diff --git a/MAINTAINERS b/MAINTAINERS
index bc336961ed52..a4ba46fb803a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5857,6 +5857,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
 F:	drivers/gpu/drm/panel/panel-raydium-rm67191.c
 
+DRM DRIVER FOR SAMSUNG DB7430 PANELS
+M:	Linus Walleij <linus.walleij@linaro.org>
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
+F:	drivers/gpu/drm/panel/panel-samsung-db7430.c
+
 DRM DRIVER FOR SITRONIX ST7703 PANELS
 M:	Guido Günther <agx@sigxcpu.org>
 R:	Purism Kernel Team <kernel@puri.sm>
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index ef87d92cdf49..1352dffda705 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -343,6 +343,16 @@ config DRM_PANEL_RONBO_RB070D30
 	  Say Y here if you want to enable support for Ronbo Electronics
 	  RB070D30 1024x600 DSI panel.
 
+config DRM_PANEL_SAMSUNG_DB7430
+	tristate "Samsung DB7430-based DPI panels"
+	depends on OF && SPI && GPIOLIB
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_MIPI_DBI
+	help
+	  Say Y here if you want to enable support for the Samsung
+	  DB7430 DPI display controller used in such devices as the
+	  LMS397KF04 480x800 DPI panel.
+
 config DRM_PANEL_SAMSUNG_S6D16D0
 	tristate "Samsung S6D16D0 DSI video mode panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index cae4d976c069..a350e0990d17 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen
 obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o
 obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
 obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
diff --git a/drivers/gpu/drm/panel/panel-samsung-db7430.c b/drivers/gpu/drm/panel/panel-samsung-db7430.c
new file mode 100644
index 000000000000..ead479719f00
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-samsung-db7430.c
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Panel driver for the Samsung LMS397KF04 480x800 DPI RGB panel.
+ * According to the data sheet the display controller is called DB7430.
+ * Found in the Samsung Galaxy Beam GT-I8350 mobile phone.
+ * Linus Walleij <linus.walleij@linaro.org>
+ */
+#include <drm/drm_mipi_dbi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <video/mipi_display.h>
+
+#define DB7430_ACCESS_PROT_OFF		0xb0
+#define DB7430_UNKNOWN_B4		0xb4
+#define DB7430_USER_SELECT		0xb5
+#define DB7430_UNKNOWN_B7		0xb7
+#define DB7430_UNKNOWN_B8		0xb8
+#define DB7430_PANEL_DRIVING		0xc0
+#define DB7430_SOURCE_CONTROL		0xc1
+#define DB7430_GATE_INTERFACE		0xc4
+#define DB7430_DISPLAY_H_TIMING		0xc5
+#define DB7430_RGB_SYNC_OPTION		0xc6
+#define DB7430_GAMMA_SET_RED		0xc8
+#define DB7430_GAMMA_SET_GREEN		0xc9
+#define DB7430_GAMMA_SET_BLUE		0xca
+#define DB7430_BIAS_CURRENT_CTRL	0xd1
+#define DB7430_DDV_CTRL			0xd2
+#define DB7430_GAMMA_CTRL_REF		0xd3
+#define DB7430_UNKNOWN_D4		0xd4
+#define DB7430_DCDC_CTRL		0xd5
+#define DB7430_VCL_CTRL			0xd6
+#define DB7430_UNKNOWN_F8		0xf8
+#define DB7430_UNKNOWN_FC		0xfc
+
+#define DATA_MASK	0x100
+
+/**
+ * struct db7430 - state container for a panel controlled by the DB7430
+ * controller
+ */
+struct db7430 {
+	/** @dev: the container device */
+	struct device *dev;
+	/** @dbi: the DBI bus abstraction handle */
+	struct mipi_dbi dbi;
+	/** @panel: the DRM panel instance for this device */
+	struct drm_panel panel;
+	/** @width: the width of this panel in mm */
+	u32 width;
+	/** @height: the height of this panel in mm */
+	u32 height;
+	/** @reset: reset GPIO line */
+	struct gpio_desc *reset;
+	/** @regulators: VCCIO and VIO supply regulators */
+	struct regulator_bulk_data regulators[2];
+};
+
+static const struct drm_display_mode db7430_480_800_mode = {
+	/*
+	 * 31 ns period min (htotal*vtotal*vrefresh)/1000
+	 * gives a Vrefresh of ~71 Hz.
