[PATCH] skge: remove XM phy (untested code)
Remove support for the non-Broadcom genesis based boards. The code is untested, and probably won't work as is. The newer boards are all Yukon based, and only old Genesis board I can find uses Broadcom. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
This commit is contained in:
Stephen Hemminger
Jeff Garzik
parent
c506a50902
commit
89bf5f231f
@ -621,16 +621,8 @@ static void skge_led_on(struct skge_hw *hw, int port)
|
||||
skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
|
||||
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
|
||||
|
||||
switch (hw->phy_type) {
|
||||
case SK_PHY_BCOM:
|
||||
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
|
||||
PHY_B_PEC_LED_ON);
|
||||
break;
|
||||
default:
|
||||
skge_write8(hw, SK_REG(port, TX_LED_TST), LED_T_ON);
|
||||
skge_write32(hw, SK_REG(port, TX_LED_VAL), 100);
|
||||
skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
|
||||
}
|
||||
/* For Broadcom Phy only */
|
||||
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
|
||||
} else {
|
||||
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
|
||||
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
|
||||
@ -651,15 +643,8 @@ static void skge_led_off(struct skge_hw *hw, int port)
|
||||
skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
|
||||
skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
|
||||
|
||||
switch (hw->phy_type) {
|
||||
case SK_PHY_BCOM:
|
||||
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
|
||||
PHY_B_PEC_LED_OFF);
|
||||
break;
|
||||
default:
|
||||
skge_write32(hw, SK_REG(port, TX_LED_VAL), 0);
|
||||
skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_T_OFF);
|
||||
}
|
||||
/* Broadcom only */
|
||||
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
|
||||
} else {
|
||||
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
|
||||
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
|
||||
@ -887,21 +872,21 @@ static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg)
|
||||
|
||||
xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
|
||||
v = xm_read16(hw, port, XM_PHY_DATA);
|
||||
if (hw->phy_type != SK_PHY_XMAC) {
|
||||
for (i = 0; i < PHY_RETRIES; i++) {
|
||||
udelay(1);
|
||||
if (xm_read16(hw, port, XM_MMU_CMD)
|
||||
& XM_MMU_PHY_RDY)
|
||||
goto ready;
|
||||
}
|
||||
|
||||
printk(KERN_WARNING PFX "%s: phy read timed out\n",
|
||||
hw->dev[port]->name);
|
||||
return 0;
|
||||
ready:
|
||||
v = xm_read16(hw, port, XM_PHY_DATA);
|
||||
/* Need to wait for external PHY */
|
||||
for (i = 0; i < PHY_RETRIES; i++) {
|
||||
udelay(1);
|
||||
if (xm_read16(hw, port, XM_MMU_CMD)
|
||||
& XM_MMU_PHY_RDY)
|
||||
goto ready;
|
||||
}
|
||||
|
||||
printk(KERN_WARNING PFX "%s: phy read timed out\n",
|
||||
hw->dev[port]->name);
|
||||
return 0;
|
||||
ready:
|
||||
v = xm_read16(hw, port, XM_PHY_DATA);
|
||||
|
||||
return v;
|
||||
}
|
||||
|
||||
@ -913,7 +898,7 @@ static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
|
||||
for (i = 0; i < PHY_RETRIES; i++) {
|
||||
if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
|
||||
goto ready;
|
||||
cpu_relax();
|
||||
udelay(1);
|
||||
}
|
||||
printk(KERN_WARNING PFX "%s: phy write failed to come ready\n",
|
||||
hw->dev[port]->name);
|
||||
@ -970,9 +955,8 @@ static void genesis_reset(struct skge_hw *hw, int port)
|
||||
xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */
|
||||
xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */
|
||||
|
||||
/* disable all PHY IRQs */
|
||||
if (hw->phy_type == SK_PHY_BCOM)
|
||||
xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
|
||||
/* disable Broadcom PHY IRQ */
|
||||
xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
|
||||
|
||||
xm_outhash(hw, port, XM_HSM, (u8 *) &zero);
|
||||
for (i = 0; i < 15; i++)
|
||||
@ -1020,54 +1004,55 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
|
||||
* GMII mode.
