iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

usb: cdns3: host: fix endless superspeed hub port reset

Browse Source 
When usb 3.0 hub connect with one USB 2.0 device and NO USB 3.0 device,
some usb hub reports endless port reset message.

[  190.324169] usb 2-1: new SuperSpeed USB device number 88 using xhci-hcd
[  190.352834] hub 2-1:1.0: USB hub found
[  190.356995] hub 2-1:1.0: 4 ports detected
[  190.700056] usb 2-1: USB disconnect, device number 88
[  192.472139] usb 2-1: new SuperSpeed USB device number 89 using xhci-hcd
[  192.500820] hub 2-1:1.0: USB hub found
[  192.504977] hub 2-1:1.0: 4 ports detected
[  192.852066] usb 2-1: USB disconnect, device number 89

The reason is the runtime pm state of USB2.0 port is active and
USB 3.0 port is suspend, so parent device is active state.

 cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/usb2/power/runtime_status

 suspended

 cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/usb1/power/runtime_status

 active

 cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/power/runtime_status

 active

 cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/power/runtime_status

 active

So xhci_cdns3_suspend_quirk() have not called. U3 configure is not applied.

move U3 configure into host start. Reinit again in resume function in case
controller power lost during suspend.

Cc: stable@vger.kernel.org 5.10
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20221026190749.2280367-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Li Jun
2022-10-26 15:07:49 -04:00
committed by Greg Kroah-Hartman
parent 7a58b8d602
commit 9d5333c931
1 changed files with 28 additions and 28 deletions
Download Patch File Download Diff File Expand all files Collapse all files

56
drivers/usb/cdns3/host.c
View File

@ -24,11 +24,37 @@
#define CFG_RXDET_P3_EN BIT(15) #define CFG_RXDET_P3_EN BIT(15)
#define LPM_2_STB_SWITCH_EN BIT(25) #define LPM_2_STB_SWITCH_EN BIT(25)
static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd); static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 value;
/* set usbcmd.EU3S */
value = readl(&xhci->op_regs->command);
value |= CMD_PM_INDEX;
writel(value, &xhci->op_regs->command);
if (hcd->regs) {
value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
value |= CFG_RXDET_P3_EN;
writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
value = readl(hcd->regs + XECP_PORT_CAP_REG);
value |= LPM_2_STB_SWITCH_EN;
writel(value, hcd->regs + XECP_PORT_CAP_REG);
}
}
static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
{
xhci_cdns3_plat_start(hcd);
return 0;
}
static const struct xhci_plat_priv xhci_plat_cdns3_xhci = { static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
.quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI, .quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
.suspend_quirk = xhci_cdns3_suspend_quirk, .plat_start = xhci_cdns3_plat_start,
.resume_quirk = xhci_cdns3_resume_quirk,
}; };
static int __cdns_host_init(struct cdns *cdns) static int __cdns_host_init(struct cdns *cdns)
@ -90,32 +116,6 @@ err1:
return ret; return ret;
} }
static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 value;
if (pm_runtime_status_suspended(hcd->self.controller))
return 0;
/* set usbcmd.EU3S */
value = readl(&xhci->op_regs->command);
value |= CMD_PM_INDEX;
writel(value, &xhci->op_regs->command);
if (hcd->regs) {
value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
value |= CFG_RXDET_P3_EN;
writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
value = readl(hcd->regs + XECP_PORT_CAP_REG);
value |= LPM_2_STB_SWITCH_EN;
writel(value, hcd->regs + XECP_PORT_CAP_REG);
}
return 0;
}
static void cdns_host_exit(struct cdns *cdns) static void cdns_host_exit(struct cdns *cdns)
{ {
kfree(cdns->xhci_plat_data); kfree(cdns->xhci_plat_data);