iio:adc: Add support for AD7766/AD7767
Add support for the AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1, AD7767-2 Analog to Digital converters. It's a family of single channel 24-bit SAR ADCs. They are all digital interface compatible and the main difference is the internal decimation rate and analog performance. For communication with the host processor a SPI interface is used. In addition the part has a data ready pin that is pulsed for one MCLK cycle when a conversion has completed and can be used as a IIO trigger. Datasheets: http://www.analog.com/media/en/technical-documentation/data-sheets/AD7766.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD7767.pdf Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Lars-Peter Clausen
Jonathan Cameron
parent
bea15d5139
commit
aa16c6bd0e
@ -58,6 +58,18 @@ config AD7476
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called ad7476.
|
||||
|
||||
config AD7766
|
||||
tristate "Analog Devices AD7766/AD7767 ADC driver"
|
||||
depends on SPI_MASTER
|
||||
select IIO_BUFFER
|
||||
select IIO_TRIGGERED_BUFFER
|
||||
help
|
||||
Say yes here to build support for Analog Devices AD7766, AD7766-1,
|
||||
AD7766-2, AD7767, AD7767-1, AD7767-2 SPI analog to digital converters.
|
||||
|
||||
To compile this driver as a module, choose M here: the module will be
|
||||
called ad7766.
|
||||
|
||||
config AD7791
|
||||
tristate "Analog Devices AD7791 ADC driver"
|
||||
depends on SPI
|
||||
|
||||
@ -9,6 +9,7 @@ obj-$(CONFIG_AD7291) += ad7291.o
|
||||
obj-$(CONFIG_AD7298) += ad7298.o
|
||||
obj-$(CONFIG_AD7923) += ad7923.o
|
||||
obj-$(CONFIG_AD7476) += ad7476.o
|
||||
obj-$(CONFIG_AD7766) += ad7766.o
|
||||
obj-$(CONFIG_AD7791) += ad7791.o
|
||||
obj-$(CONFIG_AD7793) += ad7793.o
|
||||
obj-$(CONFIG_AD7887) += ad7887.o
|
||||
|
||||
330
drivers/iio/adc/ad7766.c
Normal file
330
drivers/iio/adc/ad7766.c
Normal file
@ -0,0 +1,330 @@
|
||||
/*
|
||||
* AD7766/AD7767 SPI ADC driver
|
||||
*
|
||||
* Copyright 2016 Analog Devices Inc.
|
||||
*
|
||||
* Licensed under the GPL-2 or later.
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/buffer.h>
|
||||
#include <linux/iio/trigger.h>
|
||||
#include <linux/iio/trigger_consumer.h>
|
||||
#include <linux/iio/triggered_buffer.h>
|
||||
|
||||
struct ad7766_chip_info {
|
||||
unsigned int decimation_factor;
|
||||
};
|
||||
|
||||
enum {
|
||||
AD7766_SUPPLY_AVDD = 0,
|
||||
AD7766_SUPPLY_DVDD = 1,
|
||||
AD7766_SUPPLY_VREF = 2,
|
||||
AD7766_NUM_SUPPLIES = 3
|
||||
};
|
||||
|
||||
struct ad7766 {
|
||||
const struct ad7766_chip_info *chip_info;
|
||||
struct spi_device *spi;
|
||||
struct clk *mclk;
|
||||
struct gpio_desc *pd_gpio;
|
||||
struct regulator_bulk_data reg[AD7766_NUM_SUPPLIES];
|
||||
|
||||
struct iio_trigger *trig;
|
||||
|
||||
struct spi_transfer xfer;
|
||||
struct spi_message msg;
|
||||
|
||||
/*
|
||||
* DMA (thus cache coherency maintenance) requires the
|
||||
* transfer buffers to live in their own cache lines.
|
||||
* Make the buffer large enough for one 24 bit sample and one 64 bit
|
||||
* aligned 64 bit timestamp.
|
||||
*/
|
||||
unsigned char data[ALIGN(3, sizeof(s64)) + sizeof(s64)]
|
||||
____cacheline_aligned;
|
||||
};
|
||||
|
||||
/*
|
||||
* AD7766 and AD7767 variations are interface compatible, the main difference is
|
||||
* analog performance. Both parts will use the same ID.
