arm64: dts: rockchip: add analog audio to RK3588 EVB1
Add support for the EVB1 analog audio to its devicetree. Only the headphone has been tested, since I don't have matching peripherals to test headset or speakers. I also didn't manage to record sound from the onboard microphone, but that also fails with the vendor kernel. Thus I assume the microphone on my board is fried. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20231109184453.108676-2-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
parent
b85ea95d08
commit
97c39c7a09
@ -56,6 +56,63 @@
|
||||
};
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
simple-audio-card,name = "RK3588 EVB1 Audio";
|
||||
simple-audio-card,aux-devs = <&_headphone>, <&_speaker>;
|
||||
simple-audio-card,bitclock-master = <&masterdai>;
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,frame-master = <&masterdai>;
|
||||
simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,pin-switches = "Headphones", "Speaker";
|
||||
simple-audio-card,routing =
|
||||
"Speaker Amplifier INL", "LOUT2",
|
||||
"Speaker Amplifier INR", "ROUT2",
|
||||
"Speaker", "Speaker Amplifier OUTL",
|
||||
"Speaker", "Speaker Amplifier OUTR",
|
||||
"Headphones Amplifier INL", "LOUT1",
|
||||
"Headphones Amplifier INR", "ROUT1",
|
||||
"Headphones", "Headphones Amplifier OUTL",
|
||||
"Headphones", "Headphones Amplifier OUTR",
|
||||
"LINPUT1", "Onboard Microphone",
|
||||
"RINPUT1", "Onboard Microphone",
|
||||
"LINPUT2", "Microphone Jack",
|
||||
"RINPUT2", "Microphone Jack";
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Microphone Jack",
|
||||
"Microphone", "Onboard Microphone",
|
||||
"Headphone", "Headphones",
|
||||
"Speaker", "Speaker";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
};
|
||||
|
||||
masterdai: simple-audio-card,codec {
|
||||
sound-dai = <&es8388>;
|
||||
system-clock-frequency = <12288000>;
|
||||
};
|
||||
};
|
||||
|
||||
amp_headphone: headphone-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&headphone_amplifier_en>;
|
||||
sound-name-prefix = "Headphones Amplifier";
|
||||
};
|
||||
|
||||
amp_speaker: speaker-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&speaker_amplifier_en>;
|
||||
sound-name-prefix = "Speaker Amplifier";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
power-supply = <&vcc12v_dcin>;
|
||||
@ -240,6 +297,32 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
es8388: audio-codec@11 {
|
||||
compatible = "everest,es8388";
|
||||
reg = <0x11>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
AVDD-supply = <&avcc_1v8_codec_s0>;
|
||||
DVDD-supply = <&avcc_1v8_codec_s0>;
|
||||
HPVDD-supply = <&vcc_3v3_s0>;
|
||||
PVDD-supply = <&vcc_3v3_s0>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy: ethernet-phy@1 {
|
||||
/* RTL8211F */
|
||||
@ -273,6 +356,20 @@
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
audio {
|
||||
hp_detect: headphone-detect {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
headphone_amplifier_en: headphone-amplifier-en {
|
||||
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
speaker_amplifier_en: speaker-amplifier-en {
|
||||
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
rtl8111 {
|
||||
rtl8111_isolate: rtl8111-isolate {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
|
Loading…
x
Reference in New Issue
Block a user