Merge branch 'for-5.20/elan' into for-linus
- support for Elan eKTH6915 touchscreens (Douglas Anderson)
This commit is contained in:
Jiri Kosina
commit
86f6710dae
65
Documentation/devicetree/bindings/input/elan,ekth6915.yaml
Normal file
65
Documentation/devicetree/bindings/input/elan,ekth6915.yaml
Normal file
@ -0,0 +1,65 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Elan eKTH6915 touchscreen controller
|
||||
|
||||
maintainers:
|
||||
- Douglas Anderson <dianders@chromium.org>
|
||||
|
||||
description:
|
||||
Supports the Elan eKTH6915 touchscreen controller.
|
||||
This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- const: elan,ekth6915
|
||||
|
||||
reg:
|
||||
const: 0x10
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
|
||||
|
||||
vcc33-supply:
|
||||
description: The 3.3V supply to the touchscreen.
|
||||
|
||||
vccio-supply:
|
||||
description:
|
||||
The IO supply to the touchscreen. Need not be specified if this is the
|
||||
same as the 3.3V supply.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- vcc33-supply
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ap_ts: touchscreen@10 {
|
||||
compatible = "elan,ekth6915";
|
||||
reg = <0x10>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
|
||||
vcc33-supply = <&pp3300_ts>;
|
||||
};
|
||||
};
|
||||
@ -32,6 +32,21 @@ config I2C_HID_OF
|
||||
will be called i2c-hid-of. It will also build/depend on the
|
||||
module i2c-hid.
|
||||
|
||||
config I2C_HID_OF_ELAN
|
||||
tristate "Driver for Elan hid-i2c based devices on OF systems"
|
||||
default n
|
||||
depends on I2C && INPUT && OF
|
||||
help
|
||||
Say Y here if you want support for Elan i2c devices that use
|
||||
the i2c-hid protocol on Open Firmware (Device Tree)-based
|
||||
systems.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
This support is also available as a module. If so, the module
|
||||
will be called i2c-hid-of-elan. It will also build/depend on
|
||||
the module i2c-hid.
|
||||
|
||||
config I2C_HID_OF_GOODIX
|
||||
tristate "Driver for Goodix hid-i2c based devices on OF systems"
|
||||
default n
|
||||
|
||||
@ -10,4 +10,5 @@ i2c-hid-$(CONFIG_DMI) += i2c-hid-dmi-quirks.o
|
||||
|
||||
obj-$(CONFIG_I2C_HID_ACPI) += i2c-hid-acpi.o
|
||||
obj-$(CONFIG_I2C_HID_OF) += i2c-hid-of.o
|
||||
obj-$(CONFIG_I2C_HID_OF_ELAN) += i2c-hid-of-elan.o
|
||||
obj-$(CONFIG_I2C_HID_OF_GOODIX) += i2c-hid-of-goodix.o
|
||||
|
||||
130
drivers/hid/i2c-hid/i2c-hid-of-elan.c
Normal file
130
drivers/hid/i2c-hid/i2c-hid-of-elan.c
Normal file
@ -0,0 +1,130 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Driver for Elan touchscreens that use the i2c-hid protocol.
