iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Revert "i2c: designware: do not disable adapter after transfer"

Browse Source 
This reverts commit 0317e6c0f1.

Srinivas reported recently touchscreen and touchpad stopped working in
Haswell based machine in Linux 4.9-rc series with timeout errors from
i2c_designware:

[   16.508013] i2c_designware INT33C3:00: controller timed out
[   16.508302] i2c_hid i2c-MSFT0001:02: failed to change power setting.
[   17.532016] i2c_designware INT33C3:00: controller timed out
[   18.556022] i2c_designware INT33C3:00: controller timed out
[   18.556315] i2c_hid i2c-ATML1000:00: failed to retrieve report from device.

I managed to reproduce similar errors on another Haswell based machine
where touchscreen initialization fails maybe in every 1/5 - 1/2 boots.
Since root cause for these errors is not clear yet and debugging is
ongoing it's better to revert this commit as we are near to release.

Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Jarkko Nikula 2016-11-25 17:22:27 +02:00 committed by Wolfram Sang
parent 4d6d5f1d08
commit 89119f0835
1 changed files with 18 additions and 37 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
drivers/i2c/busses/i2c-designware-core.c
View File

@ -91,9 +91,7 @@
DW_IC_INTR_TX_ABRT | \
DW_IC_INTR_STOP_DET)
#define DW_IC_STATUS_ACTIVITY 0x1
#define DW_IC_STATUS_TFE BIT(2)
#define DW_IC_STATUS_MST_ACTIVITY BIT(5)
#define DW_IC_STATUS_ACTIVITY 0x1
#define DW_IC_SDA_HOLD_RX_SHIFT 16
#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
@ -478,25 +476,9 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
{
struct i2c_msg *msgs = dev->msgs;
u32 ic_tar = 0;
bool enabled;
enabled = dw_readl(dev, DW_IC_ENABLE_STATUS) & 1;
if (enabled) {
u32 ic_status;
/*
* Only disable adapter if ic_tar and ic_con can't be
* dynamically updated
*/
ic_status = dw_readl(dev, DW_IC_STATUS);
if (!dev->dynamic_tar_update_enabled ||
(ic_status & DW_IC_STATUS_MST_ACTIVITY) ||
!(ic_status & DW_IC_STATUS_TFE)) {
__i2c_dw_enable_and_wait(dev, false);
enabled = false;
}
}
/* Disable the adapter */
__i2c_dw_enable_and_wait(dev, false);
/* if the slave address is ten bit address, enable 10BITADDR */
if (dev->dynamic_tar_update_enabled) {
@ -526,8 +508,8 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
/* enforce disabled interrupts (due to HW issues) */
i2c_dw_disable_int(dev);
if (!enabled)
__i2c_dw_enable(dev, true);
/* Enable the adapter */
__i2c_dw_enable(dev, true);
/* Clear and enable interrupts */
dw_readl(dev, DW_IC_CLR_INTR);
@ -708,8 +690,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
}
/*
* Prepare controller for a transaction and start transfer by calling
* i2c_dw_xfer_init()
* Prepare controller for a transaction and call i2c_dw_xfer_msg
*/
static int
i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@ -752,6 +733,16 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
goto done;
}
/*
* We must disable the adapter before returning and signaling the end
* of the current transfer. Otherwise the hardware might continue
* generating interrupts which in turn causes a race condition with
* the following transfer. Needs some more investigation if the
* additional interrupts are a hardware bug or this driver doesn't
* handle them correctly yet.
*/
__i2c_dw_enable(dev, false);
if (dev->msg_err) {
ret = dev->msg_err;
goto done;
@ -893,19 +884,9 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
*/
tx_aborted:
if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
|| dev->msg_err) {
/*
* We must disable interruts before returning and signaling
* the end of the current transfer. Otherwise the hardware
* might continue generating interrupts for non-existent
* transfers.
*/
i2c_dw_disable_int(dev);
dw_readl(dev, DW_IC_CLR_INTR);
if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
complete(&dev->cmd_complete);
} else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
/* workaround to trigger pending interrupt */
stat = dw_readl(dev, DW_IC_INTR_MASK);
i2c_dw_disable_int(dev);