iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branches 'pm-cpuidle', 'powercap', 'irq-pm' and 'acpi-resources'

Browse Source 
* pm-cpuidle:
  cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs
  cpuidle: mvebu: Fix the CPU PM notifier usage

* powercap:
  powercap / RAPL: handle domains with different energy units

* irq-pm:
  rtc: at91rm9200: double locking bug in at91_rtc_interrupt()

* acpi-resources:
  Revert "x86/PCI: Refine the way to release PCI IRQ resources"
This commit is contained in:
Rafael J. Wysocki 2015-03-21 00:39:12 +01:00
commit 9c86286a60
266 changed files with 2882 additions and 1524 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/arm/exynos/power_domain.txt
View File

@ -22,6 +22,8 @@ Optional Properties:
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
- power-domains: phandle pointing to the parent power domain, for more details
see Documentation/devicetree/bindings/power/power_domain.txt
Node of a device using power domains must have a power-domains property
defined with a phandle to respective power domain.

4
Documentation/devicetree/bindings/arm/sti.txt
View File

@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
Required root node property:
compatible = "st,stih407";
Boards with the ST STiH410 SoC shall have the following properties:
Required root node property:
compatible = "st,stih410";
Boards with the ST STiH418 SoC shall have the following properties:
Required root node property:
compatible = "st,stih418";

5
Documentation/devicetree/bindings/net/apm-xgene-enet.txt
View File

@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in
APM X-Gene SoC.
Required properties for all the ethernet interfaces:
- compatible: Should be "apm,xgene-enet"
- compatible: Should state binding information from the following list,
- "apm,xgene-enet": RGMII based 1G interface
- "apm,xgene1-sgenet": SGMII based 1G interface
- "apm,xgene1-xgenet": XFI based 10G interface
- reg: Address and length of the register set for the device. It contains the
information of registers in the same order as described by reg-names
- reg-names: Should contain the register set names

29
Documentation/devicetree/bindings/power/power_domain.txt
View File

@ -19,6 +19,16 @@ Required properties:
providing multiple PM domains (e.g. power controllers), but can be any value
as specified by device tree binding documentation of particular provider.
Optional properties:
- power-domains : A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle.
Some power domains might be powered from another power domain (or have
other hardware specific dependencies). For representing such dependency
a standard PM domain consumer binding is used. When provided, all domains
created by the given provider should be subdomains of the domain
specified by this binding. More details about power domain specifier are
available in the next section.
Example:
power: power-controller@12340000 {
@ -30,6 +40,25 @@ Example:
The node above defines a power controller that is a PM domain provider and
expects one cell as its phandle argument.
Example 2:
parent: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12340000 0x1000>;
#power-domain-cells = <1>;
};
child: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12341000 0x1000>;
power-domains = <&parent 0>;
#power-domain-cells = <1>;
};
The nodes above define two power controllers: 'parent' and 'child'.
Domains created by the 'child' power controller are subdomains of '0' power
domain provided by the 'parent' power controller.
==PM domain consumers==
Required properties:

0
Documentation/devicetree/bindings/serial/of-serial.txt → Documentation/devicetree/bindings/serial/8250.txt
View File

19
Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt Normal file
View File

@ -0,0 +1,19 @@
ETRAX FS UART
Required properties:
- compatible : "axis,etraxfs-uart"
- reg: offset and length of the register set for the device.
- interrupts: device interrupt
Optional properties:
- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
line respectively.
Example:
serial@b00260000 {
compatible = "axis,etraxfs-uart";
reg = <0xb0026000 0x1000>;
interrupts = <68>;
status = "disabled";
};

3
Documentation/devicetree/bindings/submitting-patches.txt
View File

@ -12,6 +12,9 @@ I. For patch submitters
devicetree@vger.kernel.org
and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
all of the DT maintainers.
3) The Documentation/ portion of the patch should come in the series before
the code implementing the binding.

2
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -20,6 +20,7 @@ amlogic Amlogic, Inc.
ams AMS AG
amstaos AMS-Taos Inc.
apm Applied Micro Circuits Corporation (APM)
arasan Arasan Chip Systems
arm ARM Ltd.
armadeus ARMadeus Systems SARL
asahi-kasei Asahi Kasei Corp.
@ -27,6 +28,7 @@ atmel Atmel Corporation
auo AU Optronics Corporation
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
buffalo Buffalo, Inc.

5
Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
View File

@ -26,6 +26,11 @@ Optional properties:
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
CAUTION: This property should be used with care, it actually makes the
watchdog not counting when the CPU is in idle state, therefore the
watchdog reset time depends on mean CPU usage and will not reset at all
if the CPU stop working while it is in idle state, which is probably
not what you want.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.

17
MAINTAINERS
View File

@ -1030,6 +1030,16 @@ F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE VYBRID ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
R: Stefan Agner <stefan@agner.ch>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
F: arch/arm/mach-imx/*vf610*
F: arch/arm/boot/dts/vf*
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1188,6 +1198,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
M: Gregory Clement <gregory.clement@free-electrons.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-dove/
@ -2107,7 +2118,6 @@ F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
M: Matt Porter <mporter@linaro.org>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
@ -2369,8 +2379,9 @@ F: arch/x86/include/asm/tce.h
CAN NETWORK LAYER
M: Oliver Hartkopp <socketcan@hartkopp.net>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
W: https://github.com/linux-can
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
@ -2386,7 +2397,7 @@ CAN NETWORK DRIVERS
M: Wolfgang Grandegger <wg@grandegger.com>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
W: https://github.com/linux-can
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 0
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc4
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*

1
arch/arm/Makefile
View File

@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32

8
arch/arm/boot/dts/am335x-bone-common.dtsi
View File

@ -301,3 +301,11 @@
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
};
&aes {
status = "okay";
};
&sham {
status = "okay";
};

8
arch/arm/boot/dts/am335x-bone.dts
View File

@ -24,11 +24,3 @@
&mmc1 {
vmmc-supply = <&ldo3_reg>;
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};

4
arch/arm/boot/dts/am335x-lxm.dts
View File

@ -328,6 +328,10 @@
dual_emac_res_vlan = <3>;
};
&phy_sel {
rmii-clock-ext;
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;

6
arch/arm/boot/dts/am33xx-clocks.dtsi
View File

@ -99,7 +99,7 @@
ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
@ -107,7 +107,7 @@
ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
@ -115,7 +115,7 @@
ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};

12
arch/arm/boot/dts/am43xx-clocks.dtsi
View File

@ -107,7 +107,7 @@
ehrpwm0_tbclk: ehrpwm0_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
@ -115,7 +115,7 @@
ehrpwm1_tbclk: ehrpwm1_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
@ -123,7 +123,7 @@
ehrpwm2_tbclk: ehrpwm2_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};
@ -131,7 +131,7 @@
ehrpwm3_tbclk: ehrpwm3_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <4>;
reg = <0x0664>;
};
@ -139,7 +139,7 @@
ehrpwm4_tbclk: ehrpwm4_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <5>;
reg = <0x0664>;
};
@ -147,7 +147,7 @@
ehrpwm5_tbclk: ehrpwm5_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <6>;
reg = <0x0664>;
};