+	 */
+	.clock = 32258,
+	.hdisplay = 480,
+	.hsync_start = 480 + 10,
+	.hsync_end = 480 + 10 + 4,
+	.htotal = 480 + 10 + 4 + 40,
+	.vdisplay = 800,
+	.vsync_start = 800 + 6,
+	.vsync_end = 800 + 6 + 1,
+	.vtotal = 800 + 6 + 1 + 7,
+	.width_mm = 53,
+	.height_mm = 87,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static inline struct db7430 *to_db7430(struct drm_panel *panel)
+{
+	return container_of(panel, struct db7430, panel);
+}
+
+static int db7430_power_on(struct db7430 *db)
+{
+	struct mipi_dbi *dbi = &db->dbi;
+	int ret;
+
+	/* Power up */
+	ret = regulator_bulk_enable(ARRAY_SIZE(db->regulators),
+				    db->regulators);
+	if (ret) {
+		dev_err(db->dev, "failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+	msleep(50);
+
+	/* Assert reset >=1 ms */
+	gpiod_set_value_cansleep(db->reset, 1);
+	usleep_range(1000, 5000);
+	/* De-assert reset */
+	gpiod_set_value_cansleep(db->reset, 0);
+	/* Wait >= 10 ms */
+	msleep(10);
+	dev_dbg(db->dev, "de-asserted RESET\n");
+
+	/*
+	 * This is set to 0x0a (RGB/BGR order + horizontal flip) in order
+	 * to make the display behave normally. If this is not set the displays
+	 * normal output behaviour is horizontally flipped and BGR ordered. Do
+	 * it twice because the first message doesn't always "take".
+	 */
+	mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, 0x0a);
+	mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, 0x0a);
+	mipi_dbi_command(dbi, DB7430_ACCESS_PROT_OFF, 0x00);
+	mipi_dbi_command(dbi, DB7430_PANEL_DRIVING, 0x28, 0x08);
+	mipi_dbi_command(dbi, DB7430_SOURCE_CONTROL,
+			 0x01, 0x30, 0x15, 0x05, 0x22);
+	mipi_dbi_command(dbi, DB7430_GATE_INTERFACE,
+			 0x10, 0x01, 0x00);
+	mipi_dbi_command(dbi, DB7430_DISPLAY_H_TIMING,
+			 0x06, 0x55, 0x03, 0x07, 0x0b,
+			 0x33, 0x00, 0x01, 0x03);
+	/*
+	 * 0x00 in datasheet 0x01 in vendor code 0x00, it seems 0x01 means
+	 * DE active high and 0x00 means DE active low.
+	 */
+	mipi_dbi_command(dbi, DB7430_RGB_SYNC_OPTION, 0x01);
+	mipi_dbi_command(dbi, DB7430_GAMMA_SET_RED,
+		/* R positive gamma */ 0x00,
+		0x0A, 0x31, 0x3B, 0x4E, 0x58, 0x59, 0x5B, 0x58, 0x5E, 0x62,
+		0x60, 0x61, 0x5E, 0x62, 0x55, 0x55, 0x7F, 0x08,
+		/* R negative gamma */ 0x00,
+		0x0A, 0x31, 0x3B, 0x4E, 0x58, 0x59, 0x5B, 0x58, 0x5E, 0x62,
+		0x60, 0x61, 0x5E, 0x62, 0x55, 0x55, 0x7F, 0x08);
+	mipi_dbi_command(dbi, DB7430_GAMMA_SET_GREEN,
+		/* G positive gamma */ 0x00,
+		0x25, 0x15, 0x28, 0x3D, 0x4A, 0x48, 0x4C, 0x4A, 0x52, 0x59,
+		0x59, 0x5B, 0x56, 0x60, 0x5D, 0x55, 0x7F, 0x0A,
+		/* G negative gamma */ 0x00,
+		0x25, 0x15, 0x28, 0x3D, 0x4A, 0x48, 0x4C, 0x4A, 0x52, 0x59,
+		0x59, 0x5B, 0x56, 0x60, 0x5D, 0x55, 0x7F, 0x0A);
+	mipi_dbi_command(dbi, DB7430_GAMMA_SET_BLUE,
+		/* B positive gamma */ 0x00,
+		0x48, 0x10, 0x1F, 0x2F, 0x35, 0x38, 0x3D, 0x3C, 0x45, 0x4D,
+		0x4E, 0x52, 0x51, 0x60, 0x7F, 0x7E, 0x7F, 0x0C,
+		/* B negative gamma */ 0x00,
+		0x48, 0x10, 0x1F, 0x2F, 0x35, 0x38, 0x3D, 0x3C, 0x45, 0x4D,
+		0x4E, 0x52, 0x51, 0x60, 0x7F, 0x7E, 0x7F, 0x0C);
+	mipi_dbi_command(dbi, DB7430_BIAS_CURRENT_CTRL, 0x33, 0x13);
+	mipi_dbi_command(dbi, DB7430_DDV_CTRL, 0x11, 0x00, 0x00);
+	mipi_dbi_command(dbi, DB7430_GAMMA_CTRL_REF, 0x50, 0x50);
+	mipi_dbi_command(dbi, DB7430_DCDC_CTRL, 0x2f, 0x11, 0x1e, 0x46);
+	mipi_dbi_command(dbi, DB7430_VCL_CTRL, 0x11, 0x0a);
+
+	return 0;
+}
+
+static int db7430_power_off(struct db7430 *db)
+{
+	/* Go into RESET and disable regulators */
+	gpiod_set_value_cansleep(db->reset, 1);
+	return regulator_bulk_disable(ARRAY_SIZE(db->regulators),
+				      db->regulators);
+}
+
+static int db7430_unprepare(struct drm_panel *panel)
+{
+	return db7430_power_off(to_db7430(panel));
+}
+
+static int db7430_disable(struct drm_panel *panel)
+{
+	struct db7430 *db = to_db7430(panel);
+	struct mipi_dbi *dbi = &db->dbi;
+
+	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF);
+	msleep(25);
+	mipi_dbi_command(dbi, MIPI_DCS_ENTER_SLEEP_MODE);
+	msleep(120);
+
+	return 0;
+}
+
+static int db7430_prepare(struct drm_panel *panel)
