ASoC: sirf-usp: Fixed a bug for playback and capture work at the same time
1. The startup function invoked when the playback and capture. If start playback when capturing, the registers are re-initinitialised. That cause the playback fail. So move the startup code into runtime resume. 2. Modified: If non RUNTIME_PM support, the probe need enable clock and initinitialise registers. 3. Refine code. Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
parent
90eb1ab9e4
commit
9779caf9fa
@ -103,11 +103,8 @@ static int sirf_usp_pcm_set_dai_fmt(struct snd_soc_dai *dai,
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sirf_usp_i2s_startup(struct snd_pcm_substream *substream,
|
||||
struct snd_soc_dai *dai)
|
||||
static void sirf_usp_i2s_init(struct sirf_usp *usp)
|
||||
{
|
||||
struct sirf_usp *usp = snd_soc_dai_get_drvdata(dai);
|
||||
|
||||
/* Configure RISC mode */
|
||||
regmap_update_bits(usp->regmap, USP_RISC_DSP_MODE,
|
||||
USP_RISC_DSP_SEL, ~USP_RISC_DSP_SEL);
|
||||
@ -119,19 +116,16 @@ static int sirf_usp_i2s_startup(struct snd_pcm_substream *substream,
|
||||
regmap_write(usp->regmap, USP_TX_DMA_IO_LEN, 0);
|
||||
regmap_write(usp->regmap, USP_RX_DMA_IO_LEN, 0);
|
||||
|
||||
regmap_write(usp->regmap, USP_RX_FRAME_CTRL, USP_SINGLE_SYNC_MODE);
|
||||
|
||||
regmap_write(usp->regmap, USP_TX_FRAME_CTRL, USP_TXC_SLAVE_CLK_SAMPLE);
|
||||
|
||||
/* Configure Mode2 register */
|
||||
regmap_write(usp->regmap, USP_MODE2, (1 << USP_RXD_DELAY_LEN_OFFSET) |
|
||||
(0 << USP_TXD_DELAY_LEN_OFFSET));
|
||||
(0 << USP_TXD_DELAY_LEN_OFFSET) |
|
||||
USP_TFS_CLK_SLAVE_MODE | USP_RFS_CLK_SLAVE_MODE);
|
||||
|
||||
/* Configure Mode1 register */
|
||||
regmap_write(usp->regmap, USP_MODE1,
|
||||
USP_SYNC_MODE | USP_EN | USP_TXD_ACT_EDGE_FALLING |
|
||||
USP_RFS_ACT_LEVEL_LOGIC1 | USP_TFS_ACT_LEVEL_LOGIC1 |
|
||||
USP_TX_UFLOW_REPEAT_ZERO);
|
||||
USP_TX_UFLOW_REPEAT_ZERO | USP_CLOCK_MODE_SLAVE);
|
||||
|
||||
/* Configure RX DMA IO Control register */
|
||||
regmap_write(usp->regmap, USP_RX_DMA_IO_CTRL, 0);
|
||||
@ -155,8 +149,6 @@ static int sirf_usp_i2s_startup(struct snd_pcm_substream *substream,
|
||||
/* Congiure TX FIFO Level Check register */
|
||||
regmap_write(usp->regmap, USP_TX_FIFO_LEVEL_CHK,
|
||||
TX_FIFO_SC(0x1B) | TX_FIFO_LC(0x0E) | TX_FIFO_HC(0x04));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sirf_usp_pcm_hw_params(struct snd_pcm_substream *substream,
|
||||
@ -204,23 +196,19 @@ static int sirf_usp_pcm_hw_params(struct snd_pcm_substream *substream,
|
||||
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
||||
regmap_update_bits(usp->regmap, USP_TX_FRAME_CTRL,
|
||||
USP_TXC_DATA_LEN_MASK | USP_TXC_FRAME_LEN_MASK
|
||||
| USP_TXC_SHIFTER_LEN_MASK,
|
||||
| USP_TXC_SHIFTER_LEN_MASK | USP_TXC_SLAVE_CLK_SAMPLE,
|
||||
((data_len - 1) << USP_TXC_DATA_LEN_OFFSET)
|
||||
| ((frame_len - 1) << USP_TXC_FRAME_LEN_OFFSET)
|
||||
