From 914a76ca5eedc9f286a36f61c4eaa95b451ba3e6 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Mar 2011 15:44:33 -0400 Subject: [PATCH 001/135] oprofile, x86: Allow setting EDGE/INV/CMASK for counter events For some performance events it's useful to set the EDGE and INV bits and the CMASK mask in the counter control register. The list of predefined events Intel releases for each CPU has some events which require these settings to get more "natural" to use higher level events. oprofile currently doesn't allow this. This patch adds new extra configuration fields for them, so that they can be specified in oprofilefs. An updated oprofile daemon can then make use of this to set them. v2: Write back masked extra value to variable. Signed-off-by: Andi Kleen Signed-off-by: Robert Richter --- arch/x86/oprofile/nmi_int.c | 5 +++++ arch/x86/oprofile/op_counter.h | 1 + 2 files changed, 6 insertions(+) diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index e2b7b0c06cdf..ee165f1a1f37 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -49,6 +49,10 @@ u64 op_x86_get_ctrl(struct op_x86_model_spec const *model, val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0; val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0; val |= (counter_config->unit_mask & 0xFF) << 8; + counter_config->extra &= (ARCH_PERFMON_EVENTSEL_INV | + ARCH_PERFMON_EVENTSEL_EDGE | + ARCH_PERFMON_EVENTSEL_CMASK); + val |= counter_config->extra; event &= model->event_mask ? model->event_mask : 0xFF; val |= event & 0xFF; val |= (event & 0x0F00) << 24; @@ -440,6 +444,7 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root) oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask); oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel); oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user); + oprofilefs_create_ulong(sb, dir, "extra", &counter_config[i].extra); } return 0; diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h index e28398df0df2..0b7b7b179cbe 100644 --- a/arch/x86/oprofile/op_counter.h +++ b/arch/x86/oprofile/op_counter.h @@ -22,6 +22,7 @@ struct op_counter_config { unsigned long kernel; unsigned long user; unsigned long unit_mask; + unsigned long extra; }; extern struct op_counter_config counter_config[]; From 6ee3b5a12740eddc5a76e130b6cc7cc64468d1f7 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 24 Mar 2011 13:26:43 +0000 Subject: [PATCH 002/135] drm/i915/lvds: Always return connected in the absence of better information The LVDS connector should default to connected. We tried our best to verify the claims of the BIOS that the hardware exists during init(), and then during detect() we then try to verify that the panel is open. In the event of an unsuccessful query, we should then always report that the LVDS panel is connected. This was only the case for gen2/3, later generations leaked the return value from the panel probe instead. Reported-and-tested-by: Alessandro Suardi Signed-off-by: Chris Wilson Reviewed-by: Keith Packard --- drivers/gpu/drm/i915/intel_lvds.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 1a311ad01116..86cd30bcb619 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -473,19 +473,13 @@ static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector, bool force) { struct drm_device *dev = connector->dev; - enum drm_connector_status status = connector_status_connected; + enum drm_connector_status status; status = intel_panel_detect(dev); if (status != connector_status_unknown) return status; - /* ACPI lid methods were generally unreliable in this generation, so - * don't even bother. - */ - if (IS_GEN2(dev) || IS_GEN3(dev)) - return connector_status_connected; - - return status; + return connector_status_connected; } /** From 63a8588debd4dc72becb9e27add9343c76301c7d Mon Sep 17 00:00:00 2001 From: Marc-Antoine Perennou Date: Thu, 24 Mar 2011 14:51:21 -0300 Subject: [PATCH 003/135] Bluetooth: add support for Apple MacBook Pro 8,2 Just adding the vendor details makes it work fine. Signed-off-by: Marc-Antoine Perennou Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 866811428e20..2af2e770f4bd 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -71,6 +71,9 @@ static struct usb_device_id btusb_table[] = { /* Apple MacBookAir3,1, MacBookAir3,2 */ { USB_DEVICE(0x05ac, 0x821b) }, + /* Apple MacBookPro8,2 */ + { USB_DEVICE(0x05ac, 0x821a) }, + /* AVM BlueFRITZ! USB v2.0 */ { USB_DEVICE(0x057c, 0x3800) }, From 52cb1c0d208565d8f06b743cdc6596d744f92e3b Mon Sep 17 00:00:00 2001 From: Suraj Sumangala Date: Wed, 9 Mar 2011 14:44:05 +0530 Subject: [PATCH 004/135] Bluetooth: Increment unacked_frames count only the first transmit This patch lets 'l2cap_pinfo.unacked_frames' be incremented only the first time a frame is transmitted. Previously it was being incremented for retransmitted packets too resulting the value to cross the transmit window size. Signed-off-by: Suraj Sumangala Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index c9f9cecca527..ca27f3a41536 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1116,7 +1116,9 @@ int l2cap_ertm_send(struct sock *sk) bt_cb(skb)->tx_seq = pi->next_tx_seq; pi->next_tx_seq = (pi->next_tx_seq + 1) % 64; - pi->unacked_frames++; + if (bt_cb(skb)->retries == 1) + pi->unacked_frames++; + pi->frames_sent++; if (skb_queue_is_last(TX_QUEUE(sk), skb)) From f630cf0d5434e3923e1b8226ffa2753ead6b0ce5 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Wed, 16 Mar 2011 15:36:29 -0300 Subject: [PATCH 005/135] Bluetooth: Fix HCI_RESET command synchronization We can't send new commands before a cmd_complete for the HCI_RESET command shows up. Reported-by: Mikko Vinni Reported-by: Justin P. Mattock Reported-by: Ed Tomlinson Signed-off-by: Gustavo F. Padovan Tested-by: Justin P. Mattock Tested-by: Mikko Vinni Tested-by: Ed Tomlinson --- include/net/bluetooth/hci.h | 2 ++ net/bluetooth/hci_core.c | 6 +++++- net/bluetooth/hci_event.c | 4 +++- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index ec6acf2f1c0b..2c0d309c7381 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -84,6 +84,8 @@ enum { HCI_SERVICE_CACHE, HCI_LINK_KEYS, HCI_DEBUG_KEYS, + + HCI_RESET, }; /* HCI ioctl defines */ diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index b372fb8bcdcf..92b48e257b89 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -186,6 +186,7 @@ static void hci_reset_req(struct hci_dev *hdev, unsigned long opt) BT_DBG("%s %ld", hdev->name, opt); /* Reset device */ + set_bit(HCI_RESET, &hdev->flags); hci_send_cmd(hdev, HCI_OP_RESET, 0, NULL); } @@ -213,8 +214,10 @@ static void hci_init_req(struct hci_dev *hdev, unsigned long opt) /* Mandatory initialization */ /* Reset */ - if (!test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks)) + if (!test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks)) { + set_bit(HCI_RESET, &hdev->flags); hci_send_cmd(hdev, HCI_OP_RESET, 0, NULL); + } /* Read Local Supported Features */ hci_send_cmd(hdev, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); @@ -1074,6 +1077,7 @@ static void hci_cmd_timer(unsigned long arg) BT_ERR("%s command tx timeout", hdev->name); atomic_set(&hdev->cmd_cnt, 1); + clear_bit(HCI_RESET, &hdev->flags); tasklet_schedule(&hdev->cmd_task); } diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 3fbfa50c2bff..cebe7588469f 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -183,6 +183,8 @@ static void hci_cc_reset(struct hci_dev *hdev, struct sk_buff *skb) BT_DBG("%s status 0x%x", hdev->name, status); + clear_bit(HCI_RESET, &hdev->flags); + hci_req_complete(hdev, HCI_OP_RESET, status); } @@ -1847,7 +1849,7 @@ static inline void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb) if (ev->opcode != HCI_OP_NOP) del_timer(&hdev->cmd_timer); - if (ev->ncmd) { + if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) { atomic_set(&hdev->cmd_cnt, 1); if (!skb_queue_empty(&hdev->cmd_q)) tasklet_schedule(&hdev->cmd_task); From 8763b4da41132e2d5a896cd5e629c3c0a652205e Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Mon, 14 Mar 2011 18:20:33 -0300 Subject: [PATCH 006/135] Bluetooth: Fix sending LE data over USB Now that we have support for LE connections, before discarding a frame we must check if there's a LE connection over that transport. Signed-off-by: Vinicius Costa Gomes Acked-by: Ville Tervo Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/btusb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 2af2e770f4bd..762a5109c68a 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -693,7 +693,8 @@ static int btusb_send_frame(struct sk_buff *skb) break; case HCI_ACLDATA_PKT: - if (!data->bulk_tx_ep || hdev->conn_hash.acl_num < 1) + if (!data->bulk_tx_ep || (hdev->conn_hash.acl_num < 1 && + hdev->conn_hash.le_num < 1)) return -ENODEV; urb = usb_alloc_urb(0, GFP_ATOMIC); From 6994ca5e8ade57d18b7d1e05aad040c441a2ad37 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 16 Mar 2011 14:29:34 +0200 Subject: [PATCH 007/135] Bluetooth: Fix missing hci_dev_lock_bh in user_confirm_reply The code was correctly calling _unlock at the end of the function but there was no actual _lock call anywhere. Signed-off-by: Johan Hedberg Signed-off-by: Gustavo F. Padovan --- net/bluetooth/mgmt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 0054c74e27b7..4476d8e3c0f2 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1230,6 +1230,8 @@ static int user_confirm_reply(struct sock *sk, u16 index, unsigned char *data, if (!hdev) return cmd_status(sk, index, mgmt_op, ENODEV); + hci_dev_lock_bh(hdev); + if (!test_bit(HCI_UP, &hdev->flags)) { err = cmd_status(sk, index, mgmt_op, ENETDOWN); goto failed; From a0cc9a1b5712ea52aaa4e7abfa0ec2dbe0d820ff Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 24 Mar 2011 17:16:08 +0200 Subject: [PATCH 008/135] Bluetooth: delete hanging L2CAP channel Sometimes L2CAP connection remains hanging. Make sure that L2CAP channel is deleted. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap_sock.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index fc85e7ae33c7..f77308e63e58 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -923,8 +923,9 @@ void __l2cap_sock_close(struct sock *sk, int reason) rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO); l2cap_send_cmd(conn, l2cap_pi(sk)->ident, L2CAP_CONN_RSP, sizeof(rsp), &rsp); - } else - l2cap_chan_del(sk, reason); + } + + l2cap_chan_del(sk, reason); break; case BT_CONNECT: From b77dcf8460ae57d4eb9fd3633eb4f97b8fb20716 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 24 Mar 2011 20:16:42 +0100 Subject: [PATCH 009/135] Bluetooth: Fix warning with hci_cmd_timer After we made debugobjects working again, we got the following: WARNING: at lib/debugobjects.c:262 debug_print_object+0x8e/0xb0() Hardware name: System Product Name ODEBUG: free active (active state 0) object type: timer_list hint: hci_cmd_timer+0x0/0x60 Pid: 2125, comm: dmsetup Tainted: G W 2.6.38-06707-gc62b389 #110375 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x46/0x50 [] debug_print_object+0x8e/0xb0 [] ? hci_cmd_timer+0x0/0x60 [] debug_check_no_obj_freed+0x125/0x230 [] ? check_object+0xb3/0x2b0 [] kfree+0x150/0x190 [] ? bt_host_release+0x16/0x20 [] bt_host_release+0x16/0x20 [] device_release+0x27/0xa0 [] kobject_release+0x4c/0xa0 [] ? kobject_release+0x0/0xa0 [] kref_put+0x36/0x70 [] kobject_put+0x27/0x60 [] put_device+0x17/0x20 [] hci_free_dev+0x29/0x30 [] vhci_release+0x36/0x70 [] fput+0xd6/0x1f0 [] filp_close+0x66/0x90 [] sys_close+0x99/0xf0 [] system_call_fastpath+0x16/0x1b That timer was introduced with commit 6bd32326cda(Bluetooth: Use proper timer for hci command timout) Timer seems to be running when the thing is closed. Removing the timer unconditionally fixes the problem. And yes, it needs to be fixed before the HCI_UP check. Signed-off-by: Thomas Gleixner Tested-by: Ingo Molnar Signed-off-by: Gustavo F. Padovan --- net/bluetooth/hci_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 92b48e257b89..2216620ff296 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -587,6 +587,9 @@ static int hci_dev_do_close(struct hci_dev *hdev) hci_req_cancel(hdev, ENODEV); hci_req_lock(hdev); + /* Stop timer, it might be running */ + del_timer_sync(&hdev->cmd_timer); + if (!test_and_clear_bit(HCI_UP, &hdev->flags)) { hci_req_unlock(hdev); return 0; @@ -626,7 +629,6 @@ static int hci_dev_do_close(struct hci_dev *hdev) /* Drop last sent command */ if (hdev->sent_cmd) { - del_timer_sync(&hdev->cmd_timer); kfree_skb(hdev->sent_cmd); hdev->sent_cmd = NULL; } From 7b824bbdd6210155bac9e1a1d795f94f8f2927b2 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sat, 26 Mar 2011 21:16:04 -0700 Subject: [PATCH 010/135] Input: wacom - constify wacom_features for a new missed Bamboo models Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 5597637cfd41..ba6e17c5e254 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1366,23 +1366,23 @@ static const struct wacom_features wacom_features_0xE3 = { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG }; static const struct wacom_features wacom_features_0x47 = { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS }; -static struct wacom_features wacom_features_0xD0 = +static const struct wacom_features wacom_features_0xD0 = { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; -static struct wacom_features wacom_features_0xD1 = +static const struct wacom_features wacom_features_0xD1 = { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; -static struct wacom_features wacom_features_0xD2 = +static const struct wacom_features wacom_features_0xD2 = { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; -static struct wacom_features wacom_features_0xD3 = +static const struct wacom_features wacom_features_0xD3 = { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; static const struct wacom_features wacom_features_0xD4 = { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, 63, BAMBOO_PT }; -static struct wacom_features wacom_features_0xD6 = +static const struct wacom_features wacom_features_0xD6 = { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; -static struct wacom_features wacom_features_0xD7 = +static const struct wacom_features wacom_features_0xD7 = { "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; -static struct wacom_features wacom_features_0xD8 = +static const struct wacom_features wacom_features_0xD8 = { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; -static struct wacom_features wacom_features_0xDA = +static const struct wacom_features wacom_features_0xDA = { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; static struct wacom_features wacom_features_0xDB = { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; From e35fb8c1db2d6fc92783d492e458d19b06502742 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sat, 26 Mar 2011 21:16:05 -0700 Subject: [PATCH 011/135] Input: wacom - report resolution for pen devices Touch resolution is reported to the userland by retrieving the value from the HID descriptor. But pen resolution is not since it can not be retrieved. The current Wacom X driver has a resolution table. To centralize the source of these values, the resolution entries are added in the wacom_features struct for x and y coordinates respectively. The values are then reported to the userland. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 271 ++++++++++++++++++++----------- drivers/input/tablet/wacom_wac.h | 2 + 2 files changed, 181 insertions(+), 92 deletions(-) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index ba6e17c5e254..c87d94ff6ae4 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -16,6 +16,14 @@ #include "wacom.h" #include +/* resolution for penabled devices */ +#define WACOM_PL_RES 20 +#define WACOM_PENPRTN_RES 40 +#define WACOM_VOLITO_RES 50 +#define WACOM_GRAPHIRE_RES 80 +#define WACOM_INTUOS_RES 100 +#define WACOM_INTUOS3_RES 200 + static int wacom_penpartner_irq(struct wacom_wac *wacom) { unsigned char *data = wacom->data; @@ -1055,6 +1063,19 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, features->pressure_fuzz, 0); + if (features->device_type == BTN_TOOL_PEN) { + /* penabled devices have fixed resolution for each model */ + input_abs_set_res(input_dev, ABS_X, features->x_resolution); + input_abs_set_res(input_dev, ABS_Y, features->y_resolution); + } else { + input_abs_set_res(input_dev, ABS_X, + wacom_calculate_touch_res(features->x_max, + features->x_phy)); + input_abs_set_res(input_dev, ABS_Y, + wacom_calculate_touch_res(features->y_max, + features->y_phy)); + } + __set_bit(ABS_MISC, input_dev->absbit); switch (wacom_wac->features.type) { @@ -1171,15 +1192,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, case TABLETPC: __clear_bit(ABS_MISC, input_dev->absbit); - if (features->device_type != BTN_TOOL_PEN) { - input_abs_set_res(input_dev, ABS_X, - wacom_calculate_touch_res(features->x_max, - features->x_phy)); - input_abs_set_res(input_dev, ABS_Y, - wacom_calculate_touch_res(features->y_max, - features->y_phy)); + if (features->device_type != BTN_TOOL_PEN) break; /* no need to process stylus stuff */ - } + /* fall through */ case PL: @@ -1216,12 +1231,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, features->pressure_max, features->pressure_fuzz, 0); - input_abs_set_res(input_dev, ABS_X, - wacom_calculate_touch_res(features->x_max, - features->x_phy)); - input_abs_set_res(input_dev, ABS_Y, - wacom_calculate_touch_res(features->y_max, - features->y_phy)); } else if (features->device_type == BTN_TOOL_PEN) { __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_TOOL_PEN, input_dev->keybit); @@ -1233,161 +1242,239 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, } static const struct wacom_features wacom_features_0x00 = - { "Wacom Penpartner", WACOM_PKGLEN_PENPRTN, 5040, 3780, 255, 0, PENPARTNER }; + { "Wacom Penpartner", WACOM_PKGLEN_PENPRTN, 5040, 3780, 255, + 0, PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; static const struct wacom_features wacom_features_0x10 = - { "Wacom Graphire", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, 63, GRAPHIRE }; + { "Wacom Graphire", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, + 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x11 = - { "Wacom Graphire2 4x5", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, 63, GRAPHIRE }; + { "Wacom Graphire2 4x5", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, + 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x12 = - { "Wacom Graphire2 5x7", WACOM_PKGLEN_GRAPHIRE, 13918, 10206, 511, 63, GRAPHIRE }; + { "Wacom Graphire2 5x7", WACOM_PKGLEN_GRAPHIRE, 13918, 10206, 511, + 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x13 = - { "Wacom Graphire3", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, 63, GRAPHIRE }; + { "Wacom Graphire3", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, + 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x14 = - { "Wacom Graphire3 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, GRAPHIRE }; + { "Wacom Graphire3 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, + 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x15 = - { "Wacom Graphire4 4x5", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, 63, WACOM_G4 }; + { "Wacom Graphire4 4x5", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, + 63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x16 = - { "Wacom Graphire4 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, WACOM_G4 }; + { "Wacom Graphire4 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, + 63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x17 = - { "Wacom BambooFun 4x5", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, 63, WACOM_MO }; + { "Wacom BambooFun 4x5", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, + 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x18 = - { "Wacom BambooFun 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 511, 63, WACOM_MO }; + { "Wacom BambooFun 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 511, + 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x19 = - { "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, GRAPHIRE }; + { "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, + 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x60 = - { "Wacom Volito", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE }; + { "Wacom Volito", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, + 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x61 = - { "Wacom PenStation2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 255, 63, GRAPHIRE }; + { "Wacom PenStation2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 255, + 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x62 = - { "Wacom Volito2 4x5", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE }; + { "Wacom Volito2 4x5", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, + 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x63 = - { "Wacom Volito2 2x3", WACOM_PKGLEN_GRAPHIRE, 3248, 2320, 511, 63, GRAPHIRE }; + { "Wacom Volito2 2x3", WACOM_PKGLEN_GRAPHIRE, 3248, 2320, 511, + 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x64 = - { "Wacom PenPartner2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 511, 63, GRAPHIRE }; + { "Wacom PenPartner2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 511, + 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x65 = - { "Wacom Bamboo", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, 63, WACOM_MO }; + { "Wacom Bamboo", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, + 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x69 = - { "Wacom Bamboo1", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE }; + { "Wacom Bamboo1", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, + 63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; static const struct wacom_features wacom_features_0x20 = - { "Wacom Intuos 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, 31, INTUOS }; + { "Wacom Intuos 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x21 = - { "Wacom Intuos 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS }; + { "Wacom Intuos 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x22 = - { "Wacom Intuos 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, 31, INTUOS }; + { "Wacom Intuos 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x23 = - { "Wacom Intuos 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, 31, INTUOS }; + { "Wacom Intuos 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x24 = - { "Wacom Intuos 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, 31, INTUOS }; + { "Wacom Intuos 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x30 = - { "Wacom PL400", WACOM_PKGLEN_GRAPHIRE, 5408, 4056, 255, 0, PL }; + { "Wacom PL400", WACOM_PKGLEN_GRAPHIRE, 5408, 4056, 255, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x31 = - { "Wacom PL500", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 255, 0, PL }; + { "Wacom PL500", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 255, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x32 = - { "Wacom PL600", WACOM_PKGLEN_GRAPHIRE, 6126, 4604, 255, 0, PL }; + { "Wacom PL600", WACOM_PKGLEN_GRAPHIRE, 6126, 4604, 255, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x33 = - { "Wacom PL600SX", WACOM_PKGLEN_GRAPHIRE, 6260, 5016, 255, 0, PL }; + { "Wacom PL600SX", WACOM_PKGLEN_GRAPHIRE, 6260, 5016, 255, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x34 = - { "Wacom PL550", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 511, 0, PL }; + { "Wacom PL550", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 511, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x35 = - { "Wacom PL800", WACOM_PKGLEN_GRAPHIRE, 7220, 5780, 511, 0, PL }; + { "Wacom PL800", WACOM_PKGLEN_GRAPHIRE, 7220, 5780, 511, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x37 = - { "Wacom PL700", WACOM_PKGLEN_GRAPHIRE, 6758, 5406, 511, 0, PL }; + { "Wacom PL700", WACOM_PKGLEN_GRAPHIRE, 6758, 5406, 511, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x38 = - { "Wacom PL510", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, 0, PL }; + { "Wacom PL510", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x39 = - { "Wacom DTU710", WACOM_PKGLEN_GRAPHIRE, 34080, 27660, 511, 0, PL }; + { "Wacom DTU710", WACOM_PKGLEN_GRAPHIRE, 34080, 27660, 511, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0xC4 = - { "Wacom DTF521", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, 0, PL }; + { "Wacom DTF521", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0xC0 = - { "Wacom DTF720", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, 0, PL }; + { "Wacom DTF720", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0xC2 = - { "Wacom DTF720a", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, 0, PL }; + { "Wacom DTF720a", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, + 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x03 = - { "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE, 20480, 15360, 511, 0, PTU }; + { "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE, 20480, 15360, 511, + 0, PTU, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x41 = - { "Wacom Intuos2 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, 31, INTUOS }; + { "Wacom Intuos2 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x42 = - { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS }; + { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x43 = - { "Wacom Intuos2 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, 31, INTUOS }; + { "Wacom Intuos2 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x44 = - { "Wacom Intuos2 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, 31, INTUOS }; + { "Wacom Intuos2 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x45 = - { "Wacom Intuos2 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, 31, INTUOS }; + { "Wacom Intuos2 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xB0 = - { "Wacom Intuos3 4x5", WACOM_PKGLEN_INTUOS, 25400, 20320, 1023, 63, INTUOS3S }; + { "Wacom Intuos3 4x5", WACOM_PKGLEN_INTUOS, 25400, 20320, 1023, + 63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB1 = - { "Wacom Intuos3 6x8", WACOM_PKGLEN_INTUOS, 40640, 30480, 1023, 63, INTUOS3 }; + { "Wacom Intuos3 6x8", WACOM_PKGLEN_INTUOS, 40640, 30480, 1023, + 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB2 = - { "Wacom Intuos3 9x12", WACOM_PKGLEN_INTUOS, 60960, 45720, 1023, 63, INTUOS3 }; + { "Wacom Intuos3 9x12", WACOM_PKGLEN_INTUOS, 60960, 45720, 1023, + 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB3 = - { "Wacom Intuos3 12x12", WACOM_PKGLEN_INTUOS, 60960, 60960, 1023, 63, INTUOS3L }; + { "Wacom Intuos3 12x12", WACOM_PKGLEN_INTUOS, 60960, 60960, 1023, + 63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB4 = - { "Wacom Intuos3 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 1023, 63, INTUOS3L }; + { "Wacom Intuos3 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 1023, + 63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB5 = - { "Wacom Intuos3 6x11", WACOM_PKGLEN_INTUOS, 54204, 31750, 1023, 63, INTUOS3 }; + { "Wacom Intuos3 6x11", WACOM_PKGLEN_INTUOS, 54204, 31750, 1023, + 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB7 = - { "Wacom Intuos3 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 1023, 63, INTUOS3S }; + { "Wacom Intuos3 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 1023, + 63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB8 = - { "Wacom Intuos4 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, 63, INTUOS4S }; + { "Wacom Intuos4 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, + 63, INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB9 = - { "Wacom Intuos4 6x9", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, 63, INTUOS4 }; + { "Wacom Intuos4 6x9", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, + 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBA = - { "Wacom Intuos4 8x13", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, 63, INTUOS4L }; + { "Wacom Intuos4 8x13", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, + 63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBB = - { "Wacom Intuos4 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 2047, 63, INTUOS4L }; + { "Wacom Intuos4 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 2047, + 63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBC = - { "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047, 63, INTUOS4 }; + { "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047, + 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x3F = - { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, 63, CINTIQ }; + { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, + 63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xC5 = - { "Wacom Cintiq 20WSX", WACOM_PKGLEN_INTUOS, 86680, 54180, 1023, 63, WACOM_BEE }; + { "Wacom Cintiq 20WSX", WACOM_PKGLEN_INTUOS, 86680, 54180, 1023, + 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xC6 = - { "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, 63, WACOM_BEE }; + { "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, + 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xC7 = - { "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, 0, PL }; + { "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, + 0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xCE = - { "Wacom DTU2231", WACOM_PKGLEN_GRAPHIRE, 47864, 27011, 511, 0, DTU }; + { "Wacom DTU2231", WACOM_PKGLEN_GRAPHIRE, 47864, 27011, 511, + 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xF0 = - { "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511, 0, DTU }; + { "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511, + 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xCC = - { "Wacom Cintiq 21UX2", WACOM_PKGLEN_INTUOS, 87200, 65600, 2047, 63, WACOM_21UX2 }; + { "Wacom Cintiq 21UX2", WACOM_PKGLEN_INTUOS, 87200, 65600, 2047, + 63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x90 = - { "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC }; + { "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, + 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x93 = - { "Wacom ISDv4 93", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC }; + { "Wacom ISDv4 93", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, + 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x9A = - { "Wacom ISDv4 9A", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC }; + { "Wacom ISDv4 9A", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, + 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x9F = - { "Wacom ISDv4 9F", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC }; + { "Wacom ISDv4 9F", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, + 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xE2 = - { "Wacom ISDv4 E2", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG }; + { "Wacom ISDv4 E2", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, + 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xE3 = - { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG }; + { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, + 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x47 = - { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS }; + { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, + 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD0 = - { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; + { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD1 = - { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; + { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD2 = - { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; + { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD3 = - { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; + { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD4 = - { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, 63, BAMBOO_PT }; + { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD6 = - { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; + { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD7 = - { "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; + { "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD8 = - { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; + { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xDA = - { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; + { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static struct wacom_features wacom_features_0xDB = - { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; + { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x6004 = - { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255, 0, TABLETPC }; + { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255, + 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; #define USB_DEVICE_WACOM(prod) \ USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 835f756b150c..53eb71b68330 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -74,6 +74,8 @@ struct wacom_features { int pressure_max; int distance_max; int type; + int x_resolution; + int y_resolution; int device_type; int x_phy; int y_phy; From d51ca07634b8a441f731e087e93775a67d629a8c Mon Sep 17 00:00:00 2001 From: Sylvestre Ledru Date: Sat, 26 Mar 2011 22:52:25 -0700 Subject: [PATCH 012/135] Input: h3600_ts_input - fix a spelling error Signed-off-by: Sylvestre Ledru Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/h3600_ts_input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c index b4d7f63deff1..efa06882de00 100644 --- a/drivers/input/touchscreen/h3600_ts_input.c +++ b/drivers/input/touchscreen/h3600_ts_input.c @@ -62,7 +62,7 @@ MODULE_LICENSE("GPL"); Programmer has no control over these numbers. TODO there are holes - specifically 1,7,0x0a */ -#define VERSION_ID 0 /* Get Version (request/respose) */ +#define VERSION_ID 0 /* Get Version (request/response) */ #define KEYBD_ID 2 /* Keyboard (event) */ #define TOUCHS_ID 3 /* Touch Screen (event)*/ #define EEPROM_READ_ID 4 /* (request/response) */ From ccd0d44fad38dc1bb4b26dcc7a30e9f2c3b36870 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 25 Mar 2011 16:21:06 -0400 Subject: [PATCH 013/135] WARN_ON_SMP(): Add comment to explain ({0;}) The define to use ({0;}) for the !CONFIG_SMP case of WARN_ON_SMP() can be confusing. As the WARN_ON_SMP() needs to be a nop when CONFIG_SMP is not set, including all its parameters must not be evaluated, and that it must work as both a stand alone statement and inside an if condition, we define it to a funky ({0;}). A simple "0" will not work as it causes gcc to give the warning that the statement has no effect. As this strange definition has raised a few eyebrows from some major kernel developers, it is wise to document why we create such a work of art. Cc: Linus Torvalds Cc: Alexey Dobriyan Signed-off-by: Steven Rostedt --- include/asm-generic/bug.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index f2d2faf4d9ae..e5a3f5880001 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -194,6 +194,13 @@ extern void warn_slowpath_null(const char *file, const int line); #ifdef CONFIG_SMP # define WARN_ON_SMP(x) WARN_ON(x) #else +/* + * Use of ({0;}) because WARN_ON_SMP(x) may be used either as + * a stand alone line statement or as a condition in an if () + * statement. + * A simple "0" would cause gcc to give a "statement has no effect" + * warning. + */ # define WARN_ON_SMP(x) ({0;}) #endif From 6c6804fb2cef2d6aceb38b0eb0803210d77ff390 Mon Sep 17 00:00:00 2001 From: Andrew Lutomirski Date: Thu, 24 Mar 2011 00:36:56 -0400 Subject: [PATCH 014/135] perf symbols: Fix vsyscall symbol lookup Perf can't currently trace into the vsyscall page. It looks like it was meant to work. Tested on 2.6.38 and today's -git. The bug is easy to reproduce. Compile this: int main() { int i; struct timespec t; for(i = 0; i < 10000000; i++) clock_gettime(CLOCK_MONOTONIC, &t); return 0; } and run it through perf record; perf report. The top entry shows "[unknown]" and you can't zoom in. It looks like there are two issues. The first is a that a test for user mode executing in kernel space is backwards. (That's the first hunk below). The second (I think) is that something's wrong with the code that generates lots of little struct dso objects for different sections -- when it runs on vmlinux it results in bogus long_name values which cause objdump to fail. Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra LPU-Reference: Signed-off-by: Andy Lutomirski Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/event.c | 2 +- tools/perf/util/symbol.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index 2b15c362ef56..1023f67633a4 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -710,7 +710,7 @@ try_again: * in the whole kernel symbol list. */ if ((long long)al->addr < 0 && - cpumode == PERF_RECORD_MISC_KERNEL && + cpumode == PERF_RECORD_MISC_USER && machine && mg != &machine->kmaps) { mg = &machine->kmaps; goto try_again; diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 17df793c8924..8f73907a959e 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -1196,6 +1196,8 @@ static int dso__load_sym(struct dso *self, struct map *map, const char *name, if (curr_dso == NULL) goto out_elf_end; curr_dso->kernel = self->kernel; + curr_dso->long_name = self->long_name; + curr_dso->long_name_len = self->long_name_len; curr_map = map__new2(start, curr_dso, map->type); if (curr_map == NULL) { @@ -1842,6 +1844,7 @@ int dso__load_vmlinux(struct dso *self, struct map *map, if (fd < 0) return -1; + dso__set_long_name(self, (char *)vmlinux); dso__set_loaded(self, map->type); err = dso__load_sym(self, map, symfs_vmlinux, fd, filter, 0, 0); close(fd); From 4dc217df68a17a57f8464c74c1b4785e40bddf77 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 25 Mar 2011 15:30:38 +0100 Subject: [PATCH 015/135] mac80211: fix a crash in minstrel_ht in HT mode with no supported MCS rates When a client connects in HT mode but does not provide any valid MCS rates, the function that finds the next sample rate gets stuck in an infinite loop. Fix this by falling back to legacy rates if no usable MCS rates are found. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- net/mac80211/rc80211_minstrel_ht.