|
||||
*/
|
||||
spin_lock_bh(&hw->phy_lock);
|
||||
if (hw->phy_type != SK_PHY_XMAC) {
|
||||
/* Take PHY out of reset. */
|
||||
r = skge_read32(hw, B2_GP_IO);
|
||||
if (port == 0)
|
||||
r |= GP_DIR_0|GP_IO_0;
|
||||
else
|
||||
r |= GP_DIR_2|GP_IO_2;
|
||||
|
||||
skge_write32(hw, B2_GP_IO, r);
|
||||
skge_read32(hw, B2_GP_IO);
|
||||
/* External Phy Handling */
|
||||
/* Take PHY out of reset. */
|
||||
r = skge_read32(hw, B2_GP_IO);
|
||||
if (port == 0)
|
||||
r |= GP_DIR_0|GP_IO_0;
|
||||
else
|
||||
r |= GP_DIR_2|GP_IO_2;
|
||||
|
||||
/* Enable GMII mode on the XMAC. */
|
||||
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
|
||||
skge_write32(hw, B2_GP_IO, r);
|
||||
skge_read32(hw, B2_GP_IO);
|
||||
|
||||
id1 = xm_phy_read(hw, port, PHY_XMAC_ID1);
|
||||
/* Enable GMII mode on the XMAC. */
|
||||
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
|
||||
|
||||
/* Optimize MDIO transfer by suppressing preamble. */
|
||||
xm_write16(hw, port, XM_MMU_CMD,
|
||||
xm_read16(hw, port, XM_MMU_CMD)
|
||||
| XM_MMU_NO_PRE);
|
||||
id1 = xm_phy_read(hw, port, PHY_XMAC_ID1);
|
||||
|
||||
if (id1 == PHY_BCOM_ID1_C0) {
|
||||
/*
|
||||
* Workaround BCOM Errata for the C0 type.
|
||||
* Write magic patterns to reserved registers.
|
||||
*/
|
||||
for (i = 0; i < ARRAY_SIZE(C0hack); i++)
|
||||
xm_phy_write(hw, port,
|
||||
C0hack[i].reg, C0hack[i].val);
|
||||
|
||||
} else if (id1 == PHY_BCOM_ID1_A1) {
|
||||
/*
|
||||
* Workaround BCOM Errata for the A1 type.
|
||||
* Write magic patterns to reserved registers.
|
||||
*/
|
||||
for (i = 0; i < ARRAY_SIZE(A1hack); i++)
|
||||
xm_phy_write(hw, port,
|
||||
A1hack[i].reg, A1hack[i].val);
|
||||
}
|
||||
/* Optimize MDIO transfer by suppressing preamble. */
|
||||
xm_write16(hw, port, XM_MMU_CMD,
|
||||
xm_read16(hw, port, XM_MMU_CMD)
|
||||
| XM_MMU_NO_PRE);
|
||||
|
||||
if (id1 == PHY_BCOM_ID1_C0) {
|
||||
/*
|
||||
* Workaround BCOM Errata (#10523) for all BCom PHYs.
|
||||
* Disable Power Management after reset.
|
||||
* Workaround BCOM Errata for the C0 type.
|
||||
* Write magic patterns to reserved registers.
|
||||
*/
|
||||
r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
|
||||
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM);
|
||||
for (i = 0; i < ARRAY_SIZE(C0hack); i++)
|
||||
xm_phy_write(hw, port,
|
||||
C0hack[i].reg, C0hack[i].val);
|
||||
|
||||
} else if (id1 == PHY_BCOM_ID1_A1) {
|
||||
/*
|
||||
* Workaround BCOM Errata for the A1 type.
|
||||
* Write magic patterns to reserved registers.
|
||||
*/
|
||||
for (i = 0; i < ARRAY_SIZE(A1hack); i++)
|
||||
xm_phy_write(hw, port,
|
||||
A1hack[i].reg, A1hack[i].val);
|
||||
}
|
||||
|
||||
/*
|
||||
* Workaround BCOM Errata (#10523) for all BCom PHYs.
|
||||
* Disable Power Management after reset.
