i2c: Add DaVinci I2C controller support
Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Acked-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
parent
7589a326d1
commit
95a7f10ead
@ -106,6 +106,19 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
|
||||
help
|
||||
The unit of the TWI clock is kHz.
|
||||
|
||||
config I2C_DAVINCI
|
||||
tristate "DaVinci I2C driver"
|
||||
depends on ARCH_DAVINCI
|
||||
help
|
||||
Support for TI DaVinci I2C controller driver.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-davinci.
|
||||
|
||||
Please note that this driver might be needed to bring up other
|
||||
devices such as DaVinci NIC.
|
||||
For details please see http://www.ti.com/davinci
|
||||
|
||||
config I2C_ELEKTOR
|
||||
tristate "Elektor ISA card"
|
||||
depends on ISA && BROKEN_ON_SMP
|
||||
|
@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
|
||||
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
|
||||
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
|
||||
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
|
||||
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
|
||||
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
|
||||
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
|
||||
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
|
||||
|
586
drivers/i2c/busses/i2c-davinci.c
Normal file
586
drivers/i2c/busses/i2c-davinci.c
Normal file
@ -0,0 +1,586 @@
|
||||
/*
|
||||
* TI DAVINCI I2C adapter driver.
|
||||
*
|
||||
* Copyright (C) 2006 Texas Instruments.
|
||||
* Copyright (C) 2007 MontaVista Software Inc.
|
||||
*
|
||||
* Updated by Vinod & Sudhakar Feb 2005
|
||||
*
|
||||
* ----------------------------------------------------------------------------
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
* ----------------------------------------------------------------------------
|
||||
*
|
||||
*/
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <asm/arch/i2c.h>
|
||||
|
||||
/* ----- global defines ----------------------------------------------- */
|
||||
|
||||
#define DAVINCI_I2C_TIMEOUT (1*HZ)
|
||||
#define I2C_DAVINCI_INTR_ALL (DAVINCI_I2C_IMR_AAS | \
|
||||
DAVINCI_I2C_IMR_SCD | \
|
||||
DAVINCI_I2C_IMR_ARDY | \
|
||||
DAVINCI_I2C_IMR_NACK | \
|
||||
DAVINCI_I2C_IMR_AL)
|
||||
|
||||
#define DAVINCI_I2C_OAR_REG 0x00
|
||||
#define DAVINCI_I2C_IMR_REG 0x04
|
||||
#define DAVINCI_I2C_STR_REG 0x08
|
||||
#define DAVINCI_I2C_CLKL_REG 0x0c
|
||||
#define DAVINCI_I2C_CLKH_REG 0x10
|
||||
#define DAVINCI_I2C_CNT_REG 0x14
|
||||
#define DAVINCI_I2C_DRR_REG 0x18
|
||||
#define DAVINCI_I2C_SAR_REG 0x1c
|
||||
#define DAVINCI_I2C_DXR_REG 0x20
|
||||
#define DAVINCI_I2C_MDR_REG 0x24
|
||||
#define DAVINCI_I2C_IVR_REG 0x28
|
||||
#define DAVINCI_I2C_EMDR_REG 0x2c
|
||||
#define DAVINCI_I2C_PSC_REG 0x30
|
||||
|
||||
#define DAVINCI_I2C_IVR_AAS 0x07
|
||||
#define DAVINCI_I2C_IVR_SCD 0x06
|
||||
#define DAVINCI_I2C_IVR_XRDY 0x05
|
||||
#define DAVINCI_I2C_IVR_RDR 0x04
|
||||
#define DAVINCI_I2C_IVR_ARDY 0x03
|
||||
#define DAVINCI_I2C_IVR_NACK 0x02
|
||||
#define DAVINCI_I2C_IVR_AL 0x01
|
||||
|
||||
#define DAVINCI_I2C_STR_BB (1 << 12)
|
||||
#define DAVINCI_I2C_STR_RSFULL (1 << 11)
|
||||
#define DAVINCI_I2C_STR_SCD (1 << 5)
|
||||
#define DAVINCI_I2C_STR_ARDY (1 << 2)
|
||||
#define DAVINCI_I2C_STR_NACK (1 << 1)
|
||||
#define DAVINCI_I2C_STR_AL (1 << 0)
|
||||
|
||||
#define DAVINCI_I2C_MDR_NACK (1 << 15)
|
||||
#define DAVINCI_I2C_MDR_STT (1 << 13)
|
||||
#define DAVINCI_I2C_MDR_STP (1 << 11)
|
||||
#define DAVINCI_I2C_MDR_MST (1 << 10)
|
||||
#define DAVINCI_I2C_MDR_TRX (1 << 9)
|
||||
#define DAVINCI_I2C_MDR_XA (1 << 8)
|
||||
#define DAVINCI_I2C_MDR_IRS (1 << 5)
|
||||
|
||||
#define DAVINCI_I2C_IMR_AAS (1 << 6)
|
||||
#define DAVINCI_I2C_IMR_SCD (1 << 5)
|
||||
#define DAVINCI_I2C_IMR_XRDY (1 << 4)
|
||||
#define DAVINCI_I2C_IMR_RRDY (1 << 3)
|
||||
#define DAVINCI_I2C_IMR_ARDY (1 << 2)
|
||||
#define DAVINCI_I2C_IMR_NACK (1 << 1)
|
||||