| ((shifter_len - 1) << USP_TXC_SHIFTER_LEN_OFFSET));
|
||||
| ((shifter_len - 1) << USP_TXC_SHIFTER_LEN_OFFSET)
|
||||
| USP_TXC_SLAVE_CLK_SAMPLE);
|
||||
else
|
||||
regmap_update_bits(usp->regmap, USP_RX_FRAME_CTRL,
|
||||
USP_RXC_DATA_LEN_MASK | USP_RXC_FRAME_LEN_MASK
|
||||
| USP_RXC_SHIFTER_LEN_MASK,
|
||||
| USP_RXC_SHIFTER_LEN_MASK | USP_SINGLE_SYNC_MODE,
|
||||
((data_len - 1) << USP_RXC_DATA_LEN_OFFSET)
|
||||
| ((frame_len - 1) << USP_RXC_FRAME_LEN_OFFSET)
|
||||
| ((shifter_len - 1) << USP_RXC_SHIFTER_LEN_OFFSET));
|
||||
|
||||
regmap_update_bits(usp->regmap, USP_MODE1,
|
||||
USP_CLOCK_MODE_SLAVE, USP_CLOCK_MODE_SLAVE);
|
||||
regmap_update_bits(usp->regmap, USP_MODE2,
|
||||
USP_TFS_CLK_SLAVE_MODE | USP_RFS_CLK_SLAVE_MODE,
|
||||
USP_TFS_CLK_SLAVE_MODE | USP_RFS_CLK_SLAVE_MODE);
|
||||
| ((shifter_len - 1) << USP_RXC_SHIFTER_LEN_OFFSET)
|
||||
| USP_SINGLE_SYNC_MODE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -253,7 +241,6 @@ static int sirf_usp_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
|
||||
}
|
||||
|
||||
static const struct snd_soc_dai_ops sirf_usp_pcm_dai_ops = {
|
||||
.startup = sirf_usp_i2s_startup,
|
||||
.trigger = sirf_usp_pcm_trigger,
|
||||
.set_fmt = sirf_usp_pcm_set_dai_fmt,
|
||||
.hw_params = sirf_usp_pcm_hw_params,
|
||||
@ -282,7 +269,6 @@ static struct snd_soc_dai_driver sirf_usp_pcm_dai = {
|
||||
.ops = &sirf_usp_pcm_dai_ops,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int sirf_usp_pcm_runtime_suspend(struct device *dev)
|
||||
{
|
||||
struct sirf_usp *usp = dev_get_drvdata(dev);
|
||||
@ -293,9 +279,15 @@ static int sirf_usp_pcm_runtime_suspend(struct device *dev)
|
||||
static int sirf_usp_pcm_runtime_resume(struct device *dev)
|
||||
{
|
||||
struct sirf_usp *usp = dev_get_drvdata(dev);
|
||||
return clk_prepare_enable(usp->clk);
|
||||
int ret;
|
||||
ret = clk_prepare_enable(usp->clk);
|
||||
if (ret) {
|
||||
dev_err(dev, "clk_enable failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
sirf_usp_i2s_init(usp);
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
static int sirf_usp_pcm_suspend(struct device *dev)
|
||||
@ -369,6 +361,11 @@ static int sirf_usp_pcm_probe(struct platform_device *pdev)
|
||||
}
|
||||
|
||||
pm_runtime_enable(&pdev->dev);
|
||||
if (!pm_runtime_enabled(&pdev->dev)) {
|
||||
ret = sirf_usp_pcm_runtime_resume(&pdev->dev);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = devm_snd_soc_register_component(&pdev->dev, &sirf_usp_component,
|
||||
&sirf_usp_pcm_dai, 1);
|
||||
@ -381,7 +378,10 @@ static int sirf_usp_pcm_probe(struct platform_device *pdev)
|
||||
|
||||
static int sirf_usp_pcm_remove(struct platform_device *pdev)
|
||||
{
|
||||
pm_runtime_disable(&pdev->dev);
|
||||
if (!pm_runtime_enabled(&pdev->dev))
|
||||
sirf_usp_pcm_runtime_suspend(&pdev->dev);
|
||||
else
|
||||
pm_runtime_disable(&pdev->dev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user