7
arch/arm/boot/dts/at91sam9260.dtsi
View File

@ -494,12 +494,12 @@
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
@ -853,7 +853,7 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9260-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
@ -976,7 +976,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

9
arch/arm/boot/dts/at91sam9261.dtsi
View File

@ -124,11 +124,12 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&udc_clk>, <&udpck>;
clock-names = "usb_clk", "udc_clk", "udpck";
clocks = <&udc_clk>, <&udpck>;
clock-names = "pclk", "hclk";
atmel,matrix = <&matrix>;
status = "disabled";
};
@ -262,7 +263,7 @@
};
matrix: matrix@ffffee00 {
compatible = "atmel,at91sam9260-bus-matrix";
compatible = "atmel,at91sam9260-bus-matrix", "syscon";
reg = <0xffffee00 0x200>;
};

5
arch/arm/boot/dts/at91sam9263.dtsi
View File

@ -69,7 +69,7 @@
sram1: sram@00500000 {
compatible = "mmio-sram";
reg = <0x00300000 0x4000>;
reg = <0x00500000 0x4000>;
};
ahb {
@ -856,7 +856,7 @@
};
usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9263-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
@ -905,7 +905,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

3
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -1116,7 +1116,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1301,7 +1300,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};

1
arch/arm/boot/dts/at91sam9n12.dtsi
View File

@ -894,7 +894,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

5
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -1066,7 +1066,7 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clocks = <&utmi>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
@ -1130,7 +1130,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1186,7 +1185,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};

10
arch/arm/boot/dts/dra7-evm.dts
View File

@ -263,17 +263,15 @@
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
};

10
arch/arm/boot/dts/dra72-evm.dts
View File

@ -119,17 +119,15 @@
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};

90
arch/arm/boot/dts/dra7xx-clocks.dtsi
View File

@ -243,10 +243,18 @@
ti,invert-autoidle-bit;
};
dpll_core_byp_mux: dpll_core_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
};
dpll_core_ck: dpll_core_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
@ -309,10 +317,18 @@
clock-div = <1>;
};
dpll_dsp_byp_mux: dpll_dsp_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0240>;
};
dpll_dsp_ck: dpll_dsp_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
};
@ -335,10 +351,18 @@
clock-div = <1>;
};
dpll_iva_byp_mux: dpll_iva_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
};
dpll_iva_ck: dpll_iva_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
};
@ -361,10 +385,18 @@
clock-div = <1>;
};
dpll_gpu_byp_mux: dpll_gpu_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02e4>;
};
dpll_gpu_ck: dpll_gpu_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
};
@ -398,10 +430,18 @@
clock-div = <1>;
};
dpll_ddr_byp_mux: dpll_ddr_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x021c>;
};
dpll_ddr_ck: dpll_ddr_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
};
@ -416,10 +456,18 @@
ti,invert-autoidle-bit;
};
dpll_gmac_byp_mux: dpll_gmac_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02b4>;
};
dpll_gmac_ck: dpll_gmac_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
};
@ -482,10 +530,18 @@
clock-div = <1>;
};
dpll_eve_byp_mux: dpll_eve_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0290>;
};
dpll_eve_ck: dpll_eve_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
};
@ -1249,10 +1305,18 @@
clock-div = <1>;
};
dpll_per_byp_mux: dpll_per_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
};
dpll_per_ck: dpll_per_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
@ -1275,10 +1339,18 @@
clock-div = <1>;
};
dpll_usb_byp_mux: dpll_usb_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
};
dpll_usb_ck: dpll_usb_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};

2
arch/arm/boot/dts/exynos3250.dtsi
View File

@ -18,6 +18,7 @@
*/
#include "skeleton.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos3250.h>
/ {
@ -193,6 +194,7 @@
interrupts = <0 216 0>;
clocks = <&cmu CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
status = "disabled";
};

52
arch/arm/boot/dts/exynos4-cpu-thermal.dtsi Normal file
View File

@ -0,0 +1,52 @@
/*
* Device tree sources for Exynos4 thermal zone
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal.h>
/ {
thermal-zones {
cpu_thermal: cpu-thermal {
thermal-sensors = <&tmu 0>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu_alert0: cpu-alert-0 {
temperature = <70000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_alert1: cpu-alert-1 {
temperature = <95000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_alert2: cpu-alert-2 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu_crit0: cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
};
map1 {
trip = <&cpu_alert1>;
};
};
};
};
};

45
arch/arm/boot/dts/exynos4.dtsi
View File

@ -38,6 +38,7 @@
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
csis0 = &csis_0;
csis1 = &csis_1;
fimc0 = &fimc_0;
@ -104,6 +105,7 @@
compatible = "samsung,exynos4210-pd";
reg = <0x10023C20 0x20>;
#power-domain-cells = <0>;
power-domains = <&pd_lcd0>;
};
pd_cam: cam-power-domain@10023C00 {
@ -554,6 +556,22 @@
status = "disabled";
};
i2c_8: i2c@138E0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x138E0000 0x100>;
interrupts = <0 93 0>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
hdmi_i2c_phy: hdmiphy@38 {
compatible = "exynos4210-hdmiphy";
reg = <0x38>;
};
};
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
@ -663,6 +681,33 @@
status = "disabled";
};
tmu: tmu@100C0000 {
#include "exynos4412-tmu-sensor-conf.dtsi"
};
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
interrupts = <0 92 0>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
"mout_hdmi";
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
phy = <&hdmi_i2c_phy>;
power-domains = <&pd_tv>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
mixer: mixer@12C10000 {
compatible = "samsung,exynos4210-mixer";
interrupts = <0 91 0>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
status = "disabled";
};
ppmu_dmc0: ppmu_dmc0@106a0000 {
compatible = "samsung,exynos-ppmu";
reg = <0x106a0000 0x2000>;

19
arch/arm/boot/dts/exynos4210-trats.dts
View File

@ -426,6 +426,25 @@
status = "okay";
};
tmu@100C0000 {
status = "okay";
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 2 2>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 4 4>;
};
};
};
};
camera {
pinctrl-names = "default";
pinctrl-0 = <>;

57
arch/arm/boot/dts/exynos4210-universal_c210.dts
View File

@ -505,6 +505,63 @@
assigned-clock-rates = <0>, <160000000>;
};
};
hdmi_en: voltage-regulator-hdmi-5v {
compatible = "regulator-fixed";
regulator-name = "HDMI_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpe0 1 0>;
enable-active-high;
};
hdmi_ddc: i2c-ddc {
compatible = "i2c-gpio";
gpios = <&gpe4 2 0 &gpe4 3 0>;
i2c-gpio,delay-us = <100>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&i2c_ddc_bus>;
pinctrl-names = "default";
status = "okay";
};
mixer@12C10000 {
status = "okay";
};
hdmi@12D00000 {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
hdmi-en-supply = <&hdmi_en>;
vdd-supply = <&ldo3_reg>;
vdd_osc-supply = <&ldo4_reg>;
vdd_pll-supply = <&ldo3_reg>;
ddc = <&hdmi_ddc>;
status = "okay";
};
i2c@138E0000 {
status = "okay";
};
};
&pinctrl_1 {
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <0>;
};
};
&pinctrl_0 {
i2c_ddc_bus: i2c-ddc-bus {
samsung,pins = "gpe4-2", "gpe4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
&mdma1 {

