smsc95xx: Ignore -ENODEV errors when device is unplugged
commit c70c453abcbf3ecbaadd4c3236a5119b8da365cf upstream. According to Documentation/driver-api/usb/URB.rst when a device is unplugged usb_submit_urb() returns -ENODEV. This error code propagates all the way up to usbnet_read_cmd() and usbnet_write_cmd() calls inside the smsc95xx.c driver during Ethernet cable unplug, unbind or reboot. This causes the following errors to be shown on reboot, for example: ci_hdrc ci_hdrc.1: remove, state 1 usb usb2: USB disconnect, device number 1 usb 2-1: USB disconnect, device number 2 usb 2-1.1: USB disconnect, device number 3 smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup usb 2-1.4: USB disconnect, device number 4 ci_hdrc ci_hdrc.1: USB bus 2 deregistered ci_hdrc ci_hdrc.0: remove, state 4 usb usb1: USB disconnect, device number 1 ci_hdrc ci_hdrc.0: USB bus 1 deregistered imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot! reboot: Restarting system Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and __smsc95xx_phy_wait_not_busy() and do not print error messages when -ENODEV is returned. Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
e27b51af54
commit
96340cdd55
@ -84,9 +84,10 @@ static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
|
||||
ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
|
||||
| USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
||||
0, index, &buf, 4);
|
||||
if (unlikely(ret < 0)) {
|
||||
netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
|
||||
index, ret);
|
||||
if (ret < 0) {
|
||||
if (ret != -ENODEV)
|
||||
netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
|
||||
index, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -116,7 +117,7 @@ static int __must_check __smsc95xx_write_reg(struct usbnet *dev, u32 index,
|
||||
ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
|
||||
| USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
||||
0, index, &buf, 4);
|
||||
if (unlikely(ret < 0))
|
||||
if (ret < 0 && ret != -ENODEV)
|
||||
netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
|
||||
index, ret);
|
||||
|
||||
@ -159,6 +160,9 @@ static int __must_check __smsc95xx_phy_wait_not_busy(struct usbnet *dev,
|
||||
do {
|
||||
ret = __smsc95xx_read_reg(dev, MII_ADDR, &val, in_pm);
|
||||
if (ret < 0) {
|
||||
/* Ignore -ENODEV error during disconnect() */
|
||||
if (ret == -ENODEV)
|
||||
return 0;
|
||||
netdev_warn(dev->net, "Error reading MII_ACCESS\n");
|
||||
return ret;
|
||||
}
|
||||
@ -194,7 +198,8 @@ static int __smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx,
|
||||
addr = mii_address_cmd(phy_id, idx, MII_READ_ | MII_BUSY_);
|
||||
ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
|
||||
if (ret < 0) {
|
||||
netdev_warn(dev->net, "Error writing MII_ADDR\n");
|
||||
if (ret != -ENODEV)
|
||||
netdev_warn(dev->net, "Error writing MII_ADDR\n");
|
||||
goto done;
|
||||
}
|
||||
|
||||
@ -206,7 +211,8 @@ static int __smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx,
|
||||
|
||||
ret = __smsc95xx_read_reg(dev, MII_DATA, &val, in_pm);
|
||||
if (ret < 0) {
|
||||
netdev_warn(dev->net, "Error reading MII_DATA\n");
|
||||
if (ret != -ENODEV)
|
||||
netdev_warn(dev->net, "Error reading MII_DATA\n");
|
||||
goto done;
|
||||
}
|
||||
|
||||
@ -214,6 +220,10 @@ static int __smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx,
|
||||
|
||||
done:
|
||||
mutex_unlock(&dev->phy_mutex);
|
||||
|
||||
/* Ignore -ENODEV error during disconnect() */
|
||||
if (ret == -ENODEV)
|
||||
return 0;
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -235,7 +245,8 @@ static void __smsc95xx_mdio_write(struct usbnet *dev, int phy_id,
|
||||
val = regval;
|
||||
ret = __smsc95xx_write_reg(dev, MII_DATA, val, in_pm);
|
||||
if (ret < 0) {
|
||||
netdev_warn(dev->net, "Error writing MII_DATA\n");
|
||||
if (ret != -ENODEV)
|
||||
netdev_warn(dev->net, "Error writing MII_DATA\n");
|
||||
goto done;
|
||||
}
|
||||
|
||||
@ -243,7 +254,8 @@ static void __smsc95xx_mdio_write(struct usbnet *dev, int phy_id,
|
||||
addr = mii_address_cmd(phy_id, idx, MII_WRITE_ | MII_BUSY_);
|
||||
ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
|
||||
if (ret < 0) {
|
||||
netdev_warn(dev->net, "Error writing MII_ADDR\n");
|
||||
if (ret != -ENODEV)
|
||||
netdev_warn(dev->net, "Error writing MII_ADDR\n");
|
||||
goto done;
|
||||
}
|
||||
|
||||
|
Loading…
x
Reference in New Issue
Block a user