ALSA: usb-audio: Add support for Presonus Studio 1810c
This patch adds support for Presonus Studio 1810c, a usb interface that's UAC2 compliant with a few quirks and a few extra hw-specific controls. I've tested all 3 altsettings and the added switch controls and they work as expected. More infos on the card: https://www.presonus.com/products/Studio-1810c Note that this work is based on packet inspection with usbmon. I just wanted to get this card to work for using it on our open-source radio station: https://github.com/UoC-Radio v2 address issues reported by Takashi: * Properly get/set enum type controls * Prevent race condition on switch_get/set * Various control naming changes * Various coding style fixes v3 improve readability of sample rate filtering and some other minor changes. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Link: https://lore.kernel.org/r/5e47481a.1c69fb81.befb3.8dac@mx.google.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Nick Kossifidis
Takashi Iwai
parent
146f66975b
commit
8dc5efe3d1
@ -13,6 +13,7 @@ snd-usb-audio-objs := card.o \
|
|||||||
mixer_scarlett.o \
|
mixer_scarlett.o \
|
||||||
mixer_scarlett_gen2.o \
|
mixer_scarlett_gen2.o \
|
||||||
mixer_us16x08.o \
|
mixer_us16x08.o \
|
||||||
|
mixer_s1810c.o \
|
||||||
pcm.o \
|
pcm.o \
|
||||||
power.o \
|
power.o \
|
||||||
proc.o \
|
proc.o \
|
||||||
|
|||||||
@ -226,6 +226,36 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
|
|||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Presonus Studio 1810c supports a limited set of sampling
|
||||||
|
* rates per altsetting but reports the full set each time.
|
||||||
|
* If we don't filter out the unsupported rates and attempt
|
||||||
|
* to configure the card, it will hang refusing to do any
|
||||||
|
* further audio I/O until a hard reset is performed.
|
||||||
|
*
|
||||||
|
* The list of supported rates per altsetting (set of available
|
||||||
|
* I/O channels) is described in the owner's manual, section 2.2.
|
||||||
|
*/
|
||||||
|
static bool s1810c_valid_sample_rate(struct audioformat *fp,
|
||||||
|
unsigned int rate)
|
||||||
|
{
|
||||||
|
switch (fp->altsetting) {
|
||||||
|
case 1:
|
||||||
|
/* All ADAT ports available */
|
||||||
|
return rate <= 48000;
|
||||||
|
case 2:
|
||||||
|
/* Half of ADAT ports available */
|
||||||
|
return (rate == 88200 || rate == 96000);
|
||||||
|
case 3:
|
||||||
|
/* Analog I/O only (no S/PDIF nor ADAT) */
|
||||||
|
return rate >= 176400;
|
||||||
|
default:
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Helper function to walk the array of sample rate triplets reported by
|
* Helper function to walk the array of sample rate triplets reported by
|
||||||
* the device. The problem is that we need to parse whole array first to
|
* the device. The problem is that we need to parse whole array first to
|
||||||
@ -262,6 +292,12 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
|
|||||||
}
|
}
|
||||||
|
|
||||||
for (rate = min; rate <= max; rate += res) {
|
for (rate = min; rate <= max; rate += res) {
|
||||||
|
|
||||||
|
/* Filter out invalid rates on Presonus Studio 1810c */
|
||||||
|
if (chip->usb_id == USB_ID(0x0194f, 0x010c) &&
|
||||||
|
!s1810c_valid_sample_rate(fp, rate))
|
||||||
|
goto skip_rate;
|
||||||
|
|
||||||
if (fp->rate_table)
|
if (fp->rate_table)
|
||||||
fp->rate_table[nr_rates] = rate;
|
fp->rate_table[nr_rates] = rate;
|
||||||
if (!fp->rate_min || rate < fp->rate_min)
|
if (!fp->rate_min || rate < fp->rate_min)
|
||||||
@ -276,6 +312,7 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
|