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 8212a8bebf06..dbdebeda097f 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -659,18 +659,14 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_mcs_info *mcs = &sta->ht_cap.mcs; struct ieee80211_local *local = hw_to_local(mp->hw); u16 sta_cap = sta->ht_cap.cap; + int n_supported = 0; int ack_dur; int stbc; int i; /* fall back to the old minstrel for legacy stations */ - if (!sta->ht_cap.ht_supported) { - msp->is_ht = false; - memset(&msp->legacy, 0, sizeof(msp->legacy)); - msp->legacy.r = msp->ratelist; - msp->legacy.sample_table = msp->sample_table; - return mac80211_minstrel.rate_init(priv, sband, sta, &msp->legacy); - } + if (!sta->ht_cap.ht_supported) + goto use_legacy; BUILD_BUG_ON(ARRAY_SIZE(minstrel_mcs_groups) != MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS); @@ -725,7 +721,22 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, mi->groups[i].supported = mcs->rx_mask[minstrel_mcs_groups[i].streams - 1]; + + if (mi->groups[i].supported) + n_supported++; } + + if (!n_supported) + goto use_legacy; + + return; + +use_legacy: + msp->is_ht = false; + memset(&msp->legacy, 0, sizeof(msp->legacy)); + msp->legacy.r = msp->ratelist; + msp->legacy.sample_table = msp->sample_table; + return mac80211_minstrel.rate_init(priv, sband, sta, &msp->legacy); } static void From f62d816fc4324afbb7cf90110c70b6a14139b225 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 25 Mar 2011 17:43:41 +0100 Subject: [PATCH 016/135] ath9k: fix a chip wakeup related crash in ath9k_start When the chip is still asleep when ath9k_start is called, ath9k_hw_configpcipowersave can trigger a data bus error. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 524825720a09..dddb85de622d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1048,6 +1048,8 @@ static int ath9k_start(struct ieee80211_hw *hw) "Starting driver with initial channel: %d MHz\n", curchan->center_freq); + ath9k_ps_wakeup(sc); + mutex_lock(&sc->mutex); /* setup initial channel */ @@ -1143,6 +1145,8 @@ static int ath9k_start(struct ieee80211_hw *hw) mutex_unlock: mutex_unlock(&sc->mutex); + ath9k_ps_restore(sc); + return r; } From 1f951a7f8ba05192291f781ef99a892697e47d62 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Petr=20=C5=A0tetiar?= Date: Sun, 27 Mar 2011 13:31:26 +0200 Subject: [PATCH 017/135] mac80211: fix NULL pointer dereference in ieee80211_key_alloc() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ieee80211_key struct can be kfree()d several times in the function, for example if some of the key setup functions fails beforehand, but there's no check if the struct is still valid before we call memcpy() and INIT_LIST_HEAD() on it. In some cases (like it was in my case), if there's missing aes-generic module it could lead to the following kernel OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000018c .... PC is at memcpy+0x80/0x29c ... Backtrace: [] (ieee80211_key_alloc+0x0/0x234 [mac80211]) from [] (ieee80211_add_key+0x70/0x12c [mac80211]) [] (ieee80211_add_key+0x0/0x12c [mac80211]) from [] (__cfg80211_set_encryption+0x2a8/0x464 [cfg80211]) Signed-off-by: Petr Štetiar Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/key.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 8c02469b7176..09cf1f28c12b 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -342,7 +342,7 @@ struct ieee80211_key *ieee80211_key_alloc(u32 cipher, int idx, size_t key_len, if (IS_ERR(key->u.ccmp.tfm)) { err = PTR_ERR(key->u.ccmp.tfm); kfree(key); - key = ERR_PTR(err); + return ERR_PTR(err); } break; case WLAN_CIPHER_SUITE_AES_CMAC: @@ -360,7 +360,7 @@ struct ieee80211_key *ieee80211_key_alloc(u32 cipher, int idx, size_t key_len, if (IS_ERR(key->u.aes_cmac.tfm)) { err = PTR_ERR(key->u.aes_cmac.tfm); kfree(key); - key = ERR_PTR(err); + return ERR_PTR(err); } break; } From 67aa030c0dff6095128bcb4e8043b48360f32331 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Sat, 26 Mar 2011 18:58:51 +0100 Subject: [PATCH 018/135] mac80211: fix possible NULL pointer dereference This patch moves 'key' dereference after BUG_ON(!key) so that when key is NULL we will see proper trace instead of oops. Signed-off-by: Mariusz Kozlowski Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/key.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 09cf1f28c12b..af3c56482c80 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -400,11 +400,12 @@ int ieee80211_key_link(struct ieee80211_key *key, { struct ieee80211_key *old_key; int idx, ret; - bool pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE; + bool pairwise; BUG_ON(!sdata); BUG_ON(!key); + pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE; idx = key->conf.keyidx; key->local = sdata->local; key->sdata = sdata; From bef9bacc4ec7ea6a02876164cd6ccaa4759edce4 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Sat, 26 Mar 2011 19:26:55 +0100 Subject: [PATCH 019/135] cfg80211:: fix possible NULL pointer dereference In cfg80211_inform_bss_frame() wiphy is first dereferenced on privsz initialisation and then it is checked for NULL. This patch fixes that. Signed-off-by: Mariusz Kozlowski Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/scan.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index ea427f418f64..300c11d99997 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -585,16 +585,23 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, struct cfg80211_internal_bss *res; size_t ielen = len - offsetof(struct ieee80211_mgmt, u.probe_resp.variable); - size_t privsz = wiphy->bss_priv_size; + size_t privsz; + + if (WARN_ON(!mgmt)) + return NULL; + + if (WARN_ON(!wiphy)) + return NULL; if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && (signal < 0 || signal > 100))) return NULL; - if (WARN_ON(!mgmt || !wiphy || - len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable))) + if (WARN_ON(len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable))) return NULL; + privsz = wiphy->bss_priv_size; + res = kzalloc(sizeof(*res) + privsz + ielen, gfp); if (!res) return NULL; From 2b78ac9bfc7483ba4bda9ad3d10dd4afcf88337c Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Mon, 28 Mar 2011 14:32:32 +0300 Subject: [PATCH 020/135] cfg80211: fix BSS double-unlinking (continued) This patch adds to the fix "fix BSS double-unlinking" (commit 3207390a8b58bfc1335750f91cf6783c48ca19ca) by Johannes Berg. It turns out, that the double-unlinking scenario can also occur if expired BSS elements are removed whilst an interface is performing association. To work around that, replace list_del with list_del_init also in the "cfg80211_bss_expire" function, so that the check for whether the BSS still is in the list works correctly in cfg80211_unlink_bss. Signed-off-by: Juuso Oikarinen Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/scan.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 300c11d99997..fbf6f33ae4d0 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -123,6 +123,15 @@ void cfg80211_bss_age(struct cfg80211_registered_device *dev, } } +/* must hold dev->bss_lock! */ +static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *bss) +{ + list_del_init(&bss->list); + rb_erase(&bss->rbn, &dev->bss_tree); + kref_put(&bss->ref, bss_release); +} + /* must hold dev->bss_lock! */ void cfg80211_bss_expire(struct cfg80211_registered_device *dev) { @@ -134,9 +143,7 @@ void cfg80211_bss_expire(struct cfg80211_registered_device *dev) continue; if (!time_after(jiffies, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE)) continue; - list_del(&bss->list); - rb_erase(&bss->rbn, &dev->bss_tree); - kref_put(&bss->ref, bss_release); + __cfg80211_unlink_bss(dev, bss); expired = true; } @@ -669,11 +676,8 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) spin_lock_bh(&dev->bss_lock); if (!list_empty(&bss->list)) { - list_del_init(&bss->list); + __cfg80211_unlink_bss(dev, bss); dev->bss_generation++; - rb_erase(&bss->rbn, &dev->bss_tree); - - kref_put(&bss->ref, bss_release); } spin_unlock_bh(&dev->bss_lock); } From 499fe9a419d43410be576bcc825658997b6ce822 Mon Sep 17 00:00:00 2001 From: Daniel Halperin Date: Thu, 24 Mar 2011 16:01:48 -0700 Subject: [PATCH 021/135] mac80211: fix aggregation frame release during timeout Suppose the aggregation reorder buffer looks like this: x-T-R1-y-R2, where x and y are frames that have not been received, T is a received frame that has timed out, and R1,R2 are received frames that have not yet timed out. The proper behavior in this scenario is to move the window past x (skipping it), release T and R1, and leave the window at y until y is received or R2 times out. As written, this code will instead leave the window at R1, because it has not yet timed out. Fix this by exiting the reorder loop only when the frame that has not timed out AND there are skipped frames earlier in the current valid window. Signed-off-by: Daniel Halperin Signed-off-by: John W. Linville --- net/mac80211/rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 5c1930ba8ebe..aa5cc37b4921 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -612,7 +612,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw, skipped++; continue; } - if (!time_after(jiffies, tid_agg_rx->reorder_time[j] + + if (skipped && + !time_after(jiffies, tid_agg_rx->reorder_time[j] + HT_RX_REORDER_BUF_TIMEOUT)) goto set_release_timer; From f3cf5c4fedbe13880cd80a9fa1aebae79ebef20e Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Sat, 26 Mar 2011 22:53:34 -0700 Subject: [PATCH 022/135] Input: sparse-keymap - report scancodes with key events Scancodes are useful debugging aids when incorrect keycodes are being sent, as is common with laptop hotkeys. Signed-off-by: Seth Forshee Signed-off-by: Dmitry Torokhov --- drivers/input/sparse-keymap.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c index 337bf51bc984..74bca5d2f6dc 100644 --- a/drivers/input/sparse-keymap.c +++ b/drivers/input/sparse-keymap.c @@ -208,6 +208,11 @@ int sparse_keymap_setup(struct input_dev *dev, } } + if (test_bit(EV_KEY, dev->evbit)) { + __set_bit(EV_MSC, dev->evbit); + __set_bit(MSC_SCAN, dev->mscbit); + } + dev->keycode = map; dev->keycodemax = map_size; dev->getkeycode = sparse_keymap_getkeycode; @@ -268,6 +273,7 @@ void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *k { switch (ke->type) { case KE_KEY: + input_event(dev, EV_MSC, MSC_SCAN, ke->code); input_report_key(dev, ke->keycode, value); input_sync(dev); if (value && autorelease) { From 170531bae648c0ef8d56b44dc5bd8d67717b0db9 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Sat, 26 Mar 2011 22:53:34 -0700 Subject: [PATCH 023/135] Input: sparse-keymap - report KEY_UNKNOWN for unknown scan codes This allows for debugging non-functional keys easily from userspace. Signed-off-by: Seth Forshee Signed-off-by: Dmitry Torokhov --- drivers/input/sparse-keymap.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c index 74bca5d2f6dc..fdb6a3976f94 100644 --- a/drivers/input/sparse-keymap.c +++ b/drivers/input/sparse-keymap.c @@ -209,6 +209,7 @@ int sparse_keymap_setup(struct input_dev *dev, } if (test_bit(EV_KEY, dev->evbit)) { + __set_bit(KEY_UNKNOWN, dev->keybit); __set_bit(EV_MSC, dev->evbit); __set_bit(MSC_SCAN, dev->mscbit); } @@ -311,12 +312,19 @@ bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code, { const struct key_entry *ke = sparse_keymap_entry_from_scancode(dev, code); + struct key_entry unknown_ke; if (ke) { sparse_keymap_report_entry(dev, ke, value, autorelease); return true; } + /* Report an unknown key event as a debugging aid */ + unknown_ke.type = KE_KEY; + unknown_ke.code = code; + unknown_ke.keycode = KEY_UNKNOWN; + sparse_keymap_report_entry(dev, &unknown_ke, value, true); + return false; } EXPORT_SYMBOL(sparse_keymap_report_event); From ca444564a947034557a85357b3911d067cac4b8f Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 25 Mar 2011 15:20:14 +0100 Subject: [PATCH 024/135] x86: Stop including in two asm header files Stop including in x86 header files which don't need it. This will let the compiler complain when this header is not included by source files when it should, so that contributors can fix the problem before building on other architectures starts to fail. Credits go to Geert for the idea. Signed-off-by: Jean Delvare Cc: James E.J. Bottomley Cc: Geert Uytterhoeven Cc: Stephen Rothwell LKML-Reference: <20110325152014.297890ec@endymion.delvare> [ this also fixes an upstream build bug in drivers/media/rc/ite-cir.c ] Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 1 - arch/x86/include/asm/dma.h | 1 - arch/x86/kernel/apic/hw_nmi.c | 1 + arch/x86/kernel/apic/x2apic_uv_x.c | 1 + arch/x86/kernel/irq.c | 1 + arch/x86/kernel/reboot.c | 1 + arch/x86/platform/uv/tlb_uv.c | 1 + drivers/media/rc/ite-cir.c | 1 + drivers/scsi/ultrastor.c | 1 + 9 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index a279d98ea95e..2b7d573be549 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -2,7 +2,6 @@ #define _ASM_X86_APIC_H #include -#include #include #include diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h index 97b6d8114a43..057099e5faba 100644 --- a/arch/x86/include/asm/dma.h +++ b/arch/x86/include/asm/dma.h @@ -10,7 +10,6 @@ #include /* And spinlocks */ #include /* need byte IO */ -#include #ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER #define dma_outb outb_p diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c index c4e557a1ebb6..5260fe91bcb6 100644 --- a/arch/x86/kernel/apic/hw_nmi.c +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -16,6 +16,7 @@ #include #include #include +#include #ifdef CONFIG_HARDLOCKUP_DETECTOR u64 hw_nmi_get_sample_period(void) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 3c289281394c..d2cf39bc5ecf 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 948a31eae75f..1cb0b9fc78dc 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index d3ce37edb54d..08c44b08bf5b 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index a7b38d35c29a..7cb6424317f6 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c index ac0e42b47b2a..accaf6c9789a 100644 --- a/drivers/media/rc/ite-cir.c +++ b/drivers/media/rc/ite-cir.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "ite-cir.h" diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c index 0571ef9639cb..9f4b58b7daad 100644 --- a/drivers/scsi/ultrastor.c +++ b/drivers/scsi/ultrastor.c @@ -138,6 +138,7 @@ #include #include #include +#include #include #include From 4ac5fc6a3e4d90120f292526bcaa5ee182a7411b Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 29 Mar 2011 16:34:32 +0800 Subject: [PATCH 025/135] x86, microcode: Unregister syscore_ops after microcode unloaded Currently, microcode doesn't unregister syscore_ops after it's unloaded. So if we modprobe then rmmod microcode, the stale microcode syscore_ops info will stay on syscore_ops_list. Later when we're trying to reboot/halt/shutdown the machine, kernel will panic on syscore_shutdown(). With the patch applied, I can reboot/halt/shutdown my machine successfully. Signed-off-by: Xiaotian Feng Cc: Tigran Aivazian Cc: Rafael J. Wysocki LKML-Reference: <1301387672-23661-1-git-send-email-dfeng@redhat.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/microcode_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 5ed0ab549eb8..f9242800bc84 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -550,6 +550,7 @@ static void __exit microcode_exit(void) microcode_dev_exit(); unregister_hotcpu_notifier(&mc_cpu_notifier); + unregister_syscore_ops(&mc_syscore_ops); get_online_cpus(); mutex_lock(µcode_mutex); From c286c419c784c238cd699be37fec7a9acc30d89f Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 28 Mar 2011 09:50:11 -0300 Subject: [PATCH 026/135] perf tools: Fixup exit path when not able to open events We have to deal with the TUI mode in perf top, so that we don't end up with a garbled screen when, say, a non root user on a machine with a paranoid setting (the default) tries to use 'perf top'. Introduce a ui__warning_paranoid() routine shared by top and record that tells the user the valid values for /proc/sys/kernel/perf_event_paranoid. Cc: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi LKML-Reference: Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-record.c | 9 ++++----- tools/perf/builtin-top.c | 38 +++++++++++++++++++++++-------------- tools/perf/util/debug.c | 10 ++++++++++ tools/perf/util/debug.h | 1 + 4 files changed, 39 insertions(+), 19 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 6febcc168a8c..623695e18254 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -275,11 +275,10 @@ try_again: !no_inherit) < 0) { int err = errno; - if (err == EPERM || err == EACCES) - die("Permission error - are you root?\n" - "\t Consider tweaking" - " /proc/sys/kernel/perf_event_paranoid.\n"); - else if (err == ENODEV && cpu_list) { + if (err == EPERM || err == EACCES) { + ui__warning_paranoid(); + exit(EXIT_FAILURE); + } else if (err == ENODEV && cpu_list) { die("No such device - did you specify" " an out-of-range profile CPU?\n"); } else if (err == EINVAL && sample_id_all_avail) { diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 676b4fb0070f..935fc4fd878e 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -850,10 +850,10 @@ try_again: top.evlist->threads, group, inherit) < 0) { int err = errno; - if (err == EPERM || err == EACCES) - die("Permission error - are you root?\n" - "\t Consider tweaking" - " /proc/sys/kernel/perf_event_paranoid.\n"); + if (err == EPERM || err == EACCES) { + ui__warning_paranoid(); + goto out_err; + } /* * If it's cycles then fall back to hrtimer * based cpu-clock-tick sw counter, which @@ -861,25 +861,35 @@ try_again: */ if (attr->type == PERF_TYPE_HARDWARE && attr->config == PERF_COUNT_HW_CPU_CYCLES) { - if (verbose) - warning(" ... trying to fall back to cpu-clock-ticks\n"); + ui__warning("Cycles event not supported,\n" + "trying to fall back to cpu-clock-ticks\n"); attr->type = PERF_TYPE_SOFTWARE; attr->config = PERF_COUNT_SW_CPU_CLOCK; goto try_again; } - printf("\n"); - error("sys_perf_event_open() syscall returned with %d " - "(%s). /bin/dmesg may provide additional information.\n", - err, strerror(err)); - die("No CONFIG_PERF_EVENTS=y kernel support configured?\n"); - exit(-1); + + ui__warning("The sys_perf_event_open() syscall " + "returned with %d (%s). /bin/dmesg " + "may provide additional information.\n" + "No CONFIG_PERF_EVENTS=y kernel support " + "configured?\n", err, strerror(err)); + goto out_err; } } - if (perf_evlist__mmap(evlist, mmap_pages, false) < 0) - die("failed to mmap with %d (%s)\n", errno, strerror(errno)); + if (perf_evlist__mmap(evlist, mmap_pages, false) < 0) { + ui__warning("Failed to mmap with %d (%s)\n", + errno, strerror(errno)); + goto out_err; + } + + return; + +out_err: + exit_browser(0); + exit(0); } static int __cmd_top(void) diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c index d4536a9e0d8c..155749d74350 100644 --- a/tools/perf/util/debug.c +++ b/tools/perf/util/debug.c @@ -57,6 +57,16 @@ void ui__warning(const char *format, ...) } #endif +void ui__warning_paranoid(void) +{ + ui__warning("Permission error - are you root?\n" + "Consider tweaking /proc/sys/kernel/perf_event_paranoid:\n" + " -1 - Not paranoid at all\n" + " 0 - Disallow raw tracepoint access for unpriv\n" + " 1 - Disallow cpu events for unpriv\n" + " 2 - Disallow kernel profiling for unpriv\n"); +} + void trace_event(union perf_event *event) { unsigned char *raw_event = (void *)event; diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h index 93516cf4682c..fd53db47e3de 100644 --- a/tools/perf/util/debug.h +++ b/tools/perf/util/debug.h @@ -36,5 +36,6 @@ int ui_helpline__show_help(const char *format, va_list ap); #endif void ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2))); +void ui__warning_paranoid(void); #endif /* __PERF_DEBUG_H */ From ca6a42586fae639ff9e5285d9bdc550fcb1b8d41 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Fri, 25 Mar 2011 13:11:11 -0600 Subject: [PATCH 027/135] perf tools: Emit clearer message for sys_perf_event_open ENOENT return Resend of patch sent back in January 2011 in light of recent confusion around unsupported events for a given platform. Improve sys_perf_event_open ENOENT return handling in top and record, just like 5a3446b does for stat. Retry of Arnaldo's patch using ui_warning instead of die which allows the fallback from hardware cycles to software clock. Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org LKML-Reference: <1301080271-20945-1-git-send-email-daahern@cisco.com> Signed-off-by: David Ahern [ committer note: Some adjustments to make it apply to newer codebase ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-record.c | 10 +++++++++- tools/perf/builtin-top.c | 6 ++++++ 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 623695e18254..db6adecf46f1 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -301,11 +301,19 @@ try_again: && attr->config == PERF_COUNT_HW_CPU_CYCLES) { if (verbose) - warning(" ... trying to fall back to cpu-clock-ticks\n"); + ui__warning("The cycles event is not supported, " + "trying to fall back to cpu-clock-ticks\n"); attr->type = PERF_TYPE_SOFTWARE; attr->config = PERF_COUNT_SW_CPU_CLOCK; goto try_again; } + + if (err == ENOENT) { + ui__warning("The %s event is not supported.\n", + event_name(pos)); + exit(EXIT_FAILURE); + } + printf("\n"); error("sys_perf_event_open() syscall returned with %d (%s). /bin/dmesg may provide additional information.\n", err, strerror(err)); diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 935fc4fd878e..fc1273e976c5 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -870,6 +870,12 @@ try_again: goto try_again; } + if (err == ENOENT) { + ui__warning("The %s event is not supported.\n", + event_name(counter)); + goto out_err; + } + ui__warning("The sys_perf_event_open() syscall " "returned with %d (%s). /bin/dmesg " "may provide additional information.\n" From 4d439517561d009e170e2fe20be1ba25e19abe75 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 29 Mar 2011 14:18:39 -0300 Subject: [PATCH 028/135] perf symbols: Properly align symbol_conf.priv_size If symbol_conf.priv_size is not a multiple of "sizeof(u64)" we'll bus error on sparc64 in symbol__new because the "struct symbol *" pointer is computed by adding symbol_conf.priv_size to the memory allocated. We cannot isolate the fix to symbol__new and symbol__delete since the private area is computed by subtracting the priv_size value from a "struct symbol" pointer, so then the private area can still be potentially unaligned. So, simply align the symbol_conf.priv_size value in symbol__init() Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra LKML-Reference: <20110328.175849.112593455.davem@davemloft.net> Signed-off-by: David S. Miller Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 8f73907a959e..f06c10f092ba 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -2406,6 +2406,8 @@ int symbol__init(void) if (symbol_conf.initialized) return 0; + symbol_conf.priv_size = ALIGN(symbol_conf.priv_size, sizeof(u64)); + elf_version(EV_CURRENT); if (symbol_conf.sort_by_name) symbol_conf.priv_size += (sizeof(struct symbol_name_rb_node) - From 3bda50e3eaf58a4b9c4ce34204e5faa15c8b1b97 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 14 Mar 2011 14:15:06 +0100 Subject: [PATCH 029/135] iwl3945: do not deprecate software scan Software scanning can be used for workaround some performance problems, so do not deprecate it. Signed-off-by: Stanislaw Gruszka Acked-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl3945-base.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c index ab87e1b73529..b6c52095bc1a 100644 --- a/drivers/net/wireless/iwlegacy/iwl3945-base.c +++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c @@ -3960,8 +3960,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e * "the hard way", rather than using device's scan. */ if (iwl3945_mod_params.disable_hw_scan) { - dev_printk(KERN_DEBUG, &(pdev->dev), - "sw scan support is deprecated\n"); + IWL_DEBUG_INFO(priv, "Disabling hw_scan\n"); iwl3945_hw_ops.hw_scan = NULL; } @@ -4280,8 +4279,7 @@ MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])"); module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, int, S_IRUGO); -MODULE_PARM_DESC(disable_hw_scan, - "disable hardware scanning (default 0) (deprecated)"); +MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)"); #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG module_param_named(debug, iwlegacy_debug_level, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "debug output mask"); From 8d4ca61a10feea9583dc62ec1514722e99bdcd3d Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Sun, 27 Mar 2011 20:33:06 +0200 Subject: [PATCH 030/135] wireless: rt2x00: rt2800usb.c add and identify ids taken from staging/rt2860 0x0411,0x016f de37cd49b5a54facef174cf34496919857436e8f MelCo(Buffalo) WLI-UC-G301N 0x050d,0x825b 12840c63b0679f7fab88ea1cc26b52db8b574ce7 Belkin F5D8055 0x050d,0x935a 705059a670f3af2b37695e82de0ee58e75e656ed Belkin F6D4050 v1 0x050d,0x935b 5d92fe3387d086fc2f10426fbdb6b86d6cce5a47 Belkin F6D4050 v2 identifed from ralink driverss 0x0930,0x0a07 RT35xx TOSHIBA 2010_1215_RT3572_Linux_STA_v2.5.0.0.DPO 0x1d4d,0x0011 3072 Pegatron 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO Signed-off-by: Xose Vazquez Perez Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 4e368657a83c..37509d019910 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -730,8 +730,12 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x050d, 0x825b), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x050d, 0x935a), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x050d, 0x935b), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Buffalo */ { USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0411, 0x016f), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Conceptronic */ { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -818,6 +822,7 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Pegatron */ { USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1d4d, 0x0011), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Philips */ { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Planex */ @@ -899,6 +904,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Sitecom */ { USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Toshiba */ + { USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Zinwell */ { USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) }, #endif @@ -961,7 +968,6 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x05a6, 0x0101), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x1d4d, 0x0011), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Planex */ { USB_DEVICE(0x2019, 0x5201), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -975,8 +981,6 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Sweex */ { USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) }, - /* Toshiba */ - { USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Zyxel */ { USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) }, #endif From 0263aa45293838b514b8af674a03faf040991a90 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 29 Mar 2011 11:24:21 +0200 Subject: [PATCH 031/135] iwl3945: disable hw scan by default After new NetworkManager 0.8.996 changes, hardware scanning is causing microcode errors as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=683571 and sometimes kernel crashes: https://bugzilla.redhat.com/show_bug.cgi?id=688252 Also with hw scan there are very bad performance on some systems as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=671366 Since Intel no longer supports 3945, there is no chance to get proper firmware fixes, we need workaround problems by disable hardware scanning by default. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl3945-base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c index b6c52095bc1a..28eb3d885ba1 100644 --- a/drivers/net/wireless/iwlegacy/iwl3945-base.c +++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c @@ -93,6 +93,7 @@ MODULE_LICENSE("GPL"); struct iwl_mod_params iwl3945_mod_params = { .sw_crypto = 1, .restart_fw = 1, + .disable_hw_scan = 1, /* the rest are 0 by default */ }; @@ -4279,7 +4280,7 @@ MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])"); module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, int, S_IRUGO); -MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)"); +MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)"); #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG module_param_named(debug, iwlegacy_debug_level, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "debug output mask"); From 24047e2c4feb8c126e92cc5bb7a863115c89bd72 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 29 Mar 2011 13:43:14 +0200 Subject: [PATCH 032/135] carl9170: Fix tx aggregation problems with some clients Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients carl9170 should set IEEE80211_TX_STAT_AMPDU_NO_BACK to generate a BlockAckReq if the transmission of an AMPDU subframe fails. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/carl9170.h | 1 + drivers/net/wireless/ath/carl9170/main.c | 1 + drivers/net/wireless/ath/carl9170/tx.c | 7 +++++++ 3 files changed, 9 insertions(+) diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h index c6a5fae634a0..9cad061cc1d2 100644 --- a/drivers/net/wireless/ath/carl9170/carl9170.h +++ b/drivers/net/wireless/ath/carl9170/carl9170.h @@ -443,6 +443,7 @@ struct carl9170_ba_stats { u8 ampdu_len; u8 ampdu_ack_len; bool clear; + bool req; }; struct carl9170_sta_info { diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index ede3d7e5a048..89fe60accf85 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1355,6 +1355,7 @@ static int carl9170_op_ampdu_action(struct ieee80211_hw *hw, tid_info = rcu_dereference(sta_info->agg[tid]); sta_info->stats[tid].clear = true; + sta_info->stats[tid].req = false; if (tid_info) { bitmap_zero(tid_info->bitmap, CARL9170_BAW_SIZE); diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index 0ef70b6fc512..cb70ed7ec5cc 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -383,6 +383,7 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar, if (sta_info->stats[tid].clear) { sta_info->stats[tid].clear = false; + sta_info->stats[tid].req = false; sta_info->stats[tid].ampdu_len = 0; sta_info->stats[tid].ampdu_ack_len = 0; } @@ -391,10 +392,16 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar, if (txinfo->status.rates[0].count == 1) sta_info->stats[tid].ampdu_ack_len++; + if (!(txinfo->flags & IEEE80211_TX_STAT_ACK)) + sta_info->stats[tid].req = true; + if (super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_IMM_BA)) { super->s.rix = sta_info->stats[tid].ampdu_len; super->s.cnt = sta_info->stats[tid].ampdu_ack_len; txinfo->flags |= IEEE80211_TX_STAT_AMPDU; + if (sta_info->stats[tid].req) + txinfo->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + sta_info->stats[tid].clear = true; } spin_unlock_bh(&tid_info->lock); From ffd8c746fbef50cf12df239f9d23c2afe1a2c3cb Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Mar 2011 15:28:11 +0200 Subject: [PATCH 033/135] iwlegacy: fix bugs in change_interface If change_interface gets invoked during a firmware restart, it may crash; prevent that from happening by checking if ctx->vif is assigned. Additionally, in my initial commit I forgot to set the vif->p2p variable correctly, so fix that too. Cc: stable@kernel.org [2.6.38+] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index d418b647be80..a209a0e76bf0 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -1805,6 +1805,15 @@ iwl_legacy_mac_change_interface(struct ieee80211_hw *hw, mutex_lock(&priv->mutex); + if (!ctx->vif || !iwl_legacy_is_ready_rf(priv)) { + /* + * Huh? But wait ... this can maybe happen when + * we're in the middle of a firmware restart! + */ + err = -EBUSY; + goto out; + } + interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes; if (!(interface_modes & BIT(newtype))) { @@ -1832,6 +1841,7 @@ iwl_legacy_mac_change_interface(struct ieee80211_hw *hw, /* success */ iwl_legacy_teardown_interface(priv, vif, true); vif->type = newtype; + vif->p2p = newp2p; err = iwl_legacy_setup_interface(priv, ctx); WARN_ON(err); /* From 1b7155f7de119870f0d3fad89f125de2ff6c16be Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Tue, 29 Mar 2011 20:02:57 +0200 Subject: [PATCH 034/135] perf tools: Fix NO_NEWT=1 python build error Fix the following build error: GEN python/perf.so In file included from util/evsel.h:10, from util/python.c:6: util/hist.h:106:18: error: newt.h: No such file or directory error: command 'x86_64-pc-linux-gnu-gcc' failed with exit status 1 make: *** [python/perf.so] Error 1 by passing BASIC_CFLAGS to setup.py. BASIC_CFLAGS variable contains the -DNO_NEWT_SUPPORT switch which prevents building python c extension with newt. Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Stephane Eranian LKML-Reference: <20110329180236.GA19366@erda.amd.com> Signed-off-by: Robert Richter Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 8 ++++++-- tools/perf/util/setup.py | 7 ++++++- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 158c30e8210c..207dee5c5b16 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -165,8 +165,12 @@ grep-libs = $(filter -l%,$(1)) strip-libs = $(filter-out -l%,$(1)) $(OUTPUT)python/perf.so: $(PYRF_OBJS) - $(QUIET_GEN)python util/setup.py --quiet build_ext --build-lib='$(OUTPUT)python' \ - --build-temp='$(OUTPUT)python/temp' + $(QUIET_GEN)( \ + export CFLAGS="$(BASIC_CFLAGS)"; \ + python util/setup.py --quiet build_ext --build-lib='$(OUTPUT)python' \ + --build-temp='$(OUTPUT)python/temp' \ + ) + # # No Perl scripts right now: # diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py index e24ffadb20b2..bbc982f5dd8b 100644 --- a/tools/perf/util/setup.py +++ b/tools/perf/util/setup.py @@ -1,13 +1,18 @@ #!/usr/bin/python2 from distutils.core import setup, Extension +from os import getenv + +cflags = ['-fno-strict-aliasing', '-Wno-write-strings'] +cflags += getenv('CFLAGS', '').split() perf = Extension('perf', sources = ['util/python.c', 'util/ctype.c', 'util/evlist.c', 'util/evsel.c', 'util/cpumap.c', 'util/thread_map.c', 'util/util.c', 'util/xyarray.c', 'util/cgroup.c'], include_dirs = ['util/include'], - extra_compile_args = ['-fno-strict-aliasing', '-Wno-write-strings']) + extra_compile_args = cflags, + ) setup(name='perf', version='0.1', From 84ac7cdbdd0f04df6b96153f7a79127fd6e45467 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 29 Mar 2011 15:38:12 -0700 Subject: [PATCH 035/135] x86, mtrr, pat: Fix one cpu getting out of sync during resume On laptops with core i5/i7, there were reports that after resume graphics workloads were performing poorly on a specific AP, while the other cpu's were ok. This was observed on a 32bit kernel specifically. Debug showed that the PAT init was not happening on that AP during resume and hence it contributing to the poor workload performance on that cpu. On this system, resume flow looked like this: 1. BP starts the resume sequence and we reinit BP's MTRR's/PAT early on using mtrr_bp_restore() 2. Resume sequence brings all AP's online 3. Resume sequence now kicks off the MTRR reinit on all the AP's. 4. For some reason, between point 2 and 3, we moved from BP to one of the AP's. My guess is that printk() during resume sequence is contributing to this. We don't see similar behavior with the 64bit kernel but there is no guarantee that at this point the remaining resume sequence (after AP's bringup) has to happen on BP. 5. set_mtrr() was assuming that we are still on BP and skipped the MTRR/PAT init on that cpu (because of 1 above) 6. But we were on an AP and this led to not reprogramming PAT on this cpu leading to bad performance. Fix this by doing unconditional mtrr_if->set_all() in set_mtrr() during MTRR/PAT init. This might be unnecessary if we are still running on BP. But it is of no harm and will guarantee that after resume, all the cpu's will be in sync with respect to the MTRR/PAT registers. Signed-off-by: Suresh Siddha LKML-Reference: <1301438292-28370-1-git-send-email-eric@anholt.net> Signed-off-by: Eric Anholt Tested-by: Keith Packard Cc: stable@kernel.org [v2.6.32+] Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/mtrr/main.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 307dfbbf4a8e..929739a653d1 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -293,14 +293,24 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ /* * HACK! - * We use this same function to initialize the mtrrs on boot. - * The state of the boot cpu's mtrrs has been saved, and we want - * to replicate across all the APs. - * If we're doing that @reg is set to something special... + * + * We use this same function to initialize the mtrrs during boot, + * resume, runtime cpu online and on an explicit request to set a + * specific MTRR. + * + * During boot or suspend, the state of the boot cpu's mtrrs has been + * saved, and we want to replicate that across all the cpus that come + * online (either at the end of boot or resume or during a runtime cpu + * online). If we're doing that, @reg is set to something special and on + * this cpu we still do mtrr_if->set_all(). During boot/resume, this + * is unnecessary if at this point we are still on the cpu that started + * the boot/resume sequence. But there is no guarantee that we are still + * on the same cpu. So we do mtrr_if->set_all() on this cpu aswell to be + * sure that we are in sync with everyone else. */ if (reg != ~0U) mtrr_if->set(reg, base, size, type); - else if (!mtrr_aps_delayed_init) + else mtrr_if->set_all(); /* Wait for the others */ From c4757ee58ae08fa6eb4df6d5e0f417e11d40bc0e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 7 Mar 2011 11:05:33 +0800 Subject: [PATCH 036/135] hwmon: twl4030-madc-hwmon: add "platform:" prefix for platform modalias Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin Cc: J Keerthy Cc: Samuel Ortiz Signed-off-by: Guenter Roeck --- drivers/hwmon/twl4030-madc-hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c index 97e22bef85ab..de5819199e2e 100644 --- a/drivers/hwmon/twl4030-madc-hwmon.c +++ b/drivers/hwmon/twl4030-madc-hwmon.c @@ -154,4 +154,4 @@ module_exit(twl4030_madc_hwmon_exit); MODULE_DESCRIPTION("TWL4030 ADC Hwmon driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("J Keerthy"); -MODULE_ALIAS("twl4030_madc_hwmon"); +MODULE_ALIAS("platform:twl4030_madc_hwmon"); From 438008af63f8fb3a061c31d331e150fba6eaa103 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 13 Nov 2008 11:51:57 +0100 Subject: [PATCH 037/135] sound: Add delay.h to sound/soc/codecs/sn95031.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is further fallout from delay.h removal from asm/apic.h and asm/dma.h: ca444564a947: x86: Stop including in two asm header files Which caused this build failure: sound/soc/codecs/sn95031.c: In function ‘sn95031_get_mic_bias’: sound/soc/codecs/sn95031.c:153:2: error: implicit declaration of function ‘msleep’ [-Werror=implicit-function-declaration] Cc: Jean Delvare Cc: James E.J. Bottomley Cc: Geert Uytterhoeven Cc: Stephen Rothwell LKML-Reference: <20110325152014.297890ec@endymion.delvare> Signed-off-by: Ingo Molnar --- sound/soc/codecs/sn95031.