arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform)
Add support for following boards: - Xperia X Performance (dora) - Xperia XZ (kagura) - Xperia XZs (keyaki) They are all based on the SONY Tone platform and feature largely similar hardware with the most obvious differences being lack of USB-C and ToF sensor on Dora and different camera sensor on Keyaki. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210608202143.247427-4-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
AngeloGioacchino Del Regno
Bjorn Andersson
parent
08972f34a2
commit
9da65e441d
@ -27,6 +27,12 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-dora.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-kagura.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
|
||||
|
||||
@ -0,0 +1,11 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
#include "msm8996-sony-xperia-tone-dora.dts"
|
||||
#include "pmi8996.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia X Performance (PMI8996)";
|
||||
};
|
||||
@ -0,0 +1,11 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
#include "msm8996-sony-xperia-tone-kagura.dts"
|
||||
#include "pmi8996.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia XZ (PMI8996)";
|
||||
};
|
||||
@ -0,0 +1,11 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
#include "msm8996-sony-xperia-tone-keyaki.dts"
|
||||
#include "pmi8996.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia XZs (PMI8996)";
|
||||
};
|
||||
27
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts
Normal file
27
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts
Normal file
@ -0,0 +1,27 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8996-sony-xperia-tone.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia X Performance";
|
||||
compatible = "sony,dora-row", "qcom,msm8996";
|
||||
};
|
||||
|
||||
/delete-node/ &tof_sensor;
|
||||
/delete-node/ &pm8994_l11;
|
||||
/delete-node/ &pm8994_l14;
|
||||
|
||||
&usb_detect {
|
||||
pins = "gpio24";
|
||||
};
|
||||
|
||||
&usb3_id {
|
||||
id-gpio = <&tlmm 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
15
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts
Normal file
15
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts
Normal file
@ -0,0 +1,15 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8996-sony-xperia-tone.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia XZ";
|
||||
compatible = "sony,kagura-row", "qcom,msm8996";
|
||||
};
|
||||
26
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts
Normal file
26
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts
Normal file
@ -0,0 +1,26 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8996-sony-xperia-tone.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia XZs";
|
||||
compatible = "sony,keyaki-row", "qcom,msm8996";
|
||||
};
|
||||
|
||||
&pm8994_l19 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
|
||||
&pm8994_l30 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-pull-down;
|
||||
};
|
||||
956
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
Normal file
956
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
Normal file
@ -0,0 +1,956 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
#include "msm8996.dtsi"
|
||||
#include "pm8994.dtsi"
|
||||
#include "pmi8994.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||||
|
||||
/delete-node/ &slpi_region;
|
||||
/delete-node/ &venus_region;
|
||||
/delete-node/ &zap_shader_region;
|
||||
|
||||
/ {
|
||||
qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */
|
||||
qcom,pmic-id = <0x20009 0x2000a 0 0>; /* PM8994 + PMI8994 */
|
||||
qcom,board-id = <8 0>;
|
||||
|
||||
chosen {
|
||||
/*
|
||||
* Due to an unknown-for-a-few-years regression,
|
||||
* SDHCI only works on MSM8996 in PIO (lame) mode.
