power: reset: Add AT91 poweroff driver
Add a driver to handle the shutdown of the Atmel SoCs. This code used to be (and still is) in arch/arm/mach-at91. We didn't remove it yet so that we can convert all the boards to using this driver, before removing it entirely in a separate patch. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
parent
ecfe64d8c5
commit
ae499f0fad
@ -14,6 +14,14 @@ config POWER_RESET_AS3722
|
||||
help
|
||||
This driver supports turning off board via a ams AS3722 power-off.
|
||||
|
||||
config POWER_RESET_AT91_POWEROFF
|
||||
bool "Atmel AT91 poweroff driver"
|
||||
depends on MACH_AT91
|
||||
default SOC_AT91SAM9 || SOC_SAMA5
|
||||
help
|
||||
This driver supports poweroff for Atmel AT91SAM9 and SAMA5
|
||||
SoCs
|
||||
|
||||
config POWER_RESET_AT91_RESET
|
||||
bool "Atmel AT91 reset driver"
|
||||
depends on MACH_AT91
|
||||
|
@ -1,4 +1,5 @@
|
||||
obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
|
||||
obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
|
||||
obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
|
||||
obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
|
||||
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
|
||||
|
156
drivers/power/reset/at91-poweroff.c
Normal file
156
drivers/power/reset/at91-poweroff.c
Normal file
@ -0,0 +1,156 @@
|
||||
/*
|
||||
* Atmel AT91 SAM9 SoCs reset code
|
||||
*
|
||||
* Copyright (C) 2007 Atmel Corporation.
|
||||
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
||||
* Copyright (C) 2014 Free Electrons
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/printk.h>
|
||||
|
||||
#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
|
||||
#define AT91_SHDW_SHDW BIT(0) /* Shut Down command */
|
||||
#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */
|
||||
|
||||
#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
|
||||
#define AT91_SHDW_WKMODE0 GENMASK(2, 0) /* Wake-up 0 Mode Selection */
|
||||
#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */
|
||||
#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
|
||||
#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
|
||||
#define AT91_SHDW_RTTWKEN BIT(16) /* Real Time Timer Wake-up Enable */
|
||||
#define AT91_SHDW_RTCWKEN BIT(17) /* Real Time Clock Wake-up Enable */
|
||||
|
||||
#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
|
||||
#define AT91_SHDW_WAKEUP0 BIT(0) /* Wake-up 0 Status */
|
||||
#define AT91_SHDW_RTTWK BIT(16) /* Real-time Timer Wake-up */
|
||||
#define AT91_SHDW_RTCWK BIT(17) /* Real-time Clock Wake-up [SAM9RL] */
|
||||
|
||||
enum wakeup_type {
|
||||
AT91_SHDW_WKMODE0_NONE = 0,
|
||||
AT91_SHDW_WKMODE0_HIGH = 1,
|
||||
AT91_SHDW_WKMODE0_LOW = 2,
|
||||
AT91_SHDW_WKMODE0_ANYLEVEL = 3,
|
||||
};
|
||||
|
||||
static const char *shdwc_wakeup_modes[] = {
|
||||
[AT91_SHDW_WKMODE0_NONE] = "none",
|
||||
[AT91_SHDW_WKMODE0_HIGH] = "high",
|
||||
[AT91_SHDW_WKMODE0_LOW] = "low",
|
||||
[AT91_SHDW_WKMODE0_ANYLEVEL] = "any",
|
||||
};
|
||||
|
||||
static void __iomem *at91_shdwc_base;
|
||||
|
||||
static void __init at91_wakeup_status(void)
|
||||
{
|
||||
u32 reg = readl(at91_shdwc_base);
|
||||
char *reason = "unknown";
|
||||
|
||||
/* Simple power-on, just bail out */
|
||||
if (!reg)
|
||||
return;
|
||||
|
||||
if (reg & AT91_SHDW_RTTWK)
|
||||
reason = "RTT";
|
||||
else if (reg & AT91_SHDW_RTCWK)
|
||||
reason = "RTC";
|
||||
|
||||
pr_info("AT91: Wake-Up source: %s\n", reason);
|
||||
}
|
||||
|
||||
static void at91_poweroff(void)
|
||||
{
|
||||
writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, at91_shdwc_base + AT91_SHDW_CR);
|
||||
}
|
||||
|
||||
const enum wakeup_type at91_poweroff_get_wakeup_mode(struct device_node *np)
|
||||
{
|
||||
const char *pm;
|
||||
int err, i;
|
||||
|
||||
err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
|
||||
if (err < 0)
|
||||
return AT91_SHDW_WKMODE0_ANYLEVEL;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
|
||||
if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
|
||||
return i;
|
||||
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev)
|
||||
{
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
enum wakeup_type wakeup_mode;
|
||||
u32 mode = 0, tmp;
|
||||
|
||||
wakeup_mode = at91_poweroff_get_wakeup_mode(np);
|
||||
if (wakeup_mode < 0) {
|
||||
dev_warn(&pdev->dev, "shdwc unknown wakeup mode\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (!of_property_read_u32(np, "atmel,wakeup-counter", &tmp)) {
|
||||
if (tmp > AT91_SHDW_CPTWK0_MAX) {
|
||||
dev_warn(&pdev->dev,
|
||||
"shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n",
|
||||
tmp, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
|
||||
tmp = AT91_SHDW_CPTWK0_MAX;
|
||||
}
|
||||
mode |= AT91_SHDW_CPTWK0_(tmp);
|
||||
}
|
||||
|
||||
if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
|
||||
mode |= AT91_SHDW_RTCWKEN;
|
||||
|
||||
if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
|
||||
mode |= AT91_SHDW_RTTWKEN;
|
||||
|
||||
writel(wakeup_mode | mode, at91_shdwc_base + AT91_SHDW_MR);
|
||||
}
|
||||
|
||||
static int at91_poweroff_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(at91_shdwc_base)) {
|
||||
dev_err(&pdev->dev, "Could not map reset controller address\n");
|
||||
return PTR_ERR(at91_shdwc_base);
|
||||
}
|
||||
|
||||
at91_wakeup_status();
|
||||
|
||||
if (pdev->dev.of_node)
|
||||
at91_poweroff_dt_set_wakeup_mode(pdev);
|
||||
|
||||
pm_power_off = at91_poweroff;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct of_device_id at91_poweroff_of_match[] = {
|
||||
{ .compatible = "atmel,at91sam9260-shdwc", },
|
||||
{ .compatible = "atmel,at91sam9rl-shdwc", },
|
||||
{ .compatible = "atmel,at91sam9x5-shdwc", },
|
||||
{ /*sentinel*/ }
|
||||
};
|
||||
|
||||
static struct platform_driver at91_poweroff_driver = {
|
||||
.probe = at91_poweroff_probe,
|
||||
.driver = {
|
||||
.name = "at91-poweroff",
|
||||
.of_match_table = at91_poweroff_of_match,
|
||||
},
|
||||
};
|
||||
module_platform_driver(at91_poweroff_driver);
|
Loading…
Reference in New Issue
Block a user