iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

can: ti_hecc: convert block comments to network style comments

Browse Source 
This patch converts all block comments to network subsystem style block
comments.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This commit is contained in:
Marc Kleine-Budde 2019-07-24 14:16:29 +02:00
parent 175a60b73b
commit 99a3d7c122
1 changed files with 7 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
drivers/net/can/ti_hecc.c
View File

@ -46,8 +46,7 @@ MODULE_VERSION(HECC_MODULE_VERSION);
#define HECC_MAX_MAILBOXES 32 /* hardware mailboxes - do not change */
#define MAX_TX_PRIO 0x3F /* hardware value - do not change */
/*
* Important Note: TX mailbox configuration
/* Important Note: TX mailbox configuration
* TX mailboxes should be restricted to the number of SKB buffers to avoid
* maintaining SKB buffers separately. TX mailboxes should be a power of 2
* for the mailbox logic to work. Top mailbox numbers are reserved for RX
@ -309,8 +308,7 @@ static void ti_hecc_reset(struct net_device *ndev)
/* Set change control request and wait till enabled */
hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
/*
* INFO: It has been observed that at times CCE bit may not be
/* INFO: It has been observed that at times CCE bit may not be
* set and hw seems to be ok even if this bit is not set so
* timing out with a timing of 1ms to respect the specs
*/
@ -320,8 +318,7 @@ static void ti_hecc_reset(struct net_device *ndev)
udelay(10);
}
/*
* Note: On HECC, BTC can be programmed only in initialization mode, so
/* Note: On HECC, BTC can be programmed only in initialization mode, so
* it is expected that the can bittiming parameters are set via ip
* utility before the device is opened
*/
@ -330,13 +327,11 @@ static void ti_hecc_reset(struct net_device *ndev)
/* Clear CCR (and CANMC register) and wait for CCE = 0 enable */
hecc_write(priv, HECC_CANMC, 0);
/*
* INFO: CAN net stack handles bus off and hence disabling auto-bus-on
/* INFO: CAN net stack handles bus off and hence disabling auto-bus-on
* hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_ABO);
*/
/*
* INFO: It has been observed that at times CCE bit may not be
/* INFO: It has been observed that at times CCE bit may not be
* set and hw seems to be ok even if this bit is not set so
*/
cnt = HECC_CCE_WAIT_COUNT;
@ -439,8 +434,7 @@ static int ti_hecc_get_berr_counter(const struct net_device *ndev,
return 0;
}
/*
* ti_hecc_xmit: HECC Transmit
/* ti_hecc_xmit: HECC Transmit
*
* The transmit mailboxes start from 0 to HECC_MAX_TX_MBOX. In HECC the
* priority of the mailbox for tranmission is dependent upon priority setting
@ -601,8 +595,7 @@ static int ti_hecc_error(struct net_device *ndev, int int_status,
hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
}
/*
* Need to check busoff condition in error status register too to
/* Need to check busoff condition in error status register too to
* ensure warning interrupts don't hog the system
*/
if ((int_status & HECC_CANGIF_BOIF) || (err_status & HECC_CANES_BO)) {