintf(stderr, "gzHeader FHCRC: ignored\n"); + } + + used_in = cur_in = used_out = cur_out = 0; + is_final = is_eof = 0; + + /* Allocate one page larger to prevent page faults due to NX + * overfetching. + * Either do this (char*)(uintptr_t)aligned_alloc or use + * -std=c11 flag to make the int-to-pointer warning go away. + */ + assert((fifo_in = (char *)(uintptr_t)aligned_alloc(line_sz, + fifo_in_len + page_sz)) != NULL); + assert((fifo_out = (char *)(uintptr_t)aligned_alloc(line_sz, + fifo_out_len + page_sz + line_sz)) != NULL); + /* Leave unused space due to history rounding rules */ + fifo_out = fifo_out + line_sz; + nxu_touch_pages(fifo_out, fifo_out_len, page_sz, 1); + + ddl_in = &dde_in[0]; + ddl_out = &dde_out[0]; + cmdp = &cmd; + memset(&cmdp->crb, 0, sizeof(cmdp->crb)); + +read_state: + + /* Read from .gz file */ + + NXPRT(fprintf(stderr, "read_state:\n")); + + if (is_eof != 0) + goto write_state; + + /* We read in to fifo_in in two steps: first: read in to from + * cur_in to the end of the buffer. last: if free space wrapped + * around, read from fifo_in offset 0 to offset cur_in. + */ + + /* Reset fifo head to reduce unnecessary wrap arounds */ + cur_in = (used_in == 0) ? 0 : cur_in; + + /* Free space total is reduced by a gap */ + free_space = NX_MAX(0, fifo_free_bytes(used_in, fifo_in_len) + - line_sz); + + /* Free space may wrap around as first and last */ + first_free = fifo_free_first_bytes(cur_in, used_in, fifo_in_len); + last_free = fifo_free_last_bytes(cur_in, used_in, fifo_in_len); + + /* Start offsets of the free memory */ + first_offset = fifo_free_first_offset(cur_in, used_in); + last_offset = fifo_free_last_offset(cur_in, used_in, fifo_in_len); + + /* Reduce read_sz because of the line_sz gap */ + read_sz = NX_MIN(free_space, first_free); + n = 0; + if (read_sz > 0) { + /* Read in to offset cur_in + used_in */ + n = fread(fifo_in + first_offset, 1, read_sz, inpf); + used_in = used_in + n; + free_space = free_space - n; + assert(n <= read_sz); + if (n != read_sz) { + /* Either EOF or error; exit the read loop */ + is_eof = 1; + goto write_state; + } + } + + /* If free space wrapped around */ + if (last_free > 0) { + /* Reduce read_sz because of the line_sz gap */ + read_sz = NX_MIN(free_space, last_free); + n = 0; + if (read_sz > 0) { + n = fread(fifo_in + last_offset, 1, read_sz, inpf); + used_in = used_in + n; /* Increase used space */ + free_space = free_space - n; /* Decrease free space */ + assert(n <= read_sz); + if (n != read_sz) { + /* Either EOF or error; exit the read loop */ + is_eof = 1; + goto write_state; + } + } + } + + /* At this point we have used_in bytes in fifo_in with the + * data head starting at cur_in and possibly wrapping around. + */ + +write_state: + + /* Write decompressed data to output file */ + + NXPRT(fprintf(stderr, "write_state:\n")); + + if (used_out == 0) + goto decomp_state; + + /* If fifo_out has data waiting, write it out to the file to + * make free target space for the accelerator used bytes in + * the first and last parts of fifo_out. + */ + + first_used = fifo_used_first_bytes(cur_out, used_out, fifo_out_len); + last_used = fifo_used_last_bytes(cur_out, used_out, fifo_out_len); + + write_sz = first_used; + + n = 0; + if (write_sz > 0) { + n = fwrite(fifo_out + cur_out, 1, write_sz, outf); + used_out = used_out - n; + /* Move head of the fifo */ + cur_out = (cur_out + n) % fifo_out_len; + assert(n <= write_sz); + if (n != write_sz) { + fprintf(stderr, "error: write\n"); + rc = -1; + goto err5; + } + } + + if (last_used > 0) { /* If more data available in the last part */ + write_sz = last_used; /* Keep it here for later */ + n = 0; + if (write_sz > 0) { + n = fwrite(fifo_out, 1, write_sz, outf); + used_out = used_out - n; + cur_out = (cur_out + n) % fifo_out_len; + assert(n <= write_sz); + if (n != write_sz) { + fprintf(stderr, "error: write\n"); + rc = -1; + goto err5; + } + } + } + +decomp_state: + + /* NX decompresses input data */ + + NXPRT(fprintf(stderr, "decomp_state:\n")); + + if (is_final) + goto finish_state; + + /* Address/len lists */ + clearp_dde(ddl_in); + clearp_dde(ddl_out); + + /* FC, CRC, HistLen, Table 6-6 */ + if (resuming) { + /* Resuming a partially decompressed input. + * The key to resume is supplying the 32KB + * dictionary (history) to NX, which is basically + * the last 32KB of output produced. + */ + fc = GZIP_FC_DECOMPRESS_RESUME; + + cmdp->cpb.in_crc = cmdp->cpb.out_crc; + cmdp->cpb.in_adler = cmdp->cpb.out_adler; + + /* Round up the history size to quadword. Section 2.10 */ + history_len = (history_len + 15) / 16; + putnn(cmdp->cpb, in_histlen, history_len); + history_len = history_len * 16; /* bytes */ + + if (history_len > 0) { + /* Chain in the history buffer to the DDE list */ + if (cur_out >= history_len) { + nx_append_dde(ddl_in, fifo_out + + (cur_out - history_len), + history_len); + } else { + nx_append_dde(ddl_in, fifo_out + + ((fifo_out_len + cur_out) + - history_len), + history_len - cur_out); + /* Up to 32KB history wraps around fifo_out */ + nx_append_dde(ddl_in, fifo_out, cur_out); + } + + } + } else { + /* First decompress job */ + fc = GZIP_FC_DECOMPRESS; + + history_len = 0; + /* Writing 0 clears out subc as well */ + cmdp->cpb.in_histlen = 0; + total_out = 0; + + put32(cmdp->cpb, in_crc, INIT_CRC); + put32(cmdp->cpb, in_adler, INIT_ADLER); + put32(cmdp->cpb, out_crc, INIT_CRC); + put32(cmdp->cpb, out_adler, INIT_ADLER); + + /* Assuming 10% compression ratio initially; use the + * most recently measured compression ratio as a + * heuristic to estimate the input and output + * sizes. If we give too much input, the target buffer + * overflows and NX cycles are wasted, and then we + * must retry with smaller input size. 1000 is 100%. + */ + last_comp_ratio = 100UL; + } + cmdp->crb.gzip_fc = 0; + putnn(cmdp->crb, gzip_fc, fc); + + /* + * NX source buffers + */ + first_used = fifo_used_first_bytes(cur_in, used_in, fifo_in_len); + last_used = fifo_used_last_bytes(cur_in, used_in, fifo_in_len); + + if (first_used > 0) + nx_append_dde(ddl_in, fifo_in + cur_in, first_used); + + if (last_used > 0) + nx_append_dde(ddl_in, fifo_in, last_used); + + /* + * NX target buffers + */ + first_free = fifo_free_first_bytes(cur_out, used_out, fifo_out_len); + last_free = fifo_free_last_bytes(cur_out, used_out, fifo_out_len); + + /* Reduce output free space amount not to overwrite the history */ + int target_max = NX_MAX(0, fifo_free_bytes(used_out, fifo_out_len) + - (1<<16)); + + NXPRT(fprintf(stderr, "target_max %d (0x%x)\n", target_max, + target_max)); + + first_free = NX_MIN(target_max, first_free); + if (first_free > 0) { + first_offset = fifo_free_first_offset(cur_out, used_out); + nx_append_dde(ddl_out, fifo_out + first_offset, first_free); + } + + if (last_free > 0) { + last_free = NX_MIN(target_max - first_free, last_free); + if (last_free > 0) { + last_offset = fifo_free_last_offset(cur_out, used_out, + fifo_out_len); + nx_append_dde(ddl_out, fifo_out + last_offset, + last_free); + } + } + + /* Target buffer size is used to limit the source data size + * based on previous measurements of compression ratio. + */ + + /* source_sz includes history */ + source_sz = getp32(ddl_in, ddebc); + assert(source_sz > history_len); + source_sz = source_sz - history_len; + + /* Estimating how much source is needed to 3/4 fill a + * target_max size target buffer. If we overshoot, then NX + * must repeat the job with smaller input and we waste + * bandwidth. If we undershoot then we use more NX calls than + * necessary. + */ + + source_sz_estimate = ((uint64_t)target_max * last_comp_ratio * 3UL) + / 4000; + + if (source_sz_estimate < source_sz) { + /* Target might be small, therefore limiting the + * source data. + */ + source_sz = source_sz_estimate; + target_sz_estimate = target_max; + } else { + /* Source file might be small, therefore limiting target + * touch pages to a smaller value to save processor cycles. + */ + target_sz_estimate = ((uint64_t)source_sz * 1000UL) + / (last_comp_ratio + 1); + target_sz_estimate = NX_MIN(2 * target_sz_estimate, + target_max); + } + + source_sz = source_sz + history_len; + + /* Some NX condition codes require submitting the NX job again. + * Kernel doesn't handle NX page faults. Expects user code to + * touch pages. + */ + pgfault_retries = NX_MAX_FAULTS; + +restart_nx: + + putp32(ddl_in, ddebc, source_sz); + + /* Fault in pages */ + nxu_touch_pages(cmdp, sizeof(struct nx_gzip_crb_cpb_t), page_sz, 1); + nx_touch_pages_dde(ddl_in, 0, page_sz, 0); + nx_touch_pages_dde(ddl_out, target_sz_estimate, page_sz, 1); + + /* Send job to NX */ + cc = nx_submit_job(ddl_in, ddl_out, cmdp, devhandle); + + switch (cc) { + + case ERR_NX_TRANSLATION: + + /* We touched the pages ahead of time. In the most common case + * we shouldn't be here. But may be some pages were paged out. + * Kernel should have placed the faulting address to fsaddr. + */ + NXPRT(fprintf(stderr, "ERR_NX_TRANSLATION %p\n", + (void *)cmdp->crb.csb.fsaddr)); + + if (pgfault_retries == NX_MAX_FAULTS) { + /* Try once with exact number of pages */ + --pgfault_retries; + goto restart_nx; + } else if (pgfault_retries > 0) { + /* If still faulting try fewer input pages + * assuming memory outage + */ + if (source_sz > page_sz) + source_sz = NX_MAX(source_sz / 2, page_sz); + --pgfault_retries; + goto restart_nx; + } else { + fprintf(stderr, "cannot make progress; too many "); + fprintf(stderr, "page fault retries cc= %d\n", cc); + rc = -1; + goto err5; + } + + case ERR_NX_DATA_LENGTH: + + NXPRT(fprintf(stderr, "ERR_NX_DATA_LENGTH; ")); + NXPRT(fprintf(stderr, "stream may have trailing data\n")); + + /* Not an error in the most common case; it just says + * there is trailing data that we must examine. + * + * CC=3 CE(1)=0 CE(0)=1 indicates partial completion + * Fig.6-7 and Table 6-8. + */ + nx_ce = get_csb_ce_ms3b(cmdp->crb.csb); + + if (!csb_ce_termination(nx_ce) && + csb_ce_partial_completion(nx_ce)) { + /* Check CPB for more information + * spbc and tpbc are valid + */ + sfbt = getnn(cmdp->cpb, out_sfbt); /* Table 6-4 */ + subc = getnn(cmdp->cpb, out_subc); /* Table 6-4 */ + spbc = get32(cmdp->cpb, out_spbc_decomp); + tpbc = get32(cmdp->crb.csb, tpbc); + assert(target_max >= tpbc); + + goto ok_cc3; /* not an error */ + } else { + /* History length error when CE(1)=1 CE(0)=0. */ + rc = -1; + fprintf(stderr, "history length error cc= %d\n", cc); + goto err5; + } + + case ERR_NX_TARGET_SPACE: + + /* Target buffer not large enough; retry smaller input + * data; give at least 1 byte. SPBC/TPBC are not valid. + */ + assert(source_sz > history_len); + source_sz = ((source_sz - history_len + 2) / 2) + history_len; + NXPRT(fprintf(stderr, "ERR_NX_TARGET_SPACE; retry with ")); + NXPRT(fprintf(stderr, "smaller input data src %d hist %d\n", + source_sz, history_len)); + goto restart_nx; + + case ERR_NX_OK: + + /* This should not happen for gzip formatted data; + * we need trailing crc and isize + */ + fprintf(stderr, "ERR_NX_OK\n"); + spbc = get32(cmdp->cpb, out_spbc_decomp); + tpbc = get32(cmdp->crb.csb, tpbc); + assert(target_max >= tpbc); + assert(spbc >= history_len); + source_sz = spbc - history_len; + goto offsets_state; + + default: + fprintf(stderr, "error: cc= %d\n", cc); + rc = -1; + goto err5; + } + +ok_cc3: + + NXPRT(fprintf(stderr, "cc3: sfbt: %x\n", sfbt)); + + assert(spbc > history_len); + source_sz = spbc - history_len; + + /* Table 6-4: Source Final Block Type (SFBT) describes the + * last processed deflate block and clues the software how to + * resume the next job. SUBC indicates how many input bits NX + * consumed but did not process. SPBC indicates how many + * bytes of source were given to the accelerator including + * history bytes. + */ + + switch (sfbt) { + int dhtlen; + + case 0x0: /* Deflate final EOB received */ + + /* Calculating the checksum start position. */ + + source_sz = source_sz - subc / 8; + is_final = 1; + break; + + /* Resume decompression cases are below. Basically + * indicates where NX has suspended and how to resume + * the input stream. + */ + + case 0x8: /* Within a literal block; use rembytecount */ + case 0x9: /* Within a literal block; use rembytecount; bfinal=1 */ + + /* Supply the partially processed source byte again */ + source_sz = source_sz - ((subc + 7) / 8); + + /* SUBC LS 3bits: number of bits in the first source byte need + * to be processed. + * 000 means all 8 bits; Table 6-3 + * Clear subc, histlen, sfbt, rembytecnt, dhtlen + */ + cmdp->cpb.in_subc = 0; + cmdp->cpb.in_sfbt = 0; + putnn(cmdp->cpb, in_subc, subc % 8); + putnn(cmdp->cpb, in_sfbt, sfbt); + putnn(cmdp->cpb, in_rembytecnt, getnn(cmdp->cpb, + out_rembytecnt)); + break; + + case 0xA: /* Within a FH block; */ + case 0xB: /* Within a FH block; bfinal=1 */ + + source_sz = source_sz - ((subc + 7) / 8); + + /* Clear subc, histlen, sfbt, rembytecnt, dhtlen */ + cmdp->cpb.in_subc = 0; + cmdp->cpb.in_sfbt = 0; + putnn(cmdp->cpb, in_subc, subc % 8); + putnn(cmdp->cpb, in_sfbt, sfbt); + break; + + case 0xC: /* Within a DH block; */ + case 0xD: /* Within a DH block; bfinal=1 */ + + source_sz = source_sz - ((subc + 7) / 8); + + /* Clear subc, histlen, sfbt, rembytecnt, dhtlen */ + cmdp->cpb.in_subc = 0; + cmdp->cpb.in_sfbt = 0; + putnn(cmdp->cpb, in_subc, subc % 8); + putnn(cmdp->cpb, in_sfbt, sfbt); + + dhtlen = getnn(cmdp->cpb, out_dhtlen); + putnn(cmdp->cpb, in_dhtlen, dhtlen); + assert(dhtlen >= 42); + + /* Round up to a qword */ + dhtlen = (dhtlen + 127) / 128; + + while (dhtlen > 0) { /* Copy dht from cpb.out to cpb.in */ + --dhtlen; + cmdp->cpb.in_dht[dhtlen] = cmdp->cpb.out_dht[dhtlen]; + } + break; + + case 0xE: /* Within a block header; bfinal=0; */ + /* Also given if source data exactly ends (SUBC=0) with + * EOB code with BFINAL=0. Means the next byte will + * contain a block header. + */ + case 0xF: /* within a block header with BFINAL=1. */ + + source_sz = source_sz - ((subc + 7) / 8); + + /* Clear subc, histlen, sfbt, rembytecnt, dhtlen */ + cmdp->cpb.in_subc = 0; + cmdp->cpb.in_sfbt = 0; + putnn(cmdp->cpb, in_subc, subc % 8); + putnn(cmdp->cpb, in_sfbt, sfbt); + + /* Engine did not process any data */ + if (is_eof && (source_sz == 0)) + is_final = 1; + } + +offsets_state: + + /* Adjust the source and target buffer offsets and lengths */ + + NXPRT(fprintf(stderr, "offsets_state:\n")); + + /* Delete input data from fifo_in */ + used_in = used_in - source_sz; + cur_in = (cur_in + source_sz) % fifo_in_len; + input_file_offset = input_file_offset + source_sz; + + /* Add output data to fifo_out */ + used_out = used_out + tpbc; + + assert(used_out <= fifo_out_len); + + total_out = total_out + tpbc; + + /* Deflate history is 32KB max. No need to supply more + * than 32KB on a resume. + */ + history_len = (total_out > window_max) ? window_max : total_out; + + /* To estimate expected expansion in the next NX job; 500 means 50%. + * Deflate best case is around 1 to 1000. + */ + last_comp_ratio = (1000UL * ((uint64_t)source_sz + 1)) + / ((uint64_t)tpbc + 1); + last_comp_ratio = NX_MAX(NX_MIN(1000UL, last_comp_ratio), 1); + NXPRT(fprintf(stderr, "comp_ratio %ld source_sz %d spbc %d tpbc %d\n", + last_comp_ratio, source_sz, spbc, tpbc)); + + resuming = 1; + +finish_state: + + NXPRT(fprintf(stderr, "finish_state:\n")); + + if (is_final) { + if (used_out) + goto write_state; /* More data to write out */ + else if (used_in < 8) { + /* Need at least 8 more bytes containing gzip crc + * and isize. + */ + rc = -1; + goto err4; + } else { + /* Compare checksums and exit */ + int i; + unsigned char tail[8]; + uint32_t cksum, isize; + + for (i = 0; i < 8; i++) + tail[i] = fifo_in[(cur_in + i) % fifo_in_len]; + fprintf(stderr, "computed checksum %08x isize %08x\n", + cmdp->cpb.out_crc, (uint32_t) (total_out + % (1ULL<<32))); + cksum = ((uint32_t) tail[0] | (uint32_t) tail[1]<<8 + | (uint32_t) tail[2]<<16 + | (uint32_t) tail[3]<<24); + isize = ((uint32_t) tail[4] | (uint32_t) tail[5]<<8 + | (uint32_t) tail[6]<<16 + | (uint32_t) tail[7]<<24); + fprintf(stderr, "stored checksum %08x isize %08x\n", + cksum, isize); + + if (cksum == cmdp->cpb.out_crc && isize == (uint32_t) + (total_out % (1ULL<<32))) { + rc = 0; goto ok1; + } else { + rc = -1; goto err4; + } + } + } else + goto read_state; + + return -1; + +err1: + fprintf(stderr, "error: not a gzip file, expect %x, read %x\n", + expect, c); + return -1; + +err2: + fprintf(stderr, "error: the FLG byte is wrong or not being handled\n"); + return -1; + +err3: + fprintf(stderr, "error: gzip header\n"); + return -1; + +err4: + fprintf(stderr, "error: checksum missing or mismatch\n"); + +err5: +ok1: + fprintf(stderr, "decomp is complete: fclose\n"); + fclose(outf); + + return rc; +} + + +int main(int argc, char **argv) +{ + int rc; + struct sigaction act; + void *handle; + + nx_dbg = 0; + nx_gzip_log = NULL; + act.sa_handler = 0; + act.sa_sigaction = nxu_sigsegv_handler; + act.sa_flags = SA_SIGINFO; + act.sa_restorer = 0; + sigemptyset(&act.sa_mask); + sigaction(SIGSEGV, &act, NULL); + + handle = nx_function_begin(NX_FUNC_COMP_GZIP, 0); + if (!handle) { + fprintf(stderr, "Unable to init NX, errno %d\n", errno); + exit(-1); + } + + rc = decompress_file(argc, argv, handle); + + nx_function_end(handle); + + return rc; +} diff --git a/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh b/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh index 7cc7256ba1c7..c7b46c5fd7b3 100755 --- a/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh +++ b/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh @@ -26,6 +26,7 @@ function test_sizes echo "Testing $size ($n) ..." dd if=/dev/urandom of=$fname bs=$size count=1 ./gzfht_test $fname + ./gunz_test ${fname}.nx.gz done }