38
arch/arm/boot/dts/exynos4210.dtsi
View File

@ -21,6 +21,7 @@
#include "exynos4.dtsi"
#include "exynos4210-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
/ {
compatible = "samsung,exynos4210", "samsung,exynos4";
@ -35,10 +36,13 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@900 {
cpu0: cpu@900 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x900>;
cooling-min-level = <4>;
cooling-max-level = <2>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@901 {
@ -153,16 +157,38 @@
reg = <0x03860000 0x1000>;
};
tmu@100C0000 {
tmu: tmu@100C0000 {
compatible = "samsung,exynos4210-tmu";
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
samsung,tmu_gain = <15>;
samsung,tmu_reference_voltage = <7>;
status = "disabled";
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert0: cpu-alert-0 {
temperature = <85000>; /* millicelsius */
};
cpu_alert1: cpu-alert-1 {
temperature = <100000>; /* millicelsius */
};
cpu_alert2: cpu-alert-2 {
temperature = <110000>; /* millicelsius */
};
};
};
};
g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
@ -203,6 +229,14 @@
};
};
mixer: mixer@12C10000 {
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
"sclk_mixer";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
};
ppmu_lcd1: ppmu_lcd1@12240000 {
compatible = "samsung,exynos-ppmu";
reg = <0x12240000 0x2000>;

5
arch/arm/boot/dts/exynos4212.dtsi
View File

@ -26,10 +26,13 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@A00 {
cpu0: cpu@A00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@A01 {

64
arch/arm/boot/dts/exynos4412-odroid-common.dtsi
View File

@ -249,6 +249,20 @@
regulator-always-on;
};
ldo8_reg: ldo@8 {
regulator-compatible = "LDO8";
regulator-name = "VDD10_HDMI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo10_reg: ldo@10 {
regulator-compatible = "LDO10";
regulator-name = "VDDQ_MIPIHSI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo11_reg: LDO11 {
regulator-name = "VDD18_ABB1_1.8V";
regulator-min-microvolt = <1800000>;
@ -411,6 +425,51 @@
ehci: ehci@12580000 {
status = "okay";
};
tmu@100C0000 {
vtmu-supply = <&ldo10_reg>;
status = "okay";
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>;
};
};
};
};
mixer: mixer@12C10000 {
status = "okay";
};
hdmi@12D00000 {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
ddc = <&hdmi_ddc>;
status = "okay";
};
hdmi_ddc: i2c@13880000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
};
i2c@138E0000 {
status = "okay";
};
};
&pinctrl_1 {
@ -425,4 +484,9 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <1>;
};
};

24
arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi Normal file
View File

@ -0,0 +1,24 @@
/*
* Device tree sources for Exynos4412 TMU sensor configuration
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <8>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <55>;
samsung,tmu_min_efuse_value = <40>;
samsung,tmu_max_efuse_value = <100>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <85>;
samsung,tmu_default_temp_offset = <50>;
samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;

15
arch/arm/boot/dts/exynos4412-trats2.dts
View File

@ -927,6 +927,21 @@
pulldown-ohm = <100000>; /* 100K */
io-channels = <&adc 2>; /* Battery temperature */
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>;
};
};
};
};
};
&pmu_system_controller {

5
arch/arm/boot/dts/exynos4412.dtsi
View File

@ -26,10 +26,13 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@A00 {
cpu0: cpu@A00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@A01 {

12
arch/arm/boot/dts/exynos4x12.dtsi
View File

@ -19,6 +19,7 @@
#include "exynos4.dtsi"
#include "exynos4x12-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
/ {
aliases {
@ -297,4 +298,15 @@
clock-names = "tmu_apbif";
status = "disabled";
};
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4212-hdmi";
};
mixer: mixer@12C10000 {
compatible = "samsung,exynos4212-mixer";
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
};
};

44
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -20,7 +20,7 @@
#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos-audss-clk.h>
/ {
@ -58,11 +58,14 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
cooling-min-level = <15>;
cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
@ -102,6 +105,12 @@
#power-domain-cells = <0>;
};
pd_disp1: disp1-power-domain@100440A0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440A0 0x20>;
#power-domain-cells = <0>;
};
clock: clock-controller@10010000 {
compatible = "samsung,exynos5250-clock";
reg = <0x10010000 0x30000>;
@ -235,12 +244,32 @@
status = "disabled";
};
tmu@10060000 {
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 9 9>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 15 15>;
};
};
};
};
serial@12C00000 {
@ -719,6 +748,7 @@
hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
interrupts = <0 95 0>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
@ -731,9 +761,11 @@
mixer {
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
};
dp_phy: video-phy@10040720 {
@ -743,6 +775,7 @@
};
dp: dp-controller@145B0000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
@ -750,6 +783,7 @@
};
fimd: fimd@14400000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};

35
arch/arm/boot/dts/exynos5420-trip-points.dtsi Normal file
View File

@ -0,0 +1,35 @@
/*
* Device tree sources for default Exynos5420 thermal zone definition
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu-alert-0 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-1 {
temperature = <103000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-2 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-crit-0 {
temperature = <1200000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};

33
arch/arm/boot/dts/exynos5420.dtsi
View File

@ -740,8 +740,9 @@
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
power-domains = <&disp_pd>;
};
@ -782,6 +783,7 @@
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu1: tmu@10064000 {
@ -790,6 +792,7 @@
interrupts = <0 183 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu2: tmu@10068000 {
@ -798,6 +801,7 @@
interrupts = <0 184 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu3: tmu@1006c000 {
@ -806,6 +810,7 @@
interrupts = <0 185 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_gpu: tmu@100a0000 {
@ -814,6 +819,30 @@
interrupts = <0 215 0>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0>;
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1>;
#include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2>;
#include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3>;
#include "exynos5420-trip-points.dtsi"
};
gpu_thermal: gpu-thermal {
thermal-sensors = <&tmu_gpu>;
#include "exynos5420-trip-points.dtsi"
};
};
watchdog: watchdog@101D0000 {

24
arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi Normal file
View File

@ -0,0 +1,24 @@
/*
* Device tree sources for Exynos5440 TMU sensor configuration
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <5>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <0x5d2d>;
samsung,tmu_min_efuse_value = <16>;
samsung,tmu_max_efuse_value = <76>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <70>;
samsung,tmu_default_temp_offset = <25>;
samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;