|||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
skip_rate:
|
||||||
/* avoid endless loop */
|
/* avoid endless loop */
|
||||||
if (res == 0)
|
if (res == 0)
|
||||||
break;
|
break;
|
||||||
|
|||||||
@ -34,6 +34,7 @@
|
|||||||
#include "mixer_scarlett.h"
|
#include "mixer_scarlett.h"
|
||||||
#include "mixer_scarlett_gen2.h"
|
#include "mixer_scarlett_gen2.h"
|
||||||
#include "mixer_us16x08.h"
|
#include "mixer_us16x08.h"
|
||||||
|
#include "mixer_s1810c.h"
|
||||||
#include "helper.h"
|
#include "helper.h"
|
||||||
|
|
||||||
struct std_mono_table {
|
struct std_mono_table {
|
||||||
@ -2277,6 +2278,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
|
|||||||
case USB_ID(0x2a39, 0x3fd4): /* RME */
|
case USB_ID(0x2a39, 0x3fd4): /* RME */
|
||||||
err = snd_rme_controls_create(mixer);
|
err = snd_rme_controls_create(mixer);
|
||||||
break;
|
break;
|
||||||
|
|
||||||
|
case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */
|
||||||
|
err = snd_sc1810_init_mixer(mixer);
|
||||||
|
break;
|
||||||
}
|
}
|
||||||
|
|
||||||
return err;
|
return err;
|
||||||
|
|||||||
595
sound/usb/mixer_s1810c.c
Normal file
595
sound/usb/mixer_s1810c.c
Normal file
@ -0,0 +1,595 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0
|
||||||
|
/*
|
||||||
|
* Presonus Studio 1810c driver for ALSA
|
||||||
|
* Copyright (C) 2019 Nick Kossifidis <mickflemm@gmail.com>
|
||||||
|
*
|
||||||
|
* Based on reverse engineering of the communication protocol
|
||||||
|
* between the windows driver / Univeral Control (UC) program
|
||||||
|
* and the device, through usbmon.
|
||||||
|
*
|
||||||
|
* For now this bypasses the mixer, with all channels split,
|
||||||
|
* so that the software can mix with greater flexibility.
|
||||||
|
* It also adds controls for the 4 buttons on the front of
|
||||||
|
* the device.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/usb.h>
|
||||||
|
#include <linux/usb/audio-v2.h>
|
||||||
|
#include <linux/slab.h>
|
||||||
|
#include <sound/core.h>
|
||||||
|
#include <sound/control.h>
|
||||||
|
|
||||||
|
#include "usbaudio.h"
|
||||||
|
#include "mixer.h"
|
||||||
|
#include "mixer_quirks.h"
|
||||||
|
#include "helper.h"
|
||||||
|
#include "mixer_s1810c.h"
|
||||||
|
|
||||||
|
#define SC1810C_CMD_REQ 160
|
||||||
|
#define SC1810C_CMD_REQTYPE \
|
||||||
|
(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT)
|
||||||
|
#define SC1810C_CMD_F1 0x50617269
|
||||||
|
#define SC1810C_CMD_F2 0x14
|
||||||
|
|
||||||
|
/*
|
||||||
|
* DISCLAIMER: These are just guesses based on the
|
||||||
|
* dumps I got.
|
||||||
|
*
|
||||||
|
* It seems like a selects between
|
||||||
|
* device (0), mixer (0x64) and output (0x65)
|
||||||
|
*
|
||||||
|
* For mixer (0x64):
|
||||||
|
* * b selects an input channel (see below).
|
||||||
|
* * c selects an output channel pair (see below).
|
||||||
|
* * d selects left (0) or right (1) of that pair.
|
||||||
|
* * e 0-> disconnect, 0x01000000-> connect,
|
||||||
|
* 0x0109-> used for stereo-linking channels,
|
||||||
|
* e is also used for setting volume levels
|
||||||
|
* in which case b is also set so I guess
|
||||||
|
* this way it is possible to set the volume
|
||||||
|
* level from the specified input to the
|
||||||
|
* specified output.
|
||||||
|
*
|
||||||
|
* IN Channels:
|
||||||
|
* 0 - 7 Mic/Inst/Line (Analog inputs)
|
||||||
|
* 8 - 9 S/PDIF
|
||||||
|
* 10 - 17 ADAT
|
||||||
|
* 18 - 35 DAW (Inputs from the host)
|
||||||
|
*
|
||||||
|
* OUT Channels (pairs):
|
||||||
|
* 0 -> Main out
|
||||||
|
* 1 -> Line1/2
|
||||||
|
* 2 -> Line3/4
|
||||||
|
* 3 -> S/PDIF
|
||||||
|
* 4 -> ADAT?