|
||||
*/
|
||||
bootargs = "sdhci.debug_quirks=0x40 sdhci.debug_quirks2=0x4 maxcpus=2";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
ramoops@a7f00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0 0xa7f00000 0 0x100000>;
|
||||
record-size = <0x20000>;
|
||||
console-size = <0x40000>;
|
||||
ftrace-size = <0x20000>;
|
||||
pmsg-size = <0x20000>;
|
||||
ecc-size = <16>;
|
||||
};
|
||||
|
||||
cont_splash_mem: memory@83401000 {
|
||||
reg = <0 0x83401000 0 0x23ff000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
zap_shader_region: gpu@90400000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x0 0x90400000 0x0 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
slpi_region: memory@90500000 {
|
||||
reg = <0 0x90500000 0 0xa00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus_region: memory@90f00000 {
|
||||
reg = <0 0x90f00000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
panel_tvdd: tvdd-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "panel_tvdd";
|
||||
gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&tp_vddio_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
usb3_id: usb3-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&tlmm 25 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_detect>;
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
wlan_en: wlan-en-1-8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "wlan-en-regulator";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl_reg_on>;
|
||||
|
||||
/* WLAN card specific delay */
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c3 {
|
||||
status = "okay";
|
||||
clock-frequency = <355000>;
|
||||
|
||||
tof_sensor: vl53l0x@29 {
|
||||
compatible = "st,vl53l0x";
|
||||
reg = <0x29>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp2_i2c5 {
|
||||
status = "okay";
|
||||
clock-frequency = <355000>;
|
||||
|
||||
/* FUSB301 USB-C controller */
|
||||
};
|
||||
|
||||
&blsp2_i2c6 {
|
||||
status = "okay";
|
||||
clock-frequency = <355000>;
|
||||
|
||||
synaptics@2c {
|
||||
compatible = "syna,rmi4-i2c";
|
||||
reg = <0x2c>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&panel_tvdd>;
|
||||
|
||||
syna,reset-delay-ms = <220>;
|
||||
syna,startup-delay-ms = <220>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rmi4-f01@1 {
|
||||
reg = <0x1>;
|
||||
syna,nosleep-mode = <1>;
|
||||
};
|
||||
|
||||
rmi4-f11@11 {
|
||||
reg = <0x11>;
|
||||
syna,sensor-type = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp2_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&camera0_mclk {
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
&camera0_pwdn {
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
&camera0_rst {
|
||||
pins = "gpio30";
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
&camera2_mclk {
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
&camera2_rst {
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
&hsusb_phy1 {
|
||||
status = "okay";
|
||||
|
||||
vdda-pll-supply = <&pm8994_l12>;
|
||||
vdda-phy-dpdm-supply = <&pm8994_l24>;
|
||||
};
|
||||
|
||||
&mmcc {
|
||||
vdd-gfx-supply = <&vdd_gfx>;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
|
||||
wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
|
||||
vddpe-3v3-supply = <&wlan_en>;
|
||||
vdda-supply = <&pm8994_l28>;
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
status = "okay";
|
||||
|
||||
vdda-phy-supply = <&pm8994_l28>;
|
||||
vdda-pll-supply = <&pm8994_l12>;
|
||||
};
|
||||
|
||||
&pm8994_gpios {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pm8994_gpios_defaults>;
|
||||
gpio-line-names =
|
||||
"NC",
|
||||
"VOL_DOWN_N",
|
||||
"VOL_UP_N",
|
||||
"SNAPSHOT_N",
|
||||
"FOCUS_N",
|
||||
"NC",
|
||||
"NFC_VEN",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"EAR_EN",
|
||||
"NC",
|
||||
"PM_DIVCLK1",
|
||||
"PMI_CLK",
|
||||
"NC",
|
||||
"WL_SLEEP_CLK",
|
||||
"NC",
|
||||
"PMIC_SPON",
|
||||
"UIM_BATT_ALARM",
|
||||
"PMK_SLEEP_CLK";
|
||||
|
||||
/*
|
||||
* We don't yet know for sure which GPIOs are of our interest, but what
|
||||
* we do know is that if a vendor sets the pins to a non-default state, there's
|
||||
* probably a reason for it, and just to be on the safe side, we follow suit.