+{
+	return db7430_power_on(to_db7430(panel));
+}
+
+static int db7430_enable(struct drm_panel *panel)
+{
+	struct db7430 *db = to_db7430(panel);
+	struct mipi_dbi *dbi = &db->dbi;
+
+	/* Exit sleep mode */
+	mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
+	msleep(20);
+
+	/* NVM (non-volatile memory) load sequence */
+	mipi_dbi_command(dbi, DB7430_UNKNOWN_D4, 0x52, 0x5e);
+	mipi_dbi_command(dbi, DB7430_UNKNOWN_F8, 0x01, 0xf5, 0xf2, 0x71, 0x44);
+	mipi_dbi_command(dbi, DB7430_UNKNOWN_FC, 0x00, 0x08);
+	msleep(150);
+
+	/* CABC turn on sequence (BC = backlight control) */
+	mipi_dbi_command(dbi, DB7430_UNKNOWN_B4, 0x0f, 0x00, 0x50);
+	mipi_dbi_command(dbi, DB7430_USER_SELECT, 0x80);
+	mipi_dbi_command(dbi, DB7430_UNKNOWN_B7, 0x24);
+	mipi_dbi_command(dbi, DB7430_UNKNOWN_B8, 0x01);
+
+	/* Turn on display */
+	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
+
+	return 0;
+}
+
+/**
+ * db7430_get_modes() - return the mode
+ * @panel: the panel to get the mode for
+ * @connector: reference to the central DRM connector control structure
+ */
+static int db7430_get_modes(struct drm_panel *panel,
+			    struct drm_connector *connector)
+{
+	struct db7430 *db = to_db7430(panel);
+	struct drm_display_mode *mode;
+	static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+
+	mode = drm_mode_duplicate(connector->dev, &db7430_480_800_mode);
+	if (!mode) {
+		dev_err(db->dev, "failed to add mode\n");
+		return -ENOMEM;
+	}
+
+	connector->display_info.bpc = 8;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	connector->display_info.bus_flags =
+		DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
+	drm_display_info_set_bus_formats(&connector->display_info,
+					 &bus_format, 1);
+
+	drm_mode_set_name(mode);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs db7430_drm_funcs = {
+	.disable = db7430_disable,
+	.unprepare = db7430_unprepare,
+	.prepare = db7430_prepare,
+	.enable = db7430_enable,
+	.get_modes = db7430_get_modes,
+};
+
+static int db7430_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct db7430 *db;
+	int ret;
+
+	db = devm_kzalloc(dev, sizeof(*db), GFP_KERNEL);
+	if (!db)
+		return -ENOMEM;
+	db->dev = dev;
+
+	/*
+	 * VCI   is the analog voltage supply
+	 * VCCIO is the digital I/O voltage supply
+	 */
+	db->regulators[0].supply = "vci";
+	db->regulators[1].supply = "vccio";
+	ret = devm_regulator_bulk_get(dev,
+				      ARRAY_SIZE(db->regulators),
+				      db->regulators);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to get regulators\n");
+
+	db->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(db->reset)) {
+		ret = PTR_ERR(db->reset);
+		return dev_err_probe(dev, ret, "no RESET GPIO\n");
+	}
+
+	ret = mipi_dbi_spi_init(spi, &db->dbi, NULL);
+	if (ret)
+		return dev_err_probe(dev, ret, "MIPI DBI init failed\n");
+
+	drm_panel_init(&db->panel, dev, &db7430_drm_funcs,
+		       DRM_MODE_CONNECTOR_DPI);
+
+	/* FIXME: if no external backlight, use internal backlight */
+	ret = drm_panel_of_backlight(&db->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to add backlight\n");
+
+	spi_set_drvdata(spi, db);
+
+	drm_panel_add(&db->panel);
+	dev_dbg(dev, "added panel\n");
+
+	return 0;
+}
+
+static int db7430_remove(struct spi_device *spi)
+{
+	struct db7430 *db = spi_get_drvdata(spi);
+
+	drm_panel_remove(&db->panel);
+	return 0;
+}
+
+/*
+ * The DB7430 display controller may be used in several display products,
+ * so list the different variants here and add per-variant data if needed.
+ */
+static const struct of_device_id db7430_match[] = {
+	{ .compatible = "samsung,lms397kf04", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, db7430_match);
+
+static struct spi_driver db7430_driver = {
+	.probe		= db7430_probe,
+	.remove		= db7430_remove,
+	.driver		= {
+		.name	= "db7430-panel",
+		.of_match_table = db7430_match,
+	},
+};
+module_spi_driver(db7430_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("Samsung DB7430 panel driver");
+MODULE_LICENSE("GPL v2");