25
arch/arm/boot/dts/exynos5440-trip-points.dtsi Normal file
View File

@ -0,0 +1,25 @@
/*
* Device tree sources for default Exynos5440 thermal zone definition
*
* Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu-alert-0 {
temperature = <100000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "active";
};
cpu-crit-0 {
temperature = <1050000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};

18
arch/arm/boot/dts/exynos5440.dtsi
View File

@ -219,6 +219,7 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_1: tmuctrl@16011C {
@ -227,6 +228,7 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_2: tmuctrl@160120 {
@ -235,6 +237,22 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmuctrl_0>;
#include "exynos5440-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmuctrl_1>;
#include "exynos5440-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmuctrl_2>;
#include "exynos5440-trip-points.dtsi"
};
};
sata@210000 {

2
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View File

@ -35,6 +35,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_usb_h1_vbus: regulator@1 {
@ -45,6 +46,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 29 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_audio: regulator@2 {

2
arch/arm/boot/dts/imx6sl-evk.dts
View File

@ -52,6 +52,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 0 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_usb_otg2_vbus: regulator@1 {
@ -62,6 +63,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 2 0>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
reg_aud3v: regulator@2 {

2
arch/arm/boot/dts/omap5-core-thermal.dtsi
View File

@ -13,7 +13,7 @@
core_thermal: core_thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&bandgap 2>;

2
arch/arm/boot/dts/omap5-gpu-thermal.dtsi
View File

@ -13,7 +13,7 @@
gpu_thermal: gpu_thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&bandgap 1>;

4
arch/arm/boot/dts/omap5.dtsi
View File

@ -1079,4 +1079,8 @@
};
};
&cpu_thermal {
polling-delay = <500>; /* milliseconds */
};
/include/ "omap54xx-clocks.dtsi"

41
arch/arm/boot/dts/omap54xx-clocks.dtsi
View File

@ -167,10 +167,18 @@
ti,index-starts-at-one;
};
dpll_core_byp_mux: dpll_core_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
};
dpll_core_ck: dpll_core_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
@ -294,10 +302,18 @@
clock-div = <1>;
};
dpll_iva_byp_mux: dpll_iva_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
};
dpll_iva_ck: dpll_iva_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
};
@ -599,10 +615,19 @@
};
};
&cm_core_clocks {
dpll_per_byp_mux: dpll_per_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
};
dpll_per_ck: dpll_per_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
@ -714,10 +739,18 @@
ti,index-starts-at-one;
};
dpll_usb_byp_mux: dpll_usb_byp_mux {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
};
dpll_usb_ck: dpll_usb_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};

3
arch/arm/boot/dts/sama5d3.dtsi
View File

@ -1248,7 +1248,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1416,7 +1415,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};

9
arch/arm/boot/dts/sama5d4.dtsi
View File

@ -66,6 +66,7 @@
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c2 = &i2c2;
};
cpus {
@ -259,7 +260,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
@ -461,8 +462,8 @@
lcdck: lcdck {
#clock-cells = <0>;
reg = <4>;
clocks = <&smd>;
reg = <3>;
clocks = <&mck>;
};
smdck: smdck {
@ -770,7 +771,7 @@
reg = <50>;
};
lcd_clk: lcd_clk {
lcdc_clk: lcdc_clk {
#clock-cells = <0>;
reg = <51>;
};

6
arch/arm/boot/dts/socfpga.dtsi
View File

@ -713,6 +713,9 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
dmas = <&pdma 28>,
<&pdma 29>;
dma-names = "tx", "rx";
};
uart1: serial1@ffc03000 {
@ -722,6 +725,9 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
dmas = <&pdma 30>,
<&pdma 31>;
dma-names = "tx", "rx";
};
rst: rstmgr@ffd05000 {

1
arch/arm/configs/at91_dt_defconfig
View File

@ -70,6 +70,7 @@ CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_DM9000=y

2
arch/arm/configs/multi_v7_defconfig
View File

@ -99,7 +99,7 @@ CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_PCIEPORTBUS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
CONFIG_CMA=y
CONFIG_ARM_APPENDED_DTB=y

1
arch/arm/configs/omap2plus_defconfig
View File

@ -377,6 +377,7 @@ CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_OMAP_USB2=m
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set

2
arch/arm/configs/sama5_defconfig
View File

@ -3,8 +3,6 @@
CONFIG_SYSVIPC=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y

1
arch/arm/configs/sunxi_defconfig
View File

@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_PERF_EVENTS=y
CONFIG_ARCH_SUNXI=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y

2
arch/arm/configs/vexpress_defconfig
View File

@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_ISP1760=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y

5
arch/arm/include/debug/at91.S
View File

@ -18,8 +18,11 @@
#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
#endif
/* Keep in sync with mach-at91/include/mach/hardware.h */
#ifdef CONFIG_MMU
#define AT91_IO_P2V(x) ((x) - 0x01000000)
#else
#define AT91_IO_P2V(x) (x)
#endif
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */

22
arch/arm/mach-at91/pm.c
View File

@ -270,37 +270,35 @@ static void __init at91_pm_sram_init(void)
phys_addr_t sram_pbase;
unsigned long sram_base;
struct device_node *node;
struct platform_device *pdev;
struct platform_device *pdev = NULL;
node = of_find_compatible_node(NULL, NULL, "mmio-sram");
if (!node) {
pr_warn("%s: failed to find sram node!\n", __func__);
return;
for_each_compatible_node(node, NULL, "mmio-sram") {
pdev = of_find_device_by_node(node);
if (pdev) {
of_node_put(node);
break;
}
}
pdev = of_find_device_by_node(node);
if (!pdev) {
pr_warn("%s: failed to find sram device!\n", __func__);
goto put_node;
return;
}
sram_pool = dev_get_gen_pool(&pdev->dev);
if (!sram_pool) {
pr_warn("%s: sram pool unavailable!\n", __func__);
goto put_node;
return;
}
sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
if (!sram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
goto put_node;
return;
}
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
put_node:
of_node_put(node);
}
#endif

2
arch/arm/mach-at91/pm.h
View File

@ -44,7 +44,7 @@ static inline void at91rm9200_standby(void)
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
"r" (1), "r" (AT91RM9200_SDRAMC_SRR),
"r" (lpr));
}