|
||||
*/
|
||||
pm8994_gpios_defaults: pm8994-gpios-default-state {
|
||||
pm8994-gpio1-nc {
|
||||
pins = "gpio1";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
};
|
||||
|
||||
vol-down-n {
|
||||
pins = "gpio2";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
vol-up-n {
|
||||
pins = "gpio3";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
camera-snapshot-n {
|
||||
pins = "gpio4";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
camera-focus-n {
|
||||
pins = "gpio5";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pm8994-gpio6-nc {
|
||||
pins = "gpio6";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
nfc-download {
|
||||
pins = "gpio7";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-low;
|
||||
drive-push-pull;
|
||||
bias-disable;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pm8994-gpio8-nc {
|
||||
pins = "gpio8";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-low;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
pm8994-gpio9-nc {
|
||||
pins = "gpio9";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-high;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
nfc-clock {
|
||||
pins = "gpio10";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
input-enable;
|
||||
drive-push-pull;
|
||||
bias-pull-down;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pm8994-gpio11-nc {
|
||||
pins = "gpio11";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
pm8994-gpio12-nc {
|
||||
pins = "gpio12";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
ear-enable {
|
||||
pins = "gpio13";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-high;
|
||||
drive-push-pull;
|
||||
bias-disable;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pm8994-gpio14-nc {
|
||||
pins = "gpio14";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
input-enable;
|
||||
bias-high-impedance;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
pm-divclk1-gpio {
|
||||
pins = "gpio15";
|
||||
function = "func1";
|
||||
output-high;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
pmi-clk-gpio {
|
||||
pins = "gpio16";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
};
|
||||
|
||||
pm8994-gpio17-nc {
|
||||
pins = "gpio17";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
rome-sleep {
|
||||
pins = "gpio18";
|
||||
function = PMIC_GPIO_FUNC_FUNC2;
|
||||
output-low;
|
||||
drive-push-pull;
|
||||
bias-disable;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pm8994-gpio19-nc {
|
||||
pins = "gpio19";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-low;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
pm8994-gpio22-nc {
|
||||
pins = "gpio22";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
bias-high-impedance;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pm8994_mpps {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pm8994_mpps_defaults>;
|
||||
|
||||
gpio-line-names =
|
||||
"SDC_UIM_VBIAS",
|
||||
"LCD_ID_ADC",
|
||||
"VREF_DACX",
|
||||
"NC",
|
||||
"FLASH_THERM",
|
||||
"NC",
|
||||
"NC",
|
||||
"RF_ID";
|
||||
|
||||
pm8994_mpps_defaults: pm8994-mpps-default-state {
|
||||
lcd-id_adc-mpp {
|
||||
pins = "mpp2";
|
||||
function = "analog";
|
||||
input-enable;
|
||||
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
|
||||
};
|
||||
|
||||
pm-mpp4-nc {
|
||||
pins = "mpp4";
|
||||
function = "digital";
|
||||
bias-high-impedance;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
flash-therm-mpp {
|
||||
pins = "mpp5";
|
||||
function = "analog";
|
||||
input-enable;
|
||||
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
|
||||
};
|
||||
|
||||
mpp6-nc {
|
||||
pins = "mpp6";
|
||||
function = "digital";
|
||||
bias-high-impedance;
|
||||
};
|
||||
|
||||
rf-id-mpp {
|
||||
pins = "mpp8";
|
||||
function = "analog";
|
||||
input-enable;
|
||||
qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pm8994_resin {
|
||||
status = "okay";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
&pmi8994_gpios {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmi8994_gpios_defaults>;
|
||||
|
||||
gpio-line-names =
|
||||
"VIB_LDO_EN",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"USB_SWITCH_SEL",
|
||||
"NC";
|
||||
|
||||
pmi8994_gpios_defaults: pmi8994-gpios-default-state {
|
||||
vib-ldo-en-gpio {
|
||||
pins = "gpio1";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
output-low;
|
||||
bias-disable;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pmi-gpio2-nc {
|
||||
pins = "gpio2";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
input-enable;
|
||||
bias-high-impedance;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
pmi-gpio3-nc {
|
||||
pins = "gpio3";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
