From a85a43e04523df3b0f1e5f3100592806e29966a8 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Wed, 3 Jul 2019 12:08:14 +0200 Subject: [PATCH] dt-bindings: iio: adc: stm32: add analog switches supply control On stm32h7 and stm32mp1, the ADC inputs are multiplexed with analog switches which have reduced performances when their supply is below 2.7V (vdda by default). Booster or vdd can be used, to get full ADC performances. Add documentation for: - optional booster-supply that can be used on stm32h7 and stm32mp1. - optional vdd-supply that can be used on stm32mp1 to supply analog circuitry, selected by syscfg. Mark these as optional, since this is a trade-off between analog performance and power consumption. Signed-off-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index 93a0bd2efc05..4c0da8c74bb2 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -47,6 +47,12 @@ Required properties: Optional properties: - A pinctrl state named "default" for each ADC channel may be defined to set inX ADC pins in mode of operation for analog input on external pin. +- booster-supply: Phandle to the embedded booster regulator that can be used + to supply ADC analog input switches on stm32h7 and stm32mp1. +- vdd-supply: Phandle to the vdd input voltage. It can be used to supply ADC + analog input switches on stm32mp1. +- st,syscfg: Phandle to system configuration controller. It can be used to + control the analog circuitry on stm32mp1. Contents of a stm32 adc child node: -----------------------------------