80
arch/arm/mach-at91/pm_slowclock.S
View File

@ -25,11 +25,6 @@
*/
#undef SLOWDOWN_MASTER_CLOCK
#define MCKRDY_TIMEOUT 1000
#define MOSCRDY_TIMEOUT 1000
#define PLLALOCK_TIMEOUT 1000
#define PLLBLOCK_TIMEOUT 1000
pmc .req r0
sdramc .req r1
ramc1 .req r2
@ -41,60 +36,42 @@ tmp2 .req r5
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
mov tmp2, #MCKRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MCKRDY
beq 1b
2:
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
mov tmp2, #MOSCRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCS
beq 1b
2:
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
mov tmp2, #PLLALOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
2:
.endm
/*
* Wait until PLLB has locked.
*/
.macro wait_pllblock
mov tmp2, #PLLBLOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKB
beq 1b
2:
.endm
.text
.arm
/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
* void __iomem *ramc1, int memctrl)
*/
@ -134,6 +111,16 @@ ddr_sr_enable:
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_sr_enable
/* LPDDR1 --> force DDR2 mode during self-refresh */
ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR]
str tmp1, .saved_sam9_mdr
bic tmp1, tmp1, #~AT91_DDRSDRC_MD
cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
biceq tmp1, tmp1, #AT91_DDRSDRC_MD
orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
streq tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* prepare for DDRAM self-refresh mode */
ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
str tmp1, .saved_sam9_lpr
@ -142,14 +129,26 @@ ddr_sr_enable:
/* figure out if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
strne tmp2, .saved_sam9_lpr1
bicne tmp2, #AT91_DDRSDRC_LPCB
orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
beq ddr_no_2nd_ctrl
ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR]
str tmp2, .saved_sam9_mdr1
bic tmp2, tmp2, #~AT91_DDRSDRC_MD
cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
biceq tmp2, tmp2, #AT91_DDRSDRC_MD
orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
streq tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR]
str tmp2, .saved_sam9_lpr1
bic tmp2, #AT91_DDRSDRC_LPCB
orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* Enable DDRAM self-refresh mode */
str tmp2, [ramc1, #AT91_DDRSDRC_LPR]
ddr_no_2nd_ctrl:
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
b sdr_sr_done
@ -208,6 +207,7 @@ sdr_sr_done:
/* Turn off the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait for interrupt */
@ -216,6 +216,7 @@ sdr_sr_done:
/* Turn on the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
@ -280,12 +281,17 @@ sdr_sr_done:
*/
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_en_restore
/* Restore MDR in case of LPDDR1 */
ldr tmp1, .saved_sam9_mdr
str tmp1, [sdramc, #AT91_DDRSDRC_MDR]
/* Restore LPR on AT91 with DDRAM */
ldr tmp1, .saved_sam9_lpr
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
/* if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, .saved_sam9_mdr1
strne tmp2, [ramc1, #AT91_DDRSDRC_MDR]
ldrne tmp2, .saved_sam9_lpr1
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
@ -319,5 +325,11 @@ ram_restored:
.saved_sam9_lpr1:
.word 0
.saved_sam9_mdr:
.word 0
.saved_sam9_mdr1:
.word 0
ENTRY(at91_slow_clock_sz)
.word .-at91_slow_clock

3
arch/arm/mach-exynos/platsmp.c
View File

@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
*/
void exynos_cpu_power_down(int cpu)
{
if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") ||
of_machine_is_compatible("samsung,exynos5800"))) {
if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
/*
* Bypass power down for CPU0 during suspend. Check for
* the SYS_PWR_REG value to decide if we are suspending

28
arch/arm/mach-exynos/pm_domains.c
View File

@ -161,6 +161,34 @@ no_clk:
of_genpd_add_provider_simple(np, &pd->pd);
}
/* Assign the child power domains to their parents */
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct generic_pm_domain *child_domain, *parent_domain;
struct of_phandle_args args;
args.np = np;
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
if (!child_domain)
continue;
if (of_parse_phandle_with_args(np, "power-domains",
"#power-domain-cells", 0, &args) != 0)
continue;
parent_domain = of_genpd_get_from_provider(&args);
if (!parent_domain)
continue;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
pr_warn("%s failed to add subdomain: %s\n",
parent_domain->name, child_domain->name);
else
pr_info("%s has as child subdomain: %s.\n",
parent_domain->name, child_domain->name);
of_node_put(np);
}
return 0;
}
arch_initcall(exynos4_pm_init_power_domain);

4
arch/arm/mach-exynos/suspend.c
View File

@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3;
static u32 exynos_irqwake_intmask = 0xffffffff;
static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
{ 73, BIT(1) }, /* RTC alarm */
{ 74, BIT(2) }, /* RTC tick */
{ 105, BIT(1) }, /* RTC alarm */
{ 106, BIT(2) }, /* RTC tick */
{ /* sentinel */ },
};

5
arch/arm/mach-imx/mach-imx6q.c
View File

@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void)
* set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad
* (external OSC), and we need to clear the bit.
*/
clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
IMX6Q_GPR1_ENET_CLK_SEL_PAD;
clksel = clk_is_match(ptp_clk, enet_ref) ?
IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
IMX6Q_GPR1_ENET_CLK_SEL_PAD;
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (!IS_ERR(gpr))
regmap_update_bits(gpr, IOMUXC_GPR1,

10
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -1692,16 +1692,15 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
if (ret == -EBUSY)
pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
if (!ret) {
if (oh->clkdm) {
/*
* Set the clockdomain to HW_AUTO, assuming that the
* previous state was HW_AUTO.
*/
if (oh->clkdm && hwsup)
if (hwsup)
clkdm_allow_idle(oh->clkdm);
} else {
if (oh->clkdm)
clkdm_hwmod_disable(oh->clkdm, oh);
clkdm_hwmod_disable(oh->clkdm, oh);
}
return ret;
@ -2698,6 +2697,7 @@ static int __init _register(struct omap_hwmod *oh)
INIT_LIST_HEAD(&oh->master_ports);
INIT_LIST_HEAD(&oh->slave_ports);
spin_lock_init(&oh->_lock);
lockdep_set_class(&oh->_lock, &oh->hwmod_key);
oh->_state = _HWMOD_STATE_REGISTERED;

1
arch/arm/mach-omap2/omap_hwmod.h
View File

@ -674,6 +674,7 @@ struct omap_hwmod {
u32 _sysc_cache;
void __iomem *_mpu_rt_va;
spinlock_t _lock;
struct lock_class_key hwmod_key; /* unique lock class */
struct list_head node;
struct omap_hwmod_ocp_if *_mpu_port;
unsigned int (*xlate_irq)(unsigned int);