input-enable;
|
||||
bias-high-impedance;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_VPH>;
|
||||
};
|
||||
|
||||
pmi-gpio4-nc {
|
||||
pins = "gpio4";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
output-high;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pmi-gpio5-nc {
|
||||
pins = "gpio5";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
output-high;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pmi-gpio6-nc {
|
||||
pins = "gpio6";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
output-high;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pmi-gpio7-nc {
|
||||
pins = "gpio7";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
output-high;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
pmi-gpio8-nc {
|
||||
pins = "gpio8";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
output-high;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
|
||||
usb-switch-sel {
|
||||
pins = "gpio9";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
drive-push-pull;
|
||||
};
|
||||
|
||||
pmi-gpio10-nc {
|
||||
pins = "gpio10";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-low;
|
||||
drive-push-pull;
|
||||
bias-disable;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
power-source = <PM8994_GPIO_S4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmi8994_spmi_regulators {
|
||||
qcom,saw-reg = <&saw3>;
|
||||
|
||||
vdd_gfx:
|
||||
pmi8994_s2: s2 {
|
||||
/* Pinned to a high value for now to avoid random crashes. */
|
||||
regulator-min-microvolt = <1015000>;
|
||||
regulator-max-microvolt = <1015000>;
|
||||
regulator-name = "vdd_gfx";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pmi8994_s9: s9 {
|
||||
qcom,saw-slave;
|
||||
};
|
||||
|
||||
pmi8994_s10: s10 {
|
||||
qcom,saw-slave;
|
||||
};
|
||||
|
||||
pmi8994_s11: s11 {
|
||||
qcom,saw-leader;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <470000>;
|
||||
regulator-max-microvolt = <1140000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pmi8994_wled {
|
||||
status = "okay";
|
||||
default-brightness = <512>;
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
pm8994-regulators {
|
||||
compatible = "qcom,rpm-pm8994-regulators";
|
||||
|
||||
vdd_s1-supply = <&vph_pwr>;
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s3-supply = <&vph_pwr>;
|
||||
vdd_s4-supply = <&vph_pwr>;
|
||||
vdd_s5-supply = <&vph_pwr>;
|
||||
vdd_s6-supply = <&vph_pwr>;
|
||||
vdd_s7-supply = <&vph_pwr>;
|
||||
vdd_s8-supply = <&vph_pwr>;
|
||||
vdd_s9-supply = <&vph_pwr>;
|
||||
vdd_s10-supply = <&vph_pwr>;
|
||||
vdd_s11-supply = <&vph_pwr>;
|
||||
vdd_s12-supply = <&vph_pwr>;
|
||||
vdd_l1-supply = <&pm8994_s3>;
|
||||
vdd_l2_l26_l28-supply = <&pm8994_s3>;
|
||||
vdd_l3_l11-supply = <&pm8994_s3>;
|
||||
vdd_l4_l27_l31-supply = <&pm8994_s3>;
|
||||
vdd_l5_l7-supply = <&pm8994_s5>;
|
||||
vdd_l6_l12_l32-supply = <&pm8994_s5>;
|
||||
vdd_l8_l16_l30-supply = <&vph_pwr>;
|
||||
vdd_l14_l15-supply = <&pm8994_s5>;
|
||||
vdd_l20_l21-supply = <&pm8994_s5>;
|
||||
vdd_l25-supply = <&pm8994_s3>;
|
||||
vdd_lvs1_2-supply = <&pm8994_s4>;
|
||||
|
||||
pm8994_s3: s3 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
pm8994_s4: s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-system-load = <325000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8994_s5: s5 {
|
||||
regulator-min-microvolt = <2150000>;
|
||||
regulator-max-microvolt = <2150000>;
|
||||
};
|
||||
|
||||
pm8994_s7: s7 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
};
|
||||
|
||||
pm8994_l1: l1 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
pm8994_l2: l2 {
|
||||
regulator-min-microvolt = <1250000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
};
|
||||
|
||||
pm8994_l3: l3 {
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
pm8994_l4: l4 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
/* L6 and L7 seem unused. */
|
||||
|
||||
pm8994_l8: l8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8994_l9: l9 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8994_l10: l10 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8994_l11: l11 {
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
pm8994_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8994_l13: l13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-system-load = <22000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8994_l14: l14 {
|
||||
regulator-min-microvolt = <1700000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
};
|
||||
|
||||
pm8994_l15: l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8994_l16: l16 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
|
||||
pm8994_l17: l17 {