|
||||
*/
|
||||
enum ad7766_device_ids {
|
||||
ID_AD7766,
|
||||
ID_AD7766_1,
|
||||
ID_AD7766_2,
|
||||
};
|
||||
|
||||
static irqreturn_t ad7766_trigger_handler(int irq, void *p)
|
||||
{
|
||||
struct iio_poll_func *pf = p;
|
||||
struct iio_dev *indio_dev = pf->indio_dev;
|
||||
struct ad7766 *ad7766 = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
ret = spi_sync(ad7766->spi, &ad7766->msg);
|
||||
if (ret < 0)
|
||||
goto done;
|
||||
|
||||
iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data,
|
||||
pf->timestamp);
|
||||
done:
|
||||
iio_trigger_notify_done(indio_dev->trig);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int ad7766_preenable(struct iio_dev *indio_dev)
|
||||
{
|
||||
struct ad7766 *ad7766 = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
ret = regulator_bulk_enable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
|
||||
if (ret < 0) {
|
||||
dev_err(&ad7766->spi->dev, "Failed to enable supplies: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(ad7766->mclk);
|
||||
if (ret < 0) {
|
||||
dev_err(&ad7766->spi->dev, "Failed to enable MCLK: %d\n", ret);
|
||||
regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (ad7766->pd_gpio)
|
||||
gpiod_set_value(ad7766->pd_gpio, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ad7766_postdisable(struct iio_dev *indio_dev)
|
||||
{
|
||||
struct ad7766 *ad7766 = iio_priv(indio_dev);
|
||||
|
||||
if (ad7766->pd_gpio)
|
||||
gpiod_set_value(ad7766->pd_gpio, 1);
|
||||
|
||||
/*
|
||||
* The PD pin is synchronous to the clock, so give it some time to
|
||||
* notice the change before we disable the clock.
|
||||
*/
|
||||
msleep(20);
|
||||
|
||||
clk_disable_unprepare(ad7766->mclk);
|
||||
regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ad7766_read_raw(struct iio_dev *indio_dev,
|
||||
const struct iio_chan_spec *chan, int *val, int *val2, long info)
|
||||
{
|
||||
struct ad7766 *ad7766 = iio_priv(indio_dev);
|
||||
struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer;
|
||||
int scale_uv;
|
||||
|
||||
switch (info) {
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
scale_uv = regulator_get_voltage(vref);
|
||||
if (scale_uv < 0)
|
||||
return scale_uv;
|
||||
*val = scale_uv / 1000;
|
||||
*val2 = chan->scan_type.realbits;
|
||||
return IIO_VAL_FRACTIONAL_LOG2;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
*val = clk_get_rate(ad7766->mclk) /
|
||||
ad7766->chip_info->decimation_factor;
|
||||
return IIO_VAL_INT;
|
||||
}
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec ad7766_channels[] = {
|
||||
{
|
||||
.type = IIO_VOLTAGE,
|
||||
.indexed = 1,
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
|
||||
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
|
||||
.scan_type = {
|
||||
.sign = 's',
|
||||
.realbits = 24,
|
||||
.storagebits = 32,
|
||||
.endianness = IIO_BE,
|
||||
},
|
||||
},
|
||||
IIO_CHAN_SOFT_TIMESTAMP(1),
|
||||
};
|
||||
|
||||
static const struct ad7766_chip_info ad7766_chip_info[] = {
|
||||
[ID_AD7766] = {
|
||||
.decimation_factor = 8,
|
||||
},
|
||||
[ID_AD7766_1] = {
|
||||
.decimation_factor = 16,
|
||||
},
|
||||
[ID_AD7766_2] = {
|
||||
.decimation_factor = 32,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = {
|
||||
.preenable = &ad7766_preenable,
|
||||
.postenable = &iio_triggered_buffer_postenable,
|
||||
.predisable = &iio_triggered_buffer_predisable,
|
||||
.postdisable = &ad7766_postdisable,
|
||||
};
|
||||
|
||||
static const struct iio_info ad7766_info = {
|
||||
.driver_module = THIS_MODULE,
|
||||
.read_raw = &ad7766_read_raw,
|
||||
};
|
||||
|
||||
static irqreturn_t ad7766_irq(int irq, void *private)
|
||||
{
|
||||
iio_trigger_poll(private);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int ad7766_set_trigger_state(struct iio_trigger *trig, bool enable)
|
||||
{
|
||||
struct ad7766 *ad7766 = iio_trigger_get_drvdata(trig);