|
||||
*
|
||||
* Copyright 2020 Google LLC
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
|
||||
#include "i2c-hid.h"
|
||||
|
||||
struct elan_i2c_hid_chip_data {
|
||||
unsigned int post_gpio_reset_delay_ms;
|
||||
unsigned int post_power_delay_ms;
|
||||
u16 hid_descriptor_address;
|
||||
};
|
||||
|
||||
struct i2c_hid_of_elan {
|
||||
struct i2chid_ops ops;
|
||||
|
||||
struct regulator *vcc33;
|
||||
struct regulator *vccio;
|
||||
struct gpio_desc *reset_gpio;
|
||||
const struct elan_i2c_hid_chip_data *chip_data;
|
||||
};
|
||||
|
||||
static int elan_i2c_hid_power_up(struct i2chid_ops *ops)
|
||||
{
|
||||
struct i2c_hid_of_elan *ihid_elan =
|
||||
container_of(ops, struct i2c_hid_of_elan, ops);
|
||||
int ret;
|
||||
|
||||
ret = regulator_enable(ihid_elan->vcc33);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = regulator_enable(ihid_elan->vccio);
|
||||
if (ret) {
|
||||
regulator_disable(ihid_elan->vcc33);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (ihid_elan->chip_data->post_power_delay_ms)
|
||||
msleep(ihid_elan->chip_data->post_power_delay_ms);
|
||||
|
||||
gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0);
|
||||
if (ihid_elan->chip_data->post_gpio_reset_delay_ms)
|
||||
msleep(ihid_elan->chip_data->post_gpio_reset_delay_ms);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void elan_i2c_hid_power_down(struct i2chid_ops *ops)
|
||||
{
|
||||
struct i2c_hid_of_elan *ihid_elan =
|
||||
container_of(ops, struct i2c_hid_of_elan, ops);
|
||||
|
||||
gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1);
|
||||
regulator_disable(ihid_elan->vccio);
|
||||
regulator_disable(ihid_elan->vcc33);
|
||||
}
|
||||
|
||||
static int i2c_hid_of_elan_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct i2c_hid_of_elan *ihid_elan;
|
||||
|
||||
ihid_elan = devm_kzalloc(&client->dev, sizeof(*ihid_elan), GFP_KERNEL);
|
||||
if (!ihid_elan)
|
||||
return -ENOMEM;
|
||||
|
||||
ihid_elan->ops.power_up = elan_i2c_hid_power_up;
|
||||
ihid_elan->ops.power_down = elan_i2c_hid_power_down;
|
||||
|
||||
/* Start out with reset asserted */
|
||||
ihid_elan->reset_gpio =
|
||||
devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(ihid_elan->reset_gpio))
|
||||
return PTR_ERR(ihid_elan->reset_gpio);
|
||||
|
||||
ihid_elan->vccio = devm_regulator_get(&client->dev, "vccio");
|
||||
if (IS_ERR(ihid_elan->vccio))
|
||||
return PTR_ERR(ihid_elan->vccio);
|
||||
|
||||
ihid_elan->vcc33 = devm_regulator_get(&client->dev, "vcc33");
|
||||
if (IS_ERR(ihid_elan->vcc33))
|
||||
return PTR_ERR(ihid_elan->vcc33);
|
||||
|
||||
ihid_elan->chip_data = device_get_match_data(&client->dev);
|
||||
|
||||
return i2c_hid_core_probe(client, &ihid_elan->ops,
|
||||
ihid_elan->chip_data->hid_descriptor_address, 0);
|
||||
}
|
||||
|
||||
static const struct elan_i2c_hid_chip_data elan_ekth6915_chip_data = {
|
||||
.post_power_delay_ms = 1,
|
||||
.post_gpio_reset_delay_ms = 300,
|
||||
.hid_descriptor_address = 0x0001,
|
||||
};
|
||||
|
||||
static const struct of_device_id elan_i2c_hid_of_match[] = {
|
||||
{ .compatible = "elan,ekth6915", .data = &elan_ekth6915_chip_data },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, elan_i2c_hid_of_match);
|
||||
|
||||
static struct i2c_driver elan_i2c_hid_ts_driver = {
|
||||
.driver = {
|
||||
.name = "i2c_hid_of_elan",
|
||||
.pm = &i2c_hid_core_pm,
|
||||
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
||||
.of_match_table = of_match_ptr(elan_i2c_hid_of_match),
|
||||
},
|
||||
.probe = i2c_hid_of_elan_probe,
|
||||
.remove = i2c_hid_core_remove,
|
||||
.shutdown = i2c_hid_core_shutdown,
|
||||
};
|
||||
module_i2c_driver(elan_i2c_hid_ts_driver);
|
||||
|
||||
MODULE_AUTHOR("Douglas Anderson <dianders@chromium.org>");
|
||||
MODULE_DESCRIPTION("Elan i2c-hid touchscreen driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
x
Reference in New Issue
Block a user