Merge tag 'acpi-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "These are mostly docmentation fixes and janitorial changes plus some
  new device IDs and a new quirk.

  Specifics:

   - Fix documentation regarding GPIO properties (Andy Shevchenko)

   - Fix spelling mistakes in ACPI documentation (Flavio Suligoi)

   - Fix white space inconsistencies in ACPI code (Maximilian Luz)

   - Fix string formatting in the ACPI Generic Event Device (GED) driver
     (Nick Desaulniers)

   - Add Intel Alder Lake device IDs to the ACPI drivers used by the
     Dynamic Platform and Thermal Framework (Srinivas Pandruvada)

   - Add lid-related DMI quirk for Medion Akoya E2228T to the ACPI
     button driver (Hans de Goede)"

* tag 'acpi-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Support Alder Lake
  Documentation: ACPI: fix spelling mistakes
  ACPI: button: Add DMI quirk for Medion Akoya E2228T
  ACPI: GED: fix -Wformat
  ACPI: Fix whitespace inconsistencies
  ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name
  Documentation: firmware-guide: gpio-properties: Clarify initial output state
  Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  Documentation: firmware-guide: gpio-properties: Fix factual mistakes

Documentation/firmware-guide/acpi/acpi-lid.rst

@@ -19,9 +19,9 @@ report the "current" state of the lid as either "opened" or "closed".
 
 For most platforms, both the _LID method and the lid notifications are
 reliable. However, there are exceptions. In order to work with these
-exceptional buggy platforms, special restrictions and expections should be
+exceptional buggy platforms, special restrictions and exceptions should be
 taken into account. This document describes the restrictions and the
-expections of the Linux ACPI lid device driver.
+exceptions of the Linux ACPI lid device driver.
 
 
 Restrictions of the returning value of the _LID control method
@@ -46,7 +46,7 @@ state is changed to "closed". The "closed" notification is normally used to
 trigger some system power saving operations on Windows. Since it is fully
 tested, it is reliable from all AML tables.
 
-Expections for the userspace users of the ACPI lid device driver
+Exceptions for the userspace users of the ACPI lid device driver
 ================================================================
 
 The ACPI button driver exports the lid state to the userspace via the
@@ -100,7 +100,7 @@ use the following kernel parameter:
 C. button.lid_init_state=ignore:
    When this option is specified, the ACPI button driver never reports the
    initial lid state and there is a compensation mechanism implemented to
-   ensure that the reliable "closed" notifications can always be delievered
+   ensure that the reliable "closed" notifications can always be delivered
    to the userspace by always pairing "closed" input events with complement
    "opened" input events. But there is still no guarantee that the "opened"
    notifications can be delivered to the userspace when the lid is actually

Documentation/firmware-guide/acpi/gpio-properties.rst

@@ -20,9 +20,9 @@ index, like the ASL example below shows::
 
       Name (_CRS, ResourceTemplate ()
       {
-          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionOutputOnly,
                   "\\_SB.GPO0", 0, ResourceConsumer) {15}
-          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionOutputOnly,
                   "\\_SB.GPO0", 0, ResourceConsumer) {27, 31}
       })
 
@@ -49,15 +49,41 @@ index
 pin
   Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
 active_low
-  If 1 the GPIO is marked as active_low.
+  If 1, the GPIO is marked as active_low.
 
 Since ACPI GpioIo() resource does not have a field saying whether it is
 active low or high, the "active_low" argument can be used here.  Setting
 it to 1 marks the GPIO as active low.
 
+Note, active_low in _DSD does not make sense for GpioInt() resource and
+must be 0. GpioInt() resource has its own means of defining it.
+
 In our Bluetooth example the "reset-gpios" refers to the second GpioIo()
 resource, second pin in that resource with the GPIO number of 31.
 
+The GpioIo() resource unfortunately doesn't explicitly provide an initial
+state of the output pin which driver should use during its initialization.
+
+Linux tries to use common sense here and derives the state from the bias
+and polarity settings. The table below shows the expectations:
+
+=========  =============  ==============
+Pull Bias     Polarity     Requested...
+=========  =============  ==============
+Implicit     x            AS IS (assumed firmware configured for us)
+Explicit     x (no _DSD)  as Pull Bias (Up == High, Down == Low),
+                          assuming non-active (Polarity = !Pull Bias)
+Down         Low          as low, assuming active
+Down         High         as low, assuming non-active
+Up           Low          as high, assuming non-active
+Up           High         as high, assuming active
+=========  =============  ==============
+
+That said, for our above example the both GPIOs, since the bias setting
+is explicit and _DSD is present, will be treated as active with a high
+polarity and Linux will configure the pins in this state until a driver
+reprograms them differently.
+
 It is possible to leave holes in the array of GPIOs. This is useful in
 cases like with SPI host controllers where some chip selects may be
 implemented as GPIOs and some as native signals. For example a SPI host
@@ -112,8 +138,8 @@ Example::
   Package () {
       "gpio-line-names",
       Package () {
-          "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD", "MUX7_IO",
-          "LVL_C_A1", "MUX0_IO", "SPI1_MISO"
+          "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD",
+          "MUX7_IO", "LVL_C_A1", "MUX0_IO", "SPI1_MISO",
       }
   }
 
@@ -137,7 +163,7 @@ to the GPIO lines it is going to use and provide the GPIO subsystem with a
 mapping between those names and the ACPI GPIO resources corresponding to them.
 