|
||||||
|
*
|
||||||
|
* For device (0):
|
||||||
|
* * b and c are not used, at least not on the
|
||||||
|
* dumps I got.
|
||||||
|
* * d sets the control id to be modified
|
||||||
|
* (see below).
|
||||||
|
* * e sets the setting for that control.
|
||||||
|
* (so for the switches I was interested
|
||||||
|
* in it's 0/1)
|
||||||
|
*
|
||||||
|
* For output (0x65):
|
||||||
|
* * b is the output channel (see above).
|
||||||
|
* * c is zero.
|
||||||
|
* * e I guess the same as with mixer except 0x0109
|
||||||
|
* which I didn't see in my dumps.
|
||||||
|
*
|
||||||
|
* The two fixed fields have the same values for
|
||||||
|
* mixer and output but a different set for device.
|
||||||
|
*/
|
||||||
|
struct s1810c_ctl_packet {
|
||||||
|
u32 a;
|
||||||
|
u32 b;
|
||||||
|
u32 fixed1;
|
||||||
|
u32 fixed2;
|
||||||
|
u32 c;
|
||||||
|
u32 d;
|
||||||
|
u32 e;
|
||||||
|
};
|
||||||
|
|
||||||
|
#define SC1810C_CTL_LINE_SW 0
|
||||||
|
#define SC1810C_CTL_MUTE_SW 1
|
||||||
|
#define SC1810C_CTL_AB_SW 3
|
||||||
|
#define SC1810C_CTL_48V_SW 4
|
||||||
|
|
||||||
|
#define SC1810C_SET_STATE_REQ 161
|
||||||
|
#define SC1810C_SET_STATE_REQTYPE SC1810C_CMD_REQTYPE
|
||||||
|
#define SC1810C_SET_STATE_F1 0x64656D73
|
||||||
|
#define SC1810C_SET_STATE_F2 0xF4
|
||||||
|
|
||||||
|
#define SC1810C_GET_STATE_REQ 162
|
||||||
|
#define SC1810C_GET_STATE_REQTYPE \
|
||||||
|
(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN)
|
||||||
|
#define SC1810C_GET_STATE_F1 SC1810C_SET_STATE_F1
|
||||||
|
#define SC1810C_GET_STATE_F2 SC1810C_SET_STATE_F2
|
||||||
|
|
||||||
|
#define SC1810C_STATE_F1_IDX 2
|
||||||
|
#define SC1810C_STATE_F2_IDX 3
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This packet includes mixer volumes and
|
||||||
|
* various other fields, it's an extended
|
||||||
|
* version of ctl_packet, with a and b
|
||||||
|
* being zero and different f1/f2.
|
||||||
|
*/
|
||||||
|
struct s1810c_state_packet {
|
||||||
|
u32 fields[63];
|
||||||
|
};
|
||||||
|
|
||||||
|
#define SC1810C_STATE_48V_SW 58
|
||||||
|
#define SC1810C_STATE_LINE_SW 59
|
||||||
|
#define SC1810C_STATE_MUTE_SW 60
|
||||||
|
#define SC1810C_STATE_AB_SW 62
|
||||||
|
|
||||||
|
struct s1810_mixer_state {
|
||||||
|
uint16_t seqnum;
|
||||||
|
struct mutex usb_mutex;
|
||||||
|
struct mutex data_mutex;
|
||||||
|
};
|
||||||
|
|
||||||
|
static int
|
||||||
|
snd_s1810c_send_ctl_packet(struct usb_device *dev, u32 a,
|
||||||
|
u32 b, u32 c, u32 d, u32 e)
|
||||||
|
{
|
||||||
|
struct s1810c_ctl_packet pkt = { 0 };
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
pkt.fixed1 = SC1810C_CMD_F1;
|
||||||
|
pkt.fixed2 = SC1810C_CMD_F2;
|
||||||
|
|
||||||
|
pkt.a = a;
|
||||||
|
pkt.b = b;
|
||||||
|
pkt.c = c;
|
||||||
|
pkt.d = d;
|
||||||
|
/*
|
||||||
|
* Value for settings 0/1 for this
|
||||||
|
* output channel is always 0 (probably because
|
||||||
|
* there is no ADAT output on 1810c)
|
||||||
|
*/
|
||||||
|
pkt.e = (c == 4) ? 0 : e;
|
||||||
|
|
||||||
|
ret = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
|
||||||
|
SC1810C_CMD_REQ,
|
||||||
|
SC1810C_CMD_REQTYPE, 0, 0, &pkt, sizeof(pkt));
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_warn(&dev->dev, "could not send ctl packet\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* When opening Universal Control the program periodicaly
|
||||||
|
* sends and receives state packets for syncinc state between
|
||||||
|
* the device and the host.