#define DAVINCI_I2C_IMR_AL (1 << 0)
|
||||
|
||||
#define MOD_REG_BIT(val, mask, set) do { \
|
||||
if (set) { \
|
||||
val |= mask; \
|
||||
} else { \
|
||||
val &= ~mask; \
|
||||
} \
|
||||
} while (0)
|
||||
|
||||
struct davinci_i2c_dev {
|
||||
struct device *dev;
|
||||
void __iomem *base;
|
||||
struct completion cmd_complete;
|
||||
struct clk *clk;
|
||||
int cmd_err;
|
||||
u8 *buf;
|
||||
size_t buf_len;
|
||||
int irq;
|
||||
struct i2c_adapter adapter;
|
||||
};
|
||||
|
||||
/* default platform data to use if not supplied in the platform_device */
|
||||
static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = {
|
||||
.bus_freq = 100,
|
||||
.bus_delay = 0,
|
||||
};
|
||||
|
||||
static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
|
||||
int reg, u16 val)
|
||||
{
|
||||
__raw_writew(val, i2c_dev->base + reg);
|
||||
}
|
||||
|
||||
static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
|
||||
{
|
||||
return __raw_readw(i2c_dev->base + reg);
|
||||
}
|
||||
|
||||
/*
|
||||
* This functions configures I2C and brings I2C out of reset.
|
||||
* This function is called during I2C init function. This function
|
||||
* also gets called if I2C encounters any errors.
|
||||
*/
|
||||
static int i2c_davinci_init(struct davinci_i2c_dev *dev)
|
||||
{
|
||||
struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
|
||||
u16 psc;
|
||||
u32 clk;
|
||||
u32 clkh;
|
||||
u32 clkl;
|
||||
u32 input_clock = clk_get_rate(dev->clk);
|
||||
u16 w;
|
||||
|
||||
if (!pdata)
|
||||
pdata = &davinci_i2c_platform_data_default;
|
||||
|
||||
/* put I2C into reset */
|
||||
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
|
||||
MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 0);
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
|
||||
|
||||
/* NOTE: I2C Clock divider programming info
|
||||
* As per I2C specs the following formulas provide prescaler
|
||||
* and low/high divider values
|
||||
* input clk --> PSC Div -----------> ICCL/H Div --> output clock
|
||||
* module clk
|
||||
*
|
||||
* output clk = module clk / (PSC + 1) [ (ICCL + d) + (ICCH + d) ]
|
||||
*
|
||||
* Thus,
|
||||
* (ICCL + ICCH) = clk = (input clk / ((psc +1) * output clk)) - 2d;
|
||||
*
|
||||
* where if PSC == 0, d = 7,
|
||||
* if PSC == 1, d = 6
|
||||
* if PSC > 1 , d = 5
|
||||
*/
|
||||
|
||||
psc = 26; /* To get 1MHz clock */
|
||||
|
||||
clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)) - 10;
|
||||
clkh = (50 * clk) / 100;
|
||||
clkl = clk - clkh;
|
||||
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc);
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
|
||||
|
||||
dev_dbg(dev->dev, "CLK = %d\n", clk);
|
||||
dev_dbg(dev->dev, "PSC = %d\n",
|
||||
davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
|
||||
dev_dbg(dev->dev, "CLKL = %d\n",
|
||||
davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
|
||||
dev_dbg(dev->dev, "CLKH = %d\n",
|
||||
davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
|
||||
|
||||
/* Take the I2C module out of reset: */
|
||||
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
|
||||
MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 1);
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
|
||||
|
||||
/* Enable interrupts */
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Waiting for bus not busy
|
||||
*/
|
||||
static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
|
||||
char allow_sleep)
|
||||
{
|
||||
unsigned long timeout;
|
||||
|
||||
timeout = jiffies + DAVINCI_I2C_TIMEOUT;
|
||||
while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG)
|
||||
& DAVINCI_I2C_STR_BB) {
|
||||
if (time_after(jiffies, timeout)) {
|
||||
dev_warn(dev->dev,
|
||||
"timeout waiting for bus ready\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
if (allow_sleep)
|
||||
schedule_timeout(1);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Low level master read/write transaction. This function is called
|
||||
* from i2c_davinci_xfer.