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/sn95031.c b/sound/soc/codecs/sn95031.c index 2a30eae1881c..a54d2a5b28f6 100644 --- a/sound/soc/codecs/sn95031.c +++ b/sound/soc/codecs/sn95031.c @@ -26,7 +26,9 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include +#include #include + #include #include #include From cb6c8520f6f6bba7b7e1a6de3360a8edfd8243b6 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 30 Mar 2011 20:34:47 +0200 Subject: [PATCH 038/135] x86, amd-nb: Rename CPU PCI id define for F4 With increasing number of PCI function ids, add the PCI function id in the define name instead of its symbolic name in the BKDG for more clarity. This renames function 4 define. Signed-off-by: Borislav Petkov Cc: Jesse Barnes LKML-Reference: <20110330183447.GA3668@aftab> Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_nb.c | 2 +- include/linux/pci_ids.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 6801959a8b2a..4c39baa8facc 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -21,7 +21,7 @@ const struct pci_device_id amd_nb_misc_ids[] = { EXPORT_SYMBOL(amd_nb_misc_ids); static struct pci_device_id amd_nb_link_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_LINK) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, {} }; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 11fd38151cc9..4e2c9150a785 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -518,7 +518,7 @@ #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 #define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603 -#define PCI_DEVICE_ID_AMD_15H_NB_LINK 0x1604 +#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604 #define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 #define PCI_DEVICE_ID_AMD_LANCE 0x2000 #define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 From a718d79cc0e0c2f0aa82ba2c54383a18f15b7738 Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Wed, 30 Mar 2011 22:25:34 -0700 Subject: [PATCH 039/135] Input: uinput - allow for 0/0 min/max on absolute axes. Some devices provide absolute axes with min/max of 0/0 (e.g. wacom's ABS_MISC axis). Current uinput restrictions do not allow duplication of these devices and require hacks in userspace to work around this. If the kernel accepts physical devices with a min/max of 0/0, uinput shouldn't disallow the same range. Signed-off-by: Peter Hutterer Signed-off-by: Dmitry Torokhov --- drivers/input/misc/uinput.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 364bdf43a381..736056897e50 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -302,10 +302,14 @@ static int uinput_validate_absbits(struct input_dev *dev) int retval = 0; for (cnt = 0; cnt < ABS_CNT; cnt++) { + int min, max; if (!test_bit(cnt, dev->absbit)) continue; - if (input_abs_get_max(dev, cnt) <= input_abs_get_min(dev, cnt)) { + min = input_abs_get_min(dev, cnt); + max = input_abs_get_max(dev, cnt); + + if ((min != 0 || max != 0) && max <= min) { printk(KERN_DEBUG "%s: invalid abs[%02x] min:%d max:%d\n", UINPUT_NAME, cnt, From 799a2a215ed7f9398a8d528767e64b8e39904105 Mon Sep 17 00:00:00 2001 From: Rajeev Kumar Date: Wed, 30 Mar 2011 22:33:42 -0700 Subject: [PATCH 040/135] Input: spear-keyboard - fix inverted condition in interrupt handler We should return IRQ_NONE from interrupt handler in case keyboard does not report DATA_AVAIL condition. Signed-off-by: Rajeev Kumar Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/spear-keyboard.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c index bee03d64c453..d712dffd2157 100644 --- a/drivers/input/keyboard/spear-keyboard.c +++ b/drivers/input/keyboard/spear-keyboard.c @@ -69,7 +69,7 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id) u8 sts, val; sts = readb(kbd->io_base + STATUS_REG); - if (sts & DATA_AVAIL) + if (!(sts & DATA_AVAIL)) return IRQ_NONE; if (kbd->last_key != KEY_RESERVED) { From 708748670c7c6dd5bd3b141473086e6937e72737 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 31 Mar 2011 00:01:58 -0700 Subject: [PATCH 041/135] Input: synaptics - fix crash in synaptics_module_init() 'struct dmi_system_id' arrays must always have a terminator to keep dmi_check_system() from looking at data (and possibly crashing) it isn't supposed to look at. The issue went unnoticed until ef8313bb1a22e7d2125d9d758aa8a81f1de91d81, but was introduced about a year earlier with 7705d548cbe33f18ea7713b9a07aa11047aaeca4 (which also similarly changed lifebook.c, but the problem there got eliminated shortly afterwards). The first hunk therefore is a stable candidate back to 2.6.33, while the full change is needed only on 2.6.38. Signed-off-by: Jan Beulich Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index aa186cf6c514..e06e045bf907 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -836,8 +836,8 @@ static const struct dmi_system_id __initconst toshiba_dmi_table[] = { }, }, - { } #endif + { } }; static bool broken_olpc_ec; @@ -851,8 +851,8 @@ static const struct dmi_system_id __initconst olpc_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "XO"), }, }, - { } #endif + { } }; void __init synaptics_module_init(void) From a2a94e7323dad972f23b9000cab150026c929b9f Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Thu, 31 Mar 2011 00:11:48 -0700 Subject: [PATCH 042/135] Input: i8042 - downgrade selftest error message to dbg() On a "really fragile" laptop I noticed a single i8042.c: i8042 controller selftest failed. (0x1 != 0x55) error in the log. But there's no reason to print this message at KERN_ERR level each time that loop fails, especially since the message telling about the overall selftest failure is printed at KERN_INFO level (on X86). Add an actual error message for non-X86 systems, where a selftest failure is (apparently) more serious. Remove a space in an another error message. Signed-off-by: Paul Bolle Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index ac4c93689ab9..d37a48e099d0 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -869,15 +869,15 @@ static int i8042_controller_selftest(void) do { if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { - pr_err("i8042 controller self test timeout\n"); + pr_err("i8042 controller selftest timeout\n"); return -ENODEV; } if (param == I8042_RET_CTL_TEST) return 0; - pr_err("i8042 controller selftest failed. (%#x != %#x)\n", - param, I8042_RET_CTL_TEST); + dbg("i8042 controller selftest: %#x != %#x\n", + param, I8042_RET_CTL_TEST); msleep(50); } while (i++ < 5); @@ -891,6 +891,7 @@ static int i8042_controller_selftest(void) pr_info("giving up on controller selftest, continuing anyway...\n"); return 0; #else + pr_err("i8042 controller selftest failed\n"); return -EIO; #endif } From 9f01b25048ad12b5d71f4f7d3b62ef737639a08d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 24 Mar 2011 11:37:03 +0000 Subject: [PATCH 043/135] drm/i915: Busy-spin wait_for condition in atomic contexts During modesetting, we need to wait for the hardware to report readiness by polling the registers. Normally, we call msleep() between reads, because some state changes may take a whole vblank or more to complete. However during a panic, we are in an atomic context and cannot sleep. Instead, busy spin polling the termination condition. References: https://bugzilla.kernel.org/show_bug.cgi?id=31772 Signed-off-by: Chris Wilson Reviewed-by: Keith Packard Reviewed-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_drv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 5daa991cb287..f5b0d8306d83 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -39,7 +39,7 @@ ret__ = -ETIMEDOUT; \ break; \ } \ - if (W && !in_dbg_master()) msleep(W); \ + if (W && !(in_atomic() || in_dbg_master())) msleep(W); \ } \ ret__; \ }) From 7f58aabc369014fda3a4a33604ba0a1b63b941ac Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 30 Mar 2011 16:20:43 +0100 Subject: [PATCH 044/135] drm/i915: Reset GMBUS controller after NAK Once a NAK has been asserted by the slave, we need to reset the GMBUS controller in order to continue. This is done by asserting the Software Clear Interrupt bit and then clearing it again to restore operations. If we don't clear the NAK, then all future GMBUS xfers will fail, including DDC probes and EDID retrieval. v2: Add some comments as suggested by Keith Packard. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35781 Signed-off-by: Chris Wilson Reviewed-by: Keith Packard Tested-by: Jesse Barnes Tested-by: "Mengmeng Meng" --- drivers/gpu/drm/i915/intel_i2c.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 82d04c5899d2..d3b903bce7c5 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -259,7 +259,7 @@ gmbus_xfer(struct i2c_adapter *adapter, if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50)) goto timeout; if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) - return 0; + goto clear_err; val = I915_READ(GMBUS3 + reg_offset); do { @@ -287,7 +287,7 @@ gmbus_xfer(struct i2c_adapter *adapter, if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50)) goto timeout; if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) - return 0; + goto clear_err; val = loop = 0; do { @@ -302,14 +302,31 @@ gmbus_xfer(struct i2c_adapter *adapter, if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50)) goto timeout; if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) - return 0; + goto clear_err; } - return num; + goto done; + +clear_err: + /* Toggle the Software Clear Interrupt bit. This has the effect + * of resetting the GMBUS controller and so clearing the + * BUS_ERROR raised by the slave's NAK. + */ + I915_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT); + I915_WRITE(GMBUS1 + reg_offset, 0); + +done: + /* Mark the GMBUS interface as disabled. We will re-enable it at the + * start of the next xfer, till then let it sleep. + */ + I915_WRITE(GMBUS0 + reg_offset, 0); + return i; timeout: DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n", bus->reg0 & 0xff, bus->adapter.name); + I915_WRITE(GMBUS0 + reg_offset, 0); + /* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */ bus->force_bit = intel_gpio_create(dev_priv, bus->reg0 & 0xff); if (!bus->force_bit) From a51e91981870d013fcfcc08b0117997edbcbc7a7 Mon Sep 17 00:00:00 2001 From: Dario Faggioli Date: Thu, 24 Mar 2011 14:00:18 +0100 Subject: [PATCH 045/135] sched: Leave sched_setscheduler() earlier if possible, do not disturb SCHED_FIFO tasks sched_setscheduler() (in sched.c) is called in order of changing the scheduling policy and/or the real-time priority of a task. Thus, if we find out that neither of those are actually being modified, it is possible to return earlier and save the overhead of a full deactivate+activate cycle of the task in question. Beside that, if we have more than one SCHED_FIFO task with the same priority on the same rq (which means they share the same priority queue) having one of them changing its position in the priority queue because of a sched_setscheduler (as it happens by means of the deactivate+activate) that does not actually change the priority violates POSIX which states, for SCHED_FIFO: "If a thread whose policy or priority has been modified by pthread_setschedprio() is a running thread or is runnable, the effect on its position in the thread list depends on the direction of the modification, as follows: a. <...> b. If the priority is unchanged, the thread does not change position in the thread list. c. <...>" http://pubs.opengroup.org/onlinepubs/009695399/functions/xsh_chap02_08.html (ed: And the POSIX specification here does, briefly and somewhat unexpectedly, match what common sense tells us as well. ) Signed-off-by: Dario Faggioli Signed-off-by: Peter Zijlstra LKML-Reference: <1300971618.3960.82.camel@Palantir> Signed-off-by: Ingo Molnar --- kernel/sched.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index f592ce6f8616..a8845516ace6 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5011,6 +5011,17 @@ recheck: return -EINVAL; } + /* + * If not changing anything there's no need to proceed further: + */ + if (unlikely(policy == p->policy && (!rt_policy(policy) || + param->sched_priority == p->rt_priority))) { + + __task_rq_unlock(rq); + raw_spin_unlock_irqrestore(&p->pi_lock, flags); + return 0; + } + #ifdef CONFIG_RT_GROUP_SCHED if (user) { /* From e2495b577324938f0209b4f895c5f205c7e47854 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 27 Mar 2011 17:57:13 +0200 Subject: [PATCH 046/135] sched, doc: Beef up load balancing description Correct all function names pertaining to load balancing and explain shortly how load balancing is performed. Signed-off-by: Borislav Petkov Signed-off-by: Peter Zijlstra LKML-Reference: <1301241433-3790-1-git-send-email-bp@alien8.de> Signed-off-by: Ingo Molnar --- Documentation/scheduler/sched-domains.txt | 32 ++++++++++++++++------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/Documentation/scheduler/sched-domains.txt b/Documentation/scheduler/sched-domains.txt index 373ceacc367e..b7ee379b651b 100644 --- a/Documentation/scheduler/sched-domains.txt +++ b/Documentation/scheduler/sched-domains.txt @@ -1,8 +1,7 @@ -Each CPU has a "base" scheduling domain (struct sched_domain). These are -accessed via cpu_sched_domain(i) and this_sched_domain() macros. The domain +Each CPU has a "base" scheduling domain (struct sched_domain). The domain hierarchy is built from these base domains via the ->parent pointer. ->parent -MUST be NULL terminated, and domain structures should be per-CPU as they -are locklessly updated. +MUST be NULL terminated, and domain structures should be per-CPU as they are +locklessly updated. Each scheduling domain spans a number of CPUs (stored in the ->span field). A domain's span MUST be a superset of it child's span (this restriction could @@ -26,11 +25,26 @@ is treated as one entity. The load of a group is defined as the sum of the load of each of its member CPUs, and only when the load of a group becomes out of balance are tasks moved between groups. -In kernel/sched.c, rebalance_tick is run periodically on each CPU. This -function takes its CPU's base sched domain and checks to see if has reached -its rebalance interval. If so, then it will run load_balance on that domain. -rebalance_tick then checks the parent sched_domain (if it exists), and the -parent of the parent and so forth. +In kernel/sched.c, trigger_load_balance() is run periodically on each CPU +through scheduler_tick(). It raises a softirq after the next regularly scheduled +rebalancing event for the current runqueue has arrived. The actual load +balancing workhorse, run_rebalance_domains()->rebalance_domains(), is then run +in softirq context (SCHED_SOFTIRQ). + +The latter function takes two arguments: the current CPU and whether it was idle +at the time the scheduler_tick() happened and iterates over all sched domains +our CPU is on, starting from its base domain and going up the ->parent chain. +While doing that, it checks to see if the current domain has exhausted its +rebalance interval. If so, it runs load_balance() on that domain. It then checks +the parent sched_domain (if it exists), and the parent of the parent and so +forth. + +Initially, load_balance() finds the busiest group in the current sched domain. +If it succeeds, it looks for the busiest runqueue of all the CPUs' runqueues in +that group. If it manages to find such a runqueue, it locks both our initial +CPU's runqueue and the newly found busiest one and starts moving tasks from it +to our runqueue. The exact number of tasks amounts to an imbalance previously +computed while iterating over this sched domain's groups. *** Implementing sched domains *** The "base" domain will "span" the first level of the hierarchy. In the case From 3436ae1298cb22d722a6520fc97f112dd767a9e1 Mon Sep 17 00:00:00 2001 From: Sisir Koppaka Date: Sat, 26 Mar 2011 18:22:55 +0530 Subject: [PATCH 047/135] sched: Fix rebalance interval calculation The interval for checking scheduling domains if they are due to be balanced currently depends on boot state NR_CPUS, which may not accurately reflect the number of online CPUs at the time of check. Thus replace NR_CPUS with num_online_cpus(). (ed: Should only affect those who set NR_CPUS really high, such as 4096 or so :-) Signed-off-by: Sisir Koppaka Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 3f7ec9e27ee1..c7ec5c8e7b44 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -22,6 +22,7 @@ #include #include +#include /* * Targeted preemption latency for CPU-bound tasks: @@ -3850,8 +3851,8 @@ static void rebalance_domains(int cpu, enum cpu_idle_type idle) interval = msecs_to_jiffies(interval); if (unlikely(!interval)) interval = 1; - if (interval > HZ*NR_CPUS/10) - interval = HZ*NR_CPUS/10; + if (interval > HZ*num_online_cpus()/10) + interval = HZ*num_online_cpus()/10; need_serialize = sd->flags & SD_SERIALIZE; From 20443384fe090c5f8aeb016e7e85659c5bbdd69f Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 31 Mar 2011 03:33:29 +0200 Subject: [PATCH 048/135] perf: Rebase max unprivileged mlock threshold on top of page size Ensure we allow 512 kiB + 1 page for user control without assuming a 4096 bytes page size. Reported-by: Peter Zijlstra Signed-off-by: Frederic Weisbecker Signed-off-by: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Stephane Eranian Cc: LKML-Reference: <1301535209-9679-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index c75925c4d1e2..261690923ffb 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -145,8 +145,8 @@ static struct srcu_struct pmus_srcu; */ int sysctl_perf_event_paranoid __read_mostly = 1; -/* Minimum for 128 pages + 1 for the user control page */ -int sysctl_perf_event_mlock __read_mostly = 516; /* 'free' kb per user */ +/* Minimum for 512 kiB + 1 user control page */ +int sysctl_perf_event_mlock __read_mostly = 512 + (PAGE_SIZE / 1024); /* 'free' kiB per user */ /* * max perf event sample rate From 800cd25c12981c99e5401c3551ffffd99f1c6c85 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 31 Mar 2011 03:35:24 +0200 Subject: [PATCH 049/135] perf: mmap 512 kiB by default The default setting of perf record is to mmap 128 pages if the user did not override with -m. However the page size may vary accross different architecture settings, giving different default size between each. Moreover the kernel side still has a default max number of mlocked pages of 512 kiB + 1 page for unprivileged users. 128 + 1 pages with page size > 4096 overlaps this threshold. Thus, better adapt to this limitation and set the default number of pages to fit those 512 kiB + 1 page. Signed-off-by: Frederic Weisbecker Signed-off-by: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Stephane Eranian LKML-Reference: <1301535324-9735-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- tools/perf/builtin-record.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index db6adecf46f1..17d1dcb3c667 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -41,7 +41,7 @@ static u64 user_interval = ULLONG_MAX; static u64 default_interval = 0; static unsigned int page_size; -static unsigned int mmap_pages = 128; +static unsigned int mmap_pages = UINT_MAX; static unsigned int user_freq = UINT_MAX; static int freq = 1000; static int output; @@ -513,6 +513,10 @@ static int __cmd_record(int argc, const char **argv) if (have_tracepoints(&evsel_list->entries)) perf_header__set_feat(&session->header, HEADER_TRACE_INFO); + /* 512 kiB: default amount of unprivileged mlocked memory */ + if (mmap_pages == UINT_MAX) + mmap_pages = (512 * 1024) / page_size; + if (forks) { child_pid = fork(); if (child_pid < 0) { From ab711fe08297de1485fff0a366e6db8828cafd6a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 31 Mar 2011 10:29:26 +0200 Subject: [PATCH 050/135] perf: Fix task context scheduling Jiri reported: | | - once an event is created by sys_perf_event_open, task context | is created and it stays even if the event is closed, until the | task is finished ... thats what I see in code and I assume it's | correct | | - when the task opens event, perf_sched_events jump label is | incremented and following callbacks are started from scheduler | | __perf_event_task_sched_in | __perf_event_task_sched_out | | These callback *in/out set/unset cpuctx->task_ctx value to the | task context. | | - close is called on event on CPU 0: | - the task is scheduled on CPU 0 | - __perf_event_task_sched_in is called | - cpuctx->task_ctx is set | - perf_sched_events jump label is decremented and == 0 | - __perf_event_task_sched_out is not called | - cpuctx->task_ctx on CPU 0 stays set | | - exit is called on CPU 1: | - the task is scheduled on CPU 1 | - perf_event_exit_task is called | - task_ctx_sched_out unsets cpuctx->task_ctx on CPU 1 | - put_ctx destroys the context | | - another call of perf_rotate_context on CPU 0 will use invalid | task_ctx pointer, and eventualy panic. | Cure this the simplest possibly way by partially reverting the jump_label optimization for the sched_out case. Reported-and-tested-by: Jiri Olsa Signed-off-by: Peter Zijlstra Cc: Oleg Nesterov Cc: # .37+ LKML-Reference: <1301520405.4859.213.camel@twins> Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 311b4dc785a1..04d75a8a20ee 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1086,7 +1086,7 @@ void perf_event_task_sched_out(struct task_struct *task, struct task_struct *nex { perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0); - COND_STMT(&perf_sched_events, __perf_event_task_sched_out(task, next)); + __perf_event_task_sched_out(task, next); } extern void perf_event_mmap(struct vm_area_struct *vma); From fd1edb3aa2c1d92618d8f0c6d15d44ea41fcac6a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 28 Mar 2011 13:13:56 +0200 Subject: [PATCH 051/135] perf: Fix task_struct reference leak sys_perf_event_open() had an imbalance in the number of task refs it took causing memory leakage Cc: Jiri Olsa Cc: Oleg Nesterov Cc: stable@kernel.org # .37+ Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 261690923ffb..27960f114efd 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -6531,6 +6531,11 @@ SYSCALL_DEFINE5(perf_event_open, goto err_alloc; } + if (task) { + put_task_struct(task); + task = NULL; + } + /* * Look up the group leader (we will attach this event to it): */ From 818987e9a19c52240ba9b1c20f28f047eef76072 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Thu, 31 Mar 2011 09:32:02 -0500 Subject: [PATCH 052/135] x86, UV: Fix kdump reboot After a crash dump on an SGI Altix UV system the crash kernel fails to cause a reboot. EFI mode is disabled in the kdump kernel, so only the reboot_type of BOOT_ACPI works. Signed-off-by: Cliff Wickman Cc: rja@sgi.com LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index d2cf39bc5ecf..33b10a0fc095 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -35,6 +36,7 @@ #include #include #include +#include DEFINE_PER_CPU(int, x2apic_extra_bits); @@ -811,4 +813,11 @@ void __init uv_system_init(void) /* register Legacy VGA I/O redirection handler */ pci_register_set_vga_state(uv_set_vga_state); + + /* + * For a kdump kernel the reset must be BOOT_ACPI, not BOOT_EFI, as + * EFI is not enabled in the kdump kernel. + */ + if (is_kdump_kernel()) + reboot_type = BOOT_ACPI; } From 92ce52695ccf2b6c4ef7eb02e1bee1bcbf5fde89 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 28 Mar 2011 12:23:05 -0300 Subject: [PATCH 053/135] [media] staging: altera-jtag needs delay.h altera-jtag.c needs to include to fix a build error: drivers/staging/altera-stapl/altera-jtag.c:398: error: implicit declaration of function 'udelay' Signed-off-by: Randy Dunlap Cc: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/altera-stapl/altera-jtag.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/altera-stapl/altera-jtag.c b/drivers/staging/altera-stapl/altera-jtag.c index 6b633b179a7e..876308858b82 100644 --- a/drivers/staging/altera-stapl/altera-jtag.c +++ b/drivers/staging/altera-stapl/altera-jtag.c @@ -23,6 +23,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include From 6705a9cc52733cb5cbdbee72be66ab462d8fb46f Mon Sep 17 00:00:00 2001 From: Manjunatha Halli Date: Wed, 23 Mar 2011 07:44:30 -0300 Subject: [PATCH 054/135] [media] radio: wl128x: Update registration process with ST As underlying ST driver registration API's have changed with latest 2.6.38-rc8 kernel this patch will update the FM driver accordingly. Signed-off-by: Manjunatha Halli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/wl128x/fmdrv_common.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c index 64454d39c0ca..ecfd9fb167d8 100644 --- a/drivers/media/radio/wl128x/fmdrv_common.c +++ b/drivers/media/radio/wl128x/fmdrv_common.c @@ -1494,12 +1494,17 @@ u32 fmc_prepare(struct fmdev *fmdev) } memset(&fm_st_proto, 0, sizeof(fm_st_proto)); - fm_st_proto.type = ST_FM; fm_st_proto.recv = fm_st_receive; fm_st_proto.match_packet = NULL; fm_st_proto.reg_complete_cb = fm_st_reg_comp_cb; fm_st_proto.write = NULL; /* TI ST driver will fill write pointer */ fm_st_proto.priv_data = fmdev; + fm_st_proto.chnl_id = 0x08; + fm_st_proto.max_frame_size = 0xff; + fm_st_proto.hdr_len = 1; + fm_st_proto.offset_len_in_hdr = 0; + fm_st_proto.len_size = 1; + fm_st_proto.reserve = 1; ret = st_register(&fm_st_proto); if (ret == -EINPROGRESS) { @@ -1532,7 +1537,7 @@ u32 fmc_prepare(struct fmdev *fmdev) g_st_write = fm_st_proto.write; } else { fmerr("Failed to get ST write func pointer\n"); - ret = st_unregister(ST_FM); + ret = st_unregister(&fm_st_proto); if (ret < 0) fmerr("st_unregister failed %d\n", ret); return -EAGAIN; @@ -1586,6 +1591,7 @@ u32 fmc_prepare(struct fmdev *fmdev) */ u32 fmc_release(struct fmdev *fmdev) { + static struct st_proto_s fm_st_proto; u32 ret; if (!test_bit(FM_CORE_READY, &fmdev->flag)) { @@ -1604,7 +1610,11 @@ u32 fmc_release(struct fmdev *fmdev) fmdev->resp_comp = NULL; fmdev->rx.freq = 0; - ret = st_unregister(ST_FM); + memset(&fm_st_proto, 0, sizeof(fm_st_proto)); + fm_st_proto.chnl_id = 0x08; + + ret = st_unregister(&fm_st_proto); + if (ret < 0) fmerr("Failed to de-register FM from ST %d\n", ret); else From 97ea530f6fac1f9632b0c4792a2a56411454adbe Mon Sep 17 00:00:00 2001 From: John Lindgren Date: Thu, 24 Mar 2011 23:28:31 +0000 Subject: [PATCH 055/135] drm/radeon/kms: add some sanity checks to obj info record parsingi (v2) Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=35502 agd5f: also add sanity check to connector records. v2: fix one more case. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 02d5c415f499..99768d9d91da 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -675,7 +675,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_ENCODER_CAP_RECORD *cap_record; u16 caps = 0; - while (record->ucRecordType > 0 && + while (record->ucRecordSize > 0 && + record->ucRecordType > 0 && record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) { switch (record->ucRecordType) { case ATOM_ENCODER_CAP_RECORD_TYPE: @@ -720,7 +721,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) break; } - while (record->ucRecordType > 0 && + while (record->ucRecordSize > 0 && + record->ucRecordType > 0 && record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) { switch (record->ucRecordType) { case ATOM_I2C_RECORD_TYPE: @@ -782,10 +784,9 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_HPD_INT_RECORD *hpd_record; ATOM_I2C_ID_CONFIG_ACCESS *i2c_config; - while (record->ucRecordType > 0 - && record-> - ucRecordType <= - ATOM_MAX_OBJECT_RECORD_NUMBER) { + while (record->ucRecordSize > 0 && + record->ucRecordType > 0 && + record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) { switch (record->ucRecordType) { case ATOM_I2C_RECORD_TYPE: i2c_record = From eccaca28e29861a63ebc067bfff59c7efa427371 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 30 Mar 2011 05:03:47 +0000 Subject: [PATCH 056/135] drm: export drm_find_cea_extension to drivers Nouveau needs access to this structure to build an ELD block for use by the HDA audio codec. Signed-off-by: Ben Skeggs Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 3 ++- include/drm/drm_crtc.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 9c595e3b9c20..adc9358c9bec 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -1297,7 +1297,7 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid, /** * Search EDID for CEA extension block. */ -static u8 *drm_find_cea_extension(struct edid *edid) +u8 *drm_find_cea_extension(struct edid *edid) { u8 *edid_ext = NULL; int i; @@ -1318,6 +1318,7 @@ static u8 *drm_find_cea_extension(struct edid *edid) return edid_ext; } +EXPORT_SYMBOL(drm_find_cea_extension); /** * drm_detect_hdmi_monitor - detect whether monitor is hdmi. diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 60edf9be31e5..aaec09713bee 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -778,6 +778,7 @@ extern int drm_mode_gamma_get_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_gamma_set_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern u8 *drm_find_cea_extension(struct edid *edid); extern bool drm_detect_hdmi_monitor(struct edid *edid); extern bool drm_detect_monitor_audio(struct edid *edid); extern int drm_mode_page_flip_ioctl(struct drm_device *dev, From 26fcd2a7618db6c16be6aa3e56c0f3c25381e5a3 Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Thu, 31 Mar 2011 22:39:43 -0700 Subject: [PATCH 057/135] Input: wacom - add support for Lenovo tablet ID (0xE6) Signed-off-by: Manoj Iyer Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index c87d94ff6ae4..08ba5ad9c9be 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1439,6 +1439,9 @@ static const struct wacom_features wacom_features_0xE2 = static const struct wacom_features wacom_features_0xE3 = { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xE6 = + { "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255, + 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x47 = { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1561,6 +1564,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x9F) }, { USB_DEVICE_WACOM(0xE2) }, { USB_DEVICE_WACOM(0xE3) }, + { USB_DEVICE_WACOM(0xE6) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_LENOVO(0x6004) }, { } From 56d448010f4cde5293fe3adfbc636ede827fdfb0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 30 Mar 2011 13:13:38 +0200 Subject: [PATCH 058/135] microblaze: Fix level/edge irq sensibility Patches: "microblaze: Convert to new irq function names" sha (4adc192ec7d977c74c750320f289af9d61c1caca) and "microblaze: Use generic show_interrupts()" sha(9d61c18b25726306c9231428c17db42e3ff29ba7) should also setup edge/level in irq_set_chip_and_handler_name name parameter. Error log: ~ # cat /proc/interrupts CPU0 2: 2 Xilinx INTC-Xilinx INTC eth0 3: 2 Xilinx INTC-Xilinx INTC eth0 4: 241 Xilinx INTC-Xilinx INTC timer 6: 108 Xilinx INTC-Xilinx INTC serial Fixed: ~ # cat /proc/interrupts CPU0 2: 2 Xilinx INTC-level eth0 3: 2 Xilinx INTC-level eth0 4: 238 Xilinx INTC-edge timer 6: 108 Xilinx INTC-level serial Signed-off-by: Michal Simek Acked-by: Thomas Gleixner --- v2: Fix exchanged edge and level --- arch/microblaze/kernel/intc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index 5ba7e162833b..c88f066f41bd 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -158,11 +158,11 @@ void __init init_IRQ(void) for (i = 0; i < nr_irq; ++i) { if (intr_type & (0x00000001 << i)) { irq_set_chip_and_handler_name(i, &intc_dev, - handle_edge_irq, intc_dev.name); + handle_edge_irq, "edge"); irq_clear_status_flags(i, IRQ_LEVEL); } else { irq_set_chip_and_handler_name(i, &intc_dev, - handle_level_irq, intc_dev.name); + handle_level_irq, "level"); irq_set_status_flags(i, IRQ_LEVEL); } } From 57bd35d414c453fea2b08e9dad6067ee7e6c188a Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 31 Mar 2011 08:11:47 +0200 Subject: [PATCH 059/135] microblaze: Wire up new syscalls Hook up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs Signed-off-by: Michal Simek --- arch/microblaze/include/asm/unistd.h | 6 +++++- arch/microblaze/kernel/syscall_table.S | 4 ++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index d770b00ec6b1..30edd61a6b8f 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -386,8 +386,12 @@ #define __NR_fanotify_init 368 #define __NR_fanotify_mark 369 #define __NR_prlimit64 370 +#define __NR_name_to_handle_at 371 +#define __NR_open_by_handle_at 372 +#define __NR_clock_adjtime 373 +#define __NR_syncfs 374 -#define __NR_syscalls 371 +#define __NR_syscalls 375 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index e88a930fd1e3..85cea81d1ca1 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -375,3 +375,7 @@ ENTRY(sys_call_table) .long sys_fanotify_init .long sys_fanotify_mark .long sys_prlimit64 /* 370 */ + .long sys_name_to_handle_at + .long sys_open_by_handle_at + .long sys_clock_adjtime + .long sys_syncfs From 9e1491de519712c73ec621c4ef4872eca6f2bb57 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 18 Mar 2011 13:52:27 +0100 Subject: [PATCH 060/135] microblaze: Fix ftrace - Do not trace idle loop which takes a lot time - Fix cache handling in generic ftrace code - Do not trace lib functions ashldi3, ashrdi3, lshrdi3 Functions are called from generic ftrace code which can't be traced Signed-off-by: Michal Simek --- arch/microblaze/kernel/Makefile | 1 + arch/microblaze/kernel/ftrace.c | 10 ++++++---- arch/microblaze/lib/Makefile | 6 ++++++ 3 files changed, 13 insertions(+), 4 deletions(-) diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index f0cb5c26c81c..494b63b72dd7 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -10,6 +10,7 @@ CFLAGS_REMOVE_early_printk.o = -pg CFLAGS_REMOVE_selfmod.o = -pg CFLAGS_REMOVE_heartbeat.o = -pg CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_process.o = -pg endif extra-y := head.o vmlinux.lds diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c index 515feb404555..357d56abe24a 100644 --- a/arch/microblaze/kernel/ftrace.c +++ b/arch/microblaze/kernel/ftrace.c @@ -51,6 +51,9 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) : "r" (parent), "r" (return_hooker) ); + flush_dcache_range((u32)parent, (u32)parent + 4); + flush_icache_range((u32)parent, (u32)parent + 4); + if (unlikely(faulted)) { ftrace_graph_stop(); WARN_ON(1); @@ -95,6 +98,9 @@ static int ftrace_modify_code(unsigned long addr, unsigned int value) if (unlikely(faulted)) return -EFAULT; + flush_dcache_range(addr, addr + 4); + flush_icache_range(addr, addr + 4); + return 0; } @@ -195,8 +201,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func) ret += ftrace_modify_code((unsigned long)&ftrace_caller, MICROBLAZE_NOP); - /* All changes are done - lets do caches consistent */ - flush_icache(); return ret; } @@ -210,7 +214,6 @@ int ftrace_enable_ftrace_graph_caller(void) old_jump = *(unsigned int *)ip; /* save jump over instruction */ ret = ftrace_modify_code(ip, MICROBLAZE_NOP); - flush_icache(); pr_debug("%s: Replace instruction: 0x%x\n", __func__, old_jump); return ret; @@ -222,7 +225,6 @@ int ftrace_disable_ftrace_graph_caller(void) unsigned long ip = (unsigned long)(&ftrace_call_graph); ret = ftrace_modify_code(ip, old_jump); - flush_icache(); pr_debug("%s\n", __func__); return ret; diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index f1fcbff3da25..10c320aa908b 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -2,6 +2,12 @@ # Makefile # +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_ashldi3.o = -pg +CFLAGS_REMOVE_ashrdi3.o = -pg +CFLAGS_REMOVE_lshrdi3.o = -pg +endif + lib-y := memset.o ifeq ($(CONFIG_OPT_LIB_ASM),y) From a4dd99250dc49031e6a92a895dbcc230a4832083 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 1 Apr 2011 07:15:14 -0700 Subject: [PATCH 061/135] rcu: create new rcu_access_index() and use in mce The MCE subsystem needs to sample an RCU-protected index outside of any protection for that index. If this was a pointer, we would use rcu_access_pointer(), but there is no corresponding rcu_access_index(). This commit therefore creates an rcu_access_index() and applies it to MCE. Signed-off-by: Paul E. McKenney Tested-by: Zdenek Kabelac --- arch/x86/kernel/cpu/mcheck/mce.c | 2 +- include/linux/rcupdate.h | 20 ++++++++++++++++++++ 2 files changed, 21 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 5a05ef63eb4a..3385ea26f684 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1626,7 +1626,7 @@ out: static unsigned int mce_poll(struct file *file, poll_table *wait) { poll_wait(file, &mce_wait, wait); - if (rcu_dereference_check_mce(mcelog.next)) + if (rcu_access_index(mcelog.next)) return POLLIN | POLLRDNORM; if (!mce_apei_read_done && apei_check_mce()) return POLLIN | POLLRDNORM; diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index af5614856285..ff422d2b7f90 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -339,6 +339,12 @@ extern int rcu_my_thread_group_empty(void); ((typeof(*p) __force __kernel *)(p)); \ }) +#define __rcu_access_index(p, space) \ + ({ \ + typeof(p) _________p1 = ACCESS_ONCE(p); \ + rcu_dereference_sparse(p, space); \ + (_________p1); \ + }) #define __rcu_dereference_index_check(p, c) \ ({ \ typeof(p) _________p1 = ACCESS_ONCE(p); \ @@ -428,6 +434,20 @@ extern int rcu_my_thread_group_empty(void); #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/ +/** + * rcu_access_index() - fetch RCU index with no dereferencing + * @p: The index to read + * + * Return the value of the specified RCU-protected index, but omit the + * smp_read_barrier_depends() and keep the ACCESS_ONCE(). This is useful + * when the value of this index is accessed, but the index is not + * dereferenced, for example, when testing an RCU-protected index against + * -1. Although rcu_access_index() may also be used in cases where + * update-side locks prevent the value of the index from changing, you + * should instead use rcu_dereference_index_protected() for this use case. + */ +#define rcu_access_index(p) __rcu_access_index((p), __rcu) + /** * rcu_dereference_index_check() - rcu_dereference for indices with debug checking * @p: The pointer to read, prior to dereferencing From 1591cb60838603c8cc2c540192c8244962436539 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 1 Apr 2011 05:27:51 +0000 Subject: [PATCH 062/135] starfire: clean up dma_addr_t size test Now we have CONFIG_ARCH_DMA_ADDR_T_64BIT. We can fix the hacky dma_addr_t size test cleanly. Signed-off-by: FUJITA Tomonori Signed-off-by: David S. Miller --- drivers/net/starfire.