|
||||||
|
*
|
||||||
|
* Note that if we send only the request to get data back we'll
|
||||||
|
* get an error, we need to first send an empty state packet and
|
||||||
|
* then ask to receive a filled. Their seqnumbers must also match.
|
||||||
|
*/
|
||||||
|
static int
|
||||||
|
snd_sc1810c_get_status_field(struct usb_device *dev,
|
||||||
|
u32 *field, int field_idx, uint16_t *seqnum)
|
||||||
|
{
|
||||||
|
struct s1810c_state_packet pkt_out = { 0 };
|
||||||
|
struct s1810c_state_packet pkt_in = { 0 };
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
pkt_out.fields[SC1810C_STATE_F1_IDX] = SC1810C_SET_STATE_F1;
|
||||||
|
pkt_out.fields[SC1810C_STATE_F2_IDX] = SC1810C_SET_STATE_F2;
|
||||||
|
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
|
||||||
|
SC1810C_SET_STATE_REQ,
|
||||||
|
SC1810C_SET_STATE_REQTYPE,
|
||||||
|
(*seqnum), 0, &pkt_out, sizeof(pkt_out));
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_warn(&dev->dev, "could not send state packet (%d)\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
|
||||||
|
SC1810C_GET_STATE_REQ,
|
||||||
|
SC1810C_GET_STATE_REQTYPE,
|
||||||
|
(*seqnum), 0, &pkt_in, sizeof(pkt_in));
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_warn(&dev->dev, "could not get state field %u (%d)\n",
|
||||||
|
field_idx, ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
(*field) = pkt_in.fields[field_idx];
|
||||||
|
(*seqnum)++;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This is what I got when bypassing the mixer with
|
||||||
|
* all channels split. I'm not 100% sure of what's going
|
||||||
|
* on, I could probably clean this up based on my observations
|
||||||
|
* but I prefer to keep the same behavior as the windows driver.
|
||||||
|
*/
|
||||||
|
static int snd_s1810c_init_mixer_maps(struct snd_usb_audio *chip)
|
||||||
|
{
|
||||||
|
u32 a, b, c, e, n, off;
|
||||||
|
struct usb_device *dev = chip->dev;
|
||||||
|
|
||||||
|
/* Set initial volume levels ? */
|
||||||
|
a = 0x64;
|
||||||
|
e = 0xbc;
|
||||||
|
for (n = 0; n < 2; n++) {
|
||||||
|
off = n * 18;
|
||||||
|
for (b = off, c = 0; b < 18 + off; b++) {
|
||||||
|
/* This channel to all outputs ? */
|
||||||
|
for (c = 0; c <= 8; c++) {
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
|
||||||
|
}
|
||||||
|
/* This channel to main output (again) */
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e);
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
* I noticed on UC that DAW channels have different
|
||||||
|
* initial volumes, so this makes sense.