|
||||
*/
|
||||
r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
|
||||
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM);
|
||||
|
||||
|
||||
/* Dummy read */
|
||||
xm_read16(hw, port, XM_ISRC);
|
||||
|
||||
@ -1098,8 +1083,8 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
|
||||
*/
|
||||
r = xm_read32(hw, port, XM_MODE);
|
||||
xm_write32(hw, port, XM_MODE,
|
||||
XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT|
|
||||
XM_MD_RX_ERR|XM_MD_RX_IRLE);
|
||||
XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT|
|
||||
XM_MD_RX_ERR|XM_MD_RX_IRLE);
|
||||
|
||||
xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr);
|
||||
xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr);
|
||||
@ -1150,103 +1135,70 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
|
||||
else
|
||||
xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK));
|
||||
|
||||
switch (hw->phy_type) {
|
||||
case SK_PHY_XMAC:
|
||||
if (skge->autoneg == AUTONEG_ENABLE) {
|
||||
ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD;
|
||||
/* Broadcom phy initialization */
|
||||
ctrl1 = PHY_CT_SP1000;
|
||||
ctrl2 = 0;
|
||||
ctrl3 = PHY_AN_CSMA;
|
||||
ctrl4 = PHY_B_PEC_EN_LTR;
|
||||
ctrl5 = PHY_B_AC_TX_TST;
|
||||
|
||||
switch (skge->flow_control) {
|
||||
case FLOW_MODE_NONE:
|
||||
ctrl1 |= PHY_X_P_NO_PAUSE;
|
||||
break;
|
||||
case FLOW_MODE_LOC_SEND:
|
||||
ctrl1 |= PHY_X_P_ASYM_MD;
|
||||
break;
|
||||
case FLOW_MODE_SYMMETRIC:
|
||||
ctrl1 |= PHY_X_P_SYM_MD;
|
||||
break;
|
||||
case FLOW_MODE_REM_SEND:
|
||||
ctrl1 |= PHY_X_P_BOTH_MD;
|
||||
break;
|
||||
}
|
||||
if (skge->autoneg == AUTONEG_ENABLE) {
|
||||
/*
|
||||
* Workaround BCOM Errata #1 for the C5 type.
|
||||
* 1000Base-T Link Acquisition Failure in Slave Mode
|
||||
* Set Repeater/DTE bit 10 of the 1000Base-T Control Register
|
||||
*/
|
||||
ctrl2 |= PHY_B_1000C_RD;
|
||||
if (skge->advertising & ADVERTISED_1000baseT_Half)
|
||||
ctrl2 |= PHY_B_1000C_AHD;
|
||||
if (skge->advertising & ADVERTISED_1000baseT_Full)
|
||||
ctrl2 |= PHY_B_1000C_AFD;
|
||||
|
||||
xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1);
|
||||
ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG;
|
||||
} else {
|
||||
ctrl2 = 0;
|
||||
if (skge->duplex == DUPLEX_FULL)
|
||||
ctrl2 |= PHY_CT_DUP_MD;
|
||||
/* Set Flow-control capabilities */
|
||||
switch (skge->flow_control) {
|
||||
case FLOW_MODE_NONE:
|
||||
ctrl3 |= PHY_B_P_NO_PAUSE;
|
||||
break;
|
||||
case FLOW_MODE_LOC_SEND:
|
||||
ctrl3 |= PHY_B_P_ASYM_MD;
|
||||
break;
|
||||
case FLOW_MODE_SYMMETRIC:
|
||||
ctrl3 |= PHY_B_P_SYM_MD;
|
||||
break;
|
||||
case FLOW_MODE_REM_SEND:
|
||||
ctrl3 |= PHY_B_P_BOTH_MD;
|
||||
break;
|
||||
}
|
||||
|
||||
xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2);
|
||||
break;
|
||||
/* Restart Auto-negotiation */
|
||||
ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
|
||||
} else {
|
||||
if (skge->duplex == DUPLEX_FULL)
|
||||
ctrl1 |= PHY_CT_DUP_MD;
|
||||
|
||||
case SK_PHY_BCOM:
|
||||
ctrl1 = PHY_CT_SP1000;
|
||||
ctrl2 = 0;
|
||||
ctrl3 = PHY_AN_CSMA;
|
||||
ctrl4 = PHY_B_PEC_EN_LTR;
|
||||
ctrl5 = PHY_B_AC_TX_TST;
|
||||
|
||||
if (skge->autoneg == AUTONEG_ENABLE) {
|
||||
/*
|
||||
* Workaround BCOM Errata #1 for the C5 type.
