amd74xx: remove amd_ide_chips table
* Remove no longer needed assertion from amd74xx_probe(). * Factor out cable detection for AMD7409 to amd7409_cable_detect() and for chipsets >= AMD7411 to amd7411_cable_detect(). * Use dev->vendor and dev->device instead of amd_config->udma_mask when selecting cable detection method and checking for broken FIFO support in init_chipset_amd74xx(). * Remove no longer needed AMD_BAD_FIFO define. * Add 'swdma' parameter for setting .swdma_mask to DECLARE_AMD_DEV() macro. * Add 'udma' parameter for setting .udma_mask to DECLARE_{AMD,NV}_DEV() macro. * Keep a copy of a current amd74xx_chipsets[] entry in amd74xx_probe() in order to fix ->swdma_mask on early AMD7409 revisions and ->udma_mask on Serenade mainboards. * Remove no longer needed fixups from init_chipset_amd74xx() and AMD_CHECK_{SWDMA,SERENADE} defines. * Move printing banner message from init_chipset_amd74xx() to amd74xx_probe(), also remove incorrect comment while at it. * Use hwif->ultra_mask instead of amd_config->udma_mask in amd_set_drive(). * Add 'udma_mask' argument to amd_set_speed() and pass UDMA mask from amd_set_drive() instead of using amd_config->udma_mask. * Move amd_config->base from AMD_* defines to users of these defines and add 0x40 the defined values. Then add amd_offset() inline helper for selecting offset from 0x40 base (needed for nVidia controllers) and finally use it in amd_set_speed(), amd7411_cable_detect() and init_chipset_amd74xx() instead of amd_config->base. * Remove no longer needed AMD_BAD_SWDMA define, ->{swdma,ultra}_mask setup from init_hwif_amd74xx(), amd_{config,chipset} variables and amd_ide_chips table. * Fix init_chipset_amd74xx() comment. * Bump driver version. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
parent
ecf3279639
commit
993da8f9ea
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Version 2.24
|
||||
* Version 2.25
|
||||
*
|
||||
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
|
||||
* IDE driver for Linux.
|
||||
@ -28,81 +28,46 @@
|
||||
|
||||
#include "ide-timing.h"
|
||||
|
||||
#define AMD_IDE_CONFIG (0x01 + amd_config->base)
|
||||
#define AMD_CABLE_DETECT (0x02 + amd_config->base)
|
||||
#define AMD_DRIVE_TIMING (0x08 + amd_config->base)
|
||||
#define AMD_8BIT_TIMING (0x0e + amd_config->base)
|
||||
#define AMD_ADDRESS_SETUP (0x0c + amd_config->base)
|
||||
#define AMD_UDMA_TIMING (0x10 + amd_config->base)
|
||||
|
||||
#define AMD_CHECK_SWDMA 0x08
|
||||
#define AMD_BAD_SWDMA 0x10
|
||||
#define AMD_BAD_FIFO 0x20
|
||||
#define AMD_CHECK_SERENADE 0x40
|
||||
|
||||
/*
|
||||
* AMD SouthBridge chips.
|
||||
*/
|
||||
|
||||
static struct amd_ide_chip {
|
||||
unsigned short id;
|
||||
u8 base;
|
||||
u8 udma_mask;
|
||||
u8 flags;
|
||||
} amd_ide_chips[] = {
|
||||
{ PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, ATA_UDMA2, AMD_BAD_SWDMA },
|
||||
{ PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, ATA_UDMA4, AMD_CHECK_SWDMA },
|
||||
{ PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, ATA_UDMA5, AMD_BAD_FIFO },
|
||||
{ PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, ATA_UDMA5, },
|
||||
{ PCI_DEVICE_ID_AMD_8111_IDE, 0x40, ATA_UDMA6, AMD_CHECK_SERENADE },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, ATA_UDMA5, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, ATA_UDMA6, },
|
||||
{ PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, ATA_UDMA5, },
|
||||
{ 0 }
|
||||
enum {
|
||||
AMD_IDE_CONFIG = 0x41,
|
||||
AMD_CABLE_DETECT = 0x42,
|
||||
AMD_DRIVE_TIMING = 0x48,
|
||||
AMD_8BIT_TIMING = 0x4e,
|
||||
AMD_ADDRESS_SETUP = 0x4c,
|
||||
AMD_UDMA_TIMING = 0x50,
|
||||
};
|
||||
|
||||
static struct amd_ide_chip *amd_config;
|
||||
static const struct ide_port_info *amd_chipset;
|
||||
static unsigned int amd_80w;
|
||||
static unsigned int amd_clock;
|
||||
|
||||
static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
|
||||
static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
|
||||
|
||||
static inline u8 amd_offset(struct pci_dev *dev)
|
||||
{
|
||||
return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* amd_set_speed() writes timing values to the chipset registers
|
||||
*/
|
||||
|
||||
static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing)
|
||||
static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
|
||||
struct ide_timing *timing)
|
||||
{
|
||||
unsigned char t;
|
||||
u8 t = 0, offset = amd_offset(dev);
|
||||
|
||||
pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t);
|
||||
pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
|
||||
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
|
||||
pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t);
|
||||
pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
|
||||
|
||||
pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)),
|
||||
pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
|
||||
((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
|
||||
|
||||
pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn),
|
||||
pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
|
||||
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
|
||||
|
||||
switch (amd_config->udma_mask) {
|
||||
switch (udma_mask) {
|
||||
case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
|
||||
case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
|
||||
case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
|
||||
@ -110,7 +75,7 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
|
||||
default: return;
|
||||
}
|
||||
|
||||
pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t);
|
||||
pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t);
|
||||
}
|
||||
|
||||
/*
|
||||
@ -120,12 +85,14 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
|
||||
|
||||
static void amd_set_drive(ide_drive_t *drive, const u8 speed)
|
||||
{
|
||||
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
|
||||
struct ide_timing t, p;
|
||||
int T, UT;
|
||||
u8 udma_mask = hwif->ultra_mask;
|
||||
|
||||
T = 1000000000 / amd_clock;
|
||||
UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2);
|
||||
UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
|
||||
|
||||
ide_timing_compute(drive, speed, &t, T, UT);
|
||||
|
||||
@ -137,7 +104,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
|
||||
if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
|
||||
if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
|
||||
|
||||
amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
|
||||
amd_set_speed(hwif->pci_dev, drive->dn, udma_mask, &t);
|
||||
}
|
||||
|
||||
/*
|
||||
@ -149,67 +116,68 @@ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
||||
amd_set_drive(drive, XFER_PIO_0 + pio);
|
||||
}
|
||||
|
||||
/*
|
||||
* The initialization callback. Here we determine the IDE chip type
|
||||
* and initialize its drive independent registers.
|
||||
*/
|
||||
|
||||
static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const char *name)
|
||||
static void __devinit amd7409_cable_detect(struct pci_dev *dev,
|
||||
const char *name)
|
||||
{
|
||||
/* no host side cable detection */
|
||||
amd_80w = 0x03;
|
||||
}
|
||||
|
||||
static void __devinit amd7411_cable_detect(struct pci_dev *dev,
|
||||
const char *name)
|
||||
{
|
||||
unsigned char t;
|
||||
unsigned int u;
|
||||
int i;
|
||||
u32 u = 0;
|
||||
u8 t = 0, offset = amd_offset(dev);
|
||||
|
||||
pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
|
||||
pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
|
||||
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
|
||||
for (i = 24; i >= 0; i -= 8)
|
||||
if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
|
||||
printk(KERN_WARNING "%s: BIOS didn't set cable bits "
|
||||
"correctly. Enabling workaround.\n",
|
||||
name);
|
||||
amd_80w |= (1 << (1 - (i >> 4)));
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* Check for bad SWDMA.
|
||||
* The initialization callback. Initialize drive independent registers.
|
||||
*/
|
||||
|
||||
if (amd_config->flags & AMD_CHECK_SWDMA) {
|
||||
if (dev->revision <= 7)
|
||||
amd_config->flags |= AMD_BAD_SWDMA;
|
||||
}
|
||||
static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
|
||||
const char *name)
|
||||
{
|
||||
u8 t = 0, offset = amd_offset(dev);
|
||||
|
||||
/*
|
||||
* Check 80-wire cable presence.
|
||||
*/
|
||||
|
||||
switch (amd_config->udma_mask) {
|
||||
|
||||
case ATA_UDMA6:
|
||||
case ATA_UDMA5:
|
||||
pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
|
||||
pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
|
||||
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
|
||||
for (i = 24; i >= 0; i -= 8)
|
||||
if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
|
||||
printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n",
|
||||
amd_chipset->name);
|
||||
amd_80w |= (1 << (1 - (i >> 4)));
|
||||
}
|
||||
break;
|
||||
|
||||
case ATA_UDMA4:
|
||||
/* no host side cable detection */
|
||||
amd_80w = 0x03;
|
||||
break;
|
||||
}
|
||||
if (dev->vendor == PCI_VENDOR_ID_AMD &&
|
||||
dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
|
||||
; /* no UDMA > 2 */
|
||||
else if (dev->vendor == PCI_VENDOR_ID_AMD &&
|
||||
dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
|
||||
amd7409_cable_detect(dev, name);
|
||||
else
|
||||
amd7411_cable_detect(dev, name);
|
||||
|
||||
/*
|
||||
* Take care of prefetch & postwrite.