103
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View File

@ -1466,53 +1466,16 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
*
*/
static struct omap_hwmod_class dra7xx_pcie_hwmod_class = {
static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
.name = "pcie",
};
/* pcie1 */
static struct omap_hwmod dra7xx_pcie1_hwmod = {
static struct omap_hwmod dra7xx_pciess1_hwmod = {
.name = "pcie1",
.class = &dra7xx_pcie_hwmod_class,
.class = &dra7xx_pciess_hwmod_class,
.clkdm_name = "pcie_clkdm",
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/* pcie2 */
static struct omap_hwmod dra7xx_pcie2_hwmod = {
.name = "pcie2",
.class = &dra7xx_pcie_hwmod_class,
.clkdm_name = "pcie_clkdm",
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* 'PCIE PHY' class
*
*/
static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = {
.name = "pcie-phy",
};
/* pcie1 phy */
static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
.name = "pcie1-phy",
.class = &dra7xx_pcie_phy_hwmod_class,
.clkdm_name = "l3init_clkdm",
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
@ -1522,11 +1485,11 @@ static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
},
};
/* pcie2 phy */
static struct omap_hwmod dra7xx_pcie2_phy_hwmod = {
.name = "pcie2-phy",
.class = &dra7xx_pcie_phy_hwmod_class,
.clkdm_name = "l3init_clkdm",
/* pcie2 */
static struct omap_hwmod dra7xx_pciess2_hwmod = {
.name = "pcie2",
.class = &dra7xx_pciess_hwmod_class,
.clkdm_name = "pcie_clkdm",
.main_clk = "l4_root_clk_div",
.prcm = {
.omap4 = {
@ -2877,50 +2840,34 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> pcie1 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = {
/* l3_main_1 -> pciess1 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_pcie1_hwmod,
.slave = &dra7xx_pciess1_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> pcie1 */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = {
/* l4_cfg -> pciess1 */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_pcie1_hwmod,
.slave = &dra7xx_pciess1_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> pcie2 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = {
/* l3_main_1 -> pciess2 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_pcie2_hwmod,
.slave = &dra7xx_pciess2_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> pcie2 */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = {
/* l4_cfg -> pciess2 */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_pcie2_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> pcie1 phy */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_pcie1_phy_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> pcie2 phy */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_pcie2_phy_hwmod,
.slave = &dra7xx_pciess2_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -3327,12 +3274,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_cfg__mpu,
&dra7xx_l4_cfg__ocp2scp1,
&dra7xx_l4_cfg__ocp2scp3,
&dra7xx_l3_main_1__pcie1,
&dra7xx_l4_cfg__pcie1,
&dra7xx_l3_main_1__pcie2,
&dra7xx_l4_cfg__pcie2,
&dra7xx_l4_cfg__pcie1_phy,
&dra7xx_l4_cfg__pcie2_phy,
&dra7xx_l3_main_1__pciess1,
&dra7xx_l4_cfg__pciess1,
&dra7xx_l3_main_1__pciess2,
&dra7xx_l4_cfg__pciess2,
&dra7xx_l3_main_1__qspi,
&dra7xx_l4_per3__rtcss,
&dra7xx_l4_cfg__sata,

1
arch/arm/mach-omap2/pdata-quirks.c
View File

@ -173,6 +173,7 @@ static void __init omap3_igep0030_rev_g_legacy_init(void)
static void __init omap3_evm_legacy_init(void)
{
hsmmc2_internal_input_clk();
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
}

4
arch/arm/mach-omap2/prm44xx.c
View File

@ -252,10 +252,10 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
{
saved_mask[0] =
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
OMAP4_PRM_IRQENABLE_MPU_OFFSET);
saved_mask[1] =
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
OMAP4_PRM_IRQENABLE_MPU_OFFSET);

1
arch/arm/mach-pxa/idp.c
View File

@ -36,6 +36,7 @@
#include <linux/platform_data/video-pxafb.h>
#include <mach/bitfield.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/smc91x.h>
#include "generic.h"
#include "devices.h"

2
arch/arm/mach-pxa/lpd270.c
View File

@ -195,7 +195,7 @@ static struct resource smc91x_resources[] = {
};
struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT;
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
static struct platform_device smc91x_device = {

4
arch/arm/mach-sa1100/neponset.c
View File

@ -268,8 +268,8 @@ static int neponset_probe(struct platform_device *dev)
.id = 0,
.res = smc91x_resources,
.num_res = ARRAY_SIZE(smc91x_resources),
.data = &smc91c_platdata,
.size_data = sizeof(smc91c_platdata),
.data = &smc91x_platdata,
.size_data = sizeof(smc91x_platdata),
};
int ret, irq;

2
arch/arm/mach-sa1100/pleb.c
View File

@ -54,7 +54,7 @@ static struct platform_device smc91x_device = {
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &smc91c_platdata,
.platform_data = &smc91x_platdata,
},
};

2
arch/arm/mach-socfpga/core.h
View File

@ -45,6 +45,6 @@ extern char secondary_trampoline, secondary_trampoline_end;
extern unsigned long socfpga_cpu1start_addr;
#define SOCFPGA_SCU_VIRT_BASE 0xfffec000
#define SOCFPGA_SCU_VIRT_BASE 0xfee00000
#endif

5
arch/arm/mach-socfpga/socfpga.c
View File

@ -23,6 +23,7 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/cacheflush.h>
#include "core.h"
@ -73,6 +74,10 @@ void __init socfpga_sysmgr_init(void)
(u32 *) &socfpga_cpu1start_addr))
pr_err("SMP: Need cpu1-start-addr in device tree.\n");
/* Ensure that socfpga_cpu1start_addr is visible to other CPUs */
smp_wmb();
sync_cache_w(&socfpga_cpu1start_addr);
sys_manager_base_addr = of_iomap(np, 0);
np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");

1
arch/arm/mach-sti/board-dt.c
View File

@ -18,6 +18,7 @@ static const char *stih41x_dt_match[] __initdata = {
"st,stih415",
"st,stih416",
"st,stih407",
"st,stih410",
"st,stih418",
NULL
};

4
arch/arm64/boot/dts/apm/apm-storm.dtsi
View File

@ -622,7 +622,7 @@
};
sgenet0: ethernet@1f210000 {
compatible = "apm,xgene-enet";
compatible = "apm,xgene1-sgenet";
status = "disabled";
reg = <0x0 0x1f210000 0x0 0xd100>,
<0x0 0x1f200000 0x0 0Xc300>,
@ -636,7 +636,7 @@
};
xgenet: ethernet@1f610000 {
compatible = "apm,xgene-enet";
compatible = "apm,xgene1-xgenet";
status = "disabled";
reg = <0x0 0x1f610000 0x0 0xd100>,
<0x0 0x1f600000 0x0 0Xc300>,

3
arch/arm64/include/asm/tlb.h
View File

@ -48,6 +48,7 @@ static inline void tlb_flush(struct mmu_gather *tlb)
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long addr)
{
__flush_tlb_pgtable(tlb->mm, addr);
pgtable_page_dtor(pte);
tlb_remove_entry(tlb, pte);
}
@ -56,6 +57,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
unsigned long addr)
{
__flush_tlb_pgtable(tlb->mm, addr);
tlb_remove_entry(tlb, virt_to_page(pmdp));
}
#endif
@ -64,6 +66,7 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pudp,
unsigned long addr)
{
__flush_tlb_pgtable(tlb->mm, addr);
tlb_remove_entry(tlb, virt_to_page(pudp));
}
#endif

13
arch/arm64/include/asm/tlbflush.h
View File

@ -143,6 +143,19 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end
flush_tlb_all();
}
/*
* Used to invalidate the TLB (walk caches) corresponding to intermediate page
* table levels (pgd/pud/pmd).
*/
static inline void __flush_tlb_pgtable(struct mm_struct *mm,
unsigned long uaddr)
{
unsigned long addr = uaddr >> 12 | ((unsigned long)ASID(mm) << 48);
dsb(ishst);
asm("tlbi vae1is, %0" : : "r" (addr));
dsb(ish);
}
/*
* On AArch64, the cache coherency is handled via the set_pte_at() function.
*/