|
||||
*/
|
||||
static int
|
||||
i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
|
||||
{
|
||||
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
|
||||
struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
|
||||
u32 flag;
|
||||
u32 stat;
|
||||
u16 w;
|
||||
int r;
|
||||
|
||||
if (msg->len == 0)
|
||||
return -EINVAL;
|
||||
|
||||
if (!pdata)
|
||||
pdata = &davinci_i2c_platform_data_default;
|
||||
/* Introduce a delay, required for some boards (e.g Davinci EVM) */
|
||||
if (pdata->bus_delay)
|
||||
udelay(pdata->bus_delay);
|
||||
|
||||
/* set the slave address */
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr);
|
||||
|
||||
dev->buf = msg->buf;
|
||||
dev->buf_len = msg->len;
|
||||
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
|
||||
|
||||
init_completion(&dev->cmd_complete);
|
||||
dev->cmd_err = 0;
|
||||
|
||||
/* Clear any pending interrupts by reading the IVR */
|
||||
stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG);
|
||||
|
||||
/* Take I2C out of reset, configure it as master and set the
|
||||
* start bit */
|
||||
flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST | DAVINCI_I2C_MDR_STT;
|
||||
|
||||
/* if the slave address is ten bit address, enable XA bit */
|
||||
if (msg->flags & I2C_M_TEN)
|
||||
flag |= DAVINCI_I2C_MDR_XA;
|
||||
if (!(msg->flags & I2C_M_RD))
|
||||
flag |= DAVINCI_I2C_MDR_TRX;
|
||||
if (stop)
|
||||
flag |= DAVINCI_I2C_MDR_STP;
|
||||
|
||||
/* Enable receive or transmit interrupts */
|
||||
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
|
||||
if (msg->flags & I2C_M_RD)
|
||||
MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 1);
|
||||
else
|
||||
MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 1);
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
|
||||
|
||||
/* write the data into mode register */
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
|
||||
|
||||
r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
|
||||
DAVINCI_I2C_TIMEOUT);
|
||||
dev->buf_len = 0;
|
||||
if (r < 0)
|
||||
return r;
|
||||
|
||||
if (r == 0) {
|
||||
dev_err(dev->dev, "controller timed out\n");
|
||||
i2c_davinci_init(dev);
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
/* no error */
|
||||
if (likely(!dev->cmd_err))
|
||||
return msg->len;
|
||||
|
||||
/* We have an error */
|
||||
if (dev->cmd_err & DAVINCI_I2C_STR_AL) {
|
||||
i2c_davinci_init(dev);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
if (dev->cmd_err & DAVINCI_I2C_STR_NACK) {
|
||||
if (msg->flags & I2C_M_IGNORE_NAK)
|
||||
return msg->len;
|
||||
if (stop) {
|
||||
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
|
||||
MOD_REG_BIT(w, DAVINCI_I2C_MDR_STP, 1);
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
|
||||
}
|
||||
return -EREMOTEIO;
|
||||
}
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/*
|
||||
* Prepare controller for a transaction and call i2c_davinci_xfer_msg
|
||||
*/
|
||||
static int
|
||||
i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
|
||||
{
|
||||
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
|
||||
int i;
|
||||
int ret;
|
||||
|
||||
dev_dbg(dev->dev, "%s: msgs: %d\n", __FUNCTION__, num);
|
||||
|
||||
ret = i2c_davinci_wait_bus_not_busy(dev, 1);
|
||||
if (ret < 0) {
|
||||
dev_warn(dev->dev, "timeout waiting for bus ready\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
for (i = 0; i < num; i++) {
|
||||
ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1)));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
dev_dbg(dev->dev, "%s:%d ret: %d\n", __FUNCTION__, __LINE__, ret);
|
||||
|
||||
return num;
|
||||
}
|
||||
|
||||
static u32 i2c_davinci_func(struct i2c_adapter *adap)
|
||||
{
|
||||
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
|
||||
}
|
||||
|
||||
/*
|
||||
* Interrupt service routine. This gets called whenever an I2C interrupt
|
||||
* occurs.