|
||||
*/
|
||||
|
||||
pci_read_config_byte(dev, AMD_IDE_CONFIG, &t);
|
||||
pci_write_config_byte(dev, AMD_IDE_CONFIG,
|
||||
(amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0));
|
||||
|
||||
/*
|
||||
* Take care of incorrectly wired Serenade mainboards.
|
||||
*/
|
||||
|
||||
if ((amd_config->flags & AMD_CHECK_SERENADE) &&
|
||||
dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
|
||||
dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
|
||||
amd_config->udma_mask = ATA_UDMA5;
|
||||
pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
|
||||
/*
|
||||
* Check for broken FIFO support.
|
||||
*/
|
||||
if (dev->vendor == PCI_VENDOR_ID_AMD &&
|
||||
dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
|
||||
t &= 0x0f;
|
||||
else
|
||||
t |= 0xf0;
|
||||
pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
|
||||
|
||||
/*
|
||||
* Determine the system bus clock.
|
||||
@ -225,18 +193,10 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
|
||||
|
||||
if (amd_clock < 20000 || amd_clock > 50000) {
|
||||
printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n",
|
||||
amd_chipset->name, amd_clock);
|
||||
name, amd_clock);
|
||||
amd_clock = 33333;
|
||||
}
|
||||
|
||||
/*
|
||||
* Print the boot message.
|
||||
*/
|
||||
|
||||
printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
|
||||
amd_chipset->name, pci_name(dev), dev->revision,
|
||||
amd_dma[fls(amd_config->udma_mask) - 1]);
|
||||
|
||||
return dev->irq;
|
||||
}
|
||||
|
||||
@ -251,10 +211,6 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
|
||||
if (!hwif->dma_base)
|
||||
return;
|
||||
|
||||
hwif->ultra_mask = amd_config->udma_mask;
|
||||
if (amd_config->flags & AMD_BAD_SWDMA)
|
||||
hwif->swdma_mask = 0x00;
|
||||
|
||||
if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
|
||||
if ((amd_80w >> hwif->channel) & 1)
|
||||
hwif->cbl = ATA_CBL_PATA80;
|
||||
@ -272,7 +228,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
|
||||
IDE_HFLAG_UNMASK_IRQS | \
|
||||
IDE_HFLAG_BOOTABLE)
|
||||
|
||||
#define DECLARE_AMD_DEV(name_str) \
|
||||
#define DECLARE_AMD_DEV(name_str, swdma, udma) \
|
||||
{ \
|
||||
.name = name_str, \
|
||||
.init_chipset = init_chipset_amd74xx, \
|
||||
@ -280,11 +236,12 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
|
||||
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
|
||||
.host_flags = IDE_HFLAGS_AMD, \
|
||||
.pio_mask = ATA_PIO5, \
|
||||
.swdma_mask = ATA_SWDMA2, \
|
||||
.swdma_mask = swdma, \
|
||||
.mwdma_mask = ATA_MWDMA2, \
|
||||
.udma_mask = udma, \
|
||||
}
|
||||
|
||||
#define DECLARE_NV_DEV(name_str) \
|
||||
#define DECLARE_NV_DEV(name_str, udma) \
|
||||
{ \
|
||||
.name = name_str, \
|
||||
.init_chipset = init_chipset_amd74xx, \
|
||||
@ -294,45 +251,61 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
|
||||
.pio_mask = ATA_PIO5, \
|
||||
.swdma_mask = ATA_SWDMA2, \
|
||||
.mwdma_mask = ATA_MWDMA2, \
|
||||
.udma_mask = udma, \
|
||||
}
|
||||
|
||||
static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
|
||||
/* 0 */ DECLARE_AMD_DEV("AMD7401"),
|
||||
/* 1 */ DECLARE_AMD_DEV("AMD7409"),
|
||||
/* 2 */ DECLARE_AMD_DEV("AMD7411"),
|
||||
/* 3 */ DECLARE_AMD_DEV("AMD7441"),
|
||||
/* 4 */ DECLARE_AMD_DEV("AMD8111"),
|
||||
/* 0 */ DECLARE_AMD_DEV("AMD7401", 0x00, ATA_UDMA2),
|
||||
/* 1 */ DECLARE_AMD_DEV("AMD7409", ATA_SWDMA2, ATA_UDMA4),
|
||||
/* 2 */ DECLARE_AMD_DEV("AMD7411", ATA_SWDMA2, ATA_UDMA5),
|
||||
/* 3 */ DECLARE_AMD_DEV("AMD7441", ATA_SWDMA2, ATA_UDMA5),
|
||||