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index a4f2bd52e546..36045f3b0327 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -144,11 +144,7 @@ static int full_duplex[MAX_UNITS] = {0, }; /* Time in jiffies before concluding the transmitter is hung. */ #define TX_TIMEOUT (2 * HZ) -/* - * This SUCKS. - * We need a much better method to determine if dma_addr_t is 64-bit. - */ -#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || (defined(CONFIG_MIPS) && ((defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) || defined(CONFIG_64BIT))) || (defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT)) +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT /* 64-bit dma_addr_t */ #define ADDR_64BITS /* This chip uses 64 bit addresses. */ #define netdrv_addr_t __le64 From c261344d3ce3edac781f9d3c7eabe2e96d8e8fe8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 1 Apr 2011 20:12:02 -0700 Subject: [PATCH 063/135] usbnet: use eth%d name for known ethernet devices The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann Tested-by: Andy Green Signed-off-by: David S. Miller --- drivers/net/usb/cdc_eem.c | 2 +- drivers/net/usb/cdc_ether.c | 2 +- drivers/net/usb/cdc_ncm.c | 2 +- drivers/net/usb/cdc_subset.c | 8 ++++++++ drivers/net/usb/gl620a.c | 2 +- drivers/net/usb/net1080.c | 2 +- drivers/net/usb/plusb.c | 2 +- drivers/net/usb/rndis_host.c | 2 +- drivers/net/usb/usbnet.c | 3 ++- drivers/net/usb/zaurus.c | 8 ++++---- include/linux/usb/usbnet.h | 2 ++ 11 files changed, 23 insertions(+), 12 deletions(-) diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c index 5f3b97668e63..8f128541656d 100644 --- a/drivers/net/usb/cdc_eem.c +++ b/drivers/net/usb/cdc_eem.c @@ -340,7 +340,7 @@ next: static const struct driver_info eem_info = { .description = "CDC EEM Device", - .flags = FLAG_ETHER, + .flags = FLAG_ETHER | FLAG_POINTTOPOINT, .bind = eem_bind, .rx_fixup = eem_rx_fixup, .tx_fixup = eem_tx_fixup, diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 51c259b69278..341f7056a800 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -452,7 +452,7 @@ static int cdc_manage_power(struct usbnet *dev, int on) static const struct driver_info cdc_info = { .description = "CDC Ethernet Device", - .flags = FLAG_ETHER, + .flags = FLAG_ETHER | FLAG_POINTTOPOINT, // .check_connect = cdc_check_connect, .bind = usbnet_cdc_bind, .unbind = usbnet_cdc_unbind, diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 7113168473cf..967371f04454 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1237,7 +1237,7 @@ static int cdc_ncm_manage_power(struct usbnet *dev, int status) static const struct driver_info cdc_ncm_info = { .description = "CDC NCM", - .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET, + .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET, .bind = cdc_ncm_bind, .unbind = cdc_ncm_unbind, .check_connect = cdc_ncm_check_connect, diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c index ca39ace0b0eb..fc5f13d47ad9 100644 --- a/drivers/net/usb/cdc_subset.c +++ b/drivers/net/usb/cdc_subset.c @@ -89,6 +89,7 @@ static int always_connected (struct usbnet *dev) static const struct driver_info ali_m5632_info = { .description = "ALi M5632", + .flags = FLAG_POINTTOPOINT, }; #endif @@ -110,6 +111,7 @@ static const struct driver_info ali_m5632_info = { static const struct driver_info an2720_info = { .description = "AnchorChips/Cypress 2720", + .flags = FLAG_POINTTOPOINT, // no reset available! // no check_connect available! @@ -132,6 +134,7 @@ static const struct driver_info an2720_info = { static const struct driver_info belkin_info = { .description = "Belkin, eTEK, or compatible", + .flags = FLAG_POINTTOPOINT, }; #endif /* CONFIG_USB_BELKIN */ @@ -157,6 +160,7 @@ static const struct driver_info belkin_info = { static const struct driver_info epson2888_info = { .description = "Epson USB Device", .check_connect = always_connected, + .flags = FLAG_POINTTOPOINT, .in = 4, .out = 3, }; @@ -173,6 +177,7 @@ static const struct driver_info epson2888_info = { #define HAVE_HARDWARE static const struct driver_info kc2190_info = { .description = "KC Technology KC-190", + .flags = FLAG_POINTTOPOINT, }; #endif /* CONFIG_USB_KC2190 */ @@ -200,16 +205,19 @@ static const struct driver_info kc2190_info = { static const struct driver_info linuxdev_info = { .description = "Linux Device", .check_connect = always_connected, + .flags = FLAG_POINTTOPOINT, }; static const struct driver_info yopy_info = { .description = "Yopy", .check_connect = always_connected, + .flags = FLAG_POINTTOPOINT, }; static const struct driver_info blob_info = { .description = "Boot Loader OBject", .check_connect = always_connected, + .flags = FLAG_POINTTOPOINT, }; #endif /* CONFIG_USB_ARMLINUX */ diff --git a/drivers/net/usb/gl620a.c b/drivers/net/usb/gl620a.c index dcd57c37ef73..c4cfd1dea881 100644 --- a/drivers/net/usb/gl620a.c +++ b/drivers/net/usb/gl620a.c @@ -193,7 +193,7 @@ static int genelink_bind(struct usbnet *dev, struct usb_interface *intf) static const struct driver_info genelink_info = { .description = "Genesys GeneLink", - .flags = FLAG_FRAMING_GL | FLAG_NO_SETINT, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_GL | FLAG_NO_SETINT, .bind = genelink_bind, .rx_fixup = genelink_rx_fixup, .tx_fixup = genelink_tx_fixup, diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c index ba72a7281cb0..01db4602a39e 100644 --- a/drivers/net/usb/net1080.c +++ b/drivers/net/usb/net1080.c @@ -560,7 +560,7 @@ static int net1080_bind(struct usbnet *dev, struct usb_interface *intf) static const struct driver_info net1080_info = { .description = "NetChip TurboCONNECT", - .flags = FLAG_FRAMING_NC, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_NC, .bind = net1080_bind, .reset = net1080_reset, .check_connect = net1080_check_connect, diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c index 08ad269f6b4e..823c53751307 100644 --- a/drivers/net/usb/plusb.c +++ b/drivers/net/usb/plusb.c @@ -96,7 +96,7 @@ static int pl_reset(struct usbnet *dev) static const struct driver_info prolific_info = { .description = "Prolific PL-2301/PL-2302", - .flags = FLAG_NO_SETINT, + .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT, /* some PL-2302 versions seem to fail usb_set_interface() */ .reset = pl_reset, }; diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index dd8a4adf48ca..5994a25c56ac 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(rndis_tx_fixup); static const struct driver_info rndis_info = { .description = "RNDIS device", - .flags = FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT, + .flags = FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT, .bind = rndis_bind, .unbind = rndis_unbind, .status = rndis_status, diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index cf58b7682565..069c1cf0fdf7 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1380,7 +1380,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) // else "eth%d" when there's reasonable doubt. userspace // can rename the link if it knows better. if ((dev->driver_info->flags & FLAG_ETHER) != 0 && - (net->dev_addr [0] & 0x02) == 0) + ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 || + (net->dev_addr [0] & 0x02) == 0)) strcpy (net->name, "eth%d"); /* WLAN devices should always be named "wlan%d" */ if ((dev->driver_info->flags & FLAG_WLAN) != 0) diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index 3eb0b167b5b4..241756e0e86f 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -102,7 +102,7 @@ static int always_connected (struct usbnet *dev) static const struct driver_info zaurus_sl5x00_info = { .description = "Sharp Zaurus SL-5x00", - .flags = FLAG_FRAMING_Z, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .bind = zaurus_bind, .unbind = usbnet_cdc_unbind, @@ -112,7 +112,7 @@ static const struct driver_info zaurus_sl5x00_info = { static const struct driver_info zaurus_pxa_info = { .description = "Sharp Zaurus, PXA-2xx based", - .flags = FLAG_FRAMING_Z, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .bind = zaurus_bind, .unbind = usbnet_cdc_unbind, @@ -122,7 +122,7 @@ static const struct driver_info zaurus_pxa_info = { static const struct driver_info olympus_mxl_info = { .description = "Olympus R1000", - .flags = FLAG_FRAMING_Z, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .bind = zaurus_bind, .unbind = usbnet_cdc_unbind, @@ -258,7 +258,7 @@ bad_desc: static const struct driver_info bogus_mdlm_info = { .description = "pseudo-MDLM (BLAN) device", - .flags = FLAG_FRAMING_Z, + .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .tx_fixup = zaurus_tx_fixup, .bind = blan_mdlm_bind, diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 201f2228f731..3c7329b8ea0e 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -97,6 +97,8 @@ struct driver_info { #define FLAG_LINK_INTR 0x0800 /* updates link (carrier) status */ +#define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ + /* * Indicates to usbnet, that USB driver accumulates multiple IP packets. * Affects statistic (counters) and short packet handling. From 4dd5ffe4fc36128dc86568ddeaeae359e6037762 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 30 Mar 2011 23:58:08 +0000 Subject: [PATCH 064/135] net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dev_ethtool_get_rx_csum() won't report rx checksumming when it's not changeable and driver is converted to hw_features and friends. Fix this. (dev->hw_features & NETIF_F_RXCSUM) check is dropped - if the ethtool_ops->get_rx_csum is set, then driver is not coverted, yet. Signed-off-by: Michał Mirosław Signed-off-by: David S. Miller --- include/linux/netdevice.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 5eeb2cd3631c..0249fe7e3872 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2598,8 +2598,8 @@ static inline int dev_ethtool_get_settings(struct net_device *dev, static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev) { - if (dev->hw_features & NETIF_F_RXCSUM) - return !!(dev->features & NETIF_F_RXCSUM); + if (dev->features & NETIF_F_RXCSUM) + return 1; if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum) return 0; return dev->ethtool_ops->get_rx_csum(dev); From 028dba0ac3fc3c82da06110b011fce22a5ffad00 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 31 Mar 2011 23:38:54 +0000 Subject: [PATCH 065/135] sctp: fix auth_hmacs field's length of struct sctp_cookie auth_hmacs field of struct sctp_cookie is used for store Requested HMAC Algorithm Parameter, and each HMAC Identifier is 2 bytes, so the length should be: SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2 Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index cc9185ca8fd1..0f6e60a9c308 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -422,7 +422,7 @@ struct sctp_cookie { __u32 adaptation_ind; __u8 auth_random[sizeof(sctp_paramhdr_t) + SCTP_AUTH_RANDOM_LENGTH]; - __u8 auth_hmacs[SCTP_AUTH_NUM_HMACS + 2]; + __u8 auth_hmacs[SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2]; __u8 auth_chunks[sizeof(sctp_paramhdr_t) + SCTP_AUTH_MAX_CHUNKS]; /* This is a shim for my peer's INIT packet, followed by From 2cab86bee8e7f353e6ac8c15b3eb906643497644 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 31 Mar 2011 23:42:55 +0000 Subject: [PATCH 066/135] sctp: malloc enough room for asconf-ack chunk Sometime the ASCONF_ACK parameters can equal to the fourfold of ASCONF parameters, this only happend in some special case: ASCONF parameter is : Unrecognized Parameter (4 bytes) ASCONF_ACK parameter should be: Error Cause Indication parameter (8 bytes header) + Error Cause (4 bytes header) + Unrecognized Parameter (4bytes) Four 4bytes Unrecognized Parameters in ASCONF chunk will cause panic. Pid: 0, comm: swapper Not tainted 2.6.38-next+ #22 Bochs Bochs EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at skb_put+0x60/0x70 EAX: 00000077 EBX: c09060e2 ECX: dec1dc30 EDX: c09469c0 ESI: 00000000 EDI: de3c8d40 EBP: dec1dc58 ESP: dec1dc2c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=dec1c000 task=c09aef20 task.ti=c0980000) Stack: c09469c0 e1894fa4 00000044 00000004 de3c8d00 de3c8d00 de3c8d44 de3c8d40 c09060e2 de25dd80 de3c8d40 dec1dc7c e1894fa4 dec1dcb0 00000040 00000004 00000000 00000800 00000004 00000004 dec1dce0 e1895a2b dec1dcb4 de25d960 Call Trace: [] ? sctp_addto_chunk+0x4e/0x89 [sctp] [] sctp_addto_chunk+0x4e/0x89 [sctp] [] sctp_process_asconf+0x32f/0x3d1 [sctp] [] sctp_sf_do_asconf+0xf8/0x173 [sctp] [] sctp_do_sm+0xb8/0x159 [sctp] [] ? sctp_cname+0x0/0x52 [sctp] [] sctp_assoc_bh_rcv+0xac/0xe3 [sctp] [] sctp_inq_push+0x2d/0x30 [sctp] [] sctp_rcv+0x7a7/0x83d [sctp] [] ? ipv4_confirm+0x118/0x125 [] ? nf_iterate+0x34/0x62 [] ? ip_local_deliver_finish+0x0/0x194 [] ? ip_local_deliver_finish+0x0/0x194 [] ip_local_deliver_finish+0xf5/0x194 [] ? ip_local_deliver_finish+0x0/0x194 [] NF_HOOK.clone.1+0x3d/0x44 [] ip_local_deliver+0x3e/0x44 [] ? ip_local_deliver_finish+0x0/0x194 [] ip_rcv_finish+0x29f/0x2c7 [] ? ip_rcv_finish+0x0/0x2c7 [] NF_HOOK.clone.1+0x3d/0x44 [] ip_rcv+0x1f5/0x233 [] ? ip_rcv_finish+0x0/0x2c7 [] __netif_receive_skb+0x310/0x336 [] netif_receive_skb+0x4b/0x51 [] cp_rx_poll+0x1e7/0x29c [8139cp] [] net_rx_action+0x65/0x13a [] __do_softirq+0xa1/0x149 [] ? __do_softirq+0x0/0x149 [] ? irq_exit+0x37/0x72 [] ? do_IRQ+0x81/0x95 [] ? common_interrupt+0x30/0x38 [] ? native_safe_halt+0xa/0xc [] ? default_idle+0x58/0x92 [] ? cpu_idle+0x96/0xb2 [] ? rest_init+0x5d/0x5f [] ? start_kernel+0x34b/0x350 [] ? i386_start_kernel+0xba/0xc1 Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/sctp/sm_make_chunk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index de98665db524..b3434cc7d0cf 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -3106,10 +3106,10 @@ struct sctp_chunk *sctp_process_asconf(struct sctp_association *asoc, /* create an ASCONF_ACK chunk. * Based on the definitions of parameters, we know that the size of - * ASCONF_ACK parameters are less than or equal to the twice of ASCONF + * ASCONF_ACK parameters are less than or equal to the fourfold of ASCONF * parameters. */ - asconf_ack = sctp_make_asconf_ack(asoc, serial, chunk_len * 2); + asconf_ack = sctp_make_asconf_ack(asoc, serial, chunk_len * 4); if (!asconf_ack) goto done; From 2fceec13375e5d98ef033c6b0ee03943fc460950 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Fri, 1 Apr 2011 21:47:41 -0700 Subject: [PATCH 067/135] tcp: len check is unnecessarily devastating, change to WARN_ON MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All callers are prepared for alloc failures anyway, so this error can safely be boomeranged to the callers domain without super bad consequences. ...At worst the connection might go into a state where each RTO tries to (unsuccessfully) re-fragment with such a mis-sized value and eventually dies. Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index dfa5beb0c1c8..8b0d0167e44a 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1003,7 +1003,8 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, int nlen; u8 flags; - BUG_ON(len > skb->len); + if (WARN_ON(len > skb->len)) + return -EINVAL; nsize = skb_headlen(skb) - len; if (nsize < 0) From df93878c9623146de8050308d65bcfeea4fb0aca Mon Sep 17 00:00:00 2001 From: Guan Xuetao Date: Tue, 29 Mar 2011 21:30:04 +0800 Subject: [PATCH 068/135] unicore32 ldscript fix: add cacheline parameter to PERCPU() macro Also, adjust cacheline parameter of RW_DATA_SECTION and EXCEPTION_TABLE Signed-off-by: Guan Xuetao Acked-by: Arnd Bergmann --- arch/unicore32/kernel/vmlinux.lds.S | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S index 0b4eb89729e7..9bf7f7af52c5 100644 --- a/arch/unicore32/kernel/vmlinux.lds.S +++ b/arch/unicore32/kernel/vmlinux.lds.S @@ -14,6 +14,7 @@ #include #include #include +#include OUTPUT_ARCH(unicore32) ENTRY(stext) @@ -29,7 +30,7 @@ SECTIONS HEAD_TEXT_SECTION INIT_TEXT_SECTION(PAGE_SIZE) INIT_DATA_SECTION(16) - PERCPU(PAGE_SIZE) + PERCPU(L1_CACHE_BYTES, PAGE_SIZE) __init_end = .; _stext = .; @@ -45,10 +46,10 @@ SECTIONS _sdata = .; RO_DATA_SECTION(PAGE_SIZE) - RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE) + RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) _edata = .; - EXCEPTION_TABLE(32) + EXCEPTION_TABLE(L1_CACHE_BYTES) NOTES BSS_SECTION(0, 0, 0) From 0bfdc8e121fd61adbc03848af3ca15fcbef2d1d8 Mon Sep 17 00:00:00 2001 From: Guan Xuetao Date: Tue, 29 Mar 2011 22:17:42 +0800 Subject: [PATCH 069/135] unicore32 fix: remove arch-specific futex support The futex functions in unicore32 are not used and verified, so just replaced by asm-generic version. Signed-off-by: Guan Xuetao Acked-by: Arnd Bergmann --- arch/unicore32/Makefile | 2 +- arch/unicore32/include/asm/futex.h | 143 ----------------------------- 2 files changed, 1 insertion(+), 144 deletions(-) delete mode 100644 arch/unicore32/include/asm/futex.h diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile index e08d6d370a8a..76a8beec7d03 100644 --- a/arch/unicore32/Makefile +++ b/arch/unicore32/Makefile @@ -48,7 +48,7 @@ ASM_GENERIC_HEADERS += bitsperlong.h bug.h bugs.h ASM_GENERIC_HEADERS += cputime.h current.h ASM_GENERIC_HEADERS += device.h div64.h ASM_GENERIC_HEADERS += emergency-restart.h errno.h -ASM_GENERIC_HEADERS += fb.h fcntl.h ftrace.h +ASM_GENERIC_HEADERS += fb.h fcntl.h ftrace.h futex.h ASM_GENERIC_HEADERS += hardirq.h hw_irq.h ASM_GENERIC_HEADERS += ioctl.h ioctls.h ipcbuf.h irq_regs.h ASM_GENERIC_HEADERS += kdebug.h kmap_types.h diff --git a/arch/unicore32/include/asm/futex.h b/arch/unicore32/include/asm/futex.h deleted file mode 100644 index 07dea6170558..000000000000 --- a/arch/unicore32/include/asm/futex.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * linux/arch/unicore32/include/asm/futex.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __UNICORE_FUTEX_H__ -#define __UNICORE_FUTEX_H__ - -#ifdef __KERNEL__ - -#include -#include -#include -#include - -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ - __asm__ __volatile__( \ - "1: ldw.u %1, [%2]\n" \ - " " insn "\n" \ - "2: stw.u %0, [%2]\n" \ - " mov %0, #0\n" \ - "3:\n" \ - " .pushsection __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 4f, 2b, 4f\n" \ - " .popsection\n" \ - " .pushsection .fixup,\"ax\"\n" \ - "4: mov %0, %4\n" \ - " b 3b\n" \ - " .popsection" \ - : "=&r" (ret), "=&r" (oldval) \ - : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ - : "cc", "memory") - -static inline int -futex_atomic_op_inuser(int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; - - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - pagefault_disable(); /* implies preempt_disable() */ - - switch (op) { - case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_OR: - __futex_atomic_op("or %0, %1, %3", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", - ret, oldval, uaddr, ~oparg); - break; - case FUTEX_OP_XOR: - __futex_atomic_op("xor %0, %1, %3", ret, oldval, uaddr, oparg); - break; - default: - ret = -ENOSYS; - } - - pagefault_enable(); /* subsumes preempt_enable() */ - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: - ret = (oldval == cmparg); - break; - case FUTEX_OP_CMP_NE: - ret = (oldval != cmparg); - break; - case FUTEX_OP_CMP_LT: - ret = (oldval < cmparg); - break; - case FUTEX_OP_CMP_GE: - ret = (oldval >= cmparg); - break; - case FUTEX_OP_CMP_LE: - ret = (oldval <= cmparg); - break; - case FUTEX_OP_CMP_GT: - ret = (oldval > cmparg); - break; - default: - ret = -ENOSYS; - } - } - return ret; -} - -static inline int -futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) -{ - int val; - - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - pagefault_disable(); /* implies preempt_disable() */ - - __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" - "1: ldw.u %0, [%3]\n" - " cmpxor.a %0, %1\n" - " bne 3f\n" - "2: stw.u %2, [%3]\n" - "3:\n" - " .pushsection __ex_table,\"a\"\n" - " .align 3\n" - " .long 1b, 4f, 2b, 4f\n" - " .popsection\n" - " .pushsection .fixup,\"ax\"\n" - "4: mov %0, %4\n" - " b 3b\n" - " .popsection" - : "=&r" (val) - : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) - : "cc", "memory"); - - pagefault_enable(); /* subsumes preempt_enable() */ - - return val; -} - -#endif /* __KERNEL__ */ -#endif /* __UNICORE_FUTEX_H__ */ From 858e4f4ba14441c2d43eed55dcd660c09bae38df Mon Sep 17 00:00:00 2001 From: Guan Xuetao Date: Tue, 29 Mar 2011 20:38:51 +0800 Subject: [PATCH 070/135] unicore32 rtc driver fix: cleanup irq_set_freq and irq_set_state Signed-off-by: Guan Xuetao --- arch/unicore32/kernel/rtc.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/unicore32/kernel/rtc.c b/arch/unicore32/kernel/rtc.c index c5f068295b51..8cad70b3302c 100644 --- a/arch/unicore32/kernel/rtc.c +++ b/arch/unicore32/kernel/rtc.c @@ -88,11 +88,6 @@ static int puv3_rtc_setpie(struct device *dev, int enabled) return 0; } -static int puv3_rtc_setfreq(struct device *dev, int freq) -{ - return 0; -} - /* Time read/write */ static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) @@ -214,8 +209,6 @@ static const struct rtc_class_ops puv3_rtcops = { .set_time = puv3_rtc_settime, .read_alarm = puv3_rtc_getalarm, .set_alarm = puv3_rtc_setalarm, - .irq_set_freq = puv3_rtc_setfreq, - .irq_set_state = puv3_rtc_setpie, .proc = puv3_rtc_proc, }; @@ -294,8 +287,6 @@ static int puv3_rtc_probe(struct platform_device *pdev) puv3_rtc_enable(pdev, 1); - puv3_rtc_setfreq(&pdev->dev, 1); - /* register RTC and exit */ rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops, From 28e58cc9586ab3f4dbc79c55110955ad192e4c29 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 20 Mar 2011 16:56:55 +0800 Subject: [PATCH 071/135] unicore32 core architecture: remove duplicated #include Remove duplicated #include('s) in arch/unicore32/kernel/traps.c Signed-off-by: Huang Weiyi Acked-by: Guan Xuetao --- arch/unicore32/kernel/traps.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c index 25abbb101729..254e36fa9513 100644 --- a/arch/unicore32/kernel/traps.c +++ b/arch/unicore32/kernel/traps.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include From 6b794743b2c5e21825d35b5d5dd57d6fcc388198 Mon Sep 17 00:00:00 2001 From: Guan Xuetao Date: Fri, 1 Apr 2011 16:38:59 +0800 Subject: [PATCH 072/135] unicore32 framebuffer fix: get videomemory by __get_free_pages() and make it floatable 1. get videomemory by __get_free_pages() in fb-puv3.c 2. remove resource reservation for old fixed UNIGFX_MMAP & UVC_MMAP space 3. remove unused macros: PKUNTIY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE, PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE and KUSER_UNIGFX_BASE 4. remove unused header linux/vmalloc.h in fb-puv3.h Signed-off-by: Guan Xuetao Acked-by: Arnd Bergmann --- arch/unicore32/include/mach/PKUnity.h | 10 ---------- arch/unicore32/include/mach/memory.h | 1 - arch/unicore32/kernel/puv3-core.c | 5 ----- arch/unicore32/kernel/setup.c | 15 ++------------ arch/unicore32/mm/mmu.c | 20 ------------------- drivers/video/fb-puv3.c | 28 ++++++++++++++++----------- 6 files changed, 19 insertions(+), 60 deletions(-) diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h index a18bdc3810e6..8040d575dddb 100644 --- a/arch/unicore32/include/mach/PKUnity.h +++ b/arch/unicore32/include/mach/PKUnity.h @@ -23,16 +23,6 @@ #define PKUNITY_SDRAM_BASE 0x00000000 /* 0x00000000 - 0x7FFFFFFF 2GB */ #define PKUNITY_MMIO_BASE 0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */ -/* - * PKUNITY Memory Map Addresses: 0x0D000000 - 0x0EFFFFFF (32MB) - * 0x0D000000 - 0x0DFFFFFF 16MB: for UVC - * 0x0E000000 - 0x0EFFFFFF 16MB: for UNIGFX - */ -#define PKUNITY_UVC_MMAP_BASE 0x0D000000 -#define PKUNITY_UVC_MMAP_SIZE 0x01000000 /* 16MB */ -#define PKUNITY_UNIGFX_MMAP_BASE 0x0E000000 -#define PKUNITY_UNIGFX_MMAP_SIZE 0x01000000 /* 16MB */ - /* * PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB) * 0x80000000 - 0x8000000B 12B PCI Configuration regs diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h index 0bf21c944710..4be72c21d491 100644 --- a/arch/unicore32/include/mach/memory.h +++ b/arch/unicore32/include/mach/memory.h @@ -50,7 +50,6 @@ void puv3_pci_adjust_zones(unsigned long *size, unsigned long *holes); /* kuser area */ #define KUSER_VECPAGE_BASE (KUSER_BASE + UL(0x3fff0000)) -#define KUSER_UNIGFX_BASE (PAGE_OFFSET + PKUNITY_UNIGFX_MMAP_BASE) /* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */ #define kuser_vecpage_to_vectors(x) ((x) - (KUSER_VECPAGE_BASE) \ + (VECTORS_BASE)) diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c index 8b1b6beb858e..1a505a787765 100644 --- a/arch/unicore32/kernel/puv3-core.c +++ b/arch/unicore32/kernel/puv3-core.c @@ -99,11 +99,6 @@ static struct resource puv3_unigfx_resources[] = { .end = io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff, .flags = IORESOURCE_MEM, }, - [1] = { - .start = PKUNITY_UNIGFX_MMAP_BASE, - .end = PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE, - .flags = IORESOURCE_MEM, - }, }; static struct resource puv3_rtc_resources[] = { diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c index 1e175a82844d..471b6bca8da4 100644 --- a/arch/unicore32/kernel/setup.c +++ b/arch/unicore32/kernel/setup.c @@ -63,12 +63,6 @@ static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; * Standard memory resources */ static struct resource mem_res[] = { - { - .name = "Video RAM", - .start = 0, - .end = 0, - .flags = IORESOURCE_MEM - }, { .name = "Kernel text", .start = 0, @@ -83,9 +77,8 @@ static struct resource mem_res[] = { } }; -#define video_ram mem_res[0] -#define kernel_code mem_res[1] -#define kernel_data mem_res[2] +#define kernel_code mem_res[0] +#define kernel_data mem_res[1] /* * These functions re-use the assembly code in head.S, which @@ -224,10 +217,6 @@ request_standard_resources(struct meminfo *mi) kernel_data.end <= res->end) request_resource(res, &kernel_data); } - - video_ram.start = PKUNITY_UNIGFX_MMAP_BASE; - video_ram.end = PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE; - request_resource(&iomem_resource, &video_ram); } static void (*init_machine)(void) __initdata; diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c index 7bf3d588631f..db2d334941b4 100644 --- a/arch/unicore32/mm/mmu.c +++ b/arch/unicore32/mm/mmu.c @@ -338,15 +338,6 @@ void __init uc32_mm_memblock_reserve(void) * and can only be in node 0. */ memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t)); - -#ifdef CONFIG_PUV3_UNIGFX - /* - * These should likewise go elsewhere. They pre-reserve the - * screen/video memory region at the 48M~64M of main system memory. - */ - memblock_reserve(PKUNITY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE); - memblock_reserve(PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE); -#endif } /* @@ -370,17 +361,6 @@ static void __init devicemaps_init(void) for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); - /* - * Create a mapping for UniGFX VRAM - */ -#ifdef CONFIG_PUV3_UNIGFX - map.pfn = __phys_to_pfn(PKUNITY_UNIGFX_MMAP_BASE); - map.virtual = KUSER_UNIGFX_BASE; - map.length = PKUNITY_UNIGFX_MMAP_SIZE; - map.type = MT_KUSER; - create_mapping(&map); -#endif - /* * Create a mapping for the machine vectors at the high-vectors * location (0xffff0000). If we aren't using high-vectors, also diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c index dbd2dc4745d1..27f2c57e06e9 100644 --- a/drivers/video/fb-puv3.c +++ b/drivers/video/fb-puv3.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -531,7 +530,7 @@ static int unifb_set_par(struct fb_info *info) return -EINVAL; } - writel(PKUNITY_UNIGFX_MMAP_BASE, UDE_FSA); + writel(info->fix.smem_start, UDE_FSA); writel(info->var.yres, UDE_LS); writel(get_line_length(info->var.xres, info->var.bits_per_pixel) >> 3, UDE_PS); @@ -680,13 +679,27 @@ static int unifb_probe(struct platform_device *dev) struct fb_info *info; u32 unifb_regs[UNIFB_REGS_NUM]; int retval = -ENOMEM; - struct resource *iomem, *mapmem; + struct resource *iomem; + void *videomemory; + + videomemory = (void *)__get_free_pages(GFP_KERNEL | __GFP_COMP, + get_order(UNIFB_MEMSIZE)); + if (!videomemory) + goto err; + + memset(videomemory, 0, UNIFB_MEMSIZE); + + unifb_fix.smem_start = virt_to_phys(videomemory); + unifb_fix.smem_len = UNIFB_MEMSIZE; + + iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); + unifb_fix.mmio_start = iomem->start; info = framebuffer_alloc(sizeof(u32)*256, &dev->dev); if (!info) goto err; - info->screen_base = (char __iomem *)KUSER_UNIGFX_BASE; + info->screen_base = (char __iomem *)videomemory; info->fbops = &unifb_ops; retval = fb_find_mode(&info->var, info, NULL, @@ -695,13 +708,6 @@ static int unifb_probe(struct platform_device *dev) if (!retval || (retval == 4)) info->var = unifb_default; - iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); - unifb_fix.mmio_start = iomem->start; - - mapmem = platform_get_resource(dev, IORESOURCE_MEM, 1); - unifb_fix.smem_start = mapmem->start; - unifb_fix.smem_len = UNIFB_MEMSIZE; - info->fix = unifb_fix; info->pseudo_palette = info->par; info->par = NULL; From e28e1d93e9591d21e440f5210a9b4317c59445df Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 2 Apr 2011 21:20:24 -0700 Subject: [PATCH 073/135] Input: rpckbd - fix a leak of the IRQ during init failure In rpckbd_open prror path, free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Axel Lin Signed-off-by: Dmitry Torokhov --- drivers/input/serio/rpckbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c index 9da6fbcaaa7e..7ec3c97dc1b9 100644 --- a/drivers/input/serio/rpckbd.c +++ b/drivers/input/serio/rpckbd.c @@ -90,7 +90,7 @@ static int rpckbd_open(struct serio *port) if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", port) != 0) { printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n"); - free_irq(IRQ_KEYBOARDRX, NULL); + free_irq(IRQ_KEYBOARDRX, port); return -EBUSY; } From beb47274116b36e17cf52869a2004e7d12a4ef1d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sat, 2 Apr 2011 09:09:08 -0400 Subject: [PATCH 074/135] drm/radeon/kms: Add support for tv-out dongle on G5 9600 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index cf602e2d0718..8caf546c8e92 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -2079,6 +2079,19 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) DRM_MODE_CONNECTOR_DVII, &ddc_i2c, CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I, &hpd); + /* TV - TV DAC */ + ddc_i2c.valid = false; + hpd.hpd = RADEON_HPD_NONE; + radeon_add_legacy_encoder(dev, + radeon_get_encoder_enum(dev, + ATOM_DEVICE_TV1_SUPPORT, + 2), + ATOM_DEVICE_TV1_SUPPORT); + radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, + DRM_MODE_CONNECTOR_SVIDEO, + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO, + &hpd); break; default: DRM_INFO("Connector table: %d (invalid)\n", From fb9674bd2cd3c18f6c756ee123967e43be501263 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sat, 2 Apr 2011 09:15:50 -0400 Subject: [PATCH 075/135] drm/radeon/kms: pageflipping cleanup for avivo+ Avoid touching the flip setup regs while acceleration is running. Set them at modeset rather than during pageflip. Touching these regs while acceleration is active caused hangs on pre-avivo chips. These chips do not seem to be affected, but better safe than sorry, plus it avoids repeatedly reprogramming the regs every flip. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 20 ++++++++++++++++++++ drivers/gpu/drm/radeon/evergreen.c | 11 ----------- drivers/gpu/drm/radeon/rs600.c | 11 ----------- 3 files changed, 20 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 10e41af6b026..b41ec59c7100 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1009,6 +1009,7 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, uint64_t fb_location; uint32_t fb_format, fb_pitch_pixels, tiling_flags; u32 fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_NONE); + u32 tmp; int r; /* no fb bound */ @@ -1137,6 +1138,15 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, WREG32(EVERGREEN_VIEWPORT_SIZE + radeon_crtc->crtc_offset, (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay); + /* pageflip setup */ + /* make sure flip is at vb rather than hb */ + tmp = RREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset); + tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN; + WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp); + + /* set pageflip to happen anywhere in vblank interval */ + WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0); + if (!atomic && fb && fb != crtc->fb) { radeon_fb = to_radeon_framebuffer(fb); rbo = gem_to_radeon_bo(radeon_fb->obj); @@ -1167,6 +1177,7 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, uint64_t fb_location; uint32_t fb_format, fb_pitch_pixels, tiling_flags; u32 fb_swap = R600_D1GRPH_SWAP_ENDIAN_NONE; + u32 tmp; int r; /* no fb bound */ @@ -1294,6 +1305,15 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, WREG32(AVIVO_D1MODE_VIEWPORT_SIZE + radeon_crtc->crtc_offset, (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay); + /* pageflip setup */ + /* make sure flip is at vb rather than hb */ + tmp = RREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset); + tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN; + WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp); + + /* set pageflip to happen anywhere in vblank interval */ + WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0); + if (!atomic && fb && fb != crtc->fb) { radeon_fb = to_radeon_framebuffer(fb); rbo = gem_to_radeon_bo(radeon_fb->obj); diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 941080a77940..0b0cc74c08c0 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -43,17 +43,6 @@ static void evergreen_pcie_gen2_enable(struct radeon_device *rdev); void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc) { - struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc]; - u32 tmp; - - /* make sure flip is at vb rather than hb */ - tmp = RREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset); - tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN; - WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp); - - /* set pageflip to happen anywhere in vblank interval */ - WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0); - /* enable the pflip int */ radeon_irq_kms_pflip_irq_get(rdev, crtc); } diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 19763f5df5e1..876cebc4b8ba 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -48,17 +48,6 @@ int rs600_mc_wait_for_idle(struct radeon_device *rdev); void rs600_pre_page_flip(struct radeon_device *rdev, int crtc) { - struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc]; - u32 tmp; - - /* make sure flip is at vb rather than hb */ - tmp = RREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset); - tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN; - WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp); - - /* set pageflip to happen anywhere in vblank interval */ - WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0); - /* enable the pflip int */ radeon_irq_kms_pflip_irq_get(rdev, crtc); } From a14b289d4614bb3b25d0455d68f72f3c7b4cc8e8 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Sun, 3 Apr 2011 22:04:01 -0700 Subject: [PATCH 076/135] mlx4: fix kfree on error path in new_steering_entry() On error path kfree() should get pointer to memory allocated by kmalloc() not the address of variable holding it (which is on stack). Signed-off-by: Mariusz Kozlowski Signed-off-by: David S. Miller --- drivers/net/mlx4/mcg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c index 37150b2f6425..c6d336aed2d9 100644 --- a/drivers/net/mlx4/mcg.c +++ b/drivers/net/mlx4/mcg.c @@ -111,7 +111,7 @@ static int new_steering_entry(struct mlx4_dev *dev, u8 vep_num, u8 port, u32 members_count; struct mlx4_steer_index *new_entry; struct mlx4_promisc_qp *pqp; - struct mlx4_promisc_qp *dqp; + struct mlx4_promisc_qp *dqp = NULL; u32 prot; int err; u8 pf_num; @@ -184,7 +184,7 @@ out_mailbox: out_alloc: if (dqp) { list_del(&dqp->list); - kfree(&dqp); + kfree(dqp); } list_del(&new_entry->list); kfree(new_entry); From d2f989262ee713b9a8a9a1baedc2445ed958d986 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Fri, 25 Mar 2011 10:17:45 +0530 Subject: [PATCH 077/135] powerpc/85xx: Update dts for PCIe memory maps to match u-boot of Px020RDB PCIe memory address space is 1:1 mapped with u-boot. Update dts of Px020RDB i.e. P1020RDB and P2020RDB to match the address map changes in u-boot. Signed-off-by: Prabhakar Kushwaha Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1020rdb.dts | 12 ++++++------ arch/powerpc/boot/dts/p2020rdb.dts | 12 ++++++------ arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 4 ++-- arch/powerpc/boot/dts/p2020rdb_camp_core1.dts | 10 +++++----- 4 files changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts index 22f64b62d7f6..e0668f877794 100644 --- a/arch/powerpc/boot/dts/p1020rdb.dts +++ b/arch/powerpc/boot/dts/p1020rdb.dts @@ -1,7 +1,7 @@ /* * P1020 RDB Device Tree Source * - * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2009-2011 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -553,7 +553,7 @@ reg = <0 0xffe09000 0 0x1000>; bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>; + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <16 2>; @@ -580,8 +580,8 @@ #address-cells = <3>; reg = <0 0xffe0a000 0 0x1000>; bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <16 2>; @@ -590,8 +590,8 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index da4cb0d8d215..e2d48fd4416e 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -1,7 +1,7 @@ /* * P2020 RDB Device Tree Source * - * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2009-2011 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -537,7 +537,7 @@ reg = <0 0xffe09000 0 0x1000>; bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>; + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <25 2>; @@ -564,8 +564,8 @@ #address-cells = <3>; reg = <0 0xffe0a000 0 0x1000>; bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <26 2>; @@ -574,8 +574,8 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts index 0fe93d0c8b2e..b69c3a5dc858 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts @@ -6,7 +6,7 @@ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb, * eth1, eth2, sdhc, crypto, global-util, pci0. * - * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2009-2011 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -342,7 +342,7 @@ reg = <0 0xffe09000 0 0x1000>; bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>; + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <25 2>; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts index e95a51285328..7a31d46c01b0 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts @@ -7,7 +7,7 @@ * * Please note to add "-b 1" for core1's dts compiling. * - * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2009-2011 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -162,8 +162,8 @@ #address-cells = <3>; reg = <0 0xffe0a000 0 0x1000>; bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <26 2>; @@ -172,8 +172,8 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 From a94d7b35067ab403485a1ea06b7a3d0172d1a1ba Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 31 Mar 2011 17:11:39 -0500 Subject: [PATCH 078/135] edac/mpc85xx: Limit setting/clearing of HID1[RFXE] to e500v1/v2 cores Only the e500v1/v2 cores have HID1[RXFE] so we should attempt to set or clear this register bit on them. Otherwise we get crashes like: NIP: c0579f84 LR: c006d550 CTR: c0579f84 REGS: ef857ec0 TRAP: 0700 Not tainted (2.6.38.2-00072-gf15ba3c) MSR: 00021002 CR: 22044022 XER: 00000000 TASK = ef8559c0[1] 'swapper' THREAD: ef856000 CPU: 0 GPR00: c006d538 ef857f70 ef8559c0 00000000 00000004 00000000 00000000 00000000 GPR08: c0590000 c30170a8 00000000 c30170a8 00000001 0fffe000 00000000 00000000 GPR16: 00000000 7ffa0e60 00000000 00000000 7ffb0bd8 7ff3b844 c05be000 00000000 GPR24: 00000000 00000000 c05c28b0 c0579fac 00000000 00029002 00000000 c0579f84 NIP [c0579f84] mpc85xx_mc_clear_rfxe+0x0/0x28 LR [c006d550] on_each_cpu+0x34/0x50 Call Trace: [ef857f70] [c006d538] on_each_cpu+0x1c/0x50 (unreliable) [ef857f90] [c057a070] mpc85xx_mc_init+0xc4/0xdc [ef857fa0] [c0001cd4] do_one_initcall+0x34/0x1a8 [ef857fd0] [c055d9d8] kernel_init+0x17c/0x218 [ef857ff0] [c000cda4] kernel_thread+0x4c/0x68 Instruction dump: 40be0018 3c60c052 3863c70c 4be9baad 3be0ffed 4bd7c99d 80010014 7fe3fb78 83e1000c 38210010 7c0803a6 4e800020 <7c11faa6> 54290024 81290008 3d60c06e Oops: Exception in kernel mode, sig: 4 [#2] ---[ end trace 49ff3b8f93efde1a ]--- Also use the HID1_RFXE define rather than a magic number. Signed-off-by: Kumar Gala --- drivers/edac/mpc85xx_edac.