|
||||||
|
*/
|
||||||
|
e = 0xb53bf0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Connect analog outputs ? */
|
||||||
|
a = 0x65;
|
||||||
|
e = 0x01000000;
|
||||||
|
for (b = 1; b < 3; b++) {
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e);
|
||||||
|
}
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, 0, 0, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, 0, 0, 1, e);
|
||||||
|
|
||||||
|
/* Set initial volume levels for S/PDIF mappings ? */
|
||||||
|
a = 0x64;
|
||||||
|
e = 0xbc;
|
||||||
|
c = 3;
|
||||||
|
for (n = 0; n < 2; n++) {
|
||||||
|
off = n * 18;
|
||||||
|
for (b = off; b < 18 + off; b++) {
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
|
||||||
|
}
|
||||||
|
e = 0xb53bf0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Connect S/PDIF output ? */
|
||||||
|
a = 0x65;
|
||||||
|
e = 0x01000000;
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e);
|
||||||
|
|
||||||
|
/* Connect all outputs (again) ? */
|
||||||
|
a = 0x65;
|
||||||
|
e = 0x01000000;
|
||||||
|
for (b = 0; b < 4; b++) {
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Basic routing to get sound out of the device */
|
||||||
|
a = 0x64;
|
||||||
|
e = 0x01000000;
|
||||||
|
for (c = 0; c < 4; c++) {
|
||||||
|
for (b = 0; b < 36; b++) {
|
||||||
|
if ((c == 0 && b == 18) || /* DAW1/2 -> Main */
|
||||||
|
(c == 1 && b == 20) || /* DAW3/4 -> Line3/4 */
|
||||||
|
(c == 2 && b == 22) || /* DAW4/5 -> Line5/6 */
|
||||||
|
(c == 3 && b == 24)) { /* DAW5/6 -> S/PDIF */
|
||||||
|
/* Left */
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0);
|
||||||
|
b++;
|
||||||
|
/* Right */
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
|
||||||
|
} else {
|
||||||
|
/* Leave the rest disconnected */
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Set initial volume levels for S/PDIF (again) ? */
|
||||||
|
a = 0x64;
|
||||||
|
e = 0xbc;
|
||||||
|
c = 3;
|
||||||
|
for (n = 0; n < 2; n++) {
|
||||||
|
off = n * 18;
|
||||||
|
for (b = off; b < 18 + off; b++) {
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
|
||||||
|
}
|
||||||
|
e = 0xb53bf0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Connect S/PDIF outputs (again) ? */
|
||||||
|
a = 0x65;
|
||||||
|
e = 0x01000000;
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e);
|
||||||
|
|
||||||
|
/* Again ? */
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e);
|
||||||
|
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Sync state with the device and retrieve the requested field,
|
||||||
|
* whose index is specified in (kctl->private_value & 0xFF),
|
||||||
|
* from the received fields array.
|
||||||
|
*/
|
||||||
|
static int
|
||||||
|
snd_s1810c_get_switch_state(struct usb_mixer_interface *mixer,
|
||||||
|
struct snd_kcontrol *kctl, u32 *state)
|
||||||
|
{
|
||||||
|
struct snd_usb_audio *chip = mixer->chip;
|
||||||
|
struct s1810_mixer_state *private = mixer->private_data;
|
||||||
|
u32 field = 0;
|
||||||
|
u32 ctl_idx = (u32) (kctl->private_value & 0xFF);
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
mutex_lock(&private->usb_mutex);
|
||||||
|
ret = snd_sc1810c_get_status_field(chip->dev, &field,
|
||||||
|
ctl_idx, &private->seqnum);
|
||||||
|
if (ret < 0)
|
||||||
|
goto unlock;
|
||||||
|
|
||||||
|
*state = field;
|
||||||
|
unlock:
|
||||||
|
mutex_unlock(&private->usb_mutex);
|
||||||
|
return ret ? ret : 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Send a control packet to the device for the control id
|
||||||
|
* specified in (kctl->private_value >> 8) with value
|
||||||
|
* specified in (kctl->private_value >> 16).
