cfg80211: leave invalid channels on regdomain change

When the regulatory settings change, some channels might become invalid.
Disconnect interfaces acting on these channels, after giving userspace
code a grace period to leave them.

This mode is currently opt-in, and not all interface operating modes are
supported for regulatory-enforcement checks. A wiphy that wishes to use
the new enforcement code must specify an appropriate regulatory flag,
and all its supported interface modes must be supported by the checking
code.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com>
[fix some indentation, typos]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This commit is contained in:
Arik Nemtsov 2014-11-27 09:44:55 +02:00 committed by Johannes Berg
parent 336004e291
commit ad932f046f
3 changed files with 132 additions and 1 deletions

View File

@ -136,6 +136,17 @@ struct regulatory_request {
* otherwise initiating radiation is not allowed. This will enable the
* relaxations enabled under the CFG80211_REG_RELAX_NO_IR configuration
* option
* @REGULATORY_IGNORE_STALE_KICKOFF: the regulatory core will _not_ make sure
* all interfaces on this wiphy reside on allowed channels. If this flag
* is not set, upon a regdomain change, the interfaces are given a grace
* period (currently 60 seconds) to disconnect or move to an allowed
* channel. Interfaces on forbidden channels are forcibly disconnected.
* Currently these types of interfaces are supported for enforcement:
* NL80211_IFTYPE_ADHOC, NL80211_IFTYPE_STATION, NL80211_IFTYPE_AP,
* NL80211_IFTYPE_AP_VLAN, NL80211_IFTYPE_MONITOR,
* NL80211_IFTYPE_P2P_CLIENT, NL80211_IFTYPE_P2P_GO,
* NL80211_IFTYPE_P2P_DEVICE. The flag will be set by default if a device
* includes any modes unsupported for enforcement checking.
*/
enum ieee80211_regulatory_flags {
REGULATORY_CUSTOM_REG = BIT(0),
@ -144,6 +155,7 @@ enum ieee80211_regulatory_flags {
REGULATORY_COUNTRY_IE_FOLLOW_POWER = BIT(3),
REGULATORY_COUNTRY_IE_IGNORE = BIT(4),
REGULATORY_ENABLE_RELAX_NO_IR = BIT(5),
REGULATORY_IGNORE_STALE_KICKOFF = BIT(6),
};
struct ieee80211_freq_range {

View File

@ -546,6 +546,20 @@ int wiphy_register(struct wiphy *wiphy)
!rdev->ops->tdls_cancel_channel_switch)))
return -EINVAL;
/*
* if a wiphy has unsupported modes for regulatory channel enforcement,
* opt-out of enforcement checking
*/
if (wiphy->interface_modes & ~(BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_P2P_DEVICE) |
BIT(NL80211_IFTYPE_AP_VLAN) |
BIT(NL80211_IFTYPE_MONITOR)))
wiphy->regulatory_flags |= REGULATORY_IGNORE_STALE_KICKOFF;
if (WARN_ON(wiphy->coalesce &&
(!wiphy->coalesce->n_rules ||
!wiphy->coalesce->n_patterns) &&

View File

@ -56,6 +56,7 @@
#include <net/cfg80211.h>
#include "core.h"
#include "reg.h"
#include "rdev-ops.h"
#include "regdb.h"
#include "nl80211.h"
@ -66,6 +67,12 @@
#define REG_DBG_PRINT(args...)
#endif
/*
* Grace period we give before making sure all current interfaces reside on
* channels allowed by the current regulatory domain.
*/
#define REG_ENFORCE_GRACE_MS 60000
/**
* enum reg_request_treatment - regulatory request treatment
*
@ -210,6 +217,9 @@ struct reg_beacon {
struct ieee80211_channel chan;
};
static void reg_check_chans_work(struct work_struct *work);
static DECLARE_DELAYED_WORK(reg_check_chans, reg_check_chans_work);
static void reg_todo(struct work_struct *work);
static DECLARE_WORK(reg_work, reg_todo);
@ -1518,6 +1528,96 @@ static void reg_call_notifier(struct wiphy *wiphy,
wiphy->reg_notifier(wiphy, request);
}
static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev)
{
struct ieee80211_channel *ch;
struct cfg80211_chan_def chandef;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
bool ret = true;
wdev_lock(wdev);
if (!wdev->netdev || !netif_running(wdev->netdev))
goto out;
switch (wdev->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
if (!wdev->beacon_interval)
goto out;
ret = cfg80211_reg_can_beacon(wiphy,
&wdev->chandef, wdev->iftype);
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_ADHOC:
if (!wdev->current_bss ||
!wdev->current_bss->pub.channel)
goto out;
ch = wdev->current_bss->pub.channel;
if (rdev->ops->get_channel &&
!rdev_get_channel(rdev, wdev, &chandef))
ret = cfg80211_chandef_usable(wiphy, &chandef,
IEEE80211_CHAN_DISABLED);
else
ret = !(ch->flags & IEEE80211_CHAN_DISABLED);
break;
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_DEVICE:
/* no enforcement required */
break;
default:
/* others not implemented for now */
WARN_ON(1);
break;
}
out:
wdev_unlock(wdev);
return ret;
}
static void reg_leave_invalid_chans(struct wiphy *wiphy)
{
struct wireless_dev *wdev;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
ASSERT_RTNL();
list_for_each_entry(wdev, &rdev->wdev_list, list)
if (!reg_wdev_chan_valid(wiphy, wdev))
cfg80211_leave(rdev, wdev);
}
static void reg_check_chans_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
REG_DBG_PRINT("Verifying active interfaces after reg change\n");
rtnl_lock();
list_for_each_entry(rdev, &cfg80211_rdev_list, list)
if (!(rdev->wiphy.regulatory_flags &
REGULATORY_IGNORE_STALE_KICKOFF))
reg_leave_invalid_chans(&rdev->wiphy);
rtnl_unlock();
}
static void reg_check_channels(void)
{
/*
* Give usermode a chance to do something nicer (move to another
* channel, orderly disconnection), before forcing a disconnection.
*/
mod_delayed_work(system_power_efficient_wq,
&reg_check_chans,
msecs_to_jiffies(REG_ENFORCE_GRACE_MS));
}
static void wiphy_update_regulatory(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator)
{
@ -1557,6 +1657,8 @@ static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator)
wiphy = &rdev->wiphy;
wiphy_update_regulatory(wiphy, initiator);
}
reg_check_channels();
}
static void handle_channel_custom(struct wiphy *wiphy,
@ -1976,8 +2078,10 @@ static void reg_process_hint(struct regulatory_request *reg_request)
/* This is required so that the orig_* parameters are saved */
if (treatment == REG_REQ_ALREADY_SET && wiphy &&
wiphy->regulatory_flags & REGULATORY_STRICT_REG)
wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
wiphy_update_regulatory(wiphy, reg_request->initiator);
reg_check_channels();
}
return;
@ -2858,6 +2962,7 @@ void regulatory_exit(void)
cancel_work_sync(&reg_work);
cancel_delayed_work_sync(&reg_timeout);
cancel_delayed_work_sync(&reg_check_chans);
/* Lock to suppress warnings */
rtnl_lock();