9
arch/arm64/kernel/efi.c
View File

@ -354,3 +354,12 @@ void efi_virtmap_unload(void)
efi_set_pgd(current->active_mm);
preempt_enable();
}
/*
* UpdateCapsule() depends on the system being shutdown via
* ResetSystem().
*/
bool efi_poweroff_required(void)
{
return efi_enabled(EFI_RUNTIME_SERVICES);
}

2
arch/arm64/kernel/head.S
View File

@ -585,8 +585,8 @@ ENDPROC(set_cpu_boot_mode_flag)
* zeroing of .bss would clobber it.
*/
.pushsection .data..cacheline_aligned
ENTRY(__boot_cpu_mode)
.align L1_CACHE_SHIFT
ENTRY(__boot_cpu_mode)
.long BOOT_CPU_MODE_EL2
.long 0
.popsection

8
arch/arm64/kernel/process.c
View File

@ -21,6 +21,7 @@
#include <stdarg.h>
#include <linux/compat.h>
#include <linux/efi.h>
#include <linux/export.h>
#include <linux/sched.h>
#include <linux/kernel.h>
@ -150,6 +151,13 @@ void machine_restart(char *cmd)
local_irq_disable();
smp_send_stop();
/*
* UpdateCapsule() depends on the system being reset via
* ResetSystem().
*/
if (efi_enabled(EFI_RUNTIME_SERVICES))
efi_reboot(reboot_mode, NULL);
/* Now call the architecture specific reboot code. */
if (arm_pm_restart)
arm_pm_restart(reboot_mode, cmd);

5
arch/c6x/include/asm/pgtable.h
View File

@ -67,6 +67,11 @@ extern unsigned long empty_zero_page;
*/
#define pgtable_cache_init() do { } while (0)
/*
* c6x is !MMU, so define the simpliest implementation
*/
#define pgprot_writecombine pgprot_noncached
#include <asm-generic/pgtable.h>
#endif /* _ASM_C6X_PGTABLE_H */

7
arch/microblaze/kernel/entry.S
View File

@ -348,8 +348,9 @@ C_ENTRY(_user_exception):
* The LP register should point to the location where the called function
* should return. [note that MAKE_SYS_CALL uses label 1] */
/* See if the system call number is valid */
blti r12, 5f
addi r11, r12, -__NR_syscalls;
bgei r11,5f;
bgei r11, 5f;
/* Figure out which function to use for this system call. */
/* Note Microblaze barrel shift is optional, so don't rely on it */
add r12, r12, r12; /* convert num -> ptr */
@ -375,7 +376,7 @@ C_ENTRY(_user_exception):
/* The syscall number is invalid, return an error. */
5:
rtsd r15, 8; /* looks like a normal subroutine return */
braid ret_from_trap
addi r3, r0, -ENOSYS;
/* Entry point used to return from a syscall/trap */
@ -411,7 +412,7 @@ C_ENTRY(ret_from_trap):
bri 1b
/* Maybe handle a signal */
5:
5:
andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME;
beqi r11, 4f; /* Signals to handle, handle them */

47
arch/nios2/include/asm/ptrace.h
View File

@ -15,7 +15,54 @@
#include <uapi/asm/ptrace.h>
/* This struct defines the way the registers are stored on the
stack during a system call. */
#ifndef __ASSEMBLY__
struct pt_regs {
unsigned long r8; /* r8-r15 Caller-saved GP registers */
unsigned long r9;
unsigned long r10;
unsigned long r11;
unsigned long r12;
unsigned long r13;
unsigned long r14;
unsigned long r15;
unsigned long r1; /* Assembler temporary */
unsigned long r2; /* Retval LS 32bits */
unsigned long r3; /* Retval MS 32bits */
unsigned long r4; /* r4-r7 Register arguments */
unsigned long r5;
unsigned long r6;
unsigned long r7;
unsigned long orig_r2; /* Copy of r2 ?? */
unsigned long ra; /* Return address */
unsigned long fp; /* Frame pointer */
unsigned long sp; /* Stack pointer */
unsigned long gp; /* Global pointer */
unsigned long estatus;
unsigned long ea; /* Exception return address (pc) */
unsigned long orig_r7;
};
/*
* This is the extended stack used by signal handlers and the context
* switcher: it's pushed after the normal "struct pt_regs".
*/
struct switch_stack {
unsigned long r16; /* r16-r23 Callee-saved GP registers */
unsigned long r17;
unsigned long r18;
unsigned long r19;
unsigned long r20;
unsigned long r21;
unsigned long r22;
unsigned long r23;
unsigned long fp;
unsigned long gp;
unsigned long ra;
};
#define user_mode(regs) (((regs)->estatus & ESTATUS_EU))
#define instruction_pointer(regs) ((regs)->ra)

32
arch/nios2/include/asm/ucontext.h
View File

@ -1,32 +0,0 @@
/*
* Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
* Copyright (C) 2004 Microtronix Datacom Ltd
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_NIOS2_UCONTEXT_H
#define _ASM_NIOS2_UCONTEXT_H
typedef int greg_t;
#define NGREG 32
typedef greg_t gregset_t[NGREG];
struct mcontext {
int version;
gregset_t gregs;
};
#define MCONTEXT_VERSION 2
struct ucontext {
unsigned long uc_flags;
struct ucontext *uc_link;
stack_t uc_stack;
struct mcontext uc_mcontext;
sigset_t uc_sigmask; /* mask last for extensibility */
};
#endif

2
arch/nios2/include/uapi/asm/Kbuild
View File

@ -2,3 +2,5 @@ include include/uapi/asm-generic/Kbuild.asm
header-y += elf.h
header-y += ucontext.h
generic-y += ucontext.h

4
arch/nios2/include/uapi/asm/elf.h
View File

@ -50,9 +50,7 @@
typedef unsigned long elf_greg_t;
#define ELF_NGREG \
((sizeof(struct pt_regs) + sizeof(struct switch_stack)) / \
sizeof(elf_greg_t))
#define ELF_NGREG 49
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef unsigned long elf_fpregset_t;

