ASoC: fsl-ssi: set bitclock in master mode from hw_params
The fsl_ssi driver uses the .set_sysclk callback to configure the bitclock for master mode. This is unnecessary since the bitclock is known in hw_params. This patch configures the bitclock from .hw_params. .set_dai_sysclk now sets a bitclock frequency which is preferred over the default calculated bitclock frequency. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-By: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
parent
85e59af240
commit
8dd51e23a1
@ -166,6 +166,7 @@ struct fsl_ssi_private {
|
||||
spinlock_t baudclk_lock;
|
||||
struct clk *baudclk;
|
||||
struct clk *clk;
|
||||
unsigned int bitclk_freq;
|
||||
struct snd_dmaengine_dai_dma_data dma_params_tx;
|
||||
struct snd_dmaengine_dai_dma_data dma_params_rx;
|
||||
struct imx_pcm_fiq_params fiq_params;
|
||||
@ -236,6 +237,12 @@ static bool fsl_ssi_is_ac97(struct fsl_ssi_private *ssi_private)
|
||||
return !!(ssi_private->dai_fmt & SND_SOC_DAIFMT_AC97);
|
||||
}
|
||||
|
||||
static bool fsl_ssi_is_i2s_master(struct fsl_ssi_private *ssi_private)
|
||||
{
|
||||
return (ssi_private->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
|
||||
SND_SOC_DAIFMT_CBS_CFS;
|
||||
}
|
||||
|
||||
/**
|
||||
* fsl_ssi_isr: SSI interrupt handler
|
||||
*
|
||||
@ -509,7 +516,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
|
||||
}
|
||||
|
||||
/**
|
||||
* fsl_ssi_set_dai_sysclk - configure Digital Audio Interface bit clock
|
||||
* fsl_ssi_set_bclk - configure Digital Audio Interface bit clock
|
||||
*
|
||||
* Note: This function can be only called when using SSI as DAI master
|
||||
*
|
||||
@ -517,8 +524,9 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
|
||||
* freq: Output BCLK frequency = samplerate * 32 (fixed) * channels
|
||||
* dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK.
|
||||
*/
|
||||
static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
||||
int clk_id, unsigned int freq, int dir)
|
||||
static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
|
||||
struct snd_soc_dai *cpu_dai,
|
||||
struct snd_pcm_hw_params *hw_params)
|
||||
{
|
||||
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
|
||||
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
|
||||
@ -526,6 +534,13 @@ static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
||||
u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
|
||||
unsigned long flags, clkrate, baudrate, tmprate;
|
||||
u64 sub, savesub = 100000;
|
||||
unsigned int freq;
|
||||
|
||||
/* Prefer the explicitly set bitclock frequency */
|
||||
if (ssi_private->bitclk_freq)
|
||||
freq = ssi_private->bitclk_freq;
|
||||
else
|
||||
freq = params_channels(hw_params) * 32 * params_rate(hw_params);
|
||||
|
||||
/* Don't apply it to any non-baudclk circumstance */
|
||||
if (IS_ERR(ssi_private->baudclk))
|
||||
@ -583,7 +598,7 @@ static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
||||
mask = CCSR_SSI_SxCCR_PM_MASK | CCSR_SSI_SxCCR_DIV2 |
|
||||
CCSR_SSI_SxCCR_PSR;
|
||||
|
||||
if (dir == SND_SOC_CLOCK_OUT || synchronous)
|
||||
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || synchronous)
|
||||
write_ssi_mask(&ssi->stccr, mask, stccr);
|
||||
else
|
||||
write_ssi_mask(&ssi->srccr, mask, stccr);
|
||||
@ -604,6 +619,16 @@ static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
||||
int clk_id, unsigned int freq, int dir)
|
||||
{
|
||||
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
|
||||
|
||||
ssi_private->bitclk_freq = freq;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* fsl_ssi_hw_params - program the sample size
|
||||
*
|
||||
@ -627,6 +652,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
|
||||
snd_pcm_format_width(params_format(hw_params));
|
||||
u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
|
||||
int enabled = read_ssi(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* If we're in synchronous mode, and the SSI is already enabled,
|
||||
@ -635,6 +661,12 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
|
||||
if (enabled && ssi_private->cpu_dai_drv.symmetric_rates)
|
||||
return 0;
|
||||
|
||||
if (fsl_ssi_is_i2s_master(ssi_private)) {
|
||||
ret = fsl_ssi_set_bclk(substream, cpu_dai, hw_params);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* FIXME: The documentation says that SxCCR[WL] should not be
|
||||
* modified while the SSI is enabled. The only time this can
|
||||
|
Loading…
Reference in New Issue
Block a user