|
||||
|
||||
if (enable)
|
||||
enable_irq(ad7766->spi->irq);
|
||||
else
|
||||
disable_irq(ad7766->spi->irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct iio_trigger_ops ad7766_trigger_ops = {
|
||||
.owner = THIS_MODULE,
|
||||
.set_trigger_state = ad7766_set_trigger_state,
|
||||
.validate_device = iio_trigger_validate_own_device,
|
||||
};
|
||||
|
||||
static int ad7766_probe(struct spi_device *spi)
|
||||
{
|
||||
const struct spi_device_id *id = spi_get_device_id(spi);
|
||||
struct iio_dev *indio_dev;
|
||||
struct ad7766 *ad7766;
|
||||
int ret;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ad7766));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
ad7766 = iio_priv(indio_dev);
|
||||
ad7766->chip_info = &ad7766_chip_info[id->driver_data];
|
||||
|
||||
ad7766->mclk = devm_clk_get(&spi->dev, "mclk");
|
||||
if (IS_ERR(ad7766->mclk))
|
||||
return PTR_ERR(ad7766->mclk);
|
||||
|
||||
ad7766->reg[AD7766_SUPPLY_AVDD].supply = "avdd";
|
||||
ad7766->reg[AD7766_SUPPLY_DVDD].supply = "dvdd";
|
||||
ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref";
|
||||
|
||||
ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg),
|
||||
ad7766->reg);
|
||||
if (IS_ERR(ad7766->reg))
|
||||
return PTR_ERR(ad7766->reg);
|
||||
|
||||
ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
|
||||
GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(ad7766->pd_gpio))
|
||||
return PTR_ERR(ad7766->pd_gpio);
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = ad7766_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(ad7766_channels);
|
||||
indio_dev->info = &ad7766_info;
|
||||
|
||||
if (spi->irq > 0) {
|
||||
ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
|
||||
indio_dev->name, indio_dev->id);
|
||||
if (!ad7766->trig)
|
||||
return -ENOMEM;
|
||||
|
||||
ad7766->trig->ops = &ad7766_trigger_ops;
|
||||
ad7766->trig->dev.parent = &spi->dev;
|
||||
iio_trigger_set_drvdata(ad7766->trig, ad7766);
|
||||
|
||||
ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq,
|
||||
IRQF_TRIGGER_FALLING, dev_name(&spi->dev),
|
||||
ad7766->trig);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* The device generates interrupts as long as it is powered up.
|
||||
* Some platforms might not allow the option to power it down so
|
||||
* disable the interrupt to avoid extra load on the system
|
||||
*/
|
||||
disable_irq(spi->irq);
|
||||
|
||||
ret = devm_iio_trigger_register(&spi->dev, ad7766->trig);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
spi_set_drvdata(spi, indio_dev);
|
||||
|
||||
ad7766->spi = spi;
|
||||
|
||||
/* First byte always 0 */
|
||||
ad7766->xfer.rx_buf = &ad7766->data[1];
|
||||
ad7766->xfer.len = 3;
|
||||
|
||||
spi_message_init(&ad7766->msg);
|
||||
spi_message_add_tail(&ad7766->xfer, &ad7766->msg);
|
||||
|
||||
ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
|
||||
&iio_pollfunc_store_time, &ad7766_trigger_handler,
|
||||
&ad7766_buffer_setup_ops);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = devm_iio_device_register(&spi->dev, indio_dev);
|
||||
if (ret)
|
||||
return ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct spi_device_id ad7766_id[] = {
|
||||
{"ad7766", ID_AD7766},
|
||||
{"ad7766-1", ID_AD7766_1},
|
||||
{"ad7766-2", ID_AD7766_2},
|
||||
{"ad7767", ID_AD7766},
|
||||
{"ad7767-1", ID_AD7766_1},
|
||||
{"ad7767-2", ID_AD7766_2},
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(spi, ad7766_id);
|
||||
|
||||
static struct spi_driver ad7766_driver = {
|
||||
.driver = {
|
||||
.name = "ad7766",
|
||||
},
|
||||
.probe = ad7766_probe,
|
||||
.id_table = ad7766_id,
|
||||
};
|
||||
module_spi_driver(ad7766_driver);
|
||||
|
||||
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
||||
MODULE_DESCRIPTION("Analog Devices AD7766 and AD7767 ADCs driver support");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user