diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 0fd76c405208..6630d842c7a3 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -8,7 +8,12 @@ The actual devices are instantiated from the child nodes of a WEIM node.
 
 Required properties:
 
- - compatible:		Should be set to "fsl,<soc>-weim"
+ - compatible:		Should contain one of the following:
+			  "fsl,imx1-weim"
+			  "fsl,imx27-weim"
+			  "fsl,imx51-weim"
+			  "fsl,imx50-weim"
+			  "fsl,imx6q-weim"
  - reg:			A resource specifier for the register space
 			(see the example below)
  - clocks:		the clock, see the example below.
@@ -19,6 +24,26 @@ Required properties:
 
 			   <cs-number> 0 <physical address of mapping> <size>
 
+Optional properties:
+
+ - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+			devices, it should be the phandle to the system General
+			Purpose Register controller that contains WEIM CS GPR
+			register, e.g. IOMUXC_GPR1 on i.MX6Q.  IOMUXC_GPR1[11:0]
+			should be set up as one of the following 4 possible
+			values depending on the CS space configuration.
+
+			IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
+			---------------------------------------------
+				05	    128M     0M     0M     0M
+				033          64M    64M     0M     0M
+				0113         64M    32M    32M     0M
+				01111        32M    32M    32M    32M
+
+			In case that the property is absent, the reset value or
+			what bootloader sets up in IOMUXC_GPR1[11:0] will be
+			used.
+
 Timing property for child nodes. It is mandatory, not optional.
 
  - fsl,weim-cs-timing:	The timing array, contains timing values for the
@@ -43,6 +68,7 @@ Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0x08000000 0x08000000>;
+		fsl,weim-cs-gpr = <&gpr>;
 
 		nor@0,0 {
 			compatible = "cfi-flash";
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 3ef58c8dbf11..f8ee13c7bf7b 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -11,6 +11,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/regmap.h>
 
 struct imx_weim_devtype {
 	unsigned int	cs_count;
@@ -56,6 +59,55 @@ static const struct of_device_id weim_id_table[] = {
 };
 MODULE_DEVICE_TABLE(of, weim_id_table);
 
+static int __init imx_weim_gpr_setup(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct property *prop;
+	const __be32 *p;
+	struct regmap *gpr;
+	u32 gprvals[4] = {
+		05,	/* CS0(128M) CS1(0M)  CS2(0M)  CS3(0M)  */
+		033,	/* CS0(64M)  CS1(64M) CS2(0M)  CS3(0M)  */
+		0113,	/* CS0(64M)  CS1(32M) CS2(32M) CS3(0M)  */
+		01111,	/* CS0(32M)  CS1(32M) CS2(32M) CS3(32M) */
+	};
+	u32 gprval = 0;
+	u32 val;
+	int cs = 0;
+	int i = 0;
+
+	gpr = syscon_regmap_lookup_by_phandle(np, "fsl,weim-cs-gpr");
+	if (IS_ERR(gpr)) {
+		dev_dbg(&pdev->dev, "failed to find weim-cs-gpr\n");
+		return 0;
+	}
+
+	of_property_for_each_u32(np, "ranges", prop, p, val) {
+		if (i % 4 == 0) {
+			cs = val;
+		} else if (i % 4 == 3 && val) {
+			val = (val / SZ_32M) | 1;
+			gprval |= val << cs * 3;
+		}
+		i++;
+	}
+
+	if (i == 0 || i % 4)
+		goto err;
+
+	for (i = 0; i < ARRAY_SIZE(gprvals); i++) {
+		if (gprval == gprvals[i]) {
+			/* Found it. Set up IOMUXC_GPR1[11:0] with it. */
+			regmap_update_bits(gpr, IOMUXC_GPR1, 0xfff, gprval);
+			return 0;
+		}
+	}
+
+err:
+	dev_err(&pdev->dev, "Invalid 'ranges' configuration\n");
+	return -EINVAL;
+}
+
 /* Parse and set the timing for this device. */
 static int __init weim_timing_setup(struct device_node *np, void __iomem *base,
 				    const struct imx_weim_devtype *devtype)
@@ -92,6 +144,12 @@ static int __init weim_parse_dt(struct platform_device *pdev,
 	struct device_node *child;
 	int ret;
 
+	if (devtype == &imx50_weim_devtype) {
+		ret = imx_weim_gpr_setup(pdev);
+		if (ret)
+			return ret;
+	}
+
 	for_each_child_of_node(pdev->dev.of_node, child) {
 		if (!child->name)
 			continue;