iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

net: stmmac: dwmac-ipq806x: account for rgmii-txid/rxid/id phy-mode

Browse Source 
Currently the ipq806x dwmac driver is almost always used attached to the
CPU port of a switch and phy-mode was always set to "rgmii" or "sgmii".

Some device came up with a special configuration where the PHY is
directly attached to the GMAC port and in those case phy-mode needs to
be set to "rgmii-id" to make the PHY correctly work and receive packets.

Since the driver supports only "rgmii" and "sgmii" mode, when "rgmii-id"
(or variants) mode is set, the mode is rejected and probe fails.

Add support also for these phy-modes to correctly setup PHYs that requires
delay applied to tx/rx.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Christian Marangi 2024-05-06 14:32:46 +02:00 committed by David S. Miller
parent b7ffab29a8
commit abb45a2477
1 changed files with 12 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
View File

@ -171,6 +171,9 @@ static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
switch (gmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
div = get_clk_div_rgmii(gmac, speed);
clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
@ -410,6 +413,9 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
switch (gmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
break;
case PHY_INTERFACE_MODE_SGMII:
@ -425,6 +431,9 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
val &= ~(1 << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id));
switch (gmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
break;
@ -442,6 +451,9 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
switch (gmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
break;