|
||||
* 1000Base-T Link Acquisition Failure in Slave Mode
|
||||
* Set Repeater/DTE bit 10 of the 1000Base-T Control Register
|
||||
*/
|
||||
ctrl2 |= PHY_B_1000C_RD;
|
||||
if (skge->advertising & ADVERTISED_1000baseT_Half)
|
||||
ctrl2 |= PHY_B_1000C_AHD;
|
||||
if (skge->advertising & ADVERTISED_1000baseT_Full)
|
||||
ctrl2 |= PHY_B_1000C_AFD;
|
||||
|
||||
/* Set Flow-control capabilities */
|
||||
switch (skge->flow_control) {
|
||||
case FLOW_MODE_NONE:
|
||||
ctrl3 |= PHY_B_P_NO_PAUSE;
|
||||
break;
|
||||
case FLOW_MODE_LOC_SEND:
|
||||
ctrl3 |= PHY_B_P_ASYM_MD;
|
||||
break;
|
||||
case FLOW_MODE_SYMMETRIC:
|
||||
ctrl3 |= PHY_B_P_SYM_MD;
|
||||
break;
|
||||
case FLOW_MODE_REM_SEND:
|
||||
ctrl3 |= PHY_B_P_BOTH_MD;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Restart Auto-negotiation */
|
||||
ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
|
||||
} else {
|
||||
if (skge->duplex == DUPLEX_FULL)
|
||||
ctrl1 |= PHY_CT_DUP_MD;
|
||||
|
||||
ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */
|
||||
}
|
||||
|
||||
xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2);
|
||||
xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3);
|
||||
|
||||
if (skge->netdev->mtu > ETH_DATA_LEN) {
|
||||
ctrl4 |= PHY_B_PEC_HIGH_LA;
|
||||
ctrl5 |= PHY_B_AC_LONG_PACK;
|
||||
|
||||
xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5);
|
||||
}
|
||||
|
||||
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4);
|
||||
xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1);
|
||||
break;
|
||||
ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */
|
||||
}
|
||||
|
||||
xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2);
|
||||
xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3);
|
||||
|
||||
if (skge->netdev->mtu > ETH_DATA_LEN) {
|
||||
ctrl4 |= PHY_B_PEC_HIGH_LA;
|
||||
ctrl5 |= PHY_B_AC_LONG_PACK;
|
||||
|
||||
xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5);
|
||||
}
|
||||
|
||||
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4);
|
||||
xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1);
|
||||
spin_unlock_bh(&hw->phy_lock);
|
||||
|
||||
/* Clear MIB counters */
|
||||
xm_write16(hw, port, XM_STAT_CMD,
|
||||
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
|
||||
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
|
||||
/* Clear two times according to Errata #3 */
|
||||
xm_write16(hw, port, XM_STAT_CMD,
|
||||
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
|
||||
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
|
||||
|
||||
/* Start polling for link status */
|
||||
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
|
||||
@ -1256,6 +1208,7 @@ static void genesis_stop(struct skge_port *skge)
|
||||
{
|
||||
struct skge_hw *hw = skge->hw;
|
||||
int port = skge->port;
|
||||
u32 reg;
|
||||
|
||||
/* Clear Tx packet arbiter timeout IRQ */
|
||||
skge_write16(hw, B3_PA_CTRL,
|
||||
@ -1273,19 +1226,16 @@ static void genesis_stop(struct skge_port *skge)
|
||||
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
|
||||
|
||||
/* For external PHYs there must be special handling */
|
||||
if (hw->phy_type != SK_PHY_XMAC) {
|
||||
u32 reg = skge_read32(hw, B2_GP_IO);
|
||||
|
||||
if (port == 0) {
|
||||
reg |= GP_DIR_0;
|
||||
reg &= ~GP_IO_0;
|
||||
} else {
|
||||
reg |= GP_DIR_2;
|
||||
reg &= ~GP_IO_2;
|
||||
}
|
||||
skge_write32(hw, B2_GP_IO, reg);
|
||||
skge_read32(hw, B2_GP_IO);
|
||||
reg = skge_read32(hw, B2_GP_IO);
|
||||
if (port == 0) {
|
||||
reg |= GP_DIR_0;
|
||||
reg &= ~GP_IO_0;
|
||||
} else {
|
||||
reg |= GP_DIR_2;
|
||||
reg &= ~GP_IO_2;
|
||||
}
|
||||
skge_write32(hw, B2_GP_IO, reg);
|
||||
skge_read32(hw, B2_GP_IO);