|
||||
*/
|
||||
static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
|
||||
{
|
||||
struct davinci_i2c_dev *dev = dev_id;
|
||||
u32 stat;
|
||||
int count = 0;
|
||||
u16 w;
|
||||
|
||||
while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) {
|
||||
dev_dbg(dev->dev, "%s: stat=0x%x\n", __FUNCTION__, stat);
|
||||
if (count++ == 100) {
|
||||
dev_warn(dev->dev, "Too much work in one IRQ\n");
|
||||
break;
|
||||
}
|
||||
|
||||
switch (stat) {
|
||||
case DAVINCI_I2C_IVR_AL:
|
||||
dev->cmd_err |= DAVINCI_I2C_STR_AL;
|
||||
complete(&dev->cmd_complete);
|
||||
break;
|
||||
|
||||
case DAVINCI_I2C_IVR_NACK:
|
||||
dev->cmd_err |= DAVINCI_I2C_STR_NACK;
|
||||
complete(&dev->cmd_complete);
|
||||
break;
|
||||
|
||||
case DAVINCI_I2C_IVR_ARDY:
|
||||
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
|
||||
MOD_REG_BIT(w, DAVINCI_I2C_STR_ARDY, 1);
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
|
||||
complete(&dev->cmd_complete);
|
||||
break;
|
||||
|
||||
case DAVINCI_I2C_IVR_RDR:
|
||||
if (dev->buf_len) {
|
||||
*dev->buf++ =
|
||||
davinci_i2c_read_reg(dev,
|
||||
DAVINCI_I2C_DRR_REG);
|
||||
dev->buf_len--;
|
||||
if (dev->buf_len)
|
||||
continue;
|
||||
|
||||
w = davinci_i2c_read_reg(dev,
|
||||
DAVINCI_I2C_STR_REG);
|
||||
MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 0);
|
||||
davinci_i2c_write_reg(dev,
|
||||
DAVINCI_I2C_STR_REG,
|
||||
w);
|
||||
} else
|
||||
dev_err(dev->dev, "RDR IRQ while no"
|
||||
"data requested\n");
|
||||
break;
|
||||
|
||||
case DAVINCI_I2C_IVR_XRDY:
|
||||
if (dev->buf_len) {
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG,
|
||||
*dev->buf++);
|
||||
dev->buf_len--;
|
||||
if (dev->buf_len)
|
||||
continue;
|
||||
|
||||
w = davinci_i2c_read_reg(dev,
|
||||
DAVINCI_I2C_IMR_REG);
|
||||
MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 0);
|
||||
davinci_i2c_write_reg(dev,
|
||||
DAVINCI_I2C_IMR_REG,
|
||||
w);
|
||||
} else
|
||||
dev_err(dev->dev, "TDR IRQ while no data to"
|
||||
"send\n");
|
||||
break;
|
||||
|
||||
case DAVINCI_I2C_IVR_SCD:
|
||||
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
|
||||
MOD_REG_BIT(w, DAVINCI_I2C_STR_SCD, 1);
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
|
||||
complete(&dev->cmd_complete);
|
||||
break;
|
||||
|
||||
case DAVINCI_I2C_IVR_AAS:
|
||||
dev_warn(dev->dev, "Address as slave interrupt\n");
|
||||
}/* switch */
|
||||
}/* while */
|
||||
|
||||
return count ? IRQ_HANDLED : IRQ_NONE;
|
||||
}
|
||||
|
||||
static struct i2c_algorithm i2c_davinci_algo = {
|
||||
.master_xfer = i2c_davinci_xfer,
|
||||
.functionality = i2c_davinci_func,
|
||||
};
|
||||
|
||||
static int davinci_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct davinci_i2c_dev *dev;
|
||||
struct i2c_adapter *adap;
|
||||
struct resource *mem, *irq, *ioarea;
|
||||
int r;
|
||||
|
||||
/* NOTE: driver uses the static register mapping */
|
||||
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!mem) {
|
||||
dev_err(&pdev->dev, "no mem resource?\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
||||
if (!irq) {
|
||||
dev_err(&pdev->dev, "no irq resource?\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
|
||||
pdev->name);
|
||||
if (!ioarea) {
|
||||
dev_err(&pdev->dev, "I2C region already claimed\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
dev = kzalloc(sizeof(struct davinci_i2c_dev), GFP_KERNEL);
|
||||
if (!dev) {
|
||||
r = -ENOMEM;
|
||||
goto err_release_region;
|
||||
}
|
||||
|
||||
dev->dev = get_device(&pdev->dev);
|
||||
dev->irq = irq->start;
|
||||
platform_set_drvdata(pdev, dev);
|
||||
|
||||
dev->clk = clk_get(&pdev->dev, "I2CCLK");
|
||||
