iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

watchdog: w83627hf: Auto-detect IO address and supported chips

Browse Source 
Instead of requiring the user to provide an IO address per module
parameter, auto-detect it as well as supported chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
Guenter Roeck 2013-08-17 13:58:43 -07:00 committed by Wim Van Sebroeck
parent f72fa00f8a
commit 962c04f54e
2 changed files with 173 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
drivers/watchdog/Kconfig
View File

@ -892,13 +892,20 @@ config VIA_WDT
Most people will say N.
config W83627HF_WDT
tristate "W83627HF/W83627DHG Watchdog Timer"
tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
depends on X86
select WATCHDOG_CORE
---help---
This is the driver for the hardware watchdog on the W83627HF chipset
as used in Advantech PC-9578 and Tyan S2721-533 motherboards
(and likely others). The driver also supports the W83627DHG chip.
This is the driver for the hardware watchdog on the following
Super I/O chips.
W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
W83637HF
W83667HG/HG-B
W83687THF
NCT6775
NCT6776
NCT6779
This watchdog simply watches your kernel to make sure it doesn't
freeze, and if it does, it reboots your computer after a certain
amount of time.

182
drivers/watchdog/w83627hf_wdt.c
View File

@ -44,10 +44,11 @@
#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2E;
module_param(wdt_io, int, 0);
MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
static int wdt_io;
enum chips { w83627hf, w83627s, w83637hf, w83627thf, w83687thf,
w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p, w83667hg_b,
nct6775, nct6776, nct6779 };
static int timeout; /* in seconds */
module_param(timeout, int, 0);
@ -72,6 +73,21 @@ MODULE_PARM_DESC(nowayout,
#define W83627HF_LD_WDT 0x08
#define W83627HF_ID 0x52
#define W83627S_ID 0x59
#define W83637HF_ID 0x70
#define W83627THF_ID 0x82
#define W83687THF_ID 0x85
#define W83627EHF_ID 0x88
#define W83627DHG_ID 0xa0
#define W83627UHG_ID 0xa2
#define W83667HG_ID 0xa5
#define W83627DHG_P_ID 0xb0
#define W83667HG_B_ID 0xb3
#define NCT6775_ID 0xb4
#define NCT6776_ID 0xc3
#define NCT6779_ID 0xc5
static void superio_outb(int reg, int val)
{
outb(reg, WDT_EFER);
@ -106,10 +122,7 @@ static void superio_exit(void)
release_region(wdt_io, 2);
}
/* tyan motherboards seem to set F5 to 0x4C ?
* So explicitly init to appropriate value. */
static int w83627hf_init(struct watchdog_device *wdog)
static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
{
int ret;
unsigned char t;
@ -119,20 +132,59 @@ static int w83627hf_init(struct watchdog_device *wdog)
return ret;
superio_select(W83627HF_LD_WDT);
t = superio_inb(0x20); /* check chip version */
if (t == 0x82) { /* W83627THF */
t = (superio_inb(0x2b) & 0xf7);
superio_outb(0x2b, t | 0x04); /* set GPIO3 to WDT0 */
} else if (t == 0x88 || t == 0xa0) { /* W83627EHF / W83627DHG */
t = superio_inb(0x2d);
superio_outb(0x2d, t & ~0x01); /* set GPIO5 to WDT0 */
}
/* set CR30 bit 0 to activate GPIO2 */
t = superio_inb(0x30);
if (!(t & 0x01))
superio_outb(0x30, t | 0x01);
switch (chip) {
case w83627hf:
case w83627s:
t = superio_inb(0x2B) & ~0x10;