|
||||
|
||||
xm_write16(hw, port, XM_MMU_CMD,
|
||||
xm_read16(hw, port, XM_MMU_CMD)
|
||||
@ -1329,16 +1279,6 @@ static void genesis_mac_intr(struct skge_hw *hw, int port)
|
||||
u16 status = xm_read16(hw, port, XM_ISRC);
|
||||
|
||||
pr_debug("genesis_intr status %x\n", status);
|
||||
if (hw->phy_type == SK_PHY_XMAC) {
|
||||
/* LInk down, start polling for state change */
|
||||
if (status & XM_IS_INP_ASS) {
|
||||
xm_write16(hw, port, XM_IMSK,
|
||||
xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS);
|
||||
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
|
||||
}
|
||||
else if (status & XM_IS_AND)
|
||||
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
|
||||
}
|
||||
|
||||
if (status & XM_IS_TXF_UR) {
|
||||
xm_write32(hw, port, XM_MODE, XM_MD_FTF);
|
||||
@ -1458,28 +1398,25 @@ static void genesis_link_up(struct skge_port *skge)
|
||||
xm_write32(hw, port, XM_MODE, mode);
|
||||
|
||||
msk = XM_DEF_MSK;
|
||||
if (hw->phy_type != SK_PHY_XMAC)
|
||||
msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */
|
||||
/* disable GP0 interrupt bit for external Phy */
|
||||
msk |= XM_IS_INP_ASS;
|
||||
|
||||
xm_write16(hw, port, XM_IMSK, msk);
|
||||
xm_read16(hw, port, XM_ISRC);
|
||||
|
||||
/* get MMU Command Reg. */
|
||||
cmd = xm_read16(hw, port, XM_MMU_CMD);
|
||||
if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL)
|
||||
if (skge->duplex == DUPLEX_FULL)
|
||||
cmd |= XM_MMU_GMII_FD;
|
||||
|
||||
if (hw->phy_type == SK_PHY_BCOM) {
|
||||
/*
|
||||
* Workaround BCOM Errata (#10523) for all BCom Phys
|
||||
* Enable Power Management after link up
|
||||
*/
|
||||
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
|
||||
xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL)
|
||||
& ~PHY_B_AC_DIS_PM);
|
||||
xm_phy_write(hw, port, PHY_BCOM_INT_MASK,
|
||||
PHY_B_DEF_MSK);
|
||||
}
|
||||
/*
|
||||
* Workaround BCOM Errata (#10523) for all BCom Phys
|
||||
* Enable Power Management after link up
|
||||
*/
|
||||
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
|
||||
xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL)
|
||||
& ~PHY_B_AC_DIS_PM);
|
||||
xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK);
|
||||
|
||||
/* enable Rx/Tx */
|
||||
xm_write16(hw, port, XM_MMU_CMD,
|
||||
@ -1551,25 +1488,12 @@ static void skge_link_timer(unsigned long __arg)
|
||||
{
|
||||
struct skge_port *skge = (struct skge_port *) __arg;
|
||||
struct skge_hw *hw = skge->hw;
|
||||
int port = skge->port;
|
||||
|
||||
if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev))
|
||||
return;
|
||||
|
||||
spin_lock_bh(&hw->phy_lock);
|
||||
if (hw->phy_type == SK_PHY_BCOM)
|
||||
genesis_bcom_intr(skge);
|
||||
else {
|
||||
int i;
|
||||
for (i = 0; i < 3; i++)
|
||||
if (xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS)
|
||||
break;
|
||||
|
||||
if (i == 3)
|
||||
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
|
||||
else
|
||||
genesis_link_up(skge);
|
||||
}
|
||||
genesis_bcom_intr(skge);
|
||||
spin_unlock_bh(&hw->phy_lock);
|
||||
}
|
||||
|
||||
@ -2737,7 +2661,7 @@ static void skge_extirq(unsigned long data)
|
||||
|
||||
if (hw->chip_id != CHIP_ID_GENESIS)
|
||||
yukon_phy_intr(skge);
|
||||
else if (hw->phy_type == SK_PHY_BCOM)
|
||||
else
|
||||
genesis_bcom_intr(skge);
|
||||
}
|
||||
}
|
||||
@ -2886,9 +2810,6 @@ static int skge_reset(struct skge_hw *hw)
|
||||
switch (hw->chip_id) {
|
||||
case CHIP_ID_GENESIS:
|
||||
switch (hw->phy_type) {
|
||||
case SK_PHY_XMAC:
|
||||
hw->phy_addr = PHY_ADDR_XMAC;
|
||||
break;
|
||||
case SK_PHY_BCOM:
|
||||
hw->phy_addr = PHY_ADDR_BCOM;
|
||||
break;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user