50
arch/nios2/include/uapi/asm/ptrace.h
View File

@ -67,53 +67,9 @@
#define NUM_PTRACE_REG (PTR_TLBMISC + 1)
/* this struct defines the way the registers are stored on the
stack during a system call.
There is a fake_regs in setup.c that has to match pt_regs.*/
struct pt_regs {
unsigned long r8; /* r8-r15 Caller-saved GP registers */
unsigned long r9;
unsigned long r10;
unsigned long r11;
unsigned long r12;
unsigned long r13;
unsigned long r14;
unsigned long r15;
unsigned long r1; /* Assembler temporary */
unsigned long r2; /* Retval LS 32bits */
unsigned long r3; /* Retval MS 32bits */
unsigned long r4; /* r4-r7 Register arguments */
unsigned long r5;
unsigned long r6;
unsigned long r7;
unsigned long orig_r2; /* Copy of r2 ?? */
unsigned long ra; /* Return address */
unsigned long fp; /* Frame pointer */
unsigned long sp; /* Stack pointer */
unsigned long gp; /* Global pointer */
unsigned long estatus;
unsigned long ea; /* Exception return address (pc) */
unsigned long orig_r7;
};
/*
* This is the extended stack used by signal handlers and the context
* switcher: it's pushed after the normal "struct pt_regs".
*/
struct switch_stack {
unsigned long r16; /* r16-r23 Callee-saved GP registers */
unsigned long r17;
unsigned long r18;
unsigned long r19;
unsigned long r20;
unsigned long r21;
unsigned long r22;
unsigned long r23;
unsigned long fp;
unsigned long gp;
unsigned long ra;
/* User structures for general purpose registers. */
struct user_pt_regs {
__u32 regs[49];
};
#endif /* __ASSEMBLY__ */

12
arch/nios2/include/uapi/asm/sigcontext.h
View File

@ -15,14 +15,16 @@
* details.
*/
#ifndef _ASM_NIOS2_SIGCONTEXT_H
#define _ASM_NIOS2_SIGCONTEXT_H
#ifndef _UAPI__ASM_SIGCONTEXT_H
#define _UAPI__ASM_SIGCONTEXT_H
#include <asm/ptrace.h>
#include <linux/types.h>
#define MCONTEXT_VERSION 2
struct sigcontext {
struct pt_regs regs;
unsigned long sc_mask; /* old sigmask */
int version;
unsigned long gregs[32];
};
#endif

4
arch/nios2/kernel/signal.c
View File

@ -39,7 +39,7 @@ static inline int rt_restore_ucontext(struct pt_regs *regs,
struct ucontext *uc, int *pr2)
{
int temp;
greg_t *gregs = uc->uc_mcontext.gregs;
unsigned long *gregs = uc->uc_mcontext.gregs;
int err;
/* Always make any pending restarted system calls return -EINTR */
@ -127,7 +127,7 @@ badframe:
static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
{
struct switch_stack *sw = (struct switch_stack *)regs - 1;
greg_t *gregs = uc->uc_mcontext.gregs;
unsigned long *gregs = uc->uc_mcontext.gregs;
int err = 0;
err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);

12
arch/s390/include/asm/kvm_host.h
View File

@ -515,15 +515,15 @@ struct s390_io_adapter {
#define S390_ARCH_FAC_MASK_SIZE_U64 \
(S390_ARCH_FAC_MASK_SIZE_BYTE / sizeof(u64))
struct s390_model_fac {
/* facilities used in SIE context */
__u64 sie[S390_ARCH_FAC_LIST_SIZE_U64];
/* subset enabled by kvm */
__u64 kvm[S390_ARCH_FAC_LIST_SIZE_U64];
struct kvm_s390_fac {
/* facility list requested by guest */
__u64 list[S390_ARCH_FAC_LIST_SIZE_U64];
/* facility mask supported by kvm & hosting machine */
__u64 mask[S390_ARCH_FAC_LIST_SIZE_U64];
};
struct kvm_s390_cpu_model {
struct s390_model_fac *fac;
struct kvm_s390_fac *fac;
struct cpuid cpu_id;
unsigned short ibc;
};

2
arch/s390/include/asm/mmu_context.h
View File

@ -62,6 +62,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
{
int cpu = smp_processor_id();
S390_lowcore.user_asce = next->context.asce_bits | __pa(next->pgd);
if (prev == next)
return;
if (MACHINE_HAS_TLB_LC)
@ -73,7 +74,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
atomic_dec(&prev->context.attach_count);
if (MACHINE_HAS_TLB_LC)
cpumask_clear_cpu(cpu, &prev->context.cpu_attach_mask);
S390_lowcore.user_asce = next->context.asce_bits | __pa(next->pgd);
}
#define finish_arch_post_lock_switch finish_arch_post_lock_switch

11
arch/s390/include/asm/page.h
View File

@ -37,16 +37,7 @@ static inline void storage_key_init_range(unsigned long start, unsigned long end
#endif
}
static inline void clear_page(void *page)
{
register unsigned long reg1 asm ("1") = 0;
register void *reg2 asm ("2") = page;
register unsigned long reg3 asm ("3") = 4096;
asm volatile(
" mvcl 2,0"
: "+d" (reg2), "+d" (reg3) : "d" (reg1)
: "memory", "cc");
}
#define clear_page(page) memset((page), 0, PAGE_SIZE)
/*
* copy_page uses the mvcl instruction with 0xb0 padding byte in order to

12
arch/s390/kernel/jump_label.c
View File

@ -36,16 +36,20 @@ static void jump_label_make_branch(struct jump_entry *entry, struct insn *insn)
insn->offset = (entry->target - entry->code) >> 1;
}
static void jump_label_bug(struct jump_entry *entry, struct insn *insn)
static void jump_label_bug(struct jump_entry *entry, struct insn *expected,
struct insn *new)
{
unsigned char *ipc = (unsigned char *)entry->code;
unsigned char *ipe = (unsigned char *)insn;
unsigned char *ipe = (unsigned char *)expected;
unsigned char *ipn = (unsigned char *)new;
pr_emerg("Jump label code mismatch at %pS [%p]\n", ipc, ipc);
pr_emerg("Found: %02x %02x %02x %02x %02x %02x\n",
ipc[0], ipc[1], ipc[2], ipc[3], ipc[4], ipc[5]);
pr_emerg("Expected: %02x %02x %02x %02x %02x %02x\n",
ipe[0], ipe[1], ipe[2], ipe[3], ipe[4], ipe[5]);
pr_emerg("New: %02x %02x %02x %02x %02x %02x\n",
ipn[0], ipn[1], ipn[2], ipn[3], ipn[4], ipn[5]);
panic("Corrupted kernel text");
}
@ -69,10 +73,10 @@ static void __jump_label_transform(struct jump_entry *entry,
}
if (init) {
if (memcmp((void *)entry->code, &orignop, sizeof(orignop)))
jump_label_bug(entry, &old);
jump_label_bug(entry, &orignop, &new);
} else {
if (memcmp((void *)entry->code, &old, sizeof(old)))
jump_label_bug(entry, &old);
jump_label_bug(entry, &old, &new);
}
probe_kernel_write((void *)entry->code, &new, sizeof(new));
}

1
arch/s390/kernel/module.c
View File

@ -436,6 +436,7 @@ int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
{
jump_label_apply_nops(me);
vfree(me->arch.syminfo);
me->arch.syminfo = NULL;
return 0;

2
arch/s390/kernel/processor.c
View File

@ -18,7 +18,7 @@
static DEFINE_PER_CPU(struct cpuid, cpu_id);
void cpu_relax(void)
void notrace cpu_relax(void)
{
if (!smp_cpu_mtid && MACHINE_HAS_DIAG44)
asm volatile("diag 0,0,0x44");

Some files were not shown because too many files have changed in this diff Show More