superio_outb(0x2B, t); /* set GPIO24 to WDT0 */
break;
case w83627thf:
t = (superio_inb(0x2B) & ~0x08) | 0x04;
superio_outb(0x2B, t); /* set GPIO3 to WDT0 */
break;
case w83627dhg:
case w83627dhg_p:
t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */
superio_outb(0x2D, t); /* set GPIO5 to WDT0 */
t = superio_inb(0xF5);
t |= 0x02; /* enable the WDTO# output low pulse
* to the KBRST# pin */
superio_outb(0xF5, t);
break;
case w83637hf:
break;
case w83687thf:
t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */
superio_outb(0x2C, t);
break;
case w83627ehf:
case w83627uhg:
case w83667hg:
case w83667hg_b:
case nct6775:
case nct6776:
case nct6779:
/*
* These chips have a fixed WDTO# output pin (W83627UHG),
* or support more than one WDTO# output pin.
* Don't touch its configuration, and hope the BIOS
* does the right thing.
*/
t = superio_inb(0xF5);
t |= 0x02; /* enable the WDTO# output low pulse
* to the KBRST# pin */
superio_outb(0xF5, t);
break;
default:
break;
}
t = superio_inb(0xF6);
if (t != 0) {
pr_info("Watchdog already running. Resetting timeout to %d sec\n",
@ -142,8 +194,6 @@ static int w83627hf_init(struct watchdog_device *wdog)
/* set second mode & disable keyboard turning off watchdog */
t = superio_inb(0xF5) & ~0x0C;
/* enable the WDTO# output low pulse to the KBRST# pin */
t |= 0x02;
superio_outb(0xF5, t);
/* disable keyboard & mouse turning off watchdog */
@ -249,16 +299,108 @@ static struct notifier_block wdt_notifier = {
.notifier_call = wdt_notify_sys,
};
static int wdt_find(int addr)
{
u8 val;
int ret;
ret = superio_enter();
if (ret)
return ret;
superio_select(W83627HF_LD_WDT);
val = superio_inb(0x20);
switch (val) {
case W83627HF_ID:
ret = w83627hf;
break;
case W83627S_ID:
ret = w83627s;
break;
case W83637HF_ID:
ret = w83637hf;
break;
case W83627THF_ID:
ret = w83627thf;
break;
case W83687THF_ID:
ret = w83687thf;
break;
case W83627EHF_ID:
ret = w83627ehf;
break;
case W83627DHG_ID:
ret = w83627dhg;
break;
case W83627DHG_P_ID:
ret = w83627dhg_p;
break;
case W83627UHG_ID:
ret = w83627uhg;
break;
case W83667HG_ID:
ret = w83667hg;
break;
case W83667HG_B_ID:
ret = w83667hg_b;
break;
case NCT6775_ID:
ret = nct6775;
break;
case NCT6776_ID:
ret = nct6776;
break;
case NCT6779_ID:
ret = nct6779;
break;
case 0xff:
ret = -ENODEV;
break;
default:
ret = -ENODEV;
pr_err("Unsupported chip ID: 0x%02x\n", val);
break;
}
superio_exit();
return ret;
}
static int __init wdt_init(void)
{
int ret;
int chip;
const char * const chip_name[] = {
"W83627HF",
"W83627S",
"W83637HF",
"W83627THF",
"W83687THF",
"W83627EHF",
"W83627DHG",
"W83627UHG",
"W83667HG",
"W83667DHG-P",
"W83667HG-B",
"NCT6775",
"NCT6776",
"NCT6779",
};
pr_info("WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising\n");
wdt_io = 0x2e;
chip = wdt_find(0x2e);
if (chip < 0) {
wdt_io = 0x4e;
chip = wdt_find(0x4e);
if (chip < 0)
return chip;
}
pr_info("WDT driver for %s Super I/O chip initialising\n",
chip_name[chip]);
watchdog_init_timeout(&wdt_dev, timeout, NULL);
watchdog_set_nowayout(&wdt_dev, nowayout);
ret = w83627hf_init(&wdt_dev);
ret = w83627hf_init(&wdt_dev, chip);
if (ret) {
pr_err("failed to initialize watchdog (err=%d)\n", ret);
return ret;