iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[PATCH] skge: clear PCI PHY COMA mode on boot

Browse Source 
When skge is booted up, the PHY may be stuck in power down state
by the previous OS. So we may need to turn it on.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Stephen Hemminger 2005-11-08 10:33:40 -08:00 committed by Jeff Garzik
parent 3133c5e896
commit adba9e23b4
2 changed files with 12 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/net/skge.c
View File

@ -2893,6 +2893,7 @@ static const char *skge_board_name(const struct skge_hw *hw)
*/
static int skge_reset(struct skge_hw *hw)
{
u32 reg;
u16 ctst;
u8 t8, mac_cfg, pmd_type, phy_type;
int i;
@ -2971,6 +2972,7 @@ static int skge_reset(struct skge_hw *hw)
/* switch power to VCC (WA for VAUX problem) */
skge_write8(hw, B0_POWER_CTRL,
PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
/* avoid boards with stuck Hardware error bits */
if ((skge_read32(hw, B0_ISRC) & IS_HW_ERR) &&
(skge_read32(hw, B0_HWE_ISRC) & IS_IRQ_SENSOR)) {
@ -2978,6 +2980,14 @@ static int skge_reset(struct skge_hw *hw)
hw->intr_mask &= ~IS_HW_ERR;
}
/* Clear PHY COMA */
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg);
reg &= ~PCI_PHY_COMA;
pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg);
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
for (i = 0; i < hw->ports; i++) {
skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);

2
drivers/net/skge.h
View File

@ -6,6 +6,8 @@
/* PCI config registers */
#define PCI_DEV_REG1 0x40
#define PCI_PHY_COMA 0x8000000
#define PCI_VIO 0x2000000
#define PCI_DEV_REG2 0x44
#define PCI_REV_DESC 0x4