/* 4 */ DECLARE_AMD_DEV("AMD8111", ATA_SWDMA2, ATA_UDMA6),
|
||||
|
||||
/* 5 */ DECLARE_NV_DEV("NFORCE"),
|
||||
/* 6 */ DECLARE_NV_DEV("NFORCE2"),
|
||||
/* 7 */ DECLARE_NV_DEV("NFORCE2-U400R"),
|
||||
/* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA"),
|
||||
/* 9 */ DECLARE_NV_DEV("NFORCE3-150"),
|
||||
/* 10 */ DECLARE_NV_DEV("NFORCE3-250"),
|
||||
/* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA"),
|
||||
/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
|
||||
/* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
|
||||
/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
|
||||
/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
|
||||
/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
|
||||
/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"),
|
||||
/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"),
|
||||
/* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"),
|
||||
/* 20 */ DECLARE_NV_DEV("NFORCE-MCP73"),
|
||||
/* 21 */ DECLARE_NV_DEV("NFORCE-MCP77"),
|
||||
/* 22 */ DECLARE_AMD_DEV("AMD5536"),
|
||||
/* 5 */ DECLARE_NV_DEV("NFORCE", ATA_UDMA5),
|
||||
/* 6 */ DECLARE_NV_DEV("NFORCE2", ATA_UDMA6),
|
||||
/* 7 */ DECLARE_NV_DEV("NFORCE2-U400R", ATA_UDMA6),
|
||||
/* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA", ATA_UDMA6),
|
||||
/* 9 */ DECLARE_NV_DEV("NFORCE3-150", ATA_UDMA6),
|
||||
/* 10 */ DECLARE_NV_DEV("NFORCE3-250", ATA_UDMA6),
|
||||
/* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA", ATA_UDMA6),
|
||||
/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2", ATA_UDMA6),
|
||||
/* 13 */ DECLARE_NV_DEV("NFORCE-CK804", ATA_UDMA6),
|
||||
/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04", ATA_UDMA6),
|
||||
/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51", ATA_UDMA6),
|
||||
/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55", ATA_UDMA6),
|
||||
/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61", ATA_UDMA6),
|
||||
/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65", ATA_UDMA6),
|
||||
/* 19 */ DECLARE_NV_DEV("NFORCE-MCP67", ATA_UDMA6),
|
||||
/* 20 */ DECLARE_NV_DEV("NFORCE-MCP73", ATA_UDMA6),
|
||||
/* 21 */ DECLARE_NV_DEV("NFORCE-MCP77", ATA_UDMA6),
|
||||
|
||||
/* 22 */ DECLARE_AMD_DEV("AMD5536", ATA_SWDMA2, ATA_UDMA5),
|
||||
};
|
||||
|
||||
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
||||
{
|
||||
amd_chipset = amd74xx_chipsets + id->driver_data;
|
||||
amd_config = amd_ide_chips + id->driver_data;
|
||||
if (dev->device != amd_config->id) {
|
||||
printk(KERN_ERR "%s: assertion 0x%02x == 0x%02x failed !\n",
|
||||
pci_name(dev), dev->device, amd_config->id);
|
||||
return -ENODEV;
|
||||
struct ide_port_info d;
|
||||
u8 idx = id->driver_data;
|
||||
|
||||
d = amd74xx_chipsets[idx];
|
||||
|
||||
/*
|
||||
* Check for bad SWDMA and incorrectly wired Serenade mainboards.
|
||||
*/
|
||||
if (idx == 1) {
|
||||
if (dev->revision <= 7)
|
||||
d.swdma_mask = 0;
|
||||
} else if (idx == 4) {
|
||||
if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
|
||||
dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
|
||||
d.udma_mask = ATA_UDMA5;
|
||||
}
|
||||
return ide_setup_pci_device(dev, amd_chipset);
|
||||
|
||||
printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
|
||||
d.name, pci_name(dev), dev->revision,
|
||||
amd_dma[fls(d.udma_mask) - 1]);
|
||||
|
||||
return ide_setup_pci_device(dev, &d);
|
||||
}
|
||||
|
||||
static const struct pci_device_id amd74xx_pci_tbl[] = {
|
||||
|
Loading…
Reference in New Issue
Block a user