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index ffb5ad080bee..38ab8e2cd7f4 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -1147,13 +1147,14 @@ static struct platform_driver mpc85xx_mc_err_driver = { static void __init mpc85xx_mc_clear_rfxe(void *data) { orig_hid1[smp_processor_id()] = mfspr(SPRN_HID1); - mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~0x20000)); + mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~HID1_RFXE)); } #endif static int __init mpc85xx_mc_init(void) { int res = 0; + u32 pvr = 0; printk(KERN_INFO "Freescale(R) MPC85xx EDAC driver, " "(C) 2006 Montavista Software\n"); @@ -1183,12 +1184,17 @@ static int __init mpc85xx_mc_init(void) #endif #ifdef CONFIG_FSL_SOC_BOOKE - /* - * need to clear HID1[RFXE] to disable machine check int - * so we can catch it - */ - if (edac_op_state == EDAC_OPSTATE_INT) - on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0); + pvr = mfspr(SPRN_PVR); + + if ((PVR_VER(pvr) == PVR_VER_E500V1) || + (PVR_VER(pvr) == PVR_VER_E500V2)) { + /* + * need to clear HID1[RFXE] to disable machine check int + * so we can catch it + */ + if (edac_op_state == EDAC_OPSTATE_INT) + on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0); + } #endif return 0; @@ -1206,7 +1212,12 @@ static void __exit mpc85xx_mc_restore_hid1(void *data) static void __exit mpc85xx_mc_exit(void) { #ifdef CONFIG_FSL_SOC_BOOKE - on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0); + u32 pvr = mfspr(SPRN_PVR); + + if ((PVR_VER(pvr) == PVR_VER_E500V1) || + (PVR_VER(pvr) == PVR_VER_E500V2)) { + on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0); + } #endif #ifdef CONFIG_PCI platform_driver_unregister(&mpc85xx_pci_err_driver); From b3b896c73b4b04b506816a09994192e3a54f0fef Mon Sep 17 00:00:00 2001 From: Major Lee Date: Mon, 4 Apr 2011 11:32:12 +0100 Subject: [PATCH 079/135] rtc-mrst: Fix section types Fix the following section mismatch warning. WARNING: drivers/rtc/built-in.o(.data+0xa0): Section mismatch in reference from the variable vrtc_mrst_platform_driver to the function .init.text:vrtc_mrst_platform_probe() The variable vrtc_mrst_platform_driver references the function __init vrtc_mrst_platform_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Major Lee Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-mrst.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c index b86bc328463b..332a2c4a891c 100644 --- a/drivers/rtc/rtc-mrst.c +++ b/drivers/rtc/rtc-mrst.c @@ -319,7 +319,7 @@ static irqreturn_t mrst_rtc_irq(int irq, void *p) return IRQ_NONE; } -static int __init +static int __devinit vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq) { int retval = 0; @@ -391,7 +391,7 @@ static void rtc_mrst_do_shutdown(void) spin_unlock_irq(&rtc_lock); } -static void __exit rtc_mrst_do_remove(struct device *dev) +static void __devexit rtc_mrst_do_remove(struct device *dev) { struct mrst_rtc *mrst = dev_get_drvdata(dev); struct resource *iomem; @@ -500,14 +500,14 @@ static inline int mrst_poweroff(struct device *dev) #endif -static int __init vrtc_mrst_platform_probe(struct platform_device *pdev) +static int __devinit vrtc_mrst_platform_probe(struct platform_device *pdev) { return vrtc_mrst_do_probe(&pdev->dev, platform_get_resource(pdev, IORESOURCE_MEM, 0), platform_get_irq(pdev, 0)); } -static int __exit vrtc_mrst_platform_remove(struct platform_device *pdev) +static int __devexit vrtc_mrst_platform_remove(struct platform_device *pdev) { rtc_mrst_do_remove(&pdev->dev); return 0; @@ -525,7 +525,7 @@ MODULE_ALIAS("platform:vrtc_mrst"); static struct platform_driver vrtc_mrst_platform_driver = { .probe = vrtc_mrst_platform_probe, - .remove = __exit_p(vrtc_mrst_platform_remove), + .remove = __devexit_p(vrtc_mrst_platform_remove), .shutdown = vrtc_mrst_platform_shutdown, .driver = { .name = (char *) driver_name, From 4352d9d44b935e4d000be6ec89ddb55c2bf35f24 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Mon, 4 Apr 2011 08:31:23 -0700 Subject: [PATCH 080/135] ntp: fix non privileged system time shifting The ADJ_SETOFFSET bit added in commit 094aa188 ("ntp: Add ADJ_SETOFFSET mode bit") also introduced a way for any user to change the system time. Sneaky or buggy calls to adjtimex() could set ADJ_OFFSET_SS_READ | ADJ_SETOFFSET which would result in a successful call to timekeeping_inject_offset(). This patch fixes the issue by adding the capability check. Signed-off-by: Richard Cochran Signed-off-by: Linus Torvalds --- kernel/time/ntp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 5f1bb8e2008f..f6117a4c7cb8 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -652,6 +652,8 @@ int do_adjtimex(struct timex *txc) struct timespec delta; delta.tv_sec = txc->time.tv_sec; delta.tv_nsec = txc->time.tv_usec; + if (!capable(CAP_SYS_TIME)) + return -EPERM; if (!(txc->modes & ADJ_NANO)) delta.tv_nsec *= 1000; result = timekeeping_inject_offset(&delta); From 4acfaf829dacb8f8170b439d30065e8d2cfdaac9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 3 Apr 2011 11:42:00 -0700 Subject: [PATCH 081/135] usb/serial: fix function args warnings, dropping *filp Fix build warnings caused by removal of *filp arg in struct usb_serial_driver. These changes were missed somehow in commits 00a0d0d65b61 ("tty: remove filp from the USB tty ioctls") and 60b33c133ca0b ("tiocmget: kill off the passing of the struct file") drivers/usb/serial/mct_u232.c:159: warning: initialization from incompatible pointer type drivers/usb/serial/opticon.c:627: warning: initialization from incompatible pointer type Signed-off-by: Randy Dunlap Cc: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/mct_u232.c | 4 ++-- drivers/usb/serial/opticon.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index d2c019637e45..ba0d28727ccb 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -106,7 +106,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); static int mct_u232_tiocmget(struct tty_struct *tty); static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int mct_u232_ioctl(struct tty_struct *tty, struct file *file, +static int mct_u232_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int mct_u232_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); @@ -874,7 +874,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty) } } -static int mct_u232_ioctl(struct tty_struct *tty, struct file *file, +static int mct_u232_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { DEFINE_WAIT(wait); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 201f6096844b..a1dd4d4fa192 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -413,7 +413,7 @@ static int opticon_tiocmget(struct tty_struct *tty) return result; } -static int opticon_tiocmset(struct tty_struct *tty, struct file *file, +static int opticon_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; From 738faca34335cd1d5d87fa7c58703139c7fa15bd Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Mon, 4 Apr 2011 13:07:26 -0700 Subject: [PATCH 082/135] ipv6: Don't pass invalid dst_entry pointer to dst_release(). Make sure dst_release() is not called with error pointer. This is similar to commit 4910ac6c526d2868adcb5893e0c428473de862b5 ("ipv4: Don't ip_rt_put() an error pointer in RAW sockets."). Signed-off-by: Boris Ostrovsky Signed-off-by: David S. Miller --- net/ipv6/tcp_ipv6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 2b0c186862c8..56fa12538d45 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -503,6 +503,7 @@ static int tcp_v6_send_synack(struct sock *sk, struct request_sock *req, dst = ip6_dst_lookup_flow(sk, &fl6, final_p, false); if (IS_ERR(dst)) { err = PTR_ERR(dst); + dst = NULL; goto done; } skb = tcp_make_synack(sk, dst, req, rvp); From a5660b41af6a28f8004e70eb261e1202ad55c5e3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 4 Apr 2011 14:26:54 -0700 Subject: [PATCH 083/135] tty: fix endless work loop when the buffer fills up Commit f23eb2b2b285 ('tty: stop using "delayed_work" in the tty layer') ended up causing hung machines on UP with no preemption, because the work routine to flip the buffer data to the ldisc would endlessly re-arm itself if the destination buffer had filled up. With the delayed work, that only caused a timer-driving polling of the tty state every timer tick, but without the delay we just ended up with basically a busy loop instead. Stop the insane polling, and instead make the code that opens up the receive room re-schedule the buffer flip work. That's what we should have been doing anyway. This same "poll for tty room" issue is almost certainly also the cause of excessive kworker activity when idle reported by Dave Jones, who also reported "flush_to_ldisc executing 2500 times a second" back in Nov 2010: http://lkml.org/lkml/2010/11/30/592 which is that silly flushing done every timer tick. Wasting both power and CPU for no good reason. Reported-and-tested-by: Alexander Beregalov Reported-and-tested-by: Sitsofe Wheeler Cc: Greg KH Cc: Alan Cox Cc: Dave Jones Signed-off-by: Linus Torvalds --- drivers/tty/n_tty.c | 6 ++++++ drivers/tty/tty_buffer.c | 4 +--- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 428f4fe0b5f7..0ad32888091c 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -95,6 +95,7 @@ static void n_tty_set_room(struct tty_struct *tty) { /* tty->read_cnt is not read locked ? */ int left = N_TTY_BUF_SIZE - tty->read_cnt - 1; + int old_left; /* * If we are doing input canonicalization, and there are no @@ -104,7 +105,12 @@ static void n_tty_set_room(struct tty_struct *tty) */ if (left <= 0) left = tty->icanon && !tty->canon_data; + old_left = tty->receive_room; tty->receive_room = left; + + /* Did this open up the receive buffer? We may need to flip */ + if (left && !old_left) + schedule_work(&tty->buf.work); } static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty) diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index b9451219528b..f1a7918d71aa 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -442,10 +442,8 @@ static void flush_to_ldisc(struct work_struct *work) line discipline as we want to empty the queue */ if (test_bit(TTY_FLUSHPENDING, &tty->flags)) break; - if (!tty->receive_room || seen_tail) { - schedule_work(&tty->buf.work); + if (!tty->receive_room || seen_tail) break; - } if (count > tty->receive_room) count = tty->receive_room; char_buf = head->char_buf_ptr + head->read; From 758f231ea280d0e5f01d537f26ad8f5c0e3de1cc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 4 Apr 2011 11:03:16 -0400 Subject: [PATCH 084/135] drm/radeon/kms: add some new ontario pci ids Signed-off-by: Alex Deucher Cc:stable@kernel.org Signed-off-by: Dave Airlie --- include/drm/drm_pciids.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 820ee9029482..816e30cbd968 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -472,6 +472,8 @@ {0x1002, 0x9803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9804, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0, 0, 0} #define r128_PCI_IDS \ From 5df23979bc628934febe02e80f9644ec67603ee8 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Mon, 4 Apr 2011 01:25:18 +0200 Subject: [PATCH 085/135] drm: fix "persistant" typo Signed-off-by: Jan Engelhardt Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_gem.c | 2 +- drivers/gpu/drm/ttm/ttm_bo.c | 10 +++++----- drivers/gpu/drm/ttm/ttm_tt.c | 16 ++++++++-------- include/drm/ttm/ttm_bo_api.h | 18 +++++++++--------- include/drm/ttm/ttm_bo_driver.h | 4 ++-- 5 files changed, 25 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index e8b04f4aed7e..b52e46018245 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -97,7 +97,7 @@ nouveau_gem_new(struct drm_device *dev, struct nouveau_channel *chan, return -ENOMEM; } - nvbo->bo.persistant_swap_storage = nvbo->gem->filp; + nvbo->bo.persistent_swap_storage = nvbo->gem->filp; nvbo->gem->driver_private = nvbo; return 0; } diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 0b6a55ac2f87..2e618b5ac465 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1168,7 +1168,7 @@ int ttm_bo_init(struct ttm_bo_device *bdev, uint32_t page_alignment, unsigned long buffer_start, bool interruptible, - struct file *persistant_swap_storage, + struct file *persistent_swap_storage, size_t acc_size, void (*destroy) (struct ttm_buffer_object *)) { @@ -1211,7 +1211,7 @@ int ttm_bo_init(struct ttm_bo_device *bdev, bo->priv_flags = 0; bo->mem.placement = (TTM_PL_FLAG_SYSTEM | TTM_PL_FLAG_CACHED); bo->seq_valid = false; - bo->persistant_swap_storage = persistant_swap_storage; + bo->persistent_swap_storage = persistent_swap_storage; bo->acc_size = acc_size; atomic_inc(&bo->glob->bo_count); @@ -1260,7 +1260,7 @@ int ttm_bo_create(struct ttm_bo_device *bdev, uint32_t page_alignment, unsigned long buffer_start, bool interruptible, - struct file *persistant_swap_storage, + struct file *persistent_swap_storage, struct ttm_buffer_object **p_bo) { struct ttm_buffer_object *bo; @@ -1282,7 +1282,7 @@ int ttm_bo_create(struct ttm_bo_device *bdev, ret = ttm_bo_init(bdev, bo, size, type, placement, page_alignment, buffer_start, interruptible, - persistant_swap_storage, acc_size, NULL); + persistent_swap_storage, acc_size, NULL); if (likely(ret == 0)) *p_bo = bo; @@ -1863,7 +1863,7 @@ static int ttm_bo_swapout(struct ttm_mem_shrink *shrink) if (bo->bdev->driver->swap_notify) bo->bdev->driver->swap_notify(bo); - ret = ttm_tt_swapout(bo->ttm, bo->persistant_swap_storage); + ret = ttm_tt_swapout(bo->ttm, bo->persistent_swap_storage); out: /** diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 86d5b1745a45..90e23e0bfadb 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -332,7 +332,7 @@ void ttm_tt_destroy(struct ttm_tt *ttm) ttm_tt_free_page_directory(ttm); } - if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP) && + if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTENT_SWAP) && ttm->swap_storage) fput(ttm->swap_storage); @@ -503,7 +503,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm) page_cache_release(from_page); } - if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP)) + if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTENT_SWAP)) fput(swap_storage); ttm->swap_storage = NULL; ttm->page_flags &= ~TTM_PAGE_FLAG_SWAPPED; @@ -514,7 +514,7 @@ out_err: return ret; } -int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage) +int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage) { struct address_space *swap_space; struct file *swap_storage; @@ -540,7 +540,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage) return 0; } - if (!persistant_swap_storage) { + if (!persistent_swap_storage) { swap_storage = shmem_file_setup("ttm swap", ttm->num_pages << PAGE_SHIFT, 0); @@ -549,7 +549,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage) return PTR_ERR(swap_storage); } } else - swap_storage = persistant_swap_storage; + swap_storage = persistent_swap_storage; swap_space = swap_storage->f_path.dentry->d_inode->i_mapping; @@ -577,12 +577,12 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage) ttm_tt_free_alloced_pages(ttm); ttm->swap_storage = swap_storage; ttm->page_flags |= TTM_PAGE_FLAG_SWAPPED; - if (persistant_swap_storage) - ttm->page_flags |= TTM_PAGE_FLAG_PERSISTANT_SWAP; + if (persistent_swap_storage) + ttm->page_flags |= TTM_PAGE_FLAG_PERSISTENT_SWAP; return 0; out_err: - if (!persistant_swap_storage) + if (!persistent_swap_storage) fput(swap_storage); return ret; diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h index 50852aad260a..a6bd117c9ff1 100644 --- a/include/drm/ttm/ttm_bo_api.h +++ b/include/drm/ttm/ttm_bo_api.h @@ -158,9 +158,9 @@ struct ttm_tt; * the object is destroyed. * @event_queue: Queue for processes waiting on buffer object status change. * @mem: structure describing current placement. - * @persistant_swap_storage: Usually the swap storage is deleted for buffers + * @persistent_swap_storage: Usually the swap storage is deleted for buffers * pinned in physical memory. If this behaviour is not desired, this member - * holds a pointer to a persistant shmem object. + * holds a pointer to a persistent shmem object. * @ttm: TTM structure holding system pages. * @evicted: Whether the object was evicted without user-space knowing. * @cpu_writes: For synchronization. Number of cpu writers. @@ -221,7 +221,7 @@ struct ttm_buffer_object { */ struct ttm_mem_reg mem; - struct file *persistant_swap_storage; + struct file *persistent_swap_storage; struct ttm_tt *ttm; bool evicted; @@ -459,9 +459,9 @@ extern void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo); * user buffer object. * @interruptible: If needing to sleep to wait for GPU resources, * sleep interruptible. - * @persistant_swap_storage: Usually the swap storage is deleted for buffers + * @persistent_swap_storage: Usually the swap storage is deleted for buffers * pinned in physical memory. If this behaviour is not desired, this member - * holds a pointer to a persistant shmem object. Typically, this would + * holds a pointer to a persistent shmem object. Typically, this would * point to the shmem object backing a GEM object if TTM is used to back a * GEM user interface. * @acc_size: Accounted size for this object. @@ -490,7 +490,7 @@ extern int ttm_bo_init(struct ttm_bo_device *bdev, uint32_t page_alignment, unsigned long buffer_start, bool interrubtible, - struct file *persistant_swap_storage, + struct file *persistent_swap_storage, size_t acc_size, void (*destroy) (struct ttm_buffer_object *)); /** @@ -506,9 +506,9 @@ extern int ttm_bo_init(struct ttm_bo_device *bdev, * user buffer object. * @interruptible: If needing to sleep while waiting for GPU resources, * sleep interruptible. - * @persistant_swap_storage: Usually the swap storage is deleted for buffers + * @persistent_swap_storage: Usually the swap storage is deleted for buffers * pinned in physical memory. If this behaviour is not desired, this member - * holds a pointer to a persistant shmem object. Typically, this would + * holds a pointer to a persistent shmem object. Typically, this would * point to the shmem object backing a GEM object if TTM is used to back a * GEM user interface. * @p_bo: On successful completion *p_bo points to the created object. @@ -528,7 +528,7 @@ extern int ttm_bo_create(struct ttm_bo_device *bdev, uint32_t page_alignment, unsigned long buffer_start, bool interruptible, - struct file *persistant_swap_storage, + struct file *persistent_swap_storage, struct ttm_buffer_object **p_bo); /** diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index efed0820d9fa..960b52181d4e 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -122,7 +122,7 @@ struct ttm_backend { #define TTM_PAGE_FLAG_USER_DIRTY (1 << 2) #define TTM_PAGE_FLAG_WRITE (1 << 3) #define TTM_PAGE_FLAG_SWAPPED (1 << 4) -#define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5) +#define TTM_PAGE_FLAG_PERSISTENT_SWAP (1 << 5) #define TTM_PAGE_FLAG_ZERO_ALLOC (1 << 6) #define TTM_PAGE_FLAG_DMA32 (1 << 7) @@ -714,7 +714,7 @@ extern void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages); */ extern int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement); extern int ttm_tt_swapout(struct ttm_tt *ttm, - struct file *persistant_swap_storage); + struct file *persistent_swap_storage); /* * ttm_bo.c From 21b86bd5a838ee882d36d354185e29650b0757dd Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Mon, 4 Apr 2011 14:58:03 -0700 Subject: [PATCH 086/135] Documentation: update kmemleak arch. info Besides x86 and arm, kmemleak now supports powerpc, sparc, sh, microblaze and tile. Signed-off-by: Daniel Baluta Acked-by: Catalin Marinas Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/kmemleak.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt index 34f6638aa5ac..090e6ee04536 100644 --- a/Documentation/kmemleak.txt +++ b/Documentation/kmemleak.txt @@ -11,6 +11,7 @@ with the difference that the orphan objects are not freed but only reported via /sys/kernel/debug/kmemleak. A similar method is used by the Valgrind tool (memcheck --leak-check) to detect the memory leaks in user-space applications. +Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile. Usage ----- @@ -178,5 +179,4 @@ block doesn't need to be freed (some cases in the init_call functions), the pointer is calculated by other methods than the usual container_of macro or the pointer is stored in a location not scanned by kmemleak. -Page allocations and ioremap are not tracked. Only the ARM and x86 -architectures are currently supported. +Page allocations and ioremap are not tracked. From 5aba085ededa6c5a1ff465e2aebc3e8eb00a7567 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 4 Apr 2011 14:59:31 -0700 Subject: [PATCH 087/135] kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- kernel/signal.c | 90 ++++++++++++++++++++++++++----------------------- 1 file changed, 48 insertions(+), 42 deletions(-) diff --git a/kernel/signal.c b/kernel/signal.c index 1186cf7fac77..3ab90e8b6ecf 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -226,7 +226,7 @@ static inline void print_dropped_signal(int sig) /* * allocate a new signal queue record * - this may be called without locks if and only if t == current, otherwise an - * appopriate lock must be held to stop the target task from exiting + * appropriate lock must be held to stop the target task from exiting */ static struct sigqueue * __sigqueue_alloc(int sig, struct task_struct *t, gfp_t flags, int override_rlimit) @@ -375,15 +375,15 @@ int unhandled_signal(struct task_struct *tsk, int sig) return !tracehook_consider_fatal_signal(tsk, sig); } - -/* Notify the system that a driver wants to block all signals for this +/* + * Notify the system that a driver wants to block all signals for this * process, and wants to be notified if any signals at all were to be * sent/acted upon. If the notifier routine returns non-zero, then the * signal will be acted upon after all. If the notifier routine returns 0, * then then signal will be blocked. Only one block per process is * allowed. priv is a pointer to private data that the notifier routine - * can use to determine if the signal should be blocked or not. */ - + * can use to determine if the signal should be blocked or not. + */ void block_all_signals(int (*notifier)(void *priv), void *priv, sigset_t *mask) { @@ -434,9 +434,10 @@ still_pending: copy_siginfo(info, &first->info); __sigqueue_free(first); } else { - /* Ok, it wasn't in the queue. This must be - a fast-pathed signal or we must have been - out of queue space. So zero out the info. + /* + * Ok, it wasn't in the queue. This must be + * a fast-pathed signal or we must have been + * out of queue space. So zero out the info. */ info->si_signo = sig; info->si_errno = 0; @@ -468,7 +469,7 @@ static int __dequeue_signal(struct sigpending *pending, sigset_t *mask, } /* - * Dequeue a signal and return the element to the caller, which is + * Dequeue a signal and return the element to the caller, which is * expected to free it. * * All callers have to hold the siglock. @@ -490,7 +491,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) * itimers are process shared and we restart periodic * itimers in the signal delivery path to prevent DoS * attacks in the high resolution timer case. This is - * compliant with the old way of self restarting + * compliant with the old way of self-restarting * itimers, as the SIGALRM is a legacy signal and only * queued once. Changing the restart behaviour to * restart the timer in the signal dequeue path is @@ -923,14 +924,15 @@ static int __send_signal(int sig, struct siginfo *info, struct task_struct *t, if (info == SEND_SIG_FORCED) goto out_set; - /* Real-time signals must be queued if sent by sigqueue, or - some other real-time mechanism. It is implementation - defined whether kill() does so. We attempt to do so, on - the principle of least surprise, but since kill is not - allowed to fail with EAGAIN when low on memory we just - make sure at least one signal gets delivered and don't - pass on the info struct. */ - + /* + * Real-time signals must be queued if sent by sigqueue, or + * some other real-time mechanism. It is implementation + * defined whether kill() does so. We attempt to do so, on + * the principle of least surprise, but since kill is not + * allowed to fail with EAGAIN when low on memory we just + * make sure at least one signal gets delivered and don't + * pass on the info struct. + */ if (sig < SIGRTMIN) override_rlimit = (is_si_special(info) || info->si_code >= 0); else @@ -1201,8 +1203,7 @@ retry: return error; } -int -kill_proc_info(int sig, struct siginfo *info, pid_t pid) +int kill_proc_info(int sig, struct siginfo *info, pid_t pid) { int error; rcu_read_lock(); @@ -1299,8 +1300,7 @@ static int kill_something_info(int sig, struct siginfo *info, pid_t pid) * These are for backward compatibility with the rest of the kernel source. */ -int -send_sig_info(int sig, struct siginfo *info, struct task_struct *p) +int send_sig_info(int sig, struct siginfo *info, struct task_struct *p) { /* * Make sure legacy kernel users don't send in bad values @@ -1368,7 +1368,7 @@ EXPORT_SYMBOL(kill_pid); * These functions support sending signals using preallocated sigqueue * structures. This is needed "because realtime applications cannot * afford to lose notifications of asynchronous events, like timer - * expirations or I/O completions". In the case of Posix Timers + * expirations or I/O completions". In the case of POSIX Timers * we allocate the sigqueue structure from the timer_create. If this * allocation fails we are able to report the failure to the application * with an EAGAIN error. @@ -1553,7 +1553,7 @@ static void do_notify_parent_cldstop(struct task_struct *tsk, int why) info.si_signo = SIGCHLD; info.si_errno = 0; /* - * see comment in do_notify_parent() abot the following 3 lines + * see comment in do_notify_parent() about the following 4 lines */ rcu_read_lock(); info.si_pid = task_pid_nr_ns(tsk, parent->nsproxy->pid_ns); @@ -1611,7 +1611,7 @@ static inline int may_ptrace_stop(void) } /* - * Return nonzero if there is a SIGKILL that should be waking us up. + * Return non-zero if there is a SIGKILL that should be waking us up. * Called with the siglock held. */ static int sigkill_pending(struct task_struct *tsk) @@ -1735,7 +1735,7 @@ void ptrace_notify(int exit_code) /* * This performs the stopping for SIGSTOP and other stop signals. * We have to stop all threads in the thread group. - * Returns nonzero if we've actually stopped and released the siglock. + * Returns non-zero if we've actually stopped and released the siglock. * Returns zero if we didn't stop and still hold the siglock. */ static int do_signal_stop(int signr) @@ -1823,10 +1823,12 @@ static int ptrace_signal(int signr, siginfo_t *info, current->exit_code = 0; - /* Update the siginfo structure if the signal has - changed. If the debugger wanted something - specific in the siginfo structure then it should - have updated *info via PTRACE_SETSIGINFO. */ + /* + * Update the siginfo structure if the signal has + * changed. If the debugger wanted something + * specific in the siginfo structure then it should + * have updated *info via PTRACE_SETSIGINFO. + */ if (signr != info->si_signo) { info->si_signo = signr; info->si_errno = 0; @@ -2034,7 +2036,8 @@ void exit_signals(struct task_struct *tsk) if (!signal_pending(tsk)) goto out; - /* It could be that __group_complete_signal() choose us to + /* + * It could be that __group_complete_signal() choose us to * notify about group-wide signal. Another thread should be * woken now to take the signal since we will not. */ @@ -2183,7 +2186,7 @@ long do_sigpending(void __user *set, unsigned long sigsetsize) out: return error; -} +} SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, set, size_t, sigsetsize) { @@ -2233,9 +2236,9 @@ int copy_siginfo_to_user(siginfo_t __user *to, siginfo_t *from) err |= __put_user(from->si_trapno, &to->si_trapno); #endif #ifdef BUS_MCEERR_AO - /* + /* * Other callers might not initialize the si_lsb field, - * so check explicitely for the right codes here. + * so check explicitly for the right codes here. */ if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO) err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb); @@ -2280,7 +2283,7 @@ SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese, if (copy_from_user(&these, uthese, sizeof(these))) return -EFAULT; - + /* * Invert the set of allowed signals to get those we * want to block. @@ -2305,9 +2308,11 @@ SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese, + (ts.tv_sec || ts.tv_nsec)); if (timeout) { - /* None ready -- temporarily unblock those we're + /* + * None ready -- temporarily unblock those we're * interested while we are sleeping in so that we'll - * be awakened when they arrive. */ + * be awakened when they arrive. + */ current->real_blocked = current->blocked; sigandsets(¤t->blocked, ¤t->blocked, &these); recalc_sigpending(); @@ -2553,12 +2558,11 @@ do_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, unsigned long s error = -EINVAL; /* - * - * Note - this code used to test ss_flags incorrectly + * Note - this code used to test ss_flags incorrectly: * old code may have been written using ss_flags==0 * to mean ss_flags==SS_ONSTACK (as this was the only * way that worked) - this fix preserves that older - * mechanism + * mechanism. */ if (ss_flags != SS_DISABLE && ss_flags != SS_ONSTACK && ss_flags != 0) goto out; @@ -2600,8 +2604,10 @@ SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set) #endif #ifdef __ARCH_WANT_SYS_SIGPROCMASK -/* Some platforms have their own version with special arguments others - support only sys_rt_sigprocmask. */ +/* + * Some platforms have their own version with special arguments; + * others support only sys_rt_sigprocmask. + */ SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, set, old_sigset_t __user *, oset) From 41c57892a2895865afc89ff1a21f91a0f1506f66 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 4 Apr 2011 15:00:26 -0700 Subject: [PATCH 088/135] kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- kernel/signal.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 63 insertions(+), 2 deletions(-) diff --git a/kernel/signal.c b/kernel/signal.c index 3ab90e8b6ecf..dc17929ab78a 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -2075,6 +2075,9 @@ EXPORT_SYMBOL(unblock_all_signals); * System call entry points. */ +/** + * sys_restart_syscall - restart a system call + */ SYSCALL_DEFINE0(restart_syscall) { struct restart_block *restart = ¤t_thread_info()->restart_block; @@ -2128,6 +2131,13 @@ int sigprocmask(int how, sigset_t *set, sigset_t *oldset) return error; } +/** + * sys_rt_sigprocmask - change the list of currently blocked signals + * @how: whether to add, remove, or set signals + * @set: stores pending signals + * @oset: previous value of signal mask if non-null + * @sigsetsize: size of sigset_t type + */ SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, set, sigset_t __user *, oset, size_t, sigsetsize) { @@ -2188,6 +2198,12 @@ out: return error; } +/** + * sys_rt_sigpending - examine a pending signal that has been raised + * while blocked + * @set: stores pending signals + * @sigsetsize: size of sigset_t type or larger + */ SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, set, size_t, sigsetsize) { return do_sigpending(set, sigsetsize); @@ -2267,6 +2283,14 @@ int copy_siginfo_to_user(siginfo_t __user *to, siginfo_t *from) #endif +/** + * sys_rt_sigtimedwait - synchronously wait for queued signals specified + * in @uthese + * @uthese: queued signals to wait for + * @uinfo: if non-null, the signal's siginfo is returned here + * @uts: upper bound on process time suspension + * @sigsetsize: size of sigset_t type + */ SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese, siginfo_t __user *, uinfo, const struct timespec __user *, uts, size_t, sigsetsize) @@ -2344,6 +2368,11 @@ SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese, return ret; } +/** + * sys_kill - send a signal to a process + * @pid: the PID of the process + * @sig: signal to be sent + */ SYSCALL_DEFINE2(kill, pid_t, pid, int, sig) { struct siginfo info; @@ -2419,7 +2448,11 @@ SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig) return do_tkill(tgid, pid, sig); } -/* +/** + * sys_tkill - send signal to one specific task + * @pid: the PID of the task + * @sig: signal to be sent + * * Send a signal to only one task, even if it's a CLONE_THREAD task. */ SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig) @@ -2431,6 +2464,12 @@ SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig) return do_tkill(0, pid, sig); } +/** + * sys_rt_sigqueueinfo - send signal information to a signal + * @pid: the PID of the thread + * @sig: signal to be sent + * @uinfo: signal info to be sent + */ SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig, siginfo_t __user *, uinfo) { @@ -2596,6 +2635,10 @@ out: #ifdef __ARCH_WANT_SYS_SIGPENDING +/** + * sys_sigpending - examine pending signals + * @set: where mask of pending signal is returned + */ SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set) { return do_sigpending(set, sizeof(*set)); @@ -2604,7 +2647,12 @@ SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set) #endif #ifdef __ARCH_WANT_SYS_SIGPROCMASK -/* +/** + * sys_sigprocmask - examine and change blocked signals + * @how: whether to add, remove, or set signals + * @set: signals to add or remove (if non-null) + * @oset: previous value of signal mask if non-null + * * Some platforms have their own version with special arguments; * others support only sys_rt_sigprocmask. */ @@ -2660,6 +2708,13 @@ out: #endif /* __ARCH_WANT_SYS_SIGPROCMASK */ #ifdef __ARCH_WANT_SYS_RT_SIGACTION +/** + * sys_rt_sigaction - alter an action taken by a process + * @sig: signal to be sent + * @act: the thread group ID of the thread + * @oact: the PID of the thread + * @sigsetsize: size of sigset_t type + */ SYSCALL_DEFINE4(rt_sigaction, int, sig, const struct sigaction __user *, act, struct sigaction __user *, oact, @@ -2746,6 +2801,12 @@ SYSCALL_DEFINE0(pause) #endif #ifdef __ARCH_WANT_SYS_RT_SIGSUSPEND +/** + * sys_rt_sigsuspend - replace the signal mask for a value with the + * @unewset value until a signal is received + * @unewset: new signal mask value + * @sigsetsize: size of sigset_t type + */ SYSCALL_DEFINE2(rt_sigsuspend, sigset_t __user *, unewset, size_t, sigsetsize) { sigset_t newset; From 44a4dcf75c58157a5d036ff783dfb2254703b93e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 4 Apr 2011 15:02:24 -0700 Subject: [PATCH 089/135] Documentation: update panic parameter info Add a little more info for some of the panic-related kernel parameters. Fix "oops=panic" to fit in 80 columns. Signed-off-by: Randy Dunlap Reviewed-by: Jesper Juhl Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c357a31411cd..f2e5f3f72c8d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1832,15 +1832,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted. perfmon on Intel CPUs instead of the CPU specific event set. - oops=panic Always panic on oopses. Default is to just kill the process, - but there is a small probability of deadlocking the machine. + oops=panic Always panic on oopses. Default is to just kill the + process, but there is a small probability of + deadlocking the machine. This will also cause panics on machine check exceptions. Useful together with panic=30 to trigger a reboot. OSS [HW,OSS] See Documentation/sound/oss/oss-parameters.txt - panic= [KNL] Kernel behaviour on panic + panic= [KNL] Kernel behaviour on panic: delay + seconds before rebooting Format: parkbd.port= [HW] Parallel port number the keyboard adapter is @@ -2343,6 +2345,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. softlockup_panic= [KNL] Should the soft-lockup detector generate panics. + Format: sonypi.