arm64: dts: rockchip: Add EmbedFire LubanCat 1
The LubanCat 1 is a RK3566 based SBC, developed by Dongguan EmbedFire Electronic Technology Co., Ltd. It has the following characteristics: - MicroSD card slot, onboard eMMC flash memory - 1GbE Realtek RTL8211F Ethernet Transceiver - 1 USB Type-C port (power and USB2.0 OTG) - 1 USB 3.0 Host port - 3 USB 2.0 Host ports - 1 HDMI - 1 infrared receiver - 1 MIPI DSI - 1 MIPI CSI - 1 x 4-section headphone jack - Mini PCIe socket (USB or PCIe) - 1 SIM Card slot - 1 SYS LED and 1 PWR LED - 40-pin GPIO expansion header Signed-off-by: Wenhao Cui <lasstp5011@gmail.com> Signed-off-by: Yuteng Zhong <zonyitoo@gmail.com> Link: https://lore.kernel.org/r/Y6UdjhBD/Xa7ALya@VM-66-53-centos Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Wenhao Cui
Heiko Stuebner
parent
1e83f6bfaf
commit
8d94da58de
@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
|
||||
|
||||
595
arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
Normal file
595
arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
Normal file
@ -0,0 +1,595 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "EmbedFire LubanCat 1";
|
||||
compatible = "embedfire,lubancat-1", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sys_led: sys-led {
|
||||
label = "sys_led";
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_5v: usb-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&usb_5v>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb20_host_en>;
|
||||
regulator-name = "vcc5v0_usb20_host";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb30_host_en>;
|
||||
regulator-name = "vcc5v0_usb30_host";
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
snps,reset-gpio = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 75ms, 100ms */
|
||||
snps,reset-delays-us = <0 75000 100000>;
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2_level3
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk_level2
|
||||
&gmac1m1_rgmii_bus_level3>;
|
||||
tx_delay = <0x1a>;
|
||||
rx_delay = <0x0c>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
sys_led_pin: sys-status-led-pin {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
|
||||
rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
|
||||
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_3v3>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
|
||||
assigned-clock-rates = <200000000>, <24000000>, <200000000>;
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
|
||||
supports-emmc;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
max-frequency = <150000000>;
|
||||
supports-sd;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB OTG/USB Host_1 USB 2.0 Comb */
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB Host_2/USB Host_3 USB 2.0 Comb */
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB3.0 Host */
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
Loading…
x
Reference in New Issue
Block a user