 To do that, the driver needs to define a mapping table as a NULL-terminated
-array of struct acpi_gpio_mapping objects that each contain a name, a pointer
+array of struct acpi_gpio_mapping objects that each contains a name, a pointer
 to an array of line data (struct acpi_gpio_params) objects and the size of that
 array.  Each struct acpi_gpio_params object consists of three fields,
 crs_entry_index, line_index, active_low, representing the index of the target
@@ -154,13 +180,14 @@ question would look like this::
   static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = {
     { "reset-gpios", &reset_gpio, 1 },
     { "shutdown-gpios", &shutdown_gpio, 1 },
-    { },
+    { }
   };
 
 Next, the mapping table needs to be passed as the second argument to
-acpi_dev_add_driver_gpios() that will register it with the ACPI device object
-pointed to by its first argument.  That should be done in the driver's .probe()
-routine.  On removal, the driver should unregister its GPIO mapping table by
+acpi_dev_add_driver_gpios() or its managed analogue that will
+register it with the ACPI device object pointed to by its first
+argument. That should be done in the driver's .probe() routine.
+On removal, the driver should unregister its GPIO mapping table by
 calling acpi_dev_remove_driver_gpios() on the ACPI device object where that
 table was previously registered.
 
@@ -191,12 +218,12 @@ The driver might expect to get the right GPIO when it does::
 but since there is no way to know the mapping between "reset" and
 the GpioIo() in _CRS desc will hold ERR_PTR(-ENOENT).
 
-The driver author can solve this by passing the mapping explictly
-(the recommended way and documented in the above chapter).
+The driver author can solve this by passing the mapping explicitly
+(this is the recommended way and it's documented in the above chapter).
 
 The ACPI GPIO mapping tables should not contaminate drivers that are not
 knowing about which exact device they are servicing on. It implies that
-the ACPI GPIO mapping tables are hardly linked to ACPI ID and certain
+the ACPI GPIO mapping tables are hardly linked to an ACPI ID and certain
 objects, as listed in the above chapter, of the device in question.
 
 Getting GPIO descriptor
@@ -229,5 +256,5 @@ Case 2 explicitly tells GPIO core to look for resources in _CRS.
 Be aware that gpiod_get_index() in cases 1 and 2, assuming that there
 are two versions of ACPI device description provided and no mapping is
 present in the driver, will return different resources. That's why a
-certain driver has to handle them carefully as explained in previous
+certain driver has to handle them carefully as explained in the previous
 chapter.

Documentation/firmware-guide/acpi/method-tracing.rst

@@ -98,7 +98,7 @@ subject to change::
    [    0.188903]   exdebug-0398 ex_trace_point        : Method End [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
 
 Developers can utilize these special log entries to track the AML
-interpretion, thus can aid issue debugging and performance tuning. Note
+interpretation, thus can aid issue debugging and performance tuning. Note
 that, as the "AML tracer" logs are implemented via ACPI_DEBUG_PRINT()
 macro, CONFIG_ACPI_DEBUG is also required to be enabled for enabling
 "AML tracer" logs.

drivers/acpi/button.c

@@ -89,7 +89,18 @@ static const struct dmi_system_id dmi_lid_quirks[] = {
 		 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "E2215T MD60198"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E2215T"),
+		},
+		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
+	},
+	{
+		/*
+		 * Medion Akoya E2228T, notification of the LID device only
+		 * happens on close, not on open and _LID always returns closed.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E2228T"),
 		},
 		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
 	},

drivers/acpi/dptf/dptf_pch_fivr.c

@@ -106,6 +106,7 @@ static int pch_fivr_remove(struct platform_device *pdev)
 
 static const struct acpi_device_id pch_fivr_device_ids[] = {
 	{"INTC1045", 0},
+	{"INTC1049", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, pch_fivr_device_ids);

drivers/acpi/dptf/dptf_power.c

@@ -229,6 +229,8 @@ static const struct acpi_device_id int3407_device_ids[] = {
 	{"INT3532", 0},
 	{"INTC1047", 0},
 	{"INTC1050", 0},
+	{"INTC1060", 0},
+	{"INTC1061", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, int3407_device_ids);

drivers/acpi/dptf/int340x_thermal.c

@@ -25,10 +25,16 @@ static const struct acpi_device_id int340x_thermal_device_ids[] = {
 	{"INT340A"},
 	{"INT340B"},
 	{"INTC1040"},
+	{"INTC1041"},
 	{"INTC1043"},
 	{"INTC1044"},
 	{"INTC1045"},
+	{"INTC1046"},
 	{"INTC1047"},
+	{"INTC1048"},
+	{"INTC1049"},
+	{"INTC1060"},
+	{"INTC1061"},
 	{""},
 };
 

drivers/acpi/evged.c

@@ -101,7 +101,7 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares,
 
 	switch (gsi) {
 	case 0 ... 255:
-		sprintf(ev_name, "_%c%02hhX",
+		sprintf(ev_name, "_%c%02X",
 			trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
 
 		if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))

drivers/acpi/fan.c

@@ -27,6 +27,7 @@ static const struct acpi_device_id fan_device_ids[] = {
 	{"PNP0C0B", 0},
 	{"INT3404", 0},
 	{"INTC1044", 0},
+	{"INTC1048", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, fan_device_ids);

drivers/acpi/scan.c

@@ -1453,7 +1453,7 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
 }
 
 /**
- * acpi_dma_configure - Set-up DMA configuration for the device.
+ * acpi_dma_configure_id - Set-up DMA configuration for the device.
  * @dev: The pointer to the device
  * @attr: device dma attributes
  * @input_id: input device id const value pointer