From 08f9572671c8047e7234cbf150869aa3c3d59a97 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 5 Jan 2017 14:25:59 +0100 Subject: [PATCH 1/3] HID: ignore Petzl USB headlamp This headlamp contains a dummy HID descriptor which pretends to be a mouse-like device, but can't be used as a mouse at all. Reported-by: Lukas Ocilka Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index cff060b56da9..ea36b557d5ee 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2496,6 +2496,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) }, + { HID_USB_DEVICE(USB_VENDOR_ID_PETZL, USB_DEVICE_ID_PETZL_HEADLAMP) }, { HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) }, { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) }, #if IS_ENABLED(CONFIG_MOUSE_SYNAPTICS_USB) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 54bd22dc1411..f46f2c5117fa 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -816,6 +816,9 @@ #define USB_VENDOR_ID_PETALYNX 0x18b1 #define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037 +#define USB_VENDOR_ID_PETZL 0x2122 +#define USB_DEVICE_ID_PETZL_HEADLAMP 0x1234 + #define USB_VENDOR_ID_PHILIPS 0x0471 #define USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE 0x0617 From 1ebb71143758f45dc0fa76e2f48429e13b16d110 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 6 Jan 2017 15:33:36 +0100 Subject: [PATCH 2/3] HID: hid-cypress: validate length of report Make sure we have enough of a report structure to validate before looking at it. Reported-by: Benoit Camredon Tested-by: Benoit Camredon Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jiri Kosina --- drivers/hid/hid-cypress.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/hid-cypress.c b/drivers/hid/hid-cypress.c index 1b764d1745f3..1689568b597d 100644 --- a/drivers/hid/hid-cypress.c +++ b/drivers/hid/hid-cypress.c @@ -39,6 +39,9 @@ static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc, if (!(quirks & CP_RDESC_SWAPPED_MIN_MAX)) return rdesc; + if (*rsize < 4) + return rdesc; + for (i = 0; i < *rsize - 4; i++) if (rdesc[i] == 0x29 && rdesc[i + 2] == 0x19) { rdesc[i] = 0x19; From a89af4abdf9b353cdd6f61afc0eaaac403304873 Mon Sep 17 00:00:00 2001 From: Brendan McGrath Date: Sat, 7 Jan 2017 08:01:38 +1100 Subject: [PATCH 3/3] HID: i2c-hid: Add sleep between POWER ON and RESET Support for the Asus Touchpad was recently added. It turns out this device can fail initialisation (and become unusable) when the RESET command is sent too soon after the POWER ON command. Unfortunately the i2c-hid specification does not specify the need for a delay between these two commands. But it was discovered the Windows driver has a 1ms delay. As a result, this patch modifies the i2c-hid module to add a sleep inbetween the POWER ON and RESET commands which lasts between 1ms and 5ms. See https://github.com/vlasenko/hid-asus-dkms/issues/24 for further details. Signed-off-by: Brendan McGrath Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index 78fb32a7b103..ea3c3546cef7 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -426,6 +426,15 @@ static int i2c_hid_hwreset(struct i2c_client *client) if (ret) goto out_unlock; + /* + * The HID over I2C specification states that if a DEVICE needs time + * after the PWR_ON request, it should utilise CLOCK stretching. + * However, it has been observered that the Windows driver provides a + * 1ms sleep between the PWR_ON and RESET requests and that some devices + * rely on this. + */ + usleep_range(1000, 5000); + i2c_hid_dbg(ihid, "resetting...\n"); ret = i2c_hid_command(client, &hid_reset_cmd, NULL, 0);