if (IS_ERR(dev->clk)) {
|
||||
r = -ENODEV;
|
||||
goto err_free_mem;
|
||||
}
|
||||
clk_enable(dev->clk);
|
||||
|
||||
dev->base = (void __iomem *)IO_ADDRESS(mem->start);
|
||||
i2c_davinci_init(dev);
|
||||
|
||||
r = request_irq(dev->irq, i2c_davinci_isr, 0, pdev->name, dev);
|
||||
if (r) {
|
||||
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
|
||||
goto err_unuse_clocks;
|
||||
}
|
||||
|
||||
adap = &dev->adapter;
|
||||
i2c_set_adapdata(adap, dev);
|
||||
adap->owner = THIS_MODULE;
|
||||
adap->class = I2C_CLASS_HWMON;
|
||||
strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
|
||||
adap->algo = &i2c_davinci_algo;
|
||||
adap->dev.parent = &pdev->dev;
|
||||
|
||||
/* FIXME */
|
||||
adap->timeout = 1;
|
||||
adap->retries = 1;
|
||||
|
||||
adap->nr = pdev->id;
|
||||
r = i2c_add_numbered_adapter(adap);
|
||||
if (r) {
|
||||
dev_err(&pdev->dev, "failure adding adapter\n");
|
||||
goto err_free_irq;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_free_irq:
|
||||
free_irq(dev->irq, dev);
|
||||
err_unuse_clocks:
|
||||
clk_disable(dev->clk);
|
||||
clk_put(dev->clk);
|
||||
dev->clk = NULL;
|
||||
err_free_mem:
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
put_device(&pdev->dev);
|
||||
kfree(dev);
|
||||
err_release_region:
|
||||
release_mem_region(mem->start, (mem->end - mem->start) + 1);
|
||||
|
||||
return r;
|
||||
}
|
||||
|
||||
static int davinci_i2c_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
|
||||
struct resource *mem;
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
i2c_del_adapter(&dev->adapter);
|
||||
put_device(&pdev->dev);
|
||||
|
||||
clk_disable(dev->clk);
|
||||
clk_put(dev->clk);
|
||||
dev->clk = NULL;
|
||||
|
||||
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
|
||||
free_irq(IRQ_I2C, dev);
|
||||
kfree(dev);
|
||||
|
||||
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
release_mem_region(mem->start, (mem->end - mem->start) + 1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver davinci_i2c_driver = {
|
||||
.probe = davinci_i2c_probe,
|
||||
.remove = davinci_i2c_remove,
|
||||
.driver = {
|
||||
.name = "i2c_davinci",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
/* I2C may be needed to bring up other drivers */
|
||||
static int __init davinci_i2c_init_driver(void)
|
||||
{
|
||||
return platform_driver_register(&davinci_i2c_driver);
|
||||
}
|
||||
subsys_initcall(davinci_i2c_init_driver);
|
||||
|
||||
static void __exit davinci_i2c_exit_driver(void)
|
||||
{
|
||||
platform_driver_unregister(&davinci_i2c_driver);
|
||||
}
|
||||
module_exit(davinci_i2c_exit_driver);
|
||||
|
||||
MODULE_AUTHOR("Texas Instruments India");
|
||||
MODULE_DESCRIPTION("TI DaVinci I2C bus adapter");
|
||||
MODULE_LICENSE("GPL");
|
21
include/asm-arm/arch-davinci/i2c.h
Normal file
21
include/asm-arm/arch-davinci/i2c.h
Normal file
@ -0,0 +1,21 @@
|
||||
/*
|
||||
* DaVinci I2C controller platfrom_device info
|
||||
*
|
||||
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* 2007 (c) MontaVista Software, Inc. This file is licensed under
|
||||
* the terms of the GNU General Public License version 2. This program
|
||||
* is licensed "as is" without any warranty of any kind, whether express
|
||||
* or implied.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_I2C_H
|
||||
#define __ASM_ARCH_I2C_H
|
||||
|
||||
/* All frequencies are expressed in kHz */
|
||||
struct davinci_i2c_platform_data {
|
||||
unsigned int bus_freq; /* standard bus frequency */
|
||||
unsigned int bus_delay; /* transaction delay */
|
||||
};
|
||||
|
||||
#endif /* __ASM_ARCH_I2C_H */
|
Loading…
Reference in New Issue
Block a user