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
};
|
||||
|
||||
pm8994_l18: l18 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8994_l19: l19 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
pm8994_l20: l20 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-system-load = <570000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8994_l21: l21 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-system-load = <800000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8994_l22: l22 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
pm8994_l23: l23 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
|
||||
pm8994_l24: l24 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8994_l25: l25 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8994_l27: l27 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
pm8994_l28: l28 {
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <925000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8994_l29: l29 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
|
||||
pm8994_l30: l30 { };
|
||||
|
||||
pm8994_l32: l32 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc1 {
|
||||
/* eMMC doesn't seem to cooperate even in PIO mode.. */
|
||||
status = "disabled";
|
||||
|
||||
vmmc-supply = <&pm8994_l20>;
|
||||
vqmmc-supply = <&pm8994_s4>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
};
|
||||
|
||||
&sdhc2 {
|
||||
status = "okay";
|
||||
|
||||
cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
|
||||
vmmc-supply = <&pm8994_l21>;
|
||||
vqmmc-supply = <&pm8994_l13>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>;
|
||||
pinctrl-0 = <&sw_service_gpio>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
disp_reset_n_gpio: disp-reset-n {
|
||||
pins = "gpio8";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mdp_vsync_p_gpio: mdp-vsync-p {
|
||||
pins = "gpio10";
|
||||
function = "mdp_vsync";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
sw_service_gpio: sw-service-gpio {
|
||||
pins = "gpio16";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
usb_detect: usb-detect {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
|
||||
uim_detect_en: uim-detect-en {
|
||||
pins = "gpio29";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
|
||||
tray_det_pin: tray-det {
|
||||
pins = "gpio40";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
tp_vddio_en: tp-vddio-en {
|
||||
pins = "gpio50";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
|
||||
lcd_vddio_en: lcd-vddio-en {
|
||||
pins = "gpio51";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
wl_host_wake: wl-host-wake {
|
||||
pins = "gpio79";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
input-high;
|
||||
};
|
||||
|
||||
wl_reg_on: wl-reg-on {
|
||||
pins = "gpio84";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
ts_reset_n: ts-rst-n {
|
||||
pins = "gpio89";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
touch_int_n: touch-int-n {
|
||||
pins = "gpio125";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
touch_int_sleep: touch-int-sleep {
|
||||
pins = "gpio125";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* For reasons that are currently unknown (but probably related to fusb301), USB takes about
|
||||
* 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
|
||||
*/
|
||||
&usb3 {
|
||||
status = "okay";
|
||||
qcom,select-utmi-as-pipe-clk;
|
||||
};
|
||||
|
||||
&usb3_dwc3 {
|
||||
extcon = <&usb3_id>;
|
||||
dr_mode = "peripheral";
|
||||
phys = <&hsusb_phy1>;
|
||||
phy-names = "usb2-phy";
|
||||
snps,hird-threshold = /bits/ 8 <0>;
|
||||
};
|
||||
@ -1086,21 +1086,21 @@
|
||||
|
||||
camera0_state_on:
|
||||
camera_rear_default: camera-rear-default {
|
||||
mclk0 {
|
||||
camera0_mclk: mclk0 {
|
||||
pins = "gpio13";
|
||||
function = "cam_mclk";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rst {
|
||||
camera0_rst: rst {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pwdn {
|
||||
camera0_pwdn: pwdn {
|
||||
pins = "gpio26";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
@ -1141,14 +1141,14 @@
|
||||
|
||||
camera2_state_on:
|
||||
camera_front_default: camera-front-default {
|
||||
mclk2 {
|
||||
camera2_mclk: mclk2 {
|
||||
pins = "gpio15";
|
||||
function = "cam_mclk";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rst {
|
||||
camera2_rst: rst {
|
||||
pins = "gpio23";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
@ -2570,7 +2570,7 @@
|
||||
power-domains = <&gcc USB30_GDSC>;
|
||||
status = "disabled";
|
||||
|
||||
usb@6a00000 {
|
||||
usb3_dwc3: usb@6a00000 {
|
||||
compatible = "snps,dwc3";
|
||||
reg = <0x06a00000 0xcc00>;
|
||||
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user