|
||||||
|
*/
|
||||||
|
static int
|
||||||
|
snd_s1810c_set_switch_state(struct usb_mixer_interface *mixer,
|
||||||
|
struct snd_kcontrol *kctl)
|
||||||
|
{
|
||||||
|
struct snd_usb_audio *chip = mixer->chip;
|
||||||
|
struct s1810_mixer_state *private = mixer->private_data;
|
||||||
|
u32 pval = (u32) kctl->private_value;
|
||||||
|
u32 ctl_id = (pval >> 8) & 0xFF;
|
||||||
|
u32 ctl_val = (pval >> 16) & 0x1;
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
mutex_lock(&private->usb_mutex);
|
||||||
|
ret = snd_s1810c_send_ctl_packet(chip->dev, 0, 0, 0, ctl_id, ctl_val);
|
||||||
|
mutex_unlock(&private->usb_mutex);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Generic get/set/init functions for switch controls */
|
||||||
|
|
||||||
|
static int
|
||||||
|
snd_s1810c_switch_get(struct snd_kcontrol *kctl,
|
||||||
|
struct snd_ctl_elem_value *ctl_elem)
|
||||||
|
{
|
||||||
|
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl);
|
||||||
|
struct usb_mixer_interface *mixer = list->mixer;
|
||||||
|
struct s1810_mixer_state *private = mixer->private_data;
|
||||||
|
u32 pval = (u32) kctl->private_value;
|
||||||
|
u32 ctl_idx = pval & 0xFF;
|
||||||
|
u32 state = 0;
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
mutex_lock(&private->data_mutex);
|
||||||
|
ret = snd_s1810c_get_switch_state(mixer, kctl, &state);
|
||||||
|
if (ret < 0)
|
||||||
|
goto unlock;
|
||||||
|
|
||||||
|
switch (ctl_idx) {
|
||||||
|
case SC1810C_STATE_LINE_SW:
|
||||||
|
case SC1810C_STATE_AB_SW:
|
||||||
|
ctl_elem->value.enumerated.item[0] = (int)state;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
ctl_elem->value.integer.value[0] = (long)state;
|
||||||
|
}
|
||||||
|
|
||||||
|
unlock:
|
||||||
|
mutex_unlock(&private->data_mutex);
|
||||||
|
return (ret < 0) ? ret : 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int
|
||||||
|
snd_s1810c_switch_set(struct snd_kcontrol *kctl,
|
||||||
|
struct snd_ctl_elem_value *ctl_elem)
|
||||||
|
{
|
||||||
|
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl);
|
||||||
|
struct usb_mixer_interface *mixer = list->mixer;
|
||||||
|
struct s1810_mixer_state *private = mixer->private_data;
|
||||||
|
u32 pval = (u32) kctl->private_value;
|
||||||
|
u32 ctl_idx = pval & 0xFF;
|
||||||
|
u32 curval = 0;
|
||||||
|
u32 newval = 0;
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
mutex_lock(&private->data_mutex);
|
||||||
|
ret = snd_s1810c_get_switch_state(mixer, kctl, &curval);
|
||||||
|
if (ret < 0)
|
||||||
|
goto unlock;
|
||||||
|
|
||||||
|
switch (ctl_idx) {
|
||||||
|
case SC1810C_STATE_LINE_SW:
|
||||||
|
case SC1810C_STATE_AB_SW:
|
||||||
|
newval = (u32) ctl_elem->value.enumerated.item[0];
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
newval = (u32) ctl_elem->value.integer.value[0];
|
||||||
|
}
|
||||||
|
|
||||||
|
if (curval == newval)
|
||||||
|
goto unlock;
|
||||||
|
|
||||||
|
kctl->private_value &= ~(0x1 << 16);
|
||||||
|
kctl->private_value |= (unsigned int)(newval & 0x1) << 16;
|
||||||
|
ret = snd_s1810c_set_switch_state(mixer, kctl);
|
||||||
|
|
||||||
|
unlock:
|
||||||
|
mutex_unlock(&private->data_mutex);
|
||||||
|
return (ret < 0) ? 0 : 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int
|
||||||
|
snd_s1810c_switch_init(struct usb_mixer_interface *mixer,
|
||||||
|
const struct snd_kcontrol_new *new_kctl)
|
||||||
|
{
|
||||||
|
struct snd_kcontrol *kctl;
|
||||||
|
struct usb_mixer_elem_info *elem;
|
||||||
|
|
||||||
|
elem = kzalloc(sizeof(struct usb_mixer_elem_info), GFP_KERNEL);
|
||||||
|
