powerpc/85xx: Add dts for p1020rdb-pc board
P1020RDB-PC Overview ------------------ 1Gbyte DDR3 SDRAM 32 Mbyte NAND flash 10 16Mbyte NOR flash 16 Mbyte SPI flash SD connector to interface with the SD memory card Real-time clock on I2C bus PCIe: - x1 PCIe slot - x1 mini-PCIe slot 10/100/1000 BaseT Ethernet ports: - eTSEC1, RGMII: one 10/100/1000 port using VitesseTM VSC7385 L2 switch - eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221 - eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021 USB 2.0 port: - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot Dual RJ45 UART ports: - DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Zhicheng Fan <b32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Zhicheng Fan
Kumar Gala
parent
7e6af14478
commit
950740098c
247
arch/powerpc/boot/dts/p1020rdb-pc.dtsi
Normal file
247
arch/powerpc/boot/dts/p1020rdb-pc.dtsi
Normal file
@ -0,0 +1,247 @@
|
||||
/*
|
||||
* P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x1000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
partition@0 {
|
||||
/* This location must not be altered */
|
||||
/* 256KB for Vitesse 7385 Switch firmware */
|
||||
reg = <0x0 0x00040000>;
|
||||
label = "NOR Vitesse-7385 Firmware";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
/* 256KB for DTB Image */
|
||||
reg = <0x00040000 0x00040000>;
|
||||
label = "NOR DTB Image";
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
/* 3.5 MB for Linux Kernel Image */
|
||||
reg = <0x00080000 0x00380000>;
|
||||
label = "NOR Linux Kernel Image";
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
/* 11MB for JFFS2 based Root file System */
|
||||
reg = <0x00400000 0x00b00000>;
|
||||
label = "NOR JFFS2 Root File System";
|
||||
};
|
||||
|
||||
partition@f00000 {
|
||||
/* This location must not be altered */
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
/* 512KB for u-boot Environment Variables */
|
||||
reg = <0x00f00000 0x00100000>;
|
||||
label = "NOR U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
nand@1,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1020-fcm-nand",
|
||||
"fsl,elbc-fcm-nand";
|
||||
reg = <0x1 0x0 0x40000>;
|
||||
|
||||
partition@0 {
|
||||
/* This location must not be altered */
|
||||
/* 1MB for u-boot Bootloader Image */
|
||||
reg = <0x0 0x00100000>;
|
||||
label = "NAND U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
/* 1MB for DTB Image */
|
||||
reg = <0x00100000 0x00100000>;
|
||||
label = "NAND DTB Image";
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
/* 4MB for Linux Kernel Image */
|
||||
reg = <0x00200000 0x00400000>;
|
||||
label = "NAND Linux Kernel Image";
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
/* 4MB for Compressed Root file System Image */
|
||||
reg = <0x00600000 0x00400000>;
|
||||
label = "NAND Compressed RFS Image";
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
/* 7MB for JFFS2 based Root file System */
|
||||
reg = <0x00a00000 0x00700000>;
|
||||
label = "NAND JFFS2 Root File System";
|
||||
};
|
||||
|
||||
partition@1100000 {
|
||||
/* 15MB for JFFS2 based Root file System */
|
||||
reg = <0x01100000 0x00f00000>;
|
||||
label = "NAND Writable User area";
|
||||
};
|
||||
};
|
||||
|
||||
L2switch@2,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "vitesse-7385";
|
||||
reg = <0x2 0x0 0x20000>;
|
||||
};
|
||||
|
||||
cpld@3,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cpld";
|
||||
reg = <0x3 0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
i2c@3000 {
|
||||
rtc@68 {
|
||||
compatible = "pericom,pt7c4338";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spansion,s25sl12801";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>; /* input clock */
|
||||
|
||||
partition@u-boot {
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
reg = <0x0 0x00080000>;
|
||||
label = "u-boot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@dtb {
|
||||
/* 512KB for DTB Image*/
|
||||
reg = <0x00080000 0x00080000>;
|
||||
label = "dtb";
|
||||
};
|
||||
|
||||
partition@kernel {
|
||||
/* 4MB for Linux Kernel Image */
|
||||
reg = <0x00100000 0x00400000>;
|
||||
label = "kernel";
|
||||
};
|
||||
|
||||
partition@fs {
|
||||
/* 4MB for Compressed RFS Image */
|
||||
reg = <0x00500000 0x00400000>;
|
||||
label = "file system";
|
||||
};
|
||||
|
||||
partition@jffs-fs {
|
||||
/* 7MB for JFFS2 based RFS */
|
||||
reg = <0x00900000 0x00700000>;
|
||||
label = "file system jffs2";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
/* USB2 is shared with localbus, so it must be disabled
|
||||
by default. We can't put 'status = "disabled";' here
|
||||
since U-Boot doesn't clear the status property when
|
||||
it enables USB2. OTOH, U-Boot does create a new node
|
||||
when there isn't any. So, just comment it out.
