From 528464eaa46ae1bd319882e4dd3495802e55b8c4 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 23 Jul 2015 14:32:32 +0530 Subject: [PATCH 1/5] thermal: remove dangling 'weight_attr' device file This file isn't getting removed while we unbind a device from thermal zone. And this causes following messages when the device is registered again: WARNING: CPU: 0 PID: 2228 at /home/viresh/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x60/0x70() sysfs: cannot create duplicate filename '/devices/virtual/thermal/thermal_zone0/cdev0_weight' Modules linked in: cpufreq_dt(+) [last unloaded: cpufreq_dt] CPU: 0 PID: 2228 Comm: insmod Not tainted 4.2.0-rc3-00059-g44fffd9473eb #272 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x84/0xc4) [] (dump_stack) from [] (warn_slowpath_common+0x80/0xb0) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (sysfs_warn_dup+0x60/0x70) [] (sysfs_warn_dup) from [] (sysfs_add_file_mode_ns+0x13c/0x190) [] (sysfs_add_file_mode_ns) from [] (sysfs_create_file_ns+0x3c/0x48) [] (sysfs_create_file_ns) from [] (thermal_zone_bind_cooling_device+0x260/0x358) [] (thermal_zone_bind_cooling_device) from [] (of_thermal_bind+0x88/0xb4) [] (of_thermal_bind) from [] (__thermal_cooling_device_register+0x17c/0x2e0) [] (__thermal_cooling_device_register) from [] (__cpufreq_cooling_register+0x3a0/0x51c) [] (__cpufreq_cooling_register) from [] (cpufreq_ready+0x44/0x88 [cpufreq_dt]) [] (cpufreq_ready [cpufreq_dt]) from [] (cpufreq_add_dev+0x4a0/0x7dc) [] (cpufreq_add_dev) from [] (subsys_interface_register+0x94/0xd8) [] (subsys_interface_register) from [] (cpufreq_register_driver+0x10c/0x1f0) [] (cpufreq_register_driver) from [] (dt_cpufreq_probe+0x60/0x8c [cpufreq_dt]) [] (dt_cpufreq_probe [cpufreq_dt]) from [] (platform_drv_probe+0x44/0xa4) [] (platform_drv_probe) from [] (driver_probe_device+0x174/0x2b4) [] (driver_probe_device) from [] (__driver_attach+0x8c/0x90) [] (__driver_attach) from [] (bus_for_each_dev+0x68/0x9c) [] (bus_for_each_dev) from [] (bus_add_driver+0x19c/0x214) [] (bus_add_driver) from [] (driver_register+0x78/0xf8) [] (driver_register) from [] (do_one_initcall+0x8c/0x1d4) [] (do_one_initcall) from [] (do_init_module+0x5c/0x1b8) [] (do_init_module) from [] (load_module+0xd34/0xed8) [] (load_module) from [] (SyS_init_module+0xd0/0x120) [] (SyS_init_module) from [] (ret_fast_syscall+0x0/0x3c) ---[ end trace 3be0e7b7dc6e3c4f ]--- Fixes: db91651311c8 ("thermal: export weight to sysfs") Acked-by: Javi Merino Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/thermal_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 04659bfb888b..4ca211be4c0f 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1333,6 +1333,7 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, return -ENODEV; unbind: + device_remove_file(&tz->device, &pos->weight_attr); device_remove_file(&tz->device, &pos->attr); sysfs_remove_link(&tz->device.kobj, pos->name); release_idr(&tz->idr, &tz->lock, pos->id); From d5f831090191fa26a539e12456af64547ab11dde Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Fri, 3 Jul 2015 10:24:33 +0100 Subject: [PATCH 2/5] thermal: power_allocator: trace the real requested power The power allocator governor uses ftrace to output a bunch of internal data for debugging and tuning. Currently, the requested power it outputs is the "weighted" requested power, that is, what each cooling device has requested multiplied by the cooling device weight. It is more useful to trace the real request, without any weight being applied. This commit only affects the data traced, there is no functional change. Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- drivers/thermal/power_allocator.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c index 4672250b329f..63a448f9d93b 100644 --- a/drivers/thermal/power_allocator.c +++ b/drivers/thermal/power_allocator.c @@ -229,7 +229,8 @@ static int allocate_power(struct thermal_zone_device *tz, struct thermal_instance *instance; struct power_allocator_params *params = tz->governor_data; u32 *req_power, *max_power, *granted_power, *extra_actor_power; - u32 total_req_power, max_allocatable_power; + u32 *weighted_req_power; + u32 total_req_power, max_allocatable_power, total_weighted_req_power; u32 total_granted_power, power_range; int i, num_actors, total_weight, ret = 0; int trip_max_desired_temperature = params->trip_max_desired_temperature; @@ -247,16 +248,17 @@ static int allocate_power(struct thermal_zone_device *tz, } /* - * We need to allocate three arrays of the same size: - * req_power, max_power and granted_power. They are going to - * be needed until this function returns. Allocate them all - * in one go to simplify the allocation and deallocation - * logic. + * We need to allocate five arrays of the same size: + * req_power, max_power, granted_power, extra_actor_power and + * weighted_req_power. They are going to be needed until this + * function returns. Allocate them all in one go to simplify + * the allocation and deallocation logic. */ BUILD_BUG_ON(sizeof(*req_power) != sizeof(*max_power)); BUILD_BUG_ON(sizeof(*req_power) != sizeof(*granted_power)); BUILD_BUG_ON(sizeof(*req_power) != sizeof(*extra_actor_power)); - req_power = devm_kcalloc(&tz->device, num_actors * 4, + BUILD_BUG_ON(sizeof(*req_power) != sizeof(*weighted_req_power)); + req_power = devm_kcalloc(&tz->device, num_actors * 5, sizeof(*req_power), GFP_KERNEL); if (!req_power) { ret = -ENOMEM; @@ -266,8 +268,10 @@ static int allocate_power(struct thermal_zone_device *tz, max_power = &req_power[num_actors]; granted_power = &req_power[2 * num_actors]; extra_actor_power = &req_power[3 * num_actors]; + weighted_req_power = &req_power[4 * num_actors]; i = 0; + total_weighted_req_power = 0; total_req_power = 0; max_allocatable_power = 0; @@ -289,13 +293,14 @@ static int allocate_power(struct thermal_zone_device *tz, else weight = instance->weight; - req_power[i] = frac_to_int(weight * req_power[i]); + weighted_req_power[i] = frac_to_int(weight * req_power[i]); if (power_actor_get_max_power(cdev, tz, &max_power[i])) continue; total_req_power += req_power[i]; max_allocatable_power += max_power[i]; + total_weighted_req_power += weighted_req_power[i]; i++; } @@ -303,8 +308,9 @@ static int allocate_power(struct thermal_zone_device *tz, power_range = pid_controller(tz, current_temp, control_temp, max_allocatable_power); - divvy_up_power(req_power, max_power, num_actors, total_req_power, - power_range, granted_power, extra_actor_power); + divvy_up_power(weighted_req_power, max_power, num_actors, + total_weighted_req_power, power_range, granted_power, + extra_actor_power); total_granted_power = 0; i = 0; From 5f09a5cbd14ae16e93866040fa44d930ff885650 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 8 Jun 2015 10:35:49 +0900 Subject: [PATCH 3/5] thermal: exynos: Disable the regulator on probe failure During probe the regulator (if present) was enabled but not disabled in case of failure. So an unsuccessful probe lead to enabling the regulator which was actually not needed because the device was not enabled. Additionally each deferred probe lead to increase of regulator enable count so it would not be effectively disabled during removal of the device. Test HW: Exynos4412 - Trats2 board Signed-off-by: Krzysztof Kozlowski Fixes: 498d22f616f6 ("thermal: exynos: Support for TMU regulator defined at device tree") Cc: Reviewed-by: Javier Martinez Canillas Signed-off-by: Lukasz Majewski Tested-by: Lukasz Majewski Signed-off-by: Eduardo Valentin --- drivers/thermal/samsung/exynos_tmu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 531f4b179871..13c3aceed19d 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -1392,6 +1392,8 @@ err_clk_sec: if (!IS_ERR(data->clk_sec)) clk_unprepare(data->clk_sec); err_sensor: + if (!IS_ERR_OR_NULL(data->regulator)) + regulator_disable(data->regulator); thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd); return ret; From f87e6bd3f7401ee3c04248d8ea2dc32883a1f8fb Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 2 Jul 2015 15:40:00 +0900 Subject: [PATCH 4/5] thermal: exynos: Add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OF The exynos thermal driver use the of_thermal_*() API to parse the basic data for thermal management from devicetree file. So, if CONFIG_EXYNOS_THERMAL is selected without CONFIG_THERMAL_OF, kernel can build it without any problem. But, exynos thermal driver is not working with following error log. This patch add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OF. [ 1.458644] get_th_reg: Cannot get trip points from of-thermal.c! [ 1.459096] get_th_reg: Cannot get trip points from of-thermal.c! [ 1.465211] exynos4412_tmu_initialize: No CRITICAL trip point defined at of-thermal.c! Cc: Zhang Rui Cc: Eduardo Valentin Cc: Lukasz Majewski Signed-off-by: Chanwoo Choi Signed-off-by: Lukasz Majewski Signed-off-by: Eduardo Valentin --- drivers/thermal/samsung/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig index c8e35c1a43dc..e0da3865e060 100644 --- a/drivers/thermal/samsung/Kconfig +++ b/drivers/thermal/samsung/Kconfig @@ -1,6 +1,6 @@ config EXYNOS_THERMAL tristate "Exynos thermal management unit driver" - depends on OF + depends on THERMAL_OF help If you say yes here you get support for the TMU (Thermal Management Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises From 3c19d237dd8148926e49259e495ee41dddd1f09c Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 2 Jul 2015 15:40:01 +0900 Subject: [PATCH 5/5] thermal: exynos: Remove unused code related to platform_data on probe() This patch removes the unused code related to struct exynos_tmu_platform_data because exynos_tmu_probe() don't handle the struct exynos_tmu_platform_data *pdata. Test HW: Exynos4412 - Trats2 board Cc: Zhang Rui Cc: Eduardo Valentin Cc: Lukasz Majewski Signed-off-by: Chanwoo Choi Signed-off-by: Lukasz Majewski Tested-by: Lukasz Majewski Signed-off-by: Eduardo Valentin --- drivers/thermal/samsung/exynos_tmu.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 13c3aceed19d..c96ff10b869e 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -1296,7 +1296,6 @@ static struct thermal_zone_of_device_ops exynos_sensor_ops = { static int exynos_tmu_probe(struct platform_device *pdev) { - struct exynos_tmu_platform_data *pdata; struct exynos_tmu_data *data; int ret; @@ -1318,8 +1317,6 @@ static int exynos_tmu_probe(struct platform_device *pdev) if (ret) goto err_sensor; - pdata = data->pdata; - INIT_WORK(&data->irq_work, exynos_tmu_work); data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");