if (!elem)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
elem->head.mixer = mixer;
|
||||||
|
elem->control = 0;
|
||||||
|
elem->head.id = 0;
|
||||||
|
elem->channels = 1;
|
||||||
|
|
||||||
|
kctl = snd_ctl_new1(new_kctl, elem);
|
||||||
|
if (!kctl) {
|
||||||
|
kfree(elem);
|
||||||
|
return -ENOMEM;
|
||||||
|
}
|
||||||
|
kctl->private_free = snd_usb_mixer_elem_free;
|
||||||
|
|
||||||
|
return snd_usb_mixer_add_control(&elem->head, kctl);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int
|
||||||
|
snd_s1810c_line_sw_info(struct snd_kcontrol *kctl,
|
||||||
|
struct snd_ctl_elem_info *uinfo)
|
||||||
|
{
|
||||||
|
static const char *const texts[2] = {
|
||||||
|
"Preamp On (Mic/Inst)",
|
||||||
|
"Preamp Off (Line in)"
|
||||||
|
};
|
||||||
|
|
||||||
|
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct snd_kcontrol_new snd_s1810c_line_sw = {
|
||||||
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||||
|
.name = "Line 1/2 Source Type",
|
||||||
|
.info = snd_s1810c_line_sw_info,
|
||||||
|
.get = snd_s1810c_switch_get,
|
||||||
|
.put = snd_s1810c_switch_set,
|
||||||
|
.private_value = (SC1810C_STATE_LINE_SW | SC1810C_CTL_LINE_SW << 8)
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct snd_kcontrol_new snd_s1810c_mute_sw = {
|
||||||
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||||
|
.name = "Mute Main Out Switch",
|
||||||
|
.info = snd_ctl_boolean_mono_info,
|
||||||
|
.get = snd_s1810c_switch_get,
|
||||||
|
.put = snd_s1810c_switch_set,
|
||||||
|
.private_value = (SC1810C_STATE_MUTE_SW | SC1810C_CTL_MUTE_SW << 8)
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct snd_kcontrol_new snd_s1810c_48v_sw = {
|
||||||
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||||
|
.name = "48V Phantom Power On Mic Inputs Switch",
|
||||||
|
.info = snd_ctl_boolean_mono_info,
|
||||||
|
.get = snd_s1810c_switch_get,
|
||||||
|
.put = snd_s1810c_switch_set,
|
||||||
|
.private_value = (SC1810C_STATE_48V_SW | SC1810C_CTL_48V_SW << 8)
|
||||||
|
};
|
||||||
|
|
||||||
|
static int
|
||||||
|
snd_s1810c_ab_sw_info(struct snd_kcontrol *kctl,
|
||||||
|
struct snd_ctl_elem_info *uinfo)
|
||||||
|
{
|
||||||
|
static const char *const texts[2] = {
|
||||||
|
"1/2",
|
||||||
|
"3/4"
|
||||||
|
};
|
||||||
|
|
||||||
|
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct snd_kcontrol_new snd_s1810c_ab_sw = {
|
||||||
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||||
|
.name = "Headphone 1 Source Route",
|
||||||
|
.info = snd_s1810c_ab_sw_info,
|
||||||
|
.get = snd_s1810c_switch_get,
|
||||||
|
.put = snd_s1810c_switch_set,
|
||||||
|
.private_value = (SC1810C_STATE_AB_SW | SC1810C_CTL_AB_SW << 8)
|
||||||
|
};
|
||||||
|
|
||||||
|
static void snd_sc1810_mixer_state_free(struct usb_mixer_interface *mixer)
|
||||||
|
{
|
||||||
|
struct s1810_mixer_state *private = mixer->private_data;
|
||||||
|
kfree(private);
|
||||||
|
mixer->private_data = NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Entry point, called from mixer_quirks.c */
|
||||||
|
int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer)
|
||||||
|
{
|
||||||
|
struct s1810_mixer_state *private = NULL;
|
||||||
|
struct snd_usb_audio *chip = mixer->chip;
|
||||||
|
struct usb_device *dev = chip->dev;
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
/* Run this only once */
|
||||||
|
if (!list_empty(&chip->mixer_list))
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
dev_info(&dev->dev,
|
||||||
|
"Presonus Studio 1810c, device_setup: %u\n", chip->setup);
|
||||||
|
if (chip->setup == 1)
|