*= [HW] Sony Programmable I/O Control Device driver See Documentation/sonypi.txt @@ -2529,8 +2532,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. reported either. unknown_nmi_panic - [X86] - Set unknown_nmi_panic=1 early on boot. + [X86] Cause panic on unknown NMI. usbcore.autosuspend= [USB] The autosuspend time delay (in seconds) used From f65e51d740688b8a0ad15cbde34974e6c4559972 Mon Sep 17 00:00:00 2001 From: Sylvestre Ledru Date: Mon, 4 Apr 2011 15:04:46 -0700 Subject: [PATCH 090/135] Documentation: fix minor typos/spelling Fix some minor typos: * informations => information * there own => their own * these => this Signed-off-by: Sylvestre Ledru Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-driver-hid-roccat-kone | 2 +- .../ABI/testing/sysfs-driver-hid-roccat-koneplus | 8 ++++---- .../ABI/testing/sysfs-driver-hid-roccat-kovaplus | 8 ++++---- Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra | 8 ++++---- Documentation/ABI/testing/sysfs-platform-asus-laptop | 2 +- Documentation/devicetree/booting-without-of.txt | 6 +++--- Documentation/dvb/udev.txt | 2 +- Documentation/edac.txt | 2 +- Documentation/kernel-parameters.txt | 4 ++-- Documentation/laptops/asus-laptop.txt | 4 ++-- Documentation/networking/batman-adv.txt | 2 +- Documentation/s390/Debugging390.txt | 2 +- Documentation/scsi/sym53c8xx_2.txt | 2 +- Documentation/sound/alsa/ALSA-Configuration.txt | 2 +- Documentation/sound/oss/AudioExcelDSP16 | 6 +++--- Documentation/sound/oss/README.ymfsb | 2 +- Documentation/video4linux/bttv/Insmod-options | 2 +- Documentation/video4linux/bttv/Sound-FAQ | 2 +- Documentation/video4linux/et61x251.txt | 4 ++-- Documentation/video4linux/sn9c102.txt | 4 ++-- Documentation/video4linux/w9968cf.txt | 2 +- Documentation/video4linux/zc0301.txt | 6 +++--- arch/powerpc/mm/tlb_low_64e.S | 2 +- arch/powerpc/platforms/Kconfig | 2 +- 24 files changed, 43 insertions(+), 43 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone index b4c4f158ab9c..3ca3971109bf 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone @@ -40,7 +40,7 @@ What: /sys/bus/usb/devices/-:./ Description: The mouse can store 5 profiles which can be switched by the - press of a button. A profile holds informations like button + press of a button. A profile holds information like button mappings, sensitivity, the colors of the 5 leds and light effects. When read, these files return the respective profile. The diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus index 00efced73969..326e05452da7 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus @@ -33,7 +33,7 @@ Date: August 2010 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When written, this file lets one write the respective profile buttons back to the mouse. The data has to be 77 bytes long. The mouse will reject invalid data. @@ -47,7 +47,7 @@ Date: August 2010 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When read, these files return the respective profile buttons. The returned data is 77 bytes in size. This file is readonly. @@ -58,7 +58,7 @@ Date: October 2010 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When written, this file lets one write the respective profile settings back to the mouse. The data has to be 43 bytes long. @@ -73,7 +73,7 @@ Date: August 2010 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When read, these files return the respective profile settings. The returned data is 43 bytes in size. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus index fdfa16f8189b..20f937c9d84f 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus @@ -52,7 +52,7 @@ Date: January 2011 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When written, this file lets one write the respective profile buttons back to the mouse. The data has to be 23 bytes long. The mouse will reject invalid data. @@ -66,7 +66,7 @@ Date: January 2011 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When read, these files return the respective profile buttons. The returned data is 23 bytes in size. This file is readonly. @@ -77,7 +77,7 @@ Date: January 2011 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When written, this file lets one write the respective profile settings back to the mouse. The data has to be 16 bytes long. @@ -92,7 +92,7 @@ Date: January 2011 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When read, these files return the respective profile settings. The returned data is 16 bytes in size. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra index 5fab71af3c46..3f8de50e4ff1 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra @@ -39,7 +39,7 @@ Date: August 2010 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When written, this file lets one write the respective profile settings back to the mouse. The data has to be 13 bytes long. @@ -54,7 +54,7 @@ Date: August 2010 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When read, these files return the respective profile settings. The returned data is 13 bytes in size. @@ -66,7 +66,7 @@ Date: August 2010 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When written, this file lets one write the respective profile buttons back to the mouse. The data has to be 19 bytes long. The mouse will reject invalid data. @@ -80,7 +80,7 @@ Date: August 2010 Contact: Stefan Achatz Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When read, these files return the respective profile buttons. The returned data is 19 bytes in size. This file is readonly. diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop index 41ff8ae4dee0..cd9d667c3da2 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-laptop +++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop @@ -27,7 +27,7 @@ KernelVersion: 2.6.20 Contact: "Corentin Chary" Description: Some models like the W1N have a LED display that can be - used to display several informations. + used to display several items of information. To control the LED display, use the following : echo 0x0T000DDD > /sys/devices/platform/asus_laptop/ where T control the 3 letters display, and DDD the 3 digits display. diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 55fd2623445b..50619a0720a8 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -138,7 +138,7 @@ and properties to be present. This will be described in detail in section III, but, for example, the kernel does not require you to create a node for every PCI device in the system. It is a requirement to have a node for PCI host bridges in order to provide interrupt -routing informations and memory/IO ranges, among others. It is also +routing information and memory/IO ranges, among others. It is also recommended to define nodes for on chip devices and other buses that don't specifically fit in an existing OF specification. This creates a great flexibility in the way the kernel can then probe those and match @@ -385,7 +385,7 @@ struct boot_param_header { among others, by kexec. If you are on an SMP system, this value should match the content of the "reg" property of the CPU node in the device-tree corresponding to the CPU calling the kernel entry - point (see further chapters for more informations on the required + point (see further chapters for more information on the required device-tree contents) - size_dt_strings @@ -553,7 +553,7 @@ looks like in practice. This tree is almost a minimal tree. It pretty much contains the minimal set of required nodes and properties to boot a linux kernel; -that is, some basic model informations at the root, the CPUs, and the +that is, some basic model information at the root, the CPUs, and the physical memory layout. It also includes misc information passed through /chosen, like in this example, the platform type (mandatory) and the kernel command line arguments (optional). diff --git a/Documentation/dvb/udev.txt b/Documentation/dvb/udev.txt index 68ee224b6aae..412305b7c557 100644 --- a/Documentation/dvb/udev.txt +++ b/Documentation/dvb/udev.txt @@ -1,7 +1,7 @@ The DVB subsystem currently registers to the sysfs subsystem using the "class_simple" interface. -This means that only the basic informations like module loading parameters +This means that only the basic information like module loading parameters are presented through sysfs. Other things that might be interesting are currently *not* available. diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 9ee774de57cd..ccc07c28967e 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -311,7 +311,7 @@ Total Correctable Errors count attribute file: 'ce_noinfo_count' This attribute file displays the number of CEs that - have occurred wherewith no informations as to which DIMM slot + have occurred wherewith no information as to which DIMM slot is having errors. Memory is handicapped, but operational, yet no information is available to indicate which slot the failing memory is in. This count field should be also diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index f2e5f3f72c8d..d2b515000e40 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2478,8 +2478,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. topology= [S390] Format: {off | on} Specify if the kernel should make use of the cpu - topology informations if the hardware supports these. - The scheduler will make use of these informations and + topology information if the hardware supports this. + The scheduler will make use of this information and e.g. base its process migration decisions on it. Default is on. diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt index c1c5be84e4b1..803e51f6768b 100644 --- a/Documentation/laptops/asus-laptop.txt +++ b/Documentation/laptops/asus-laptop.txt @@ -61,7 +61,7 @@ Usage Hotkeys are also reported as input keys (like keyboards) you can check which key are supported using "xev" under X11. - You can get informations on the version of your DSDT table by reading the + You can get information on the version of your DSDT table by reading the /sys/devices/platform/asus-laptop/infos entry. If you have a question or a bug report to do, please include the output of this entry. @@ -178,7 +178,7 @@ LED display ----------- Some models like the W1N have a LED display that can be used to display - several informations. + several items of information. LED display works for the following models: W1000N diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt index 18afcd8afd51..ee496eb2f4a6 100644 --- a/Documentation/networking/batman-adv.txt +++ b/Documentation/networking/batman-adv.txt @@ -72,7 +72,7 @@ folder: # fragmentation gw_sel_class vis_mode -There is a special folder for debugging informations: +There is a special folder for debugging information: # ls /sys/kernel/debug/batman_adv/bat0/ # gateways socket transtable_global vis_data diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index 86f9f74b2b34..efe998becc5b 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -2273,7 +2273,7 @@ IP forwarding is on. There is a lot of useful info in here best found by going in & having a look around, so I'll take you through some entries I consider important. -All the processes running on the machine have there own entry defined by +All the processes running on the machine have their own entry defined by /proc/ So lets have a look at the init process cd /proc/1 diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt index 6f63b7989679..6af8f7a7770f 100644 --- a/Documentation/scsi/sym53c8xx_2.txt +++ b/Documentation/scsi/sym53c8xx_2.txt @@ -285,7 +285,7 @@ from the driver. 7. Profiling information -This driver does not provide profiling informations as did its predecessors. +This driver does not provide profiling information as did its predecessors. This feature was not this useful and added complexity to the code. As the driver code got more complex, I have decided to remove everything that didn't seem actually useful. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3c1eddd9fcc7..181ba5b87cef 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -2229,7 +2229,7 @@ Proc interfaces (/proc/asound) /proc/asound/card#/pcm#[cp]/oss ------------------------------- - String "erase" - erase all additional informations about OSS applications + String "erase" - erase all additional information about OSS applications String " []" - name of application with (higher priority) or without path diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16 index c0f08922993b..e0dc0641b480 100644 --- a/Documentation/sound/oss/AudioExcelDSP16 +++ b/Documentation/sound/oss/AudioExcelDSP16 @@ -1,10 +1,10 @@ Driver ------ -Informations about Audio Excel DSP 16 driver can be found in the source +Information about Audio Excel DSP 16 driver can be found in the source file aedsp16.c Please, read the head of the source before using it. It contain useful -informations. +information. Configuration ------------- @@ -68,7 +68,7 @@ Sound cards supported This driver supports the SC-6000 and SC-6600 based Gallant's sound card. It don't support the Audio Excel DSP 16 III (try the SC-6600 code). I'm working on the III version of the card: if someone have useful -informations about it, please let me know. +information about it, please let me know. For all the non-supported audio cards, you have to boot MS-DOS (or WIN95) activating the audio card with the MS-DOS device driver, then you have to -- and boot Linux. diff --git a/Documentation/sound/oss/README.ymfsb b/Documentation/sound/oss/README.ymfsb index af8a7d3a4e8e..b6b77906b58d 100644 --- a/Documentation/sound/oss/README.ymfsb +++ b/Documentation/sound/oss/README.ymfsb @@ -5,7 +5,7 @@ FIRST OF ALL ============ This code references YAMAHA's sample codes and data sheets. - I respect and thank for all people they made open the informations + I respect and thank for all people they made open the information about YMF7xx cards. And this codes heavily based on Jeff Garzik 's diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options index bbe3ed667d91..14c065fa23ef 100644 --- a/Documentation/video4linux/bttv/Insmod-options +++ b/Documentation/video4linux/bttv/Insmod-options @@ -1,5 +1,5 @@ -Note: "modinfo " prints various informations about a kernel +Note: "modinfo " prints various information about a kernel module, among them a complete and up-to-date list of insmod options. This list tends to be outdated because it is updated manually ... diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ index 1e6328f91083..bc5e41d5d77a 100644 --- a/Documentation/video4linux/bttv/Sound-FAQ +++ b/Documentation/video4linux/bttv/Sound-FAQ @@ -8,7 +8,7 @@ completely by the bt8xx chip, which is common on all boards. But sound is handled in slightly different ways on each board. To handle the grabber boards correctly, there is a array tvcards[] in -bttv-cards.c, which holds the informations required for each board. +bttv-cards.c, which holds the information required for each board. Sound will work only, if the correct entry is used (for video it often makes no difference). The bttv driver prints a line to the kernel log, telling which card type is used. Like this one: diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt index 1247566c4de3..e0cdae491858 100644 --- a/Documentation/video4linux/et61x251.txt +++ b/Documentation/video4linux/et61x251.txt @@ -191,10 +191,10 @@ Syntax: Description: Debugging information level, from 0 to 3: 0 = none (use carefully) 1 = critical errors - 2 = significant informations + 2 = significant information 3 = more verbose messages Level 3 is useful for testing only, when only one device - is used at the same time. It also shows some more informations + is used at the same time. It also shows some more information about the hardware being detected. This module parameter can be changed at runtime thanks to the /sys filesystem interface. Default: 2 diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt index 73de4050d637..b4f67040403a 100644 --- a/Documentation/video4linux/sn9c102.txt +++ b/Documentation/video4linux/sn9c102.txt @@ -214,10 +214,10 @@ Syntax: Description: Debugging information level, from 0 to 3: 0 = none (use carefully) 1 = critical errors - 2 = significant informations + 2 = significant information 3 = more verbose messages Level 3 is useful for testing only. It also shows some more - informations about the hardware being detected. + information about the hardware being detected. This parameter can be changed at runtime thanks to the /sys filesystem interface. Default: 2 diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt index 05138e8aea07..9649450f3b90 100644 --- a/Documentation/video4linux/w9968cf.txt +++ b/Documentation/video4linux/w9968cf.txt @@ -413,7 +413,7 @@ Syntax: Description: Debugging information level, from 0 to 6: 0 = none (use carefully) 1 = critical errors - 2 = significant informations + 2 = significant information 3 = configuration or general messages 4 = warnings 5 = called functions diff --git a/Documentation/video4linux/zc0301.txt b/Documentation/video4linux/zc0301.txt index befdfdacdc5b..b41c83cf09f4 100644 --- a/Documentation/video4linux/zc0301.txt +++ b/Documentation/video4linux/zc0301.txt @@ -181,10 +181,10 @@ Syntax: Description: Debugging information level, from 0 to 3: 0 = none (use carefully) 1 = critical errors - 2 = significant informations + 2 = significant information 3 = more verbose messages Level 3 is useful for testing only, when only one device - is used at the same time. It also shows some more informations + is used at the same time. It also shows some information about the hardware being detected. This module parameter can be changed at runtime thanks to the /sys filesystem interface. Default: 2 @@ -261,7 +261,7 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'. 11. Credits =========== -- Informations about the chip internals needed to enable the I2C protocol have +- Information about the chip internals needed to enable the I2C protocol have been taken from the documentation of the ZC030x Video4Linux1 driver written by Andrew Birkett ; - The initialization values of the ZC0301 controller connected to the PAS202BCB diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index 8526bd9d2aa3..222815112e45 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -431,7 +431,7 @@ virt_page_table_tlb_miss_fault: * The thing is, we know that in normal circumstances, this is * always called as a second level tlb miss for SW load or as a first * level TLB miss for HW load, so we should be able to peek at the - * relevant informations in the first exception frame in the PACA. + * relevant information in the first exception frame in the PACA. * * However, we do need to double check that, because we may just hit * a stray kernel pointer or a userland attack trying to hit those diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 20576829eca5..f7b07720aa30 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -46,7 +46,7 @@ config PPC_OF_BOOT_TRAMPOLINE help Support from booting from Open Firmware or yaboot using an Open Firmware client interface. This enables the kernel to - communicate with open firmware to retrieve system informations + communicate with open firmware to retrieve system information such as the device tree. In case of doubt, say Y From 9718269a7f5f6f3d723dd34e05269579a3ccfc1e Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Mon, 4 Apr 2011 15:06:44 -0700 Subject: [PATCH 091/135] kemleak-test: build as module only mm/kmemleak-test.c is used to provide an example of how kmemleak tool works. Memory is leaked at module unload-time, so building the test in kernel (Y) makes the leaks impossible and the test useless. Qualify DEBUG_KMEMLEAK_TEST config symbol with "depends on m", to restrict module-only building. Signed-off-by: Daniel Baluta Acked-by: Pekka Enberg Acked-by: Catalin Marinas Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- lib/Kconfig.debug | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index df9234c5f9d1..c768bcdda1b7 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -434,11 +434,9 @@ config DEBUG_KMEMLEAK_EARLY_LOG_SIZE config DEBUG_KMEMLEAK_TEST tristate "Simple test for the kernel memory leak detector" - depends on DEBUG_KMEMLEAK + depends on DEBUG_KMEMLEAK && m help - Say Y or M here to build a test for the kernel memory leak - detector. This option enables a module that explicitly leaks - memory. + This option enables a module that explicitly leaks memory. If unsure, say N. From 9a684e19afc630e0763246ee79c0578c1a8eaee8 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Mon, 4 Apr 2011 15:08:46 -0700 Subject: [PATCH 092/135] Documentation: consolidate leds files to leds/ subdir leds: move leds-class documentation under the leds/ subdir. Add also a leds/00-INDEX file describing the files under leds/ Signed-off-by: Antonio Ospite Acked-by: Richard Purdie Cc: Andrew Morton Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/00-INDEX | 4 ++-- Documentation/leds/00-INDEX | 8 ++++++++ Documentation/{ => leds}/leds-class.txt | 1 - Documentation/{ => leds}/leds-lp3944.txt | 0 4 files changed, 10 insertions(+), 3 deletions(-) create mode 100644 Documentation/leds/00-INDEX rename Documentation/{ => leds}/leds-class.txt (99%) rename Documentation/{ => leds}/leds-lp3944.txt (100%) diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index f607367e642f..c17cd4bb2290 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -206,8 +206,8 @@ laptops/ - directory with laptop related info and laptop driver documentation. ldm.txt - a brief description of LDM (Windows Dynamic Disks). -leds-class.txt - - documents LED handling under Linux. +leds/ + - directory with info about LED handling under Linux. local_ops.txt - semantics and behavior of local atomic operations. lockdep-design.txt diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX new file mode 100644 index 000000000000..29f481df32c7 --- /dev/null +++ b/Documentation/leds/00-INDEX @@ -0,0 +1,8 @@ +leds-class.txt + - documents LED handling under Linux. +leds-lp3944.txt + - notes on how to use the leds-lp3944 driver. +leds-lp5521.txt + - notes on how to use the leds-lp5521 driver. +leds-lp5523.txt + - notes on how to use the leds-lp5523 driver. diff --git a/Documentation/leds-class.txt b/Documentation/leds/leds-class.txt similarity index 99% rename from Documentation/leds-class.txt rename to Documentation/leds/leds-class.txt index 58b266bd1846..4996586e27e8 100644 --- a/Documentation/leds-class.txt +++ b/Documentation/leds/leds-class.txt @@ -95,4 +95,3 @@ There are a number of cases where a trigger might only be mappable to a particular LED (ACPI?). The addition of triggers provided by the LED driver should cover this option and be possible to add without breaking the current interface. - diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds/leds-lp3944.txt similarity index 100% rename from Documentation/leds-lp3944.txt rename to Documentation/leds/leds-lp3944.txt From 6ad85239da45d035b2c786f73ec3c2798352c820 Mon Sep 17 00:00:00 2001 From: Geunsik Lim Date: Mon, 4 Apr 2011 15:10:45 -0700 Subject: [PATCH 093/135] Documentation: update cgroups info user groups names Update suitable words to explain / understand cgroups contents. Signed-off-by: Geunsik Lim Cc: Paul Menage Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/cgroups/cgroups.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index cbdfb7d9455b..aedf1bd02fdd 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -110,22 +110,22 @@ university server with various users - students, professors, system tasks etc. The resource planning for this server could be along the following lines: - CPU : Top cpuset + CPU : "Top cpuset" / \ CPUSet1 CPUSet2 - | | - (Profs) (Students) + | | + (Professors) (Students) In addition (system tasks) are attached to topcpuset (so that they can run anywhere) with a limit of 20% - Memory : Professors (50%), students (30%), system (20%) + Memory : Professors (50%), Students (30%), system (20%) - Disk : Prof (50%), students (30%), system (20%) + Disk : Professors (50%), Students (30%), system (20%) Network : WWW browsing (20%), Network File System (60%), others (20%) / \ - Prof (15%) students (5%) + Professors (15%) students (5%) Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go into NFS network class. From c9149235a42ab93914434fff45c44b45023363f3 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Wed, 30 Mar 2011 00:57:23 +0000 Subject: [PATCH 094/135] Btrfs: fix compiler warning in file.c While compiling Btrfs, I got following messages: CC [M] fs/btrfs/file.o fs/btrfs/file.c: In function '__btrfs_buffered_write': fs/btrfs/file.c:909: warning: 'ret' may be used uninitialized in this function CC [M] fs/btrfs/tree-defrag.o This patch fixes compiler warning. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 656bc0a892b1..e621ea54a3fd 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -906,7 +906,7 @@ static noinline ssize_t __btrfs_buffered_write(struct file *file, unsigned long last_index; size_t num_written = 0; int nrptrs; - int ret; + int ret = 0; nrptrs = min((iov_iter_count(i) + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE, PAGE_CACHE_SIZE / From 200da64e0b039f873f0f20481e6a7d056e7cc6c9 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Thu, 31 Mar 2011 00:44:29 +0000 Subject: [PATCH 095/135] Btrfs: fix /proc/mounts info. Some mount options are not displayed by /proc/mounts. This patch displays the option such as compress_type by /proc/mounts. Ex. [before] $ mount | grep sdc2 /dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo) $ cat /proc/mounts | grep sdc2 /dev/sdc2 /test12 btrfs rw,relatime,compress 0 0 [after] $ mount | grep sdc2 /dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo) $ cat /proc/mounts | grep sdc2 /dev/sdc2 /test12 btrfs rw,relatime,compress=lzo,space_cache 0 0 Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/super.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 2edfc039f098..58e7de9cc90c 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -644,6 +644,7 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs) { struct btrfs_root *root = btrfs_sb(vfs->mnt_sb); struct btrfs_fs_info *info = root->fs_info; + char *compress_type; if (btrfs_test_opt(root, DEGRADED)) seq_puts(seq, ",degraded"); @@ -662,8 +663,16 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs) if (info->thread_pool_size != min_t(unsigned long, num_online_cpus() + 2, 8)) seq_printf(seq, ",thread_pool=%d", info->thread_pool_size); - if (btrfs_test_opt(root, COMPRESS)) - seq_puts(seq, ",compress"); + if (btrfs_test_opt(root, COMPRESS)) { + if (info->compress_type == BTRFS_COMPRESS_ZLIB) + compress_type = "zlib"; + else + compress_type = "lzo"; + if (btrfs_test_opt(root, FORCE_COMPRESS)) + seq_printf(seq, ",compress-force=%s", compress_type); + else + seq_printf(seq, ",compress=%s", compress_type); + } if (btrfs_test_opt(root, NOSSD)) seq_puts(seq, ",nossd"); if (btrfs_test_opt(root, SSD_SPREAD)) @@ -678,6 +687,12 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_puts(seq, ",discard"); if (!(root->fs_info->sb->s_flags & MS_POSIXACL)) seq_puts(seq, ",noacl"); + if (btrfs_test_opt(root, SPACE_CACHE)) + seq_puts(seq, ",space_cache"); + if (btrfs_test_opt(root, CLEAR_CACHE)) + seq_puts(seq, ",clear_cache"); + if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED)) + seq_puts(seq, ",user_subvol_rm_allowed"); return 0; } From fe3f566cd19bb6d787c92b2e202c85f929abf3ac Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 28 Mar 2011 08:30:38 +0000 Subject: [PATCH 096/135] Btrfs: Fix oops for defrag with compression turned on When we defrag a file, whose size can be fit into an inline extent, with compression enabled, the compress type is set to be fs_info->compress_type, which is 0 if the btrfs filesystem is mounted without compress option. This leads to oops. Reported-by: Daniel Blueman Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 06274186b290..62ae9d5da806 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -111,6 +111,7 @@ static int btrfs_init_inode_security(struct btrfs_trans_handle *trans, static noinline int insert_inline_extent(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode, u64 start, size_t size, size_t compressed_size, + int compress_type, struct page **compressed_pages) { struct btrfs_key key; @@ -125,12 +126,9 @@ static noinline int insert_inline_extent(struct btrfs_trans_handle *trans, size_t cur_size = size; size_t datasize; unsigned long offset; - int compress_type = BTRFS_COMPRESS_NONE; - if (compressed_size && compressed_pages) { - compress_type = root->fs_info->compress_type; + if (compressed_size && compressed_pages) cur_size = compressed_size; - } path = btrfs_alloc_path(); if (!path) @@ -220,7 +218,7 @@ fail: static noinline int cow_file_range_inline(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode, u64 start, u64 end, - size_t compressed_size, + size_t compressed_size, int compress_type, struct page **compressed_pages) { u64 isize = i_size_read(inode); @@ -253,7 +251,7 @@ static noinline int cow_file_range_inline(struct btrfs_trans_handle *trans, inline_len = min_t(u64, isize, actual_end); ret = insert_inline_extent(trans, root, inode, start, inline_len, compressed_size, - compressed_pages); + compress_type, compressed_pages); BUG_ON(ret); btrfs_delalloc_release_metadata(inode, end + 1 - start); btrfs_drop_extent_cache(inode, start, aligned_end - 1, 0); @@ -432,12 +430,13 @@ again: * to make an uncompressed inline extent. */ ret = cow_file_range_inline(trans, root, inode, - start, end, 0, NULL); + start, end, 0, 0, NULL); } else { /* try making a compressed inline extent */ ret = cow_file_range_inline(trans, root, inode, start, end, - total_compressed, pages); + total_compressed, + compress_type, pages); } if (ret == 0) { /* @@ -791,7 +790,7 @@ static noinline int cow_file_range(struct inode *inode, if (start == 0) { /* lets try to make an inline extent */ ret = cow_file_range_inline(trans, root, inode, - start, end, 0, NULL); + start, end, 0, 0, NULL); if (ret == 0) { extent_clear_unlock_delalloc(inode, &BTRFS_I(inode)->io_tree, From b44c59a80ded004e1a82712e5f9e17b131c03221 Mon Sep 17 00:00:00 2001 From: Johann Lombardi Date: Thu, 31 Mar 2011 13:23:47 +0000 Subject: [PATCH 097/135] Btrfs: fix subvol_sem leak in btrfs_rename() btrfs_rename() does not release the subvol_sem if the transaction failed to start. Signed-off-by: Johann Lombardi Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 62ae9d5da806..1ca3e68586cf 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6961,8 +6961,10 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, * should cover the worst case number of items we'll modify. */ trans = btrfs_start_transaction(root, 20); - if (IS_ERR(trans)) - return PTR_ERR(trans); + if (IS_ERR(trans)) { + ret = PTR_ERR(trans); + goto out_notrans; + } btrfs_set_trans_block_group(trans, new_dir); @@ -7062,7 +7064,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, } out_fail: btrfs_end_transaction_throttle(trans, root); - +out_notrans: if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) up_read(&root->fs_info->subvol_sem); From 8b2b2d3cbefb605501342adaf64d601b545ed154 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Mon, 4 Apr 2011 01:52:13 +0000 Subject: [PATCH 098/135] Btrfs: fix memory leak in btrfs_ioctl_start_sync() Call btrfs_end_transaction() if btrfs_commit_transaction_async() fails. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 6b70e0e2bd1e..255c7c5279c4 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2436,8 +2436,10 @@ static noinline long btrfs_ioctl_start_sync(struct file *file, void __user *argp return PTR_ERR(trans); transid = trans->transid; ret = btrfs_commit_transaction_async(trans, root, 0); - if (ret) + if (ret) { + btrfs_end_transaction(trans, root); return ret; + } if (argp) if (copy_to_user(argp, &transid, sizeof(transid))) From 6e8df2ae89ab37730c0062782f844c66ecfc97a7 Mon Sep 17 00:00:00 2001 From: Yoshinori Sano Date: Sun, 3 Apr 2011 12:31:28 +0000 Subject: [PATCH 099/135] Btrfs: fix memory leak in start_transaction() Free btrfs_trans_handle when join_transaction() fails in start_transaction() Signed-off-by: Yoshinori Sano Signed-off-by: Chris Mason --- fs/btrfs/transaction.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index ce48eb59d615..d01cc249a8d3 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -197,6 +197,7 @@ again: ret = join_transaction(root); if (ret < 0) { + kmem_cache_free(btrfs_trans_handle_cachep, h); if (type != TRANS_JOIN_NOLOCK) mutex_unlock(&root->fs_info->trans_mutex); return ERR_PTR(ret); From adae52b94e18afa1f84fab67df2a8a872c2f5533 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Thu, 31 Mar 2011 09:43:23 +0000 Subject: [PATCH 100/135] btrfs: clear __GFP_FS flag in the space cache inode the object id of the space cache inode's key is allocated from the relative root, just like the regular file. So we can't identify space cache inode by checking the object id of the inode's key, and we have to clear __GFP_FS flag at the time we look up the space cache inode. Signed-off-by: Miao Xie Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 2 ++ fs/btrfs/inode.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 0037427d8a9d..13575de85543 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -81,6 +81,8 @@ struct inode *lookup_free_space_inode(struct btrfs_root *root, return ERR_PTR(-ENOENT); } + inode->i_mapping->flags &= ~__GFP_FS; + spin_lock(&block_group->lock); if (!root->fs_info->closing) { block_group->inode = igrab(inode); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 1ca3e68586cf..57a03f6eb224 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2535,8 +2535,6 @@ static void btrfs_read_locked_inode(struct inode *inode) BTRFS_I(inode)->flags = btrfs_inode_flags(leaf, inode_item); alloc_group_block = btrfs_inode_block_group(leaf, inode_item); - if (location.objectid == BTRFS_FREE_SPACE_OBJECTID) - inode->i_mapping->flags &= ~__GFP_FS; /* * try to precache a NULL acl entry for files that don't have From 08fe4db170b4193603d9d31f40ebaf652d07ac9c Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 28 Mar 2011 02:01:25 +0000 Subject: [PATCH 101/135] Btrfs: Fix uninitialized root flags for subvolumes root_item->flags and root_item->byte_limit are not initialized when a subvolume is created. This bug is not revealed until we added readonly snapshot support - now you mount a btrfs filesystem and you may find the subvolumes in it are readonly. To work around this problem, we steal a bit from root_item->inode_item->flags, and use it to indicate if those fields have been properly initialized. When we read a tree root from disk, we check if the bit is set, and if not we'll set the flag and initialize the two fields of the root item. Reported-by: Andreas Philipp Signed-off-by: Li Zefan Tested-by: Andreas Philipp cc: stable@kernel.org Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 4 ++++ fs/btrfs/disk-io.c | 4 +++- fs/btrfs/ioctl.c | 4 ++++ fs/btrfs/root-tree.c | 18 ++++++++++++++++++ fs/btrfs/transaction.c | 1 + 5 files changed, 30 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index d47ce8307854..3458b5725540 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1284,6 +1284,8 @@ struct btrfs_root { #define BTRFS_INODE_DIRSYNC (1 << 10) #define BTRFS_INODE_COMPRESS (1 << 11) +#define BTRFS_INODE_ROOT_ITEM_INIT (1 << 31) + /* some macros to generate set/get funcs for the struct fields. This * assumes there is a lefoo_to_cpu for every type, so lets make a simple * one for u8: @@ -2359,6 +2361,8 @@ int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid); int btrfs_find_orphan_roots(struct btrfs_root *tree_root); int btrfs_set_root_node(struct btrfs_root_item *item, struct extent_buffer *node); +void btrfs_check_and_init_root_item(struct btrfs_root_item *item); + /* dir-item.c */ int btrfs_insert_dir_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, const char *name, diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 5cf3aa7b125c..a272bfd74ea0 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1276,8 +1276,10 @@ struct btrfs_root *btrfs_read_fs_root_no_radix(struct btrfs_root *tree_root, root->commit_root = btrfs_root_node(root); BUG_ON(!root->node); out: - if (location->objectid != BTRFS_TREE_LOG_OBJECTID) + if (location->objectid != BTRFS_TREE_LOG_OBJECTID) { root->ref_cows = 1; + btrfs_check_and_init_root_item(&root->root_item); + } return root; } diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 255c7c5279c4..f9c93a9ed4a7 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -373,6 +373,10 @@ static noinline int create_subvol(struct btrfs_root *root, inode_item->nbytes = cpu_to_le64(root->leafsize); inode_item->mode = cpu_to_le32(S_IFDIR | 0755); + root_item.flags = 0; + root_item.byte_limit = 0; + inode_item->flags = cpu_to_le64(BTRFS_INODE_ROOT_ITEM_INIT); + btrfs_set_root_bytenr(&root_item, leaf->start); btrfs_set_root_generation(&root_item, trans->transid); btrfs_set_root_level(&root_item, 0); diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 29b2d7c930eb..6928bff62daa 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -473,3 +473,21 @@ again: btrfs_free_path(path); return 0; } + +/* + * Old btrfs forgets to init root_item->flags and root_item->byte_limit + * for subvolumes. To work around this problem, we steal a bit from + * root_item->inode_item->flags, and use it to indicate if those fields + * have been properly initialized. + */ +void btrfs_check_and_init_root_item(struct btrfs_root_item *root_item) +{ + u64 inode_flags = le64_to_cpu(root_item->inode.flags); + + if (!(inode_flags & BTRFS_INODE_ROOT_ITEM_INIT)) { + inode_flags |= BTRFS_INODE_ROOT_ITEM_INIT; + root_item->inode.flags = cpu_to_le64(inode_flags); + root_item->flags = 0; + root_item->byte_limit = 0; + } +} diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index d01cc249a8d3..5b158da7e0bb 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -976,6 +976,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, record_root_in_trans(trans, root); btrfs_set_root_last_snapshot(&root->root_item, trans->transid); memcpy(new_root_item, &root->root_item, sizeof(*new_root_item)); + btrfs_check_and_init_root_item(new_root_item); root_flags = btrfs_root_flags(new_root_item); if (pending->readonly) From 43be21462d8c263e2449b52b23326232fd710bee Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 1 Apr 2011 14:55:00 +0000 Subject: [PATCH 102/135] Btrfs: fix free space cache when there are pinned extents and clusters V2 I noticed a huge problem with the free space cache that was presenting as an early ENOSPC. Turns out when writing the free space cache out I forgot to take into account pinned extents and more importantly clusters. This would result in us leaking free space everytime we unmounted the filesystem and remounted it. I fix this by making sure to check and see if the current block group has a cluster and writing out any entries that are in the cluster to the cache, as well as writing any pinned extents we currently have to the cache since those will be available for us to use the next time the fs mounts. This patch also adds a check to the end of load_free_space_cache to make sure we got the right amount of free space cache, and if not make sure to clear the cache and re-cache the old fashioned way. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 82 +++++++++++++++++++++++++++++++++++-- 1 file changed, 78 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 13575de85543..f561c953205b 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -24,6 +24,7 @@ #include "free-space-cache.h" #include "transaction.h" #include "disk-io.h" +#include "extent_io.h" #define BITS_PER_BITMAP (PAGE_CACHE_SIZE * 8) #define MAX_CACHE_BYTES_PER_GIG (32 * 1024) @@ -224,6 +225,7 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, u64 num_entries; u64 num_bitmaps; u64 generation; + u64 used = btrfs_block_group_used(&block_group->item); u32 cur_crc = ~(u32)0; pgoff_t index = 0; unsigned long first_page_offset; @@ -469,6 +471,17 @@ next: index++; } + spin_lock(&block_group->tree_lock); + if (block_group->free_space != (block_group->key.offset - used - + block_group->bytes_super)) { + spin_unlock(&block_group->tree_lock); + printk(KERN_ERR "block group %llu has an wrong amount of free " + "space\n", block_group->key.objectid); + ret = 0; + goto free_cache; + } + spin_unlock(&block_group->tree_lock); + ret = 1; out: kfree(checksums); @@ -497,8 +510,11 @@ int btrfs_write_out_cache(struct btrfs_root *root, struct list_head *pos, *n; struct page *page; struct extent_state *cached_state = NULL; + struct btrfs_free_cluster *cluster = NULL; + struct extent_io_tree *unpin = NULL; struct list_head bitmap_list; struct btrfs_key key; + u64 start, end, len; u64 bytes = 0; u32 *crc, *checksums; pgoff_t index = 0, last_index = 0; @@ -507,6 +523,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, int entries = 0; int bitmaps = 0; int ret = 0; + bool next_page = false; root = root->fs_info->tree_root; @@ -553,6 +570,18 @@ int btrfs_write_out_cache(struct btrfs_root *root, */ first_page_offset = (sizeof(u32) * num_checksums) + sizeof(u64); + /* Get the cluster for this block_group if it exists */ + if (!list_empty(&block_group->cluster_list)) + cluster = list_entry(block_group->cluster_list.next, + struct btrfs_free_cluster, + block_group_list); + + /* + * We shouldn't have switched the pinned extents yet so this is the + * right one + */ + unpin = root->fs_info->pinned_extents; + /* * Lock all pages first so we can lock the extent safely. * @@ -582,6 +611,12 @@ int btrfs_write_out_cache(struct btrfs_root *root, lock_extent_bits(&BTRFS_I(inode)->io_tree, 0, i_size_read(inode) - 1, 0, &cached_state, GFP_NOFS); + /* + * When searching for pinned extents, we need to start at our start + * offset. + */ + start = block_group->key.objectid; + /* Write out the extent entries */ do { struct btrfs_free_space_entry *entry; @@ -589,6 +624,8 @@ int btrfs_write_out_cache(struct btrfs_root *root, unsigned long offset = 0; unsigned long start_offset = 0; + next_page = false; + if (index == 0) { start_offset = first_page_offset; offset = start_offset; @@ -600,7 +637,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, entry = addr + start_offset; memset(addr, 0, PAGE_CACHE_SIZE); - while (1) { + while (node && !next_page) { struct btrfs_free_space *e; e = rb_entry(node, struct btrfs_free_space, offset_index); @@ -616,12 +653,49 @@ int btrfs_write_out_cache(struct btrfs_root *root, entry->type = BTRFS_FREE_SPACE_EXTENT; } node = rb_next(node); - if (!node) - break; + if (!node && cluster) { + node = rb_first(&cluster->root); + cluster = NULL; + } offset += sizeof(struct btrfs_free_space_entry); if (offset + sizeof(struct btrfs_free_space_entry) >= PAGE_CACHE_SIZE) + next_page = true; + entry++; + } + + /* + * We want to add any pinned extents to our free space cache + * so we don't leak the space + */ + while (!next_page && (start < block_group->key.objectid + + block_group->key.offset)) { + ret = find_first_extent_bit(unpin, start, &start, &end, + EXTENT_DIRTY); + if (ret) { + ret = 0; break; + } + + /* This pinned extent is out of our range */ + if (start >= block_group->key.objectid + + block_group->key.offset) + break; + + len = block_group->key.objectid + + block_group->key.offset - start; + len = min(len, end + 1 - start); + + entries++; + entry->offset = cpu_to_le64(start); + entry->bytes = cpu_to_le64(len); + entry->type = BTRFS_FREE_SPACE_EXTENT; + + start = end + 1; + offset += sizeof(struct btrfs_free_space_entry); + if (offset + sizeof(struct btrfs_free_space_entry) >= + PAGE_CACHE_SIZE) + next_page = true; entry++; } *crc = ~(u32)0; @@ -652,7 +726,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, page_cache_release(page); index++; - } while (node); + } while (node || next_page); /* Write out the bitmaps */ list_for_each_safe(pos, n, &bitmap_list) { From c9ddec74aa950a220cc4caa5215cfc5d886050b7 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 28 Mar 2011 13:43:25 +0000 Subject: [PATCH 103/135] Btrfs: don't warn in btrfs_add_orphan When I moved the orphan adding to btrfs_truncate I missed the fact that during orphan cleanup we just add the orphan items to the orphan list without going through btrfs_orphan_add, which results in lots of warnings on mount if you have any orphan items that need to be truncated. Just remove this warning since it's ok, this will allow all of the normal space accounting take place. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 57a03f6eb224..cc6022842e0c 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2220,8 +2220,6 @@ int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode) insert = 1; #endif insert = 1; - } else { - WARN_ON(!BTRFS_I(inode)->orphan_meta_reserved); } if (!BTRFS_I(inode)->orphan_meta_reserved) { From b987812b3fcaf70fdf0037589e5d2f5f2453e6ce Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 31 Mar 2011 07:27:20 +0000 Subject: [PATCH 104/135] powerpc/kexec: Fix mismatched ifdefs for PPC64/SMP. Commit b3df895aebe091b1657 "powerpc/kexec: Add support for FSL-BookE" introduced the original PPC_STD_MMU_64 checks around the function crash_kexec_wait_realmode(). Then commit c2be05481f61252 "powerpc: Fix default_machine_crash_shutdown #ifdef botch" changed the ifdef around the calling site to add a check on SMP, but the ifdef around the function itself was left unchanged, leaving an unused function for PPC_STD_MMU_64=y and SMP=n Rather than have two ifdefs that can get out of sync like this, simply put the corrected conditional around the function and use a stub to get rid of one set of ifdefs completely. Signed-off-by: Paul Gortmaker Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/crash.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 3d569e2aff18..3d3d416339dd 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -163,7 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu) } /* wait for all the CPUs to hit real mode but timeout if they don't come in */ -#ifdef CONFIG_PPC_STD_MMU_64 +#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP) static void crash_kexec_wait_realmode(int cpu) { unsigned int msecs; @@ -188,6 +188,8 @@ static void crash_kexec_wait_realmode(int cpu) } mb(); } +#else +static inline void crash_kexec_wait_realmode(int cpu) {} #endif /* @@ -344,9 +346,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs) crash_save_cpu(regs, crashing_cpu); crash_kexec_prepare_cpus(crashing_cpu); cpu_set(crashing_cpu, cpus_in_crash); -#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP) crash_kexec_wait_realmode(crashing_cpu); -#endif machine_kexec_mask_interrupts(); From f86d6b9b36a5d0923fa2abaacd425e328668fe16 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 31 Mar 2011 18:49:45 +0000 Subject: [PATCH 105/135] powerpc/pseries: Don't register global initcall Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index c319d04aa799..000724149089 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -378,7 +378,7 @@ static int __init pSeries_init_panel(void) return 0; } -arch_initcall(pSeries_init_panel); +machine_arch_initcall(pseries, pSeries_init_panel); static int pseries_set_dabr(unsigned long dabr) { From c1854e00727f50f7ac99e98d26ece04c087ef785 Mon Sep 17 00:00:00 2001 From: Ryan Grimm Date: Thu, 31 Mar 2011 19:33:02 +0000 Subject: [PATCH 106/135] powerpc: Set nr_cpu_ids early and use it to free PACAs Without this, "holes" in the CPU numbering can cause us to free too many PACAs Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/paca.c | 2 +- arch/powerpc/kernel/setup-common.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index f4adf89d7614..10f0aadee95b 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -203,7 +203,7 @@ void __init free_unused_pacas(void) { int new_size; - new_size = PAGE_ALIGN(sizeof(struct paca_struct) * num_possible_cpus()); + new_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids); if (new_size >= paca_size) return; diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 9d4882a46647..21f30cb68077 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -509,6 +509,9 @@ void __init smp_setup_cpu_maps(void) */ cpu_init_thread_core_maps(nthreads); + /* Now that possible cpus are set, set nr_cpu_ids for later use */ + nr_cpu_ids = find_last_bit(cpumask_bits(cpu_possible_mask),NR_CPUS) + 1; + free_unused_pacas(); } #endif /* CONFIG_SMP */ From c60e65d7863620945d498a8ac60181077879599c Mon Sep 17 00:00:00 2001 From: Matt Evans Date: Thu, 31 Mar 2011 19:33:08 +0000 Subject: [PATCH 107/135] powerpc/pseries: Fix build without CONFIG_HOTPLUG_CPU Signed-off-by: Matt Evans Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/smp.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index d6479f9738f0..a509c5292a67 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -112,10 +112,10 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) /* Fixup atomic count: it exited inside IRQ handler. */ task_thread_info(paca[lcpu].__current)->preempt_count = 0; - +#ifdef CONFIG_HOTPLUG_CPU if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE) goto out; - +#endif /* * If the RTAS start-cpu token does not exist then presume the * cpu is already spinning. @@ -130,7 +130,9 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) return 0; } +#ifdef CONFIG_HOTPLUG_CPU out: +#endif return 1; } @@ -144,16 +146,15 @@ static void __devinit smp_xics_setup_cpu(int cpu) vpa_init(cpu); cpumask_clear_cpu(cpu, of_spin_mask); +#ifdef CONFIG_HOTPLUG_CPU set_cpu_current_state(cpu, CPU_STATE_ONLINE); set_default_offline_state(cpu); - +#endif } #endif /* CONFIG_XICS */ static void __devinit smp_pSeries_kick_cpu(int nr) { - long rc; - unsigned long hcpuid; BUG_ON(nr < 0 || nr >= NR_CPUS); if (!smp_startup_cpu(nr)) @@ -165,16 +166,20 @@ static void __devinit smp_pSeries_kick_cpu(int nr) * the processor will continue on to secondary_start */ paca[nr].cpu_start = 1; - +#ifdef CONFIG_HOTPLUG_CPU set_preferred_offline_state(nr, CPU_STATE_ONLINE); if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) { + long rc; + unsigned long hcpuid; + hcpuid = get_hard_smp_processor_id(nr); rc = plpar_hcall_norets(H_PROD, hcpuid); if (rc != H_SUCCESS) printk(KERN_ERR "Error: Prod to wake up processor %d " "Ret= %ld\n", nr, rc); } +#endif } static int smp_pSeries_cpu_bootable(unsigned int nr) From 0de009c900e7ebd21097797f723a40813e953879 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 5 Apr 2011 16:04:39 +0100 Subject: [PATCH 108/135] drm/i915/crt: Remove 0xa0 probe for VGA This is a moral revert of 6ec3d0c0e9c0c605696e91048eebaca7b0c36695. Following the fix to reset the GMBUS controller after a NAK, we finally utilize the 0xa0 probe for a CRT connection. And discover that the code is broken. Shock. There are a number of issues, but following a key insight from Dave Airlie, that 0xA0 is an invalid address on a 7-bit bus (though not if we were to enable 10-bit addressing), and would look like the EDID port 0x50, it is possible to see where the confusion starts. In short, a write to 0xA0 is accepted by the GMBUS controller which we interpreted as meaning the existence of a connection (a slave on the other end of the wire ACKing the write). That was false. During testing with a broken GMBUS implementation, which never reset an earlier NAK, this test always reported a NAK and so we proceeded on to the next test. Reported-and-tested-by: Sitsofe Wheeler Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35904 Reported-and-tested-by: Riccardo Magliocchetti Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=32612 Signed-off-by: Chris Wilson Acked-by: Dave Airlie Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_crt.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 8342259f3160..d03fc05b39c0 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -269,21 +269,6 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) return ret; } -static bool intel_crt_ddc_probe(struct drm_i915_private *dev_priv, int ddc_bus) -{ - u8 buf; - struct i2c_msg msgs[] = { - { - .addr = 0xA0, - .flags = 0, - .len = 1, - .buf = &buf, - }, - }; - /* DDC monitor detect: Does it ACK a write to 0xA0? */ - return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1; -} - static bool intel_crt_detect_ddc(struct drm_connector *connector) { struct intel_crt *crt = intel_attached_crt(connector); @@ -293,11 +278,6 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) if (crt->base.type != INTEL_OUTPUT_ANALOG) return false; - if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) { - DRM_DEBUG_KMS("CRT detected via DDC:0xa0\n"); - return true; - } - if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) { struct edid *edid; bool is_digital = false; From a6737ad15b4acf88bbf7753e929faf215adeaa3a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 5 Apr 2011 16:04:40 +0100 Subject: [PATCH 109/135] drm/i915/lvds: Remove 0xa0 DDC probe for LVDS This is a revert of 428d2e828c0a68206e5158a42451487601dc9194. This is broken in the same manner as for VGA: trying to write to an invalid address on the (currently 7-bit) i2c bus. One notable failure appears to be for MacBooks. The scary part was that it gave the appearance of working (i.e. reporting the absence of the panel) on various all-in-one machines with ghost LVDS panels and not failing for laptops. Signed-off-by: Chris Wilson Acked-by: Dave Airlie Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_lvds.c | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 86cd30bcb619..a562bd2648c7 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -829,25 +829,6 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev, return false; } -static bool intel_lvds_ddc_probe(struct drm_device *dev, u8 pin) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - u8 buf = 0; - struct i2c_msg msgs[] = { - { - .addr = 0xA0, - .flags = 0, - .len = 1, - .buf = &buf, - }, - }; - struct i2c_adapter *i2c = &dev_priv->gmbus[pin].adapter; - /* XXX this only appears to work when using GMBUS */ - if (intel_gmbus_is_forced_bit(i2c)) - return true; - return i2c_transfer(i2c, msgs, 1) == 1; -} - /** * intel_lvds_init - setup LVDS connectors on this device * @dev: drm device @@ -888,11 +869,6 @@ bool intel_lvds_init(struct drm_device *dev) } } - if (!intel_lvds_ddc_probe(dev, pin)) { - DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n"); - return false; - } - intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL); if (!intel_lvds) { return false; From 8182924bc5850281985d73c312876746acd390b5 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 30 Mar 2011 09:51:33 +0200 Subject: [PATCH 110/135] block: dump request state on seeing a corrupted request completion Currently we just dump a non-informative 'request botched' message. Lets actually try and print something sane to help debug issues around this. Signed-off-by: Jens Axboe --- block/blk-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-core.c b/block/blk-core.c index e0a062363937..4fdf8953efbf 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2163,7 +2163,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes) * size, something has gone terribly wrong. */ if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) { - printk(KERN_ERR "blk: request botched\n"); + blk_dump_rq_flags(req, "request botched"); req->__data_len = blk_rq_cur_bytes(req); } From b710a480554f2be682bac3cb59b0e085ba3d644b Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 30 Mar 2011 09:52:30 +0200 Subject: [PATCH 111/135] block: get rid of elv_insert() interface Merge it with __elv_add_request(), it's pretty pointless to have a function with only two callers. The main interface is elv_add_request()/__elv_add_request(). Signed-off-by: Jens Axboe --- block/blk-flush.c | 4 ++-- block/elevator.c | 35 +++++++++++++++-------------------- include/linux/elevator.h | 1 - 3 files changed, 17 insertions(+), 23 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index 93d5fd8e51eb..d6275cbbaf35 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -261,7 +261,7 @@ static bool blk_kick_flush(struct request_queue *q) q->flush_rq.end_io = flush_end_io; q->flush_pending_idx ^= 1; - elv_insert(q, &q->flush_rq, ELEVATOR_INSERT_REQUEUE); + __elv_add_request(q, &q->flush_rq, ELEVATOR_INSERT_REQUEUE); return true; } @@ -281,7 +281,7 @@ static void flush_data_end_io(struct request *rq, int error) * blk_insert_flush - insert a new FLUSH/FUA request * @rq: request to insert * - * To be called from elv_insert() for %ELEVATOR_INSERT_FLUSH insertions. + * To be called from __elv_add_request() for %ELEVATOR_INSERT_FLUSH insertions. * @rq is being submitted. Analyze what needs to be done and put it on the * right queue. * diff --git a/block/elevator.c b/block/elevator.c index c387d3168734..0cdb4e7ebab4 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -610,7 +610,7 @@ void elv_requeue_request(struct request_queue *q, struct request *rq) rq->cmd_flags &= ~REQ_STARTED; - elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE); + __elv_add_request(q, rq, ELEVATOR_INSERT_REQUEUE); } void elv_drain_elevator(struct request_queue *q) @@ -655,12 +655,25 @@ void elv_quiesce_end(struct request_queue *q) queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q); } -void elv_insert(struct request_queue *q, struct request *rq, int where) +void __elv_add_request(struct request_queue *q, struct request *rq, int where) { trace_block_rq_insert(q, rq); rq->q = q; + BUG_ON(rq->cmd_flags & REQ_ON_PLUG); + + if (rq->cmd_flags & REQ_SOFTBARRIER) { + /* barriers are scheduling boundary, update end_sector */ + if (rq->cmd_type == REQ_TYPE_FS || + (rq->cmd_flags & REQ_DISCARD)) { + q->end_sector = rq_end_sector(rq); + q->boundary_rq = rq; + } + } else if (!(rq->cmd_flags & REQ_ELVPRIV) && + where == ELEVATOR_INSERT_SORT) + where = ELEVATOR_INSERT_BACK; + switch (where) { case ELEVATOR_INSERT_REQUEUE: case ELEVATOR_INSERT_FRONT: @@ -722,24 +735,6 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) BUG(); } } - -void __elv_add_request(struct request_queue *q, struct request *rq, int where) -{ - BUG_ON(rq->cmd_flags & REQ_ON_PLUG); - - if (rq->cmd_flags & REQ_SOFTBARRIER) { - /* barriers are scheduling boundary, update end_sector */ - if (rq->cmd_type == REQ_TYPE_FS || - (rq->cmd_flags & REQ_DISCARD)) { - q->end_sector = rq_end_sector(rq); - q->boundary_rq = rq; - } - } else if (!(rq->cmd_flags & REQ_ELVPRIV) && - where == ELEVATOR_INSERT_SORT) - where = ELEVATOR_INSERT_BACK; - - elv_insert(q, rq, where); -} EXPORT_SYMBOL(__elv_add_request); void elv_add_request(struct request_queue *q, struct request *rq, int where) diff --git a/include/linux/elevator.h b/include/linux/elevator.h index d93efcc44570..21a8ebf2dc3a 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -101,7 +101,6 @@ extern void elv_dispatch_sort(struct request_queue *, struct request *); extern void elv_dispatch_add_tail(struct request_queue *, struct request *); extern void elv_add_request(struct request_queue *, struct request *, int); extern void __elv_add_request(struct request_queue *, struct request *, int); -extern void elv_insert(struct request_queue *, struct request *, int); extern int elv_merge(struct request_queue *, struct request **, struct bio *); extern int elv_try_merge(struct request *, struct bio *); extern void elv_merge_requests(struct request_queue *, struct request *, From 53d63e6b0dfb95882ec0219ba6bbd50cde423794 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 30 Mar 2011 13:27:09 +0200 Subject: [PATCH 112/135] block: make the flush insertion use the tail of the dispatch list It's not a preempt type request, in fact we have to insert it behind requests that do specify INSERT_FRONT. Signed-off-by: Jens Axboe --- block/blk-flush.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index d6275cbbaf35..eba4a2790c6c 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -261,7 +261,7 @@ static bool blk_kick_flush(struct request_queue *q) q->flush_rq.end_io = flush_end_io; q->flush_pending_idx ^= 1; - __elv_add_request(q, &q->flush_rq, ELEVATOR_INSERT_REQUEUE); + list_add_tail(&q->flush_rq.queuelist, &q->queue_head); return true; } @@ -312,7 +312,7 @@ void blk_insert_flush(struct request *rq) */ if ((policy & REQ_FSEQ_DATA) && !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) { - list_add(&rq->queuelist, &q->queue_head); + list_add_tail(&rq->queuelist, &q->queue_head); return; } From ee3dea3549444e6e76d27af48b4929983e6f023c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 30 Mar 2011 12:17:43 +0200 Subject: [PATCH 113/135] ufs: remove unessecary blk_flush_plug We already flush the per-process plugging list when context switching, so a blk_flush_plug call just before a yield() is not needed. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- fs/ufs/truncate.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c index 11014302c9ca..5f821dbc0579 100644 --- a/fs/ufs/truncate.c +++ b/fs/ufs/truncate.c @@ -479,7 +479,6 @@ int ufs_truncate(struct inode *inode, loff_t old_i_size) break; if (IS_SYNC(inode) && (inode->i_state & I_DIRTY)) ufs_sync_inode (inode); - blk_flush_plug(current); yield(); } From 6f0379377047b18103b88ce33c03e5b19747ae57 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Wed, 30 Mar 2011 12:21:56 +0200 Subject: [PATCH 114/135] blk-throttle: don't call xchg on bool xchg does not work portably with smaller than 32bit types. Signed-off-by: Andreas Schwab Signed-off-by: Jens Axboe --- block/blk-throttle.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 5352bdafbcf0..6c98cfeeedf0 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -77,7 +77,7 @@ struct throtl_grp { unsigned long slice_end[2]; /* Some throttle limits got updated for the group */ - bool limits_changed; + int limits_changed; }; struct throtl_data @@ -102,7 +102,7 @@ struct throtl_data /* Work for dispatching throttled bios */ struct delayed_work throtl_work; - bool limits_changed; + int limits_changed; }; enum tg_state_flags { From 929e27252e8ca69363f81f26af5eaba62cb4c572 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 30 Mar 2011 12:22:23 +0200 Subject: [PATCH 115/135] ide: ide_requeue_and_plug() reinstate "always plug" behaviour We see stalls if we don't always ensure that the queue gets run again. Even if rq == NULL, we could have other pending requests in the queue. Signed-off-by: Jens Axboe --- drivers/ide/ide-io.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 0e406d73b2c8..ca27d3090aeb 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -570,8 +570,7 @@ void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq) spin_unlock_irqrestore(q->queue_lock, flags); /* Use 3ms as that was the old plug delay */ - if (rq) - blk_delay_queue(q, 3); + blk_delay_queue(q, 3); } static int drive_is_ready(ide_drive_t *drive) From 7dcda1c96d7c643101d4a05579ef4512a4baa7ef Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 5 Apr 2011 23:51:48 +0200 Subject: [PATCH 116/135] fs: export empty_aops With the ->sync_page() hook gone, we have a few users that add their own static address_space_operations without any functions defined. fs/inode.c already has an empty_aops that it uses for init purposes. Lets export that and use it in the places where an otherwise empty aops was defined. Signed-off-by: Jens Axboe --- fs/inode.c | 9 ++++++++- fs/nilfs2/page.c | 2 -- fs/ubifs/xattr.c | 4 ++-- include/linux/fs.h | 2 ++ 4 files changed, 12 insertions(+), 5 deletions(-) diff --git a/fs/inode.c b/fs/inode.c index 5f4e11aaeb5c..33c963d08ab4 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -124,6 +124,14 @@ __cacheline_aligned_in_smp DEFINE_SPINLOCK(inode_wb_list_lock); */ static DECLARE_RWSEM(iprune_sem); +/* + * Empty aops. Can be used for the cases where the user does not + * define any of the address_space operations. + */ +const struct address_space_operations empty_aops = { +}; +EXPORT_SYMBOL(empty_aops); + /* * Statistics gathering.. */ @@ -176,7 +184,6 @@ int proc_nr_inodes(ctl_table *table, int write, */ int inode_init_always(struct super_block *sb, struct inode *inode) { - static const struct address_space_operations empty_aops; static const struct inode_operations empty_iops; static const struct file_operations empty_fops; struct address_space *const mapping = &inode->i_data; diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c index 9d2dc6b4348e..1168059c7efd 100644 --- a/fs/nilfs2/page.c +++ b/fs/nilfs2/page.c @@ -495,8 +495,6 @@ unsigned nilfs_page_count_clean_buffers(struct page *page, void nilfs_mapping_init(struct address_space *mapping, struct backing_dev_info *bdi) { - static const struct address_space_operations empty_aops; - mapping->host = NULL; mapping->flags = 0; mapping_set_gfp_mask(mapping, GFP_NOFS); diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c index c74400f88fe0..3299f469e712 100644 --- a/fs/ubifs/xattr.c +++ b/fs/ubifs/xattr.c @@ -56,6 +56,7 @@ */ #include "ubifs.h" +#include #include #include #include @@ -80,7 +81,6 @@ enum { }; static const struct inode_operations none_inode_operations; -static const struct address_space_operations none_address_operations; static const struct file_operations none_file_operations; /** @@ -130,7 +130,7 @@ static int create_xattr(struct ubifs_info *c, struct inode *host, } /* Re-define all operations to be "nothing" */ - inode->i_mapping->a_ops = &none_address_operations; + inode->i_mapping->a_ops = &empty_aops; inode->i_op = &none_inode_operations; inode->i_fop = &none_file_operations; diff --git a/include/linux/fs.h b/include/linux/fs.h index 52f283c1edb2..1b95af37e3b3 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -613,6 +613,8 @@ struct address_space_operations { int (*error_remove_page)(struct address_space *, struct page *); }; +extern const struct address_space_operations empty_aops; + /* * pagecache_write_begin/pagecache_write_end must be used by general code * to write into the pagecache. From a63a5cf84dac7a23a57c800eea5734701e7d3c04 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 1 Apr 2011 21:02:31 +0200 Subject: [PATCH 117/135] dm: improve block integrity support The current block integrity (DIF/DIX) support in DM is verifying that all devices' integrity profiles match during DM device resume (which is past the point of no return). To some degree that is unavoidable (stacked DM devices force this late checking). But for most DM devices (which aren't stacking on other DM devices) the ideal time to verify all integrity profiles match is during table load. Introduce the notion of an "initialized" integrity profile: a profile that was blk_integrity_register()'d with a non-NULL 'blk_integrity' template. Add blk_integrity_is_initialized() to allow checking if a profile was initialized. Update DM integrity support to: - check all devices with _initialized_ integrity profiles match during table load; uninitialized profiles (e.g. for underlying DM device(s) of a stacked DM device) are ignored. - disallow a table load that would result in an integrity profile that conflicts with a DM device's existing (in-use) integrity profile - avoid clearing an existing integrity profile - validate all integrity profiles match during resume; but if they don't all we can do is report the mismatch (during resume we're past the point of no return) Signed-off-by: Mike Snitzer Cc: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-integrity.c | 12 ++++- drivers/md/dm-table.c | 114 +++++++++++++++++++++++++++++------------ include/linux/blkdev.h | 2 + 3 files changed, 93 insertions(+), 35 deletions(-) diff --git a/block/blk-integrity.c b/block/blk-integrity.c index 54bcba6c02a7..129b9e209a3b 100644 --- a/block/blk-integrity.c +++ b/block/blk-integrity.c @@ -30,6 +30,8 @@ static struct kmem_cache *integrity_cachep; +static const char *bi_unsupported_name = "unsupported"; + /** * blk_rq_count_integrity_sg - Count number of integrity scatterlist elements * @q: request queue @@ -358,6 +360,14 @@ static struct kobj_type integrity_ktype = { .release = blk_integrity_release, }; +bool blk_integrity_is_initialized(struct gendisk *disk) +{ + struct blk_integrity *bi = blk_get_integrity(disk); + + return (bi && bi->name && strcmp(bi->name, bi_unsupported_name) != 0); +} +EXPORT_SYMBOL(blk_integrity_is_initialized); + /** * blk_integrity_register - Register a gendisk as being integrity-capable * @disk: struct gendisk pointer to make integrity-aware @@ -407,7 +417,7 @@ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template) bi->get_tag_fn = template->get_tag_fn; bi->tag_size = template->tag_size; } else - bi->name = "unsupported"; + bi->name = bi_unsupported_name; return 0; } diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 416d4e258df6..cb8380c9767f 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -926,21 +926,81 @@ static int dm_table_build_index(struct dm_table *t) return r; } +/* + * Get a disk whose integrity profile reflects the table's profile. + * If %match_all is true, all devices' profiles must match. + * If %match_all is false, all devices must at least have an + * allocated integrity profile; but uninitialized is ok. + * Returns NULL if integrity support was inconsistent or unavailable. + */ +static struct gendisk * dm_table_get_integrity_disk(struct dm_table *t, + bool match_all) +{ + struct list_head *devices = dm_table_get_devices(t); + struct dm_dev_internal *dd = NULL; + struct gendisk *prev_disk = NULL, *template_disk = NULL; + + list_for_each_entry(dd, devices, list) { + template_disk = dd->dm_dev.bdev->bd_disk; + if (!blk_get_integrity(template_disk)) + goto no_integrity; + if (!match_all && !blk_integrity_is_initialized(template_disk)) + continue; /* skip uninitialized profiles */ + else if (prev_disk && + blk_integrity_compare(prev_disk, template_disk) < 0) + goto no_integrity; + prev_disk = template_disk; + } + + return template_disk; + +no_integrity: + if (prev_disk) + DMWARN("%s: integrity not set: %s and %s profile mismatch", + dm_device_name(t->md), + prev_disk->disk_name, + template_disk->disk_name); + return NULL; +} + /* * Register the mapped device for blk_integrity support if - * the underlying devices support it. + * the underlying devices have an integrity profile. But all devices + * may not have matching profiles (checking all devices isn't reliable + * during table load because this table may use other DM device(s) which + * must be resumed before they will have an initialized integity profile). + * Stacked DM devices force a 2 stage integrity profile validation: + * 1 - during load, validate all initialized integrity profiles match + * 2 - during resume, validate all integrity profiles match */ static int dm_table_prealloc_integrity(struct dm_table *t, struct mapped_device *md) { - struct list_head *devices = dm_table_get_devices(t); - struct dm_dev_internal *dd; + struct gendisk *template_disk = NULL; - list_for_each_entry(dd, devices, list) - if (bdev_get_integrity(dd->dm_dev.bdev)) { - t->integrity_supported = 1; - return blk_integrity_register(dm_disk(md), NULL); - } + template_disk = dm_table_get_integrity_disk(t, false); + if (!template_disk) + return 0; + if (!blk_integrity_is_initialized(dm_disk(md))) { + t->integrity_supported = 1; + return blk_integrity_register(dm_disk(md), NULL); + } + + /* + * If DM device already has an initalized integrity + * profile the new profile should not conflict. + */ + if (blk_integrity_is_initialized(template_disk) && + blk_integrity_compare(dm_disk(md), template_disk) < 0) { + DMWARN("%s: conflict with existing integrity profile: " + "%s profile mismatch", + dm_device_name(t->md), + template_disk->disk_name); + return 1; + } + + /* Preserve existing initialized integrity profile */ + t->integrity_supported = 1; return 0; } @@ -1094,41 +1154,27 @@ combine_limits: /* * Set the integrity profile for this device if all devices used have - * matching profiles. + * matching profiles. We're quite deep in the resume path but still + * don't know if all devices (particularly DM devices this device + * may be stacked on) have matching profiles. Even if the profiles + * don't match we have no way to fail (to resume) at this point. */ static void dm_table_set_integrity(struct dm_table *t) { - struct list_head *devices = dm_table_get_devices(t); - struct dm_dev_internal *prev = NULL, *dd = NULL; + struct gendisk *template_disk = NULL; if (!blk_get_integrity(dm_disk(t->md))) return; - list_for_each_entry(dd, devices, list) { - if (prev && - blk_integrity_compare(prev->dm_dev.bdev->bd_disk, - dd->dm_dev.bdev->bd_disk) < 0) { - DMWARN("%s: integrity not set: %s and %s mismatch", - dm_device_name(t->md), - prev->dm_dev.bdev->bd_disk->disk_name, - dd->dm_dev.bdev->bd_disk->disk_name); - goto no_integrity; - } - prev = dd; + template_disk = dm_table_get_integrity_disk(t, true); + if (!template_disk && + blk_integrity_is_initialized(dm_disk(t->md))) { + DMWARN("%s: device no longer has a valid integrity profile", + dm_device_name(t->md)); + return; } - - if (!prev || !bdev_get_integrity(prev->dm_dev.bdev)) - goto no_integrity; - blk_integrity_register(dm_disk(t->md), - bdev_get_integrity(prev->dm_dev.bdev)); - - return; - -no_integrity: - blk_integrity_register(dm_disk(t->md), NULL); - - return; + blk_get_integrity(template_disk)); } void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 16a902f099ac..32176cc8e715 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1206,6 +1206,7 @@ struct blk_integrity { struct kobject kobj; }; +extern bool blk_integrity_is_initialized(struct gendisk *); extern int blk_integrity_register(struct gendisk *, struct blk_integrity *); extern void blk_integrity_unregister(struct gendisk *); extern int blk_integrity_compare(struct gendisk *, struct gendisk *); @@ -1262,6 +1263,7 @@ queue_max_integrity_segments(struct request_queue *q) #define queue_max_integrity_segments(a) (0) #define blk_integrity_merge_rq(a, b, c) (0) #define blk_integrity_merge_bio(a, b, c) (0) +#define blk_integrity_is_initialized(a) (0) #endif /* CONFIG_BLK_DEV_INTEGRITY */ From f83e826181f7f8fb152e4190d03854fc3a5dd040 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Mon, 4 Apr 2011 00:15:02 +0200 Subject: [PATCH 118/135] block: fix request sorting at unplug Comparison function for list_sort() must be anticommutative, otherwise it is not sorting in ordinary meaning. But fortunately list_sort() always check ((*cmp)(priv, a, b) <= 0) it not distinguish negative and zero, so comparison function can implement only less-or-equal instead of full three-way comparison. Signed-off-by: Konstantin Khlebnikov Signed-off-by: Jens Axboe --- block/blk-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-core.c b/block/blk-core.c index 4fdf8953efbf..725091d5496d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2665,7 +2665,7 @@ static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b) struct request *rqa = container_of(a, struct request, queuelist); struct request *rqb = container_of(b, struct request, queuelist); - return !(rqa->q == rqb->q); + return !(rqa->q <= rqb->q); } static void flush_plug_list(struct blk_plug *plug) From 782b86e2656762382ae1c2686d8d5c91f7d5eacf Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 5 Apr 2011 03:29:57 +0200 Subject: [PATCH 119/135] ide: always ensure that blk_delay_queue() is called if we have pending IO Just because we are not requeuing a request does not mean that some aren't pending. So always issue a blk_delay_queue() if either we are requeueing OR there's pending IO. This fixes a boot problem for some IDE boxes. Signed-off-by: Jens Axboe --- drivers/ide/ide-io.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index ca27d3090aeb..177db6d5b2f5 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -430,6 +430,26 @@ static inline void ide_unlock_host(struct ide_host *host) } } +static void __ide_requeue_and_plug(struct request_queue *q, struct request *rq) +{ + if (rq) + blk_requeue_request(q, rq); + if (rq || blk_peek_request(q)) { + /* Use 3ms as that was the old plug delay */ + blk_delay_queue(q, 3); + } +} + +void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq) +{ + struct request_queue *q = drive->queue; + unsigned long flags; + + spin_lock_irqsave(q->queue_lock, flags); + __ide_requeue_and_plug(q, rq); + spin_unlock_irqrestore(q->queue_lock, flags); +} + /* * Issue a new request to a device. */ @@ -550,27 +570,7 @@ plug_device: ide_unlock_host(host); plug_device_2: spin_lock_irq(q->queue_lock); - - if (rq) { - blk_requeue_request(q, rq); - blk_delay_queue(q, queue_run_ms); - } -} - -void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq) -{ - struct request_queue *q = drive->queue; - unsigned long flags; - - spin_lock_irqsave(q->queue_lock, flags); - - if (rq) - blk_requeue_request(q, rq); - - spin_unlock_irqrestore(q->queue_lock, flags); - - /* Use 3ms as that was the old plug delay */ - blk_delay_queue(q, 3); + __ide_requeue_and_plug(q, rq); } static int drive_is_ready(ide_drive_t *drive) From d0de4dc584ec6aa3b26fffea320a8457827768fc Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 5 Apr 2011 17:20:50 -0400 Subject: [PATCH 120/135] inotify: fix double free/corruption of stuct user On an error path in inotify_init1 a normal user can trigger a double free of struct user. This is a regression introduced by a2ae4cc9a16e ("inotify: stop kernel memory leak on file creation failure"). We fix this by making sure that if a group exists the user reference is dropped when the group is cleaned up. We should not explictly drop the reference on error and also drop the reference when the group is cleaned up. The new lifetime rules are that an inotify group lives from inotify_new_group to the last fsnotify_put_group. Since the struct user and inotify_devs are directly tied to this lifetime they are only changed/updated in those two locations. We get rid of all special casing of struct user or user->inotify_devs. Signed-off-by: Eric Paris Cc: stable@kernel.org (2.6.37 and up) Signed-off-by: Linus Torvalds --- fs/notify/inotify/inotify_fsnotify.c | 1 + fs/notify/inotify/inotify_user.c | 39 ++++++++++------------------ 2 files changed, 14 insertions(+), 26 deletions(-) diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c index a91b69a6a291..0348d0c8f65e 100644 --- a/fs/notify/inotify/inotify_fsnotify.c +++ b/fs/notify/inotify/inotify_fsnotify.c @@ -198,6 +198,7 @@ static void inotify_free_group_priv(struct fsnotify_group *group) idr_for_each(&group->inotify_data.idr, idr_callback, group); idr_remove_all(&group->inotify_data.idr); idr_destroy(&group->inotify_data.idr); + atomic_dec(&group->inotify_data.user->inotify_devs); free_uid(group->inotify_data.user); } diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index bd46e7c8a0ef..8445fbc8985c 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -290,7 +290,6 @@ static int inotify_fasync(int fd, struct file *file, int on) static int inotify_release(struct inode *ignored, struct file *file) { struct fsnotify_group *group = file->private_data; - struct user_struct *user = group->inotify_data.user; pr_debug("%s: group=%p\n", __func__, group); @@ -299,8 +298,6 @@ static int inotify_release(struct inode *ignored, struct file *file) /* free this group, matching get was inotify_init->fsnotify_obtain_group */ fsnotify_put_group(group); - atomic_dec(&user->inotify_devs); - return 0; } @@ -697,7 +694,7 @@ retry: return ret; } -static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsigned int max_events) +static struct fsnotify_group *inotify_new_group(unsigned int max_events) { struct fsnotify_group *group; @@ -710,8 +707,14 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign spin_lock_init(&group->inotify_data.idr_lock); idr_init(&group->inotify_data.idr); group->inotify_data.last_wd = 0; - group->inotify_data.user = user; group->inotify_data.fa = NULL; + group->inotify_data.user = get_current_user(); + + if (atomic_inc_return(&group->inotify_data.user->inotify_devs) > + inotify_max_user_instances) { + fsnotify_put_group(group); + return ERR_PTR(-EMFILE); + } return group; } @@ -721,7 +724,6 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign SYSCALL_DEFINE1(inotify_init1, int, flags) { struct fsnotify_group *group; - struct user_struct *user; int ret; /* Check the IN_* constants for consistency. */ @@ -731,31 +733,16 @@ SYSCALL_DEFINE1(inotify_init1, int, flags) if (flags & ~(IN_CLOEXEC | IN_NONBLOCK)) return -EINVAL; - user = get_current_user(); - if (unlikely(atomic_read(&user->inotify_devs) >= - inotify_max_user_instances)) { - ret = -EMFILE; - goto out_free_uid; - } - /* fsnotify_obtain_group took a reference to group, we put this when we kill the file in the end */ - group = inotify_new_group(user, inotify_max_queued_events); - if (IS_ERR(group)) { - ret = PTR_ERR(group); - goto out_free_uid; - } - - atomic_inc(&user->inotify_devs); + group = inotify_new_group(inotify_max_queued_events); + if (IS_ERR(group)) + return PTR_ERR(group); ret = anon_inode_getfd("inotify", &inotify_fops, group, O_RDONLY | flags); - if (ret >= 0) - return ret; + if (ret < 0) + fsnotify_put_group(group); - fsnotify_put_group(group); - atomic_dec(&user->inotify_devs); -out_free_uid: - free_uid(user); return ret; } From 6221f222c0ebf1acdf7abcf927178f40e1a65e2a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 5 Apr 2011 18:30:43 -0700 Subject: [PATCH 121/135] Linux 2.6.39-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ba7a55ccd890..8392b64079df 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 39 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Flesh-Eating Bats with Fangs # *DOCUMENTATION* From 3fe14ab541cd9b0d1f243afb7556046f12c8743c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:47 +0200 Subject: [PATCH 122/135] x86-32, numa: Fix failure condition check in alloc_remap() node_remap_{start|end}_vaddr[] describe [start, end) ranges; however, alloc_remap() incorrectly failed when the current allocation + size equaled the end but it should fail only when it goes over. Fix it. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-2-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index bde3906420df..84aac47c3887 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -200,7 +200,7 @@ void *alloc_remap(int nid, unsigned long size) size = ALIGN(size, L1_CACHE_BYTES); - if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid]) + if (!allocation || (allocation + size) > node_remap_end_vaddr[nid]) return NULL; node_remap_alloc_vaddr[nid] += size; From a6c24f7a705d939ddd2fcaa443fa3d8e852b933d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:48 +0200 Subject: [PATCH 123/135] x86-32, numa: Align pgdat size while initializing alloc_remap When pgdat is reserved in init_remap_allocator(), PAGE_SIZE aligned size will be used. Match the size alignment in initialization to avoid allocation failure down the road. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-3-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 84aac47c3887..50e82507eab4 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -287,7 +287,8 @@ static __init unsigned long calculate_numa_remap_pages(void) node_end_pfn[nid] = max_pfn; /* ensure the remap includes space for the pgdat. */ - size = node_remap_size[nid] + sizeof(pg_data_t); + size = node_remap_size[nid]; + size += ALIGN(sizeof(pg_data_t), PAGE_SIZE); /* convert size to large (pmd size) pages, rounding up */ size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES; From 5b8443b25c0f323ec190d094e4b441957b02664e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:49 +0200 Subject: [PATCH 124/135] x86-32, numa: Remove redundant top-down alloc code from remap initialization memblock_find_in_range() now does top-down allocation by default, so there's no reason for its callers to explicitly implement it by gradually lowering the start address. Remove redundant top-down allocation logic from init_meminit() and calculate_numa_remap_pages(). Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-4-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 43 ++++++++++++++----------------------------- 1 file changed, 14 insertions(+), 29 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 50e82507eab4..60701a5e0de0 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -270,8 +270,7 @@ static __init unsigned long calculate_numa_remap_pages(void) unsigned long size, reserve_pages = 0; for_each_online_node(nid) { - u64 node_kva_target; - u64 node_kva_final; + u64 node_kva; /* * The acpi/srat node info can show hot-add memroy zones @@ -295,19 +294,11 @@ static __init unsigned long calculate_numa_remap_pages(void) /* now the roundup is correct, convert to PAGE_SIZE pages */ size = size * PTRS_PER_PTE; - node_kva_target = round_down(node_end_pfn[nid] - size, - PTRS_PER_PTE); - node_kva_target <<= PAGE_SHIFT; - do { - node_kva_final = memblock_find_in_range(node_kva_target, + node_kva = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT, ((u64)node_end_pfn[nid])<>PAGE_SHIFT) > (node_start_pfn[nid])); - - if (node_kva_final == MEMBLOCK_ERROR) + ((u64)size)<>PAGE_SHIFT); + size, nid, node_kva >> PAGE_SHIFT); /* * prevent kva address below max_low_pfn want it on system @@ -328,11 +319,11 @@ static __init unsigned long calculate_numa_remap_pages(void) * to use it as free. * So memblock_x86_reserve_range here, hope we don't run out of that array */ - memblock_x86_reserve_range(node_kva_final, - node_kva_final+(((u64)size)<>PAGE_SHIFT; + node_remap_start_pfn[nid] = node_kva >> PAGE_SHIFT; } printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n", reserve_pages); @@ -356,7 +347,6 @@ static void init_remap_allocator(int nid) void __init initmem_init(void) { int nid; - long kva_target_pfn; /* * When mapping a NUMA machine we allocate the node_mem_map arrays @@ -371,15 +361,10 @@ void __init initmem_init(void) kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE); - kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE); - do { - kva_start_pfn = memblock_find_in_range(kva_target_pfn<> PAGE_SHIFT; - kva_target_pfn -= PTRS_PER_PTE; - } while (kva_start_pfn == MEMBLOCK_ERROR && kva_target_pfn > min_low_pfn); - + kva_start_pfn = memblock_find_in_range(min_low_pfn << PAGE_SHIFT, + max_low_pfn << PAGE_SHIFT, + kva_pages << PAGE_SHIFT, + PTRS_PER_PTE << PAGE_SHIFT) >> PAGE_SHIFT; if (kva_start_pfn == MEMBLOCK_ERROR) panic("Can not get kva space\n"); From 5510db9c1be111528ce46c57f0bec1c9dce258f4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:50 +0200 Subject: [PATCH 125/135] x86-32, numa: Reorganize calculate_numa_remap_page() Separate the outer node walking loop and per-node logic from calculate_numa_remap_pages(). The outer loop is collapsed into initmem_init() and the per-node logic is moved into a new function - init_alloc_remap(). The new function name is confusing with the existing init_remap_allocator() and the behavior is the function isn't very clean either at this point, but this is to prepare for further cleanups and it will become prettier. This function doesn't introduce any behavior change. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-5-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 111 +++++++++++++++++++++--------------------- 1 file changed, 55 insertions(+), 56 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 60701a5e0de0..5039e9b21d9e 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -264,70 +264,64 @@ void resume_map_numa_kva(pgd_t *pgd_base) } #endif -static __init unsigned long calculate_numa_remap_pages(void) +static __init unsigned long init_alloc_remap(int nid, unsigned long offset) { - int nid; - unsigned long size, reserve_pages = 0; + unsigned long size; + u64 node_kva; - for_each_online_node(nid) { - u64 node_kva; + /* + * The acpi/srat node info can show hot-add memroy zones where + * memory could be added but not currently present. + */ + printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n", + nid, node_start_pfn[nid], node_end_pfn[nid]); + if (node_start_pfn[nid] > max_pfn) + return 0; + if (!node_end_pfn[nid]) + return 0; + if (node_end_pfn[nid] > max_pfn) + node_end_pfn[nid] = max_pfn; - /* - * The acpi/srat node info can show hot-add memroy zones - * where memory could be added but not currently present. - */ - printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n", - nid, node_start_pfn[nid], node_end_pfn[nid]); - if (node_start_pfn[nid] > max_pfn) - continue; - if (!node_end_pfn[nid]) - continue; - if (node_end_pfn[nid] > max_pfn) - node_end_pfn[nid] = max_pfn; + /* ensure the remap includes space for the pgdat. */ + size = node_remap_size[nid]; + size += ALIGN(sizeof(pg_data_t), PAGE_SIZE); - /* ensure the remap includes space for the pgdat. */ - size = node_remap_size[nid]; - size += ALIGN(sizeof(pg_data_t), PAGE_SIZE); + /* convert size to large (pmd size) pages, rounding up */ + size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES; + /* now the roundup is correct, convert to PAGE_SIZE pages */ + size = size * PTRS_PER_PTE; - /* convert size to large (pmd size) pages, rounding up */ - size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES; - /* now the roundup is correct, convert to PAGE_SIZE pages */ - size = size * PTRS_PER_PTE; + node_kva = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT, + (u64)node_end_pfn[nid] << PAGE_SHIFT, + (u64)size << PAGE_SHIFT, + LARGE_PAGE_BYTES); + if (node_kva == MEMBLOCK_ERROR) + panic("Can not get kva ram\n"); - node_kva = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT, - ((u64)node_end_pfn[nid])<> PAGE_SHIFT); - node_remap_size[nid] = size; - node_remap_offset[nid] = reserve_pages; - reserve_pages += size; - printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of" - " node %d at %llx\n", - size, nid, node_kva >> PAGE_SHIFT); + /* + * prevent kva address below max_low_pfn want it on system + * with less memory later. + * layout will be: KVA address , KVA RAM + * + * we are supposed to only record the one less then + * max_low_pfn but we could have some hole in high memory, + * and it will only check page_is_ram(pfn) && + * !page_is_reserved_early(pfn) to decide to use it as free. + * So memblock_x86_reserve_range here, hope we don't run out + * of that array + */ + memblock_x86_reserve_range(node_kva, + node_kva + ((u64)size << PAGE_SHIFT), + "KVA RAM"); - /* - * prevent kva address below max_low_pfn want it on system - * with less memory later. - * layout will be: KVA address , KVA RAM - * - * we are supposed to only record the one less then max_low_pfn - * but we could have some hole in high memory, and it will only - * check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide - * to use it as free. - * So memblock_x86_reserve_range here, hope we don't run out of that array - */ - memblock_x86_reserve_range(node_kva, - node_kva + (((u64)size)<> PAGE_SHIFT; - node_remap_start_pfn[nid] = node_kva >> PAGE_SHIFT; - } - printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n", - reserve_pages); - return reserve_pages; + return size; } static void init_remap_allocator(int nid) @@ -346,6 +340,7 @@ static void init_remap_allocator(int nid) void __init initmem_init(void) { + unsigned long reserve_pages = 0; int nid; /* @@ -359,7 +354,11 @@ void __init initmem_init(void) get_memcfg_numa(); numa_init_array(); - kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE); + for_each_online_node(nid) + reserve_pages += init_alloc_remap(nid, reserve_pages); + kva_pages = roundup(reserve_pages, PTRS_PER_PTE); + printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n", + reserve_pages); kva_start_pfn = memblock_find_in_range(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT, From c4d4f577d49c441ab4f1bb6068247dafb366e635 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:51 +0200 Subject: [PATCH 126/135] x86-32, numa: Rename @node_kva to @node_pa in init_alloc_remap() init_alloc_remap() is about to do more and using _kva suffix for physical address becomes confusing because the function will be handling both physical and virtual addresses. Rename @node_kva to @node_pa. This is trivial rename and doesn't cause any behavior difference. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-6-git-send-email-tj@kernel.org Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 5039e9b21d9e..30933fec8f75 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -267,7 +267,7 @@ void resume_map_numa_kva(pgd_t *pgd_base) static __init unsigned long init_alloc_remap(int nid, unsigned long offset) { unsigned long size; - u64 node_kva; + u64 node_pa; /* * The acpi/srat node info can show hot-add memroy zones where @@ -291,17 +291,17 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) /* now the roundup is correct, convert to PAGE_SIZE pages */ size = size * PTRS_PER_PTE; - node_kva = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT, - (u64)node_end_pfn[nid] << PAGE_SHIFT, - (u64)size << PAGE_SHIFT, - LARGE_PAGE_BYTES); - if (node_kva == MEMBLOCK_ERROR) + node_pa = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT, + (u64)node_end_pfn[nid] << PAGE_SHIFT, + (u64)size << PAGE_SHIFT, + LARGE_PAGE_BYTES); + if (node_pa == MEMBLOCK_ERROR) panic("Can not get kva ram\n"); node_remap_size[nid] = size; node_remap_offset[nid] = offset; printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of node %d at %llx\n", - size, nid, node_kva >> PAGE_SHIFT); + size, nid, node_pa >> PAGE_SHIFT); /* * prevent kva address below max_low_pfn want it on system @@ -315,11 +315,10 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) * So memblock_x86_reserve_range here, hope we don't run out * of that array */ - memblock_x86_reserve_range(node_kva, - node_kva + ((u64)size << PAGE_SHIFT), + memblock_x86_reserve_range(node_pa, node_pa + ((u64)size << PAGE_SHIFT), "KVA RAM"); - node_remap_start_pfn[nid] = node_kva >> PAGE_SHIFT; + node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT; return size; } From af7c1a6e8374e05aab4a98ce4d2fb07b66506a02 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:52 +0200 Subject: [PATCH 127/135] x86-32, numa: Make @size in init_aloc_remap() represent bytes @size variable in init_alloc_remap() is confusing in that it starts as number of bytes as its name implies and then becomes number of pages. Make it consistently represent bytes. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-7-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 30933fec8f75..99310d26fe34 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -286,22 +286,19 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) size = node_remap_size[nid]; size += ALIGN(sizeof(pg_data_t), PAGE_SIZE); - /* convert size to large (pmd size) pages, rounding up */ - size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES; - /* now the roundup is correct, convert to PAGE_SIZE pages */ - size = size * PTRS_PER_PTE; + /* align to large page */ + size = ALIGN(size, LARGE_PAGE_BYTES); node_pa = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT, (u64)node_end_pfn[nid] << PAGE_SHIFT, - (u64)size << PAGE_SHIFT, - LARGE_PAGE_BYTES); + size, LARGE_PAGE_BYTES); if (node_pa == MEMBLOCK_ERROR) panic("Can not get kva ram\n"); - node_remap_size[nid] = size; + node_remap_size[nid] = size >> PAGE_SHIFT; node_remap_offset[nid] = offset; printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of node %d at %llx\n", - size, nid, node_pa >> PAGE_SHIFT); + size >> PAGE_SHIFT, nid, node_pa >> PAGE_SHIFT); /* * prevent kva address below max_low_pfn want it on system @@ -315,12 +312,11 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) * So memblock_x86_reserve_range here, hope we don't run out * of that array */ - memblock_x86_reserve_range(node_pa, node_pa + ((u64)size << PAGE_SHIFT), - "KVA RAM"); + memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM"); node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT; - return size; + return size >> PAGE_SHIFT; } static void init_remap_allocator(int nid) From 7210cf9217937e470a9acbc113a590f476b9c047 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:53 +0200 Subject: [PATCH 128/135] x86-32, numa: Calculate remap size in common code Only pgdat and memmap use remap area and there isn't much benefit in allowing per-node override. In addition, the use of node_remap_size[] is confusing in that it contains number of bytes before remap initialization and then number of pages afterwards. Move remap size calculation for memap from specific NUMA config implementations to init_alloc_remap() and make node_remap_size[] static. The only behavior difference is that, before this patch, numaq_32 didn't consider max_pfn when calculating the memmap size but it's enforced after this patch, which is the right thing to do. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-8-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/topology.h | 1 - arch/x86/kernel/apic/numaq_32.c | 4 ---- arch/x86/mm/numa_32.c | 10 ++++------ arch/x86/mm/srat_32.c | 1 - 4 files changed, 4 insertions(+), 12 deletions(-) diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 910a7084f7f2..8dba76972fd7 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -95,7 +95,6 @@ extern void setup_node_to_cpumask_map(void); #ifdef CONFIG_X86_32 extern unsigned long node_start_pfn[]; extern unsigned long node_end_pfn[]; -extern unsigned long node_remap_size[]; #define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid]) # define SD_CACHE_NICE_TRIES 1 diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 6273eee5134b..0aced70815f0 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -93,10 +93,6 @@ static inline void numaq_register_node(int node, struct sys_cfg_data *scd) node_end_pfn[node]); memory_present(node, node_start_pfn[node], node_end_pfn[node]); - - node_remap_size[node] = node_memmap_size_bytes(node, - node_start_pfn[node], - node_end_pfn[node]); } /* diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 99310d26fe34..9a7336550f0d 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -104,7 +104,7 @@ extern unsigned long highend_pfn, highstart_pfn; #define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE) -unsigned long node_remap_size[MAX_NUMNODES]; +static unsigned long node_remap_size[MAX_NUMNODES]; static void *node_remap_start_vaddr[MAX_NUMNODES]; void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); @@ -129,7 +129,6 @@ int __init get_memcfg_numa_flat(void) node_end_pfn[0] = max_pfn; memblock_x86_register_active_regions(0, 0, max_pfn); memory_present(0, 0, max_pfn); - node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn); /* Indicate there is one node available. */ nodes_clear(node_online_map); @@ -282,11 +281,10 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) if (node_end_pfn[nid] > max_pfn) node_end_pfn[nid] = max_pfn; - /* ensure the remap includes space for the pgdat. */ - size = node_remap_size[nid]; + /* calculate the necessary space aligned to large page size */ + size = node_memmap_size_bytes(nid, node_start_pfn[nid], + min(node_end_pfn[nid], max_pfn)); size += ALIGN(sizeof(pg_data_t), PAGE_SIZE); - - /* align to large page */ size = ALIGN(size, LARGE_PAGE_BYTES); node_pa = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT, diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index 48651c6f657d..1b9e82c96dc5 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -276,7 +276,6 @@ int __init get_memcfg_from_srat(void) unsigned long end = min(node_end_pfn[nid], max_pfn); memory_present(nid, start, end); - node_remap_size[nid] = node_memmap_size_bytes(nid, start, end); } return 1; out_fail: From 82044c328d6f6b22882c2a936e487e6d2240817a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:54 +0200 Subject: [PATCH 129/135] x86-32, numa: Make init_alloc_remap() less panicky Remap allocator failure isn't fatal. The callers are required to fall back to regular early memory allocation mechanisms on failure anyway, so there's no reason to panic on remap init failure. Whining and returning are enough. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-9-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 9a7336550f0d..c127543372f5 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -290,8 +290,11 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) node_pa = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT, (u64)node_end_pfn[nid] << PAGE_SHIFT, size, LARGE_PAGE_BYTES); - if (node_pa == MEMBLOCK_ERROR) - panic("Can not get kva ram\n"); + if (node_pa == MEMBLOCK_ERROR) { + pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n", + size, nid); + return 0; + } node_remap_size[nid] = size >> PAGE_SHIFT; node_remap_offset[nid] = offset; From 0e9f93c1c04c8ab10cc564df54a7ad0f83c67796 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:55 +0200 Subject: [PATCH 130/135] x86-32, numa: Move lowmem address space reservation to init_alloc_remap() Remap alloc init is done in the following stages. 1. init_alloc_remap() calculates how much memory is necessary for each node and reserves node local memory. 2. initmem_init() collects how much each node needs and reserves a single contiguous lowmem area which can contain all. 3. init_remap_allocator() initializes allocator parameters from the determined lowmem address and per-node offsets. 4. Actual remap happens. There is no reason for the lowmem remap area to be reserved as a single contiguous area at one go. They don't interact with each other and the memblock allocator will put them side-by-side anyway. This patch breaks up the single lowmem address reservation and put per-node lowmem address reservation into init_alloc_remap() and initializes allocator parameters directly in the function as all the addresses are determined there. This merges steps 2 and 3 into 1. While at it, remove now largely irrelevant comments in init_alloc_remap(). This change causes the following behavior changes. * Remap lowmem areas are allocated in smaller per-node chunks. * Remap lowmem area reservation failure fail future remap allocations instead of panicking. * Remap allocator initialization is less verbose. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 84 ++++++++++++++----------------------------- 1 file changed, 26 insertions(+), 58 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index c127543372f5..12bb34c434ea 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -108,9 +108,6 @@ static unsigned long node_remap_size[MAX_NUMNODES]; static void *node_remap_start_vaddr[MAX_NUMNODES]; void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); -static unsigned long kva_start_pfn; -static unsigned long kva_pages; - int __cpuinit numa_cpu_node(int cpu) { return apic->x86_32_numa_cpu_node(cpu); @@ -266,7 +263,8 @@ void resume_map_numa_kva(pgd_t *pgd_base) static __init unsigned long init_alloc_remap(int nid, unsigned long offset) { unsigned long size; - u64 node_pa; + u64 node_pa, remap_pa; + void *remap_va; /* * The acpi/srat node info can show hot-add memroy zones where @@ -287,6 +285,7 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) size += ALIGN(sizeof(pg_data_t), PAGE_SIZE); size = ALIGN(size, LARGE_PAGE_BYTES); + /* allocate node memory and the lowmem remap area */ node_pa = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT, (u64)node_end_pfn[nid] << PAGE_SHIFT, size, LARGE_PAGE_BYTES); @@ -295,45 +294,35 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) size, nid); return 0; } - - node_remap_size[nid] = size >> PAGE_SHIFT; - node_remap_offset[nid] = offset; - printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of node %d at %llx\n", - size >> PAGE_SHIFT, nid, node_pa >> PAGE_SHIFT); - - /* - * prevent kva address below max_low_pfn want it on system - * with less memory later. - * layout will be: KVA address , KVA RAM - * - * we are supposed to only record the one less then - * max_low_pfn but we could have some hole in high memory, - * and it will only check page_is_ram(pfn) && - * !page_is_reserved_early(pfn) to decide to use it as free. - * So memblock_x86_reserve_range here, hope we don't run out - * of that array - */ memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM"); + remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT, + max_low_pfn << PAGE_SHIFT, + size, LARGE_PAGE_BYTES); + if (remap_pa == MEMBLOCK_ERROR) { + pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n", + size, nid); + memblock_x86_free_range(node_pa, node_pa + size); + return 0; + } + memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG"); + remap_va = phys_to_virt(remap_pa); + + /* initialize remap allocator parameters */ node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT; + node_remap_size[nid] = size >> PAGE_SHIFT; + node_remap_offset[nid] = offset; + + node_remap_start_vaddr[nid] = remap_va; + node_remap_end_vaddr[nid] = remap_va + size; + node_remap_alloc_vaddr[nid] = remap_va + ALIGN(sizeof(pg_data_t), PAGE_SIZE); + + printk(KERN_DEBUG "remap_alloc: node %d [%08llx-%08llx) -> [%p-%p)\n", + nid, node_pa, node_pa + size, remap_va, remap_va + size); return size >> PAGE_SHIFT; } -static void init_remap_allocator(int nid) -{ - node_remap_start_vaddr[nid] = pfn_to_kaddr( - kva_start_pfn + node_remap_offset[nid]); - node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] + - (node_remap_size[nid] * PAGE_SIZE); - node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] + - ALIGN(sizeof(pg_data_t), PAGE_SIZE); - - printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid, - (ulong) node_remap_start_vaddr[nid], - (ulong) node_remap_end_vaddr[nid]); -} - void __init initmem_init(void) { unsigned long reserve_pages = 0; @@ -352,25 +341,7 @@ void __init initmem_init(void) for_each_online_node(nid) reserve_pages += init_alloc_remap(nid, reserve_pages); - kva_pages = roundup(reserve_pages, PTRS_PER_PTE); - printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n", - reserve_pages); - kva_start_pfn = memblock_find_in_range(min_low_pfn << PAGE_SHIFT, - max_low_pfn << PAGE_SHIFT, - kva_pages << PAGE_SHIFT, - PTRS_PER_PTE << PAGE_SHIFT) >> PAGE_SHIFT; - if (kva_start_pfn == MEMBLOCK_ERROR) - panic("Can not get kva space\n"); - - printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n", - kva_start_pfn, max_low_pfn); - printk(KERN_INFO "max_pfn = %lx\n", max_pfn); - - /* avoid clash with initrd */ - memblock_x86_reserve_range(kva_start_pfn< max_low_pfn) @@ -390,11 +361,8 @@ void __init initmem_init(void) printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n", (ulong) pfn_to_kaddr(max_low_pfn)); - for_each_online_node(nid) { - init_remap_allocator(nid); - + for_each_online_node(nid) allocate_pgdat(nid); - } remap_numa_kva(); printk(KERN_DEBUG "High memory starts at vaddr %08lx\n", From 2a286344f06d6341740b284494379373e87648f7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:56 +0200 Subject: [PATCH 131/135] x86-32, numa: Move remapping for remap allocator into init_alloc_remap() There's no reason to perform the actual remapping separately. Collapse remap_numa_kva() into init_alloc_remap() and, while at it, make it less verbose. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-11-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 29 +++++++---------------------- 1 file changed, 7 insertions(+), 22 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 12bb34c434ea..53ec13a17b9a 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -205,26 +205,6 @@ void *alloc_remap(int nid, unsigned long size) return allocation; } -static void __init remap_numa_kva(void) -{ - void *vaddr; - unsigned long pfn; - int node; - - for_each_online_node(node) { - printk(KERN_DEBUG "remap_numa_kva: node %d\n", node); - for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) { - vaddr = node_remap_start_vaddr[node]+(pfn<> PAGE_SHIFT; pfn += PTRS_PER_PTE) + set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT), + (node_pa >> PAGE_SHIFT) + pfn, + PAGE_KERNEL_LARGE); + /* initialize remap allocator parameters */ node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT; node_remap_size[nid] = size >> PAGE_SHIFT; @@ -363,7 +349,6 @@ void __init initmem_init(void) (ulong) pfn_to_kaddr(max_low_pfn)); for_each_online_node(nid) allocate_pgdat(nid); - remap_numa_kva(); printk(KERN_DEBUG "High memory starts at vaddr %08lx\n", (ulong) pfn_to_kaddr(highstart_pfn)); From b2e3e4fa3eee752b893687783f2a427106c93423 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:57 +0200 Subject: [PATCH 132/135] x86-32, numa: Make pgdat allocation use alloc_remap() pgdat allocation is handled differnetly from other remap allocations - it's reserved during initialization. There's no reason to handle this any differnetly. Remap allocator is initialized for every node and if init failed the allocation will fail and pgdat allocation can fall back to generic code like anyone else. Remove special init-time pgdat reservation and make allocate_pgdat() use alloc_remap() like everyone else. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-12-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 53ec13a17b9a..0184a9f5a345 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -160,9 +160,8 @@ static void __init allocate_pgdat(int nid) { char buf[16]; - if (node_has_online_mem(nid) && node_remap_start_vaddr[nid]) - NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; - else { + NODE_DATA(nid) = alloc_remap(nid, ALIGN(sizeof(pg_data_t), PAGE_SIZE)); + if (!NODE_DATA(nid)) { unsigned long pgdat_phys; pgdat_phys = memblock_find_in_range(min_low_pfn< [%p-%p)\n", nid, node_pa, node_pa + size, remap_va, remap_va + size); From 1d85b61baf0334dd6bb88261bec42b808204d694 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:58 +0200 Subject: [PATCH 133/135] x86-32, numa: Remove now useless node_remap_offset[] With lowmem address reservation moved into init_alloc_remap(), node_remap_offset[] is no longer useful. Remove it and related offset handling code. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-13-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 0184a9f5a345..960ea7bc0ac7 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -187,7 +187,6 @@ static void __init allocate_pgdat(int nid) static unsigned long node_remap_start_pfn[MAX_NUMNODES]; static void *node_remap_end_vaddr[MAX_NUMNODES]; static void *node_remap_alloc_vaddr[MAX_NUMNODES]; -static unsigned long node_remap_offset[MAX_NUMNODES]; void *alloc_remap(int nid, unsigned long size) { @@ -239,7 +238,7 @@ void resume_map_numa_kva(pgd_t *pgd_base) } #endif -static __init unsigned long init_alloc_remap(int nid, unsigned long offset) +static __init void init_alloc_remap(int nid) { unsigned long size, pfn; u64 node_pa, remap_pa; @@ -252,9 +251,9 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n", nid, node_start_pfn[nid], node_end_pfn[nid]); if (node_start_pfn[nid] > max_pfn) - return 0; + return; if (!node_end_pfn[nid]) - return 0; + return; if (node_end_pfn[nid] > max_pfn) node_end_pfn[nid] = max_pfn; @@ -271,7 +270,7 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) if (node_pa == MEMBLOCK_ERROR) { pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n", size, nid); - return 0; + return; } memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM"); @@ -282,7 +281,7 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n", size, nid); memblock_x86_free_range(node_pa, node_pa + size); - return 0; + return; } memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG"); remap_va = phys_to_virt(remap_pa); @@ -296,7 +295,6 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) /* initialize remap allocator parameters */ node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT; node_remap_size[nid] = size >> PAGE_SHIFT; - node_remap_offset[nid] = offset; node_remap_start_vaddr[nid] = remap_va; node_remap_end_vaddr[nid] = remap_va + size; @@ -304,13 +302,10 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset) printk(KERN_DEBUG "remap_alloc: node %d [%08llx-%08llx) -> [%p-%p)\n", nid, node_pa, node_pa + size, remap_va, remap_va + size); - - return size >> PAGE_SHIFT; } void __init initmem_init(void) { - unsigned long reserve_pages = 0; int nid; /* @@ -325,7 +320,7 @@ void __init initmem_init(void) numa_init_array(); for_each_online_node(nid) - reserve_pages += init_alloc_remap(nid, reserve_pages); + init_alloc_remap(nid); #ifdef CONFIG_HIGHMEM highstart_pfn = highend_pfn = max_pfn; From 198bd06bbfde2984027e91f64c55eb19a7034a27 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:23:59 +0200 Subject: [PATCH 134/135] x86-32, numa: Remove redundant node_remap_size[] Remap area size can be determined from node_remap_start_vaddr[] and node_remap_end_vaddr[] making node_remap_size[] redundant. Remove it. While at it, make resume_map_numa_kva() use @nr_pages for number of pages instead of @size. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-14-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 960ea7bc0ac7..f325e6fab75b 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -104,7 +104,6 @@ extern unsigned long highend_pfn, highstart_pfn; #define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE) -static unsigned long node_remap_size[MAX_NUMNODES]; static void *node_remap_start_vaddr[MAX_NUMNODES]; void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); @@ -214,15 +213,16 @@ void resume_map_numa_kva(pgd_t *pgd_base) int node; for_each_online_node(node) { - unsigned long start_va, start_pfn, size, pfn; + unsigned long start_va, start_pfn, nr_pages, pfn; start_va = (unsigned long)node_remap_start_vaddr[node]; start_pfn = node_remap_start_pfn[node]; - size = node_remap_size[node]; + nr_pages = (node_remap_end_vaddr[node] - + node_remap_start_vaddr[node]) >> PAGE_SHIFT; printk(KERN_DEBUG "%s: node %d\n", __func__, node); - for (pfn = 0; pfn < size; pfn += PTRS_PER_PTE) { + for (pfn = 0; pfn < nr_pages; pfn += PTRS_PER_PTE) { unsigned long vaddr = start_va + (pfn << PAGE_SHIFT); pgd_t *pgd = pgd_base + pgd_index(vaddr); pud_t *pud = pud_offset(pgd, vaddr); @@ -294,8 +294,6 @@ static __init void init_alloc_remap(int nid) /* initialize remap allocator parameters */ node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT; - node_remap_size[nid] = size >> PAGE_SHIFT; - node_remap_start_vaddr[nid] = remap_va; node_remap_end_vaddr[nid] = remap_va + size; node_remap_alloc_vaddr[nid] = remap_va; From 993ba1585cbb03fab012e41d1a5d24330a283b31 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 5 Apr 2011 00:24:00 +0200 Subject: [PATCH 135/135] x86-32, numa: Update remap allocator comments Now that remap allocator is cleaned up, update comments such that they are in docbook function description format and reflect the actual implementation. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1301955840-7246-15-git-send-email-tj@kernel.org Acked-by: Yinghai Lu Cc: David Rientjes Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_32.c | 56 ++++++++++++++++++++++++++++++++----------- 1 file changed, 42 insertions(+), 14 deletions(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index f325e6fab75b..c757c0a3b529 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -176,17 +176,31 @@ static void __init allocate_pgdat(int nid) } /* - * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel - * virtual address space (KVA) is reserved and portions of nodes are mapped - * using it. This is to allow node-local memory to be allocated for - * structures that would normally require ZONE_NORMAL. The memory is - * allocated with alloc_remap() and callers should be prepared to allocate - * from the bootmem allocator instead. + * Remap memory allocator */ static unsigned long node_remap_start_pfn[MAX_NUMNODES]; static void *node_remap_end_vaddr[MAX_NUMNODES]; static void *node_remap_alloc_vaddr[MAX_NUMNODES]; +/** + * alloc_remap - Allocate remapped memory + * @nid: NUMA node to allocate memory from + * @size: The size of allocation + * + * Allocate @size bytes from the remap area of NUMA node @nid. The + * size of the remap area is predetermined by init_alloc_remap() and + * only the callers considered there should call this function. For + * more info, please read the comment on top of init_alloc_remap(). + * + * The caller must be ready to handle allocation failure from this + * function and fall back to regular memory allocator in such cases. + * + * CONTEXT: + * Single CPU early boot context. + * + * RETURNS: + * Pointer to the allocated memory on success, %NULL on failure. + */ void *alloc_remap(int nid, unsigned long size) { void *allocation = node_remap_alloc_vaddr[nid]; @@ -238,6 +252,28 @@ void resume_map_numa_kva(pgd_t *pgd_base) } #endif +/** + * init_alloc_remap - Initialize remap allocator for a NUMA node + * @nid: NUMA node to initizlie remap allocator for + * + * NUMA nodes may end up without any lowmem. As allocating pgdat and + * memmap on a different node with lowmem is inefficient, a special + * remap allocator is implemented which can be used by alloc_remap(). + * + * For each node, the amount of memory which will be necessary for + * pgdat and memmap is calculated and two memory areas of the size are + * allocated - one in the node and the other in lowmem; then, the area + * in the node is remapped to the lowmem area. + * + * As pgdat and memmap must be allocated in lowmem anyway, this + * doesn't waste lowmem address space; however, the actual lowmem + * which gets remapped over is wasted. The amount shouldn't be + * problematic on machines this feature will be used. + * + * Initialization failure isn't fatal. alloc_remap() is used + * opportunistically and the callers will fall back to other memory + * allocation mechanisms on failure. + */ static __init void init_alloc_remap(int nid) { unsigned long size, pfn; @@ -306,14 +342,6 @@ void __init initmem_init(void) { int nid; - /* - * When mapping a NUMA machine we allocate the node_mem_map arrays - * from node local memory. They are then mapped directly into KVA - * between zone normal and vmalloc space. Calculate the size of - * this space and use it to adjust the boundary between ZONE_NORMAL - * and ZONE_HIGHMEM. - */ - get_memcfg_numa(); numa_init_array();