|
||||
usb@23000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
*/
|
||||
|
||||
mdio@24000 {
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
reg = <0x0>;
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <2 1>;
|
||||
reg = <0x1>;
|
||||
};
|
||||
|
||||
tbi0: tbi-phy@11 {
|
||||
device_type = "tbi-phy";
|
||||
reg = <0x11>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@25000 {
|
||||
tbi1: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
|
||||
enet0: ethernet@b0000 {
|
||||
fixed-link = <1 1 1000 0 0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
|
||||
};
|
||||
|
||||
enet1: ethernet@b1000 {
|
||||
phy-handle = <&phy0>;
|
||||
tbi-handle = <&tbi1>;
|
||||
phy-connection-type = "sgmii";
|
||||
};
|
||||
|
||||
enet2: ethernet@b2000 {
|
||||
phy-handle = <&phy1>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
};
|
||||
90
arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
Normal file
90
arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
Normal file
@ -0,0 +1,90 @@
|
||||
/*
|
||||
* P1020 RDB-PC Device Tree Source (32-bit address map)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "fsl/p1020si-pre.dtsi"
|
||||
/ {
|
||||
model = "fsl,P1020RDB-PC";
|
||||
compatible = "fsl,P1020RDB-PC";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
lbc: localbus@ffe05000 {
|
||||
reg = <0 0xffe05000 0 0x1000>;
|
||||
|
||||
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
|
||||
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
|
||||
0x1 0x0 0x0 0xff800000 0x00040000
|
||||
0x2 0x0 0x0 0xffb00000 0x00020000
|
||||
0x3 0x0 0x0 0xffa00000 0x00020000>;
|
||||
};
|
||||
|
||||
soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
reg = <0 0xffe09000 0 0x1000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "p1020rdb-pc.dtsi"
|
||||
/include/ "fsl/p1020si-post.dtsi"
|
||||
90
arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
Normal file
90
arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
Normal file
@ -0,0 +1,90 @@
|
||||
/*
|
||||
* P1020 RDB-PC Device Tree Source (36-bit address map)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "fsl/p1020si-pre.dtsi"
|
||||
/ {
|
||||
model = "fsl,P1020RDB-PC";
|
||||
compatible = "fsl,P1020RDB-PC";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
lbc: localbus@fffe05000 {
|
||||
reg = <0xf 0xffe05000 0 0x1000>;
|
||||
|
||||
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
|
||||
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
|
||||
0x1 0x0 0xf 0xff800000 0x00040000
|
||||
0x2 0x0 0xf 0xffb00000 0x00040000
|
||||
0x3 0x0 0xf 0xffa00000 0x00020000>;
|
||||
};
|
||||
|
||||
soc: soc@fffe00000 {
|
||||
ranges = <0x0 0xf 0xffe00000 0x100000>;
|
||||
};
|
||||
|
||||
pci0: pcie@fffe09000 {
|
||||
reg = <0xf 0xffe09000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xc0000000
|
||||
0x2000000 0x0 0xc0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@fffe0a000 {
|
||||
reg = <0xf 0xffe0a000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "p1020rdb-pc.dtsi"
|
||||
/include/ "fsl/p1020si-post.dtsi"
|
||||
64
arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts
Normal file
64
arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts
Normal file
@ -0,0 +1,64 @@
|
||||
/*
|
||||
* P1020 RDB-PC Core0 Device Tree Source in CAMP mode.
|
||||
*
|
||||
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
|
||||
* can be shared, all the other devices must be assigned to one core only.
|
||||
* This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
|
||||
* eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
|
||||
*
|
||||
* Please note to add "-b 0" for core0's dts compiling.
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p1020rdb-pc_32b.dts"
|
||||
|
||||
/ {
|
||||
model = "fsl,P1020RDB-PC";
|
||||
compatible = "fsl,P1020RDB-PC";
|
||||
|
||||
aliases {
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
serial0 = &serial0;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
PowerPC,P1020@1 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
serial1: serial@4600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet0: ethernet@b0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
protected-sources = <
|
||||
42 29 30 34 /* serial1, enet0-queue-group0 */
|
||||
17 18 24 45 /* enet0-queue-group1, crypto */
|
||||
>;
|
||||
pic-no-reset;
|
||||
};
|
||||
};
|
||||
};
|
||||
142
arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts
Normal file
142
arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts
Normal file
@ -0,0 +1,142 @@
|
||||
/*
|
||||
* P1020 RDB-PC Core1 Device Tree Source in CAMP mode.
|
||||
*
|
||||
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
|
||||
* can be shared, all the other devices must be assigned to one core only.
|
||||
* This dts allows core1 to have l2, eth0, crypto.
|
||||
*
|
||||
* Please note to add "-b 1" for core1's dts compiling.
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p1020rdb-pc_32b.dts"
|
||||
|
||||
/ {
|
||||
model = "fsl,P1020RDB-PC";
|
||||
compatible = "fsl,P1020RDB-PC";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
serial0 = &serial1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
PowerPC,P1020@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
ecm-law@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio: gpio-controller@f000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio@25000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet1: ethernet@b1000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet2: ethernet@b2000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
protected-sources = <
|
||||
16 /* ecm, mem, L2, pci0, pci1 */
|
||||
43 42 59 /* i2c, serial0, spi */
|
||||
47 63 62 /* gpio, tdm */
|
||||
20 21 22 23 /* dma */
|
||||
03 02 /* mdio */
|
||||
35 36 40 /* enet1-queue-group0 */
|
||||
51 52 67 /* enet1-queue-group1 */
|
||||
31 32 33 /* enet2-queue-group0 */
|
||||
25 26 27 /* enet2-queue-group1 */
|
||||
28 72 58 /* usb, sdhci, crypto */
|
||||
0xb0 0xb1 0xb2 /* message */
|
||||
0xb3 0xb4 0xb5
|
||||
0xb6 0xb7
|
||||
0xe0 0xe1 0xe2 /* msi */
|
||||
0xe3 0xe4 0xe5
|
||||
0xe6 0xe7 /* sdhci, crypto , pci */
|
||||
>;
|
||||
pic-no-reset;
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user