From a18bbe1cb25e699cba633f197a960e6d29c600d5 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 25 Aug 2023 00:19:51 +0300 Subject: [PATCH] ARM: dts: qcom-sdx55: switch USB QMP PHY to new style of bindings Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20230824211952.1397699-16-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 37 +++++++++++--------------- 1 file changed, 16 insertions(+), 21 deletions(-) diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index 2aa5089a8513..f604a27f50be 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -228,31 +228,26 @@ usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx55-qmp-usb3-uni-phy"; - reg = <0x00ff6000 0x1c0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00ff6000 0x1000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_BCR>, - <&gcc GCC_USB3_PHY_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; - usb_ssphy: phy@ff6200 { - reg = <0x00ff6200 0x170>, - <0x00ff6400 0x200>, - <0x00ff6800 0x800>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + status = "disabled"; }; mc_virt: interconnect@1100000 { @@ -603,7 +598,7 @@ iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_hsphy>, <&usb_ssphy>; + phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; };