Revert "net: dsa: sja1105: Clear VLAN filtering offload netdev feature"
This reverts commit e9bf96943b408e6c99dd13fb01cb907335787c61. The topic of the reverted patch is the support for switches with global VLAN filtering, added by commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). Be there a switch with 4 ports swp0 -> swp3, and the following setup: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 ip link set swp1 master br0 What would happen with VLAN-tagged traffic received on standalone ports swp2 and swp3? Well, it would get dropped, were it not for the .ndo_vlan_rx_add_vid and .ndo_vlan_rx_kill_vid implementations (called from vlan_vid_add and vlan_vid_del respectively). Basically, for DSA switches where VLAN filtering is a global attribute, we enforce the standalone ports to have 'rx-vlan-filter: off [fixed]' in their ethtool features, which lets the user know that all VLAN-tagged packets that are not explicitly added in the RX filtering list are dropped. As for the sja1105 driver, at the time of the reverted patch, it was operating in a pretty handicapped mode when it had ports under a bridge with vlan_filtering=1. Specifically, it was unable to terminate traffic through the CPU port (for further explanation see "Traffic support" in Documentation/networking/dsa/sja1105.rst). However, since then, the sja1105 driver has made considerable progress, and that limitation is no longer as severe now. Specifically, since commit 2cafa72e516f ("net: dsa: sja1105: add a new best_effort_vlan_filtering devlink parameter"), the driver is able to perform CPU termination even when some ports are under bridges with vlan_filtering=1. Then, since commit 8841f6e63f2c ("net: dsa: sja1105: make devlink property best_effort_vlan_filtering true by default"), this even became the default operating mode. So we can now take advantage of the logic in the DSA core. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
dc4aa50b13
commit
a1e6f641e3
@ -3049,21 +3049,6 @@ static void sja1105_teardown(struct dsa_switch *ds)
|
||||
}
|
||||
}
|
||||
|
||||
static int sja1105_port_enable(struct dsa_switch *ds, int port,
|
||||
struct phy_device *phy)
|
||||
{
|
||||
struct net_device *slave;
|
||||
|
||||
if (!dsa_is_user_port(ds, port))
|
||||
return 0;
|
||||
|
||||
slave = dsa_to_port(ds, port)->slave;
|
||||
|
||||
slave->features &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sja1105_port_disable(struct dsa_switch *ds, int port)
|
||||
{
|
||||
struct sja1105_private *priv = ds->priv;
|
||||
@ -3491,7 +3476,6 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
|
||||
.get_ethtool_stats = sja1105_get_ethtool_stats,
|
||||
.get_sset_count = sja1105_get_sset_count,
|
||||
.get_ts_info = sja1105_get_ts_info,
|
||||
.port_enable = sja1105_port_enable,
|
||||
.port_disable = sja1105_port_disable,
|
||||
.port_fdb_dump = sja1105_fdb_dump,
|
||||
.port_fdb_add = sja1105_fdb_add,
|
||||
|
Loading…
x
Reference in New Issue
Block a user