||||||
|
dev_info(&dev->dev, "(8out/18in @ 48KHz)\n");
|
||||||
|
else if (chip->setup == 2)
|
||||||
|
dev_info(&dev->dev, "(6out/8in @ 192KHz)\n");
|
||||||
|
else
|
||||||
|
dev_info(&dev->dev, "(8out/14in @ 96KHz)\n");
|
||||||
|
|
||||||
|
ret = snd_s1810c_init_mixer_maps(chip);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
private = kzalloc(sizeof(struct s1810_mixer_state), GFP_KERNEL);
|
||||||
|
if (!private)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
mutex_init(&private->usb_mutex);
|
||||||
|
mutex_init(&private->data_mutex);
|
||||||
|
|
||||||
|
mixer->private_data = private;
|
||||||
|
mixer->private_free = snd_sc1810_mixer_state_free;
|
||||||
|
|
||||||
|
private->seqnum = 1;
|
||||||
|
|
||||||
|
ret = snd_s1810c_switch_init(mixer, &snd_s1810c_line_sw);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = snd_s1810c_switch_init(mixer, &snd_s1810c_mute_sw);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = snd_s1810c_switch_init(mixer, &snd_s1810c_48v_sw);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = snd_s1810c_switch_init(mixer, &snd_s1810c_ab_sw);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
7
sound/usb/mixer_s1810c.h
Normal file
7
sound/usb/mixer_s1810c.h
Normal file
@ -0,0 +1,7 @@
|
|||||||
|
/* SPDX-License-Identifier: GPL-2.0 */
|
||||||
|
/*
|
||||||
|
* Presonus Studio 1810c driver for ALSA
|
||||||
|
* Copyright (C) 2019 Nick Kossifidis <mickflemm@gmail.com>
|
||||||
|
*/
|
||||||
|
|
||||||
|
int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer);
|
||||||
@ -1252,6 +1252,38 @@ static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
|
|||||||
return 0; /* keep this altsetting */
|
return 0; /* keep this altsetting */
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static int s1810c_skip_setting_quirk(struct snd_usb_audio *chip,
|
||||||
|
int iface, int altno)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
* Altno settings:
|
||||||
|
*
|
||||||
|
* Playback (Interface 1):
|
||||||
|
* 1: 6 Analog + 2 S/PDIF
|
||||||
|
* 2: 6 Analog + 2 S/PDIF
|
||||||
|
* 3: 6 Analog
|
||||||
|
*
|
||||||
|
* Capture (Interface 2):
|
||||||
|
* 1: 8 Analog + 2 S/PDIF + 8 ADAT
|
||||||
|
* 2: 8 Analog + 2 S/PDIF + 4 ADAT
|
||||||
|
* 3: 8 Analog
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* I'll leave 2 as the default one and
|
||||||
|
* use device_setup to switch to the
|
||||||
|
* other two.
|
||||||
|
*/
|
||||||
|
if ((chip->setup == 0 || chip->setup > 2) && altno != 2)
|
||||||
|
return 1;
|
||||||
|
else if (chip->setup == 1 && altno != 1)
|
||||||
|
return 1;
|
||||||
|
else if (chip->setup == 2 && altno != 3)
|
||||||
|
return 1;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
|
int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
|
||||||
int iface,
|
int iface,
|
||||||
int altno)
|
int altno)
|
||||||
@ -1265,6 +1297,10 @@ int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
|
|||||||
/* fasttrackpro usb: skip altsets incompatible with device_setup */
|
/* fasttrackpro usb: skip altsets incompatible with device_setup */
|
||||||
if (chip->usb_id == USB_ID(0x0763, 0x2012))
|
if (chip->usb_id == USB_ID(0x0763, 0x2012))
|
||||||
return fasttrackpro_skip_setting_quirk(chip, iface, altno);
|
return fasttrackpro_skip_setting_quirk(chip, iface, altno);
|
||||||
|
/* presonus studio 1810c: skip altsets incompatible with device_setup */
|
||||||
|
if (chip->usb_id == USB_ID(0x0194f, 0x010c))
|
||||||
|
return s1810c_skip_setting_quirk